Create example code for a Dumb IR repeater. #737
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
The program endlessly listens for and repeats back any IR messages it gets. It is dumb in that it doesn't try to understand the messages. It just repeats back what ever it heard. It only replays back at a fixed frequency. e.g. a 40kHz signal will be re-transmitted at 38kHz. It should work for most messages however. This is NOT meant to be useful code, it is just example code.
darshkpatel
approved these changes
Jun 8, 2019
|
@darshkpatel Thanks again for the prompt review. Could I ask you to cast an eye over some of the other pending PRs too? |
|
Sure thing |
|
Excellent. Thanks in advance! |
crankyoldgit
added a commit
that referenced
this pull request
Jun 9, 2019
_v2.6.1 (20190609)_ **[Breaking Changes]** - Major rework/breaking changes to Argo A/C support. (#705) **[Bug Fixes]** - Correct `set/getQuiet` for Samsung A/C (#736) - Add missing `on/off()` to IRCoolixAC class. (#725) - Daikin `set/getEye()` uses wrong bit. (#711) - IRMQTTServer: Continue to use same Temperature units. (#710) - Fixed a bug with `setMode()`/`getMode()` for HAIER_AC. (#705) **[Features]** - Add set/getPowerful for Samsung A/C (#736) - Add `calibrate()` to all the A/C classes. (#735) - IRMQTTServer: Add sequencing for sending MQTT IR commands. (#723) - Add support for Fujitsu AR-REB1E & AR-JW2 remotes. (#718) - Add Beta `decodeTrotec()` support. (#719) - Add experimental `decodeArgo()` support. (#717) - Support for Goodweather A/Cs. (#715) - Add `DISABLE_CAPTURE_WHILE_TRANSMITTING` feature to IRMQTTServer. (#713) - Support for Lixil Inax Toilet protocol. (#712) - Add `set/getWeeklyTimerEnable()` to Daikin (#711) - IRMQTTServer: Update Common A/C settings based on received IR messages. (#705) - Add day of week to DAIKIN protocol (#699) - Add limited support for Sharp A/C (#696) - SAMSUNG_AC: Make sure special power mode messages are sent. (#695) - Add `set/getPowerful()` (turbo) to DAIKIN216 (#693) **[Misc]** - Add kPeriodOffset for CPU Freq of 160MHz. (#729) - Example code for a Dumb IR repeater. (#737) - Update swing handling for Fujitsu A/Cs. (#724) - Add function to convert decode_results to sendRaw() array. (#721) - Attempt to reduce heap fragmentation from strings. (#707) - Update Fujitsu A/C example code to safer settings (#716) - Enforce better `const` usage in IRUtils. (#708) - Attempt to reduce heap fragmentation by A/C `toString()`s. (#694) - Minor changes to DAIKIN216 timings and features. (#693)
crankyoldgit
added a commit
that referenced
this pull request
Jun 9, 2019
_v2.6.1 (20190609)_ **[Breaking Changes]** - Major rework/breaking changes to Argo A/C support. (#705) **[Bug Fixes]** - Correct `set/getQuiet` for Samsung A/C (#736) - Add missing `on/off()` to IRCoolixAC class. (#725) - Daikin `set/getEye()` uses wrong bit. (#711) - IRMQTTServer: Continue to use same Temperature units. (#710) - Fixed a bug with `setMode()`/`getMode()` for HAIER_AC. (#705) **[Features]** - Add set/getPowerful for Samsung A/C (#736) - Add `calibrate()` to all the A/C classes. (#735) - IRMQTTServer: Add sequencing for sending MQTT IR commands. (#723) - Add support for Fujitsu AR-REB1E & AR-JW2 remotes. (#718) - Add Beta `decodeTrotec()` support. (#719) - Add experimental `decodeArgo()` support. (#717) - Support for Goodweather A/Cs. (#715) - Add `DISABLE_CAPTURE_WHILE_TRANSMITTING` feature to IRMQTTServer. (#713) - Support for Lixil Inax Toilet protocol. (#712) - Add `set/getWeeklyTimerEnable()` to Daikin (#711) - IRMQTTServer: Update Common A/C settings based on received IR messages. (#705) - Add day of week to DAIKIN protocol (#699) - Add limited support for Sharp A/C (#696) - SAMSUNG_AC: Make sure special power mode messages are sent. (#695) - Add `set/getPowerful()` (turbo) to DAIKIN216 (#693) **[Misc]** - Add kPeriodOffset for CPU Freq of 160MHz. (#729) - Example code for a Dumb IR repeater. (#737) - Update swing handling for Fujitsu A/Cs. (#724) - Add function to convert decode_results to sendRaw() array. (#721) - Attempt to reduce heap fragmentation from strings. (#707) - Update Fujitsu A/C example code to safer settings (#716) - Enforce better `const` usage in IRUtils. (#708) - Attempt to reduce heap fragmentation by A/C `toString()`s. (#694) - Minor changes to DAIKIN216 timings and features. (#693)
Merged
crankyoldgit
added a commit
that referenced
this pull request
Jun 9, 2019
_v2.6.1 (20190609)_ **[Breaking Changes]** - Major rework/breaking changes to Argo A/C support. (#705) **[Bug Fixes]** - Correct `set/getQuiet` for Samsung A/C (#736) - Add missing `on/off()` to IRCoolixAC class. (#725) - Daikin `set/getEye()` uses wrong bit. (#711) - IRMQTTServer: Continue to use same Temperature units. (#710) - Fixed a bug with `setMode()`/`getMode()` for HAIER_AC. (#705) **[Features]** - Add set/getPowerful for Samsung A/C (#736) - Add `calibrate()` to all the A/C classes. (#735) - IRMQTTServer: Add sequencing for sending MQTT IR commands. (#723) - Add support for Fujitsu AR-REB1E & AR-JW2 remotes. (#718) - Add Beta `decodeTrotec()` support. (#719) - Add experimental `decodeArgo()` support. (#717) - Support for Goodweather A/Cs. (#715) - Add `DISABLE_CAPTURE_WHILE_TRANSMITTING` feature to IRMQTTServer. (#713) - Support for Lixil Inax Toilet protocol. (#712) - Add `set/getWeeklyTimerEnable()` to Daikin (#711) - IRMQTTServer: Update Common A/C settings based on received IR messages. (#705) - Add day of week to DAIKIN protocol (#699) - Add limited support for Sharp A/C (#696) - SAMSUNG_AC: Make sure special power mode messages are sent. (#695) - Add `set/getPowerful()` (turbo) to DAIKIN216 (#693) **[Misc]** - Add kPeriodOffset for CPU Freq of 160MHz. (#729) - Example code for a Dumb IR repeater. (#737) - Update swing handling for Fujitsu A/Cs. (#724) - Add function to convert decode_results to sendRaw() array. (#721) - Attempt to reduce heap fragmentation from strings. (#707) - Update Fujitsu A/C example code to safer settings (#716) - Enforce better `const` usage in IRUtils. (#708) - Attempt to reduce heap fragmentation by A/C `toString()`s. (#694) - Minor changes to DAIKIN216 timings and features. (#693)
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
The program endlessly listens for and repeats back any IR messages it gets.
It is dumb in that it doesn't try to understand the messages. It just
repeats back what ever it heard. It only replays back at a fixed
frequency.
e.g. a 40kHz signal will be re-transmitted at 38kHz.
It should work for most messages however.
This is NOT meant to be useful code, it is just example code.