csamsel
Follow
Senior Consultant for Connected Car projects at @ValtechMobility.
@RWTH-i5-IDSG alumni.
- Düsseldorf, Germany
-
09:33
(UTC +01:00) - https://www.valtech-mobility.com/
- https://orcid.org/0000-0003-1964-188X
- @oxygenx_
Pinned Loading
-
steve-community/steve
steve-community/steve PublicSteVe - OCPP server implementation in Java
-
flowgrind/flowgrind
flowgrind/flowgrind PublicAdvanced TCP traffic generator for Linux, FreeBSD, and Mac OS X
-
Revert Ubiquiti NanoStation Loco M2 ...
Revert Ubiquiti NanoStation Loco M2 XW/XM to not signed 1Need the following tools: binwalk, squashfs-tools
23The tutorial will probably work with similar devices, but i havent tested it.
4Adjust the firmware files.
5 -
Switch HPE HBA H240 from raid mode t...
Switch HPE HBA H240 from raid mode to hba mode. 1# So you want switch your HPE H240 controller to HBA mode for use with ESXi or UnRaid?
23# online you'll find the follow command for HP controllers, like the P420i.
4ssacli controller slot=0 modify hbamode=on
5 -
Increase btrfs gpt partition after e...
Increase btrfs gpt partition after enlarging the virtual drive 1oxygen-system-vm ~ # fdisk -l /dev/sda
2GPT PMBR size mismatch (41943039 != 62914559) will be corrected by w(rite).
3Disk /dev/sda: 30 GiB, 32212254720 bytes, 62914560 sectors
4Units: sectors of 1 * 512 = 512 bytes
5Sector size (logical/physical): 512 bytes / 512 bytes
-
activate power management on sas drives
activate power management on sas drives 1# disable background scan (might prevent standby)
2sdparm --quiet --clear=EN_BMS --save /dev/disk/by-id/scsi-?????????????????
3# enable standby (powers down drive motor)
4sdparm --flexible --quiet --save -p po --set=STANDBY=1 /dev/disk/by-id/scsi-?????????????????
5# set standby to 30min
Something went wrong, please refresh the page to try again.
If the problem persists, check the GitHub status page or contact support.
If the problem persists, check the GitHub status page or contact support.