Replies: 14 comments
-
Hi, This is the output of the program on my Ryzen 7 5800H
|
Beta Was this translation helpful? Give feedback.
-
Thank you very much. zencli is decoding 2 DIMMs 4GB each. Is this what your setup has ? |
Beta Was this translation helpful? Give feedback.
-
no, my machine is configured with 2x8GB module |
Beta Was this translation helpful? Give feedback.
-
Can you pull, build and run the latest The output I would like to examine:
|
Beta Was this translation helpful? Give feedback.
-
Hi
kernel load command: |
Beta Was this translation helpful? Give feedback.
-
@nhattu1986 Thanks. Something I don't understand with this APU which queries no UMC data from driver. |
Beta Was this translation helpful? Give feedback.
-
Can you try UMC again but make sure without the Like:
|
Beta Was this translation helpful? Give feedback.
-
Hi, Running the kernel module without parameter still not yield any output
|
Beta Was this translation helpful? Give feedback.
-
I have to put traces in driver to follow the callflow. EDIT: was |
Beta Was this translation helpful? Give feedback.
-
@nhattu1986 Can you please run the attached archive ? To avoid any API conflict, make sure any other versions of CoreFreq is unloaded/uninstalled/removed from your disk. Only this archive has to be Your kernel log should dump some traces as below:
|
Beta Was this translation helpful? Give feedback.
-
Hi This is the kernel output:
|
Beta Was this translation helpful? Give feedback.
-
@nhattu1986 Hello, can you pull latest I would like the output EDIT: expected topology (according to M471A1K43EB1-CWE specs)
|
Beta Was this translation helpful? Give feedback.
-
Hi @cyring I'm building the latest develop branch and got the output:
|
Beta Was this translation helpful? Give feedback.
-
Thanks a lot for your contribution. Wiki CPU support page is updated with Ryzen 7 5800H This development is also available in the CoreFreq ISO image @ www.cyring.fr Other features can also be tested with Cezanne:
|
Beta Was this translation helpful? Give feedback.
-
Hello
The targeted processors have a CPUID signature among the following:
[Zen3/Vermeer]
AF_21h
56214-B0-PUB_3.05_PPR.pdf
[Zen3/Cezanne]
AF_50h
56569-A1-PUB_3.03_ppr.pdf
[EPYC/Milan]
AF_01h
-
[EPYC/Milan-X]
AF_01h
-
[Zen3/Chagall]
AF_08h
-
[Zen3/Badami]
AF_30h
-
[Zen3+ Rembrandt]
AF_44h
-
Can anyone give a try to the
develop
branch of CoreFreq next version1.92
and post the output of the Client (corefreq-cli -s -n -m -n -M -n -B -n -k -n -C 1
)Thanks for any help
Beta Was this translation helpful? Give feedback.
All reactions