4.14 hdmi #3

d3adme4t · 2018-06-04T07:25:06Z

No description provided.

[ Upstream commit 1f110e7 ] when the following command # tc action add action sample rate 100 group 100 index 100 is run for the first time, and psample_group_get(100) fails to create a new group, tcf_sample_cleanup() calls psample_group_put(NULL), thus causing the following error: BUG: unable to handle kernel NULL pointer dereference at 000000000000001c IP: psample_group_put+0x15/0x71 [psample] PGD 8000000075775067 P4D 8000000075775067 PUD 7453c067 PMD 0 Oops: 0002 [#1] SMP PTI Modules linked in: act_sample(E) psample ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core mbcache jbd2 crct10dif_pclmul snd_hwdep crc32_pclmul snd_seq ghash_clmulni_intel pcbc snd_seq_device snd_pcm aesni_intel crypto_simd snd_timer glue_helper snd cryptd joydev pcspkr i2c_piix4 soundcore virtio_balloon nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_net ata_piix virtio_console virtio_blk libata serio_raw crc32c_intel virtio_pci i2c_core virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_tunnel_key] CPU: 2 PID: 5740 Comm: tc Tainted: G E 4.16.0-rc4.act_vlan.orig+ #403 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:psample_group_put+0x15/0x71 [psample] RSP: 0018:ffffb8a80032f7d0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000024 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffffffc06d93c0 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 R10: 00000000bd003000 R11: ffff979fba04aa59 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff979fbba3f22c FS: 00007f7638112740(0000) GS:ffff979fbfd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 00000000734ea001 CR4: 00000000001606e0 Call Trace: __tcf_idr_release+0x79/0xf0 tcf_sample_init+0x125/0x1d0 [act_sample] tcf_action_init_1+0x2cc/0x430 tcf_action_init+0xd3/0x1b0 tc_ctl_action+0x18b/0x240 rtnetlink_rcv_msg+0x29c/0x310 ? _cond_resched+0x15/0x30 ? __kmalloc_node_track_caller+0x1b9/0x270 ? rtnl_calcit.isra.28+0x100/0x100 netlink_rcv_skb+0xd2/0x110 netlink_unicast+0x17c/0x230 netlink_sendmsg+0x2cd/0x3c0 sock_sendmsg+0x30/0x40 ___sys_sendmsg+0x27a/0x290 ? filemap_map_pages+0x34a/0x3a0 ? __handle_mm_fault+0xbfd/0xe20 __sys_sendmsg+0x51/0x90 do_syscall_64+0x6e/0x1a0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7f7637523ba0 RSP: 002b:00007fff0473ef58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fff0473f080 RCX: 00007f7637523ba0 RDX: 0000000000000000 RSI: 00007fff0473efd0 RDI: 0000000000000003 RBP: 000000005aaaac80 R08: 0000000000000002 R09: 0000000000000000 R10: 00007fff0473e9e0 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff0473f094 R14: 0000000000000001 R15: 0000000000669f60 Code: be 02 00 00 00 48 89 df e8 a9 fe ff ff e9 7c ff ff ff 0f 1f 40 00 0f 1f 44 00 00 53 48 89 fb 48 c7 c7 c0 93 6d c0 e8 db 20 8c ef <83> 6b 1c 01 74 10 48 c7 c7 c0 93 6d c0 ff 14 25 e8 83 83 b0 5b RIP: psample_group_put+0x15/0x71 [psample] RSP: ffffb8a80032f7d0 CR2: 000000000000001c Fix it in tcf_sample_cleanup(), ensuring that calls to psample_group_put(p) are done only when p is not NULL. Fixes: cadb9c9 ("net/sched: act_sample: Fix error path in init") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fc04fdb ] batadv_check_unicast_ttvn may redirect a packet to itself or another originator. This involves rewriting the ttvn and the destination address in the batadv unicast header. These field were not yet pulled (with skb rcsum update) and thus any change to them also requires a change in the receive checksum. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Fixes: a73105b ("batman-adv: improved client announcement mechanism") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit dd1df24 ] This re-introduces the effect of commit a324523 ("vti4: Don't count header length twice.") which was accidentally reverted by merge commit f895f0c ("Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec"). The commit message from Steffen Klassert said: We currently count the size of LL_MAX_HEADER and struct iphdr twice for vti4 devices, this leads to a wrong device mtu. The size of LL_MAX_HEADER and struct iphdr is already counted in ip_tunnel_bind_dev(), so don't do it again in vti_tunnel_init(). And this is still the case now: ip_tunnel_bind_dev() already accounts for the header length of the link layer (not necessarily LL_MAX_HEADER, if the output device is found), plus one IP header. For example, with a vti device on top of veth, with MTU of 1500, the existing implementation would set the initial vti MTU to 1332, accounting once for LL_MAX_HEADER (128, included in hard_header_len by vti) and twice for the same IP header (once from hard_header_len, once from ip_tunnel_bind_dev()). It should instead be 1480, because ip_tunnel_bind_dev() is able to figure out that the output device is veth, so no additional link layer header is attached, and will properly count one single IP header. The existing issue had the side effect of avoiding PMTUD for most xfrm policies, by arbitrarily lowering the initial MTU. However, the only way to get a consistent PMTU value is to let the xfrm PMTU discovery do its course, and commit d6af1a3 ("vti: Add pmtu handling to vti_xmit.") now takes care of local delivery cases where the application ignores local socket notifications. Fixes: b9959fd ("vti: switch to new ip tunnel code") Fixes: f895f0c ("Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 24fc797 ] Otherwise, it's possible to specify invalid MTU values directly on creation of a link (via 'ip link add'). This is already prevented on subsequent MTU changes by commit b96f9af ("ipv4/6: use core net MTU range checking"). Fixes: c544193 ("GRE: Refactor GRE tunneling code.") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 03080e5 ] Don't hardcode a MTU value on vti tunnel initialization, ip_tunnel_newlink() is able to deal with this already. See also commit ffc2b6e ("ip_gre: fix IFLA_MTU ignored on NEWLINK"). Fixes: 1181412 ("net/ipv4: VTI support new module for ip_vti.") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f8a554b ] We shouldn't allow a tunnel to have IP_MAX_MTU as MTU, because another IPv6 header is going on top of our packets. Without this patch, we might end up building packets bigger than IP_MAX_MTU. Fixes: b96f9af ("ipv4/6: use core net MTU range checking") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 19125cb ] After switching to a new channel, driver schedules session protection time event in order to hear the beacon on the new channel. The duration of the protection is two beacon intervals. However, since we start to switch slightly before beacon with count 1, in case we don't hear (or AP doesn't transmit) the very first beacon on the new channel the protection ends without hearing any beacon at all. At this stage the switch is not complete, the queues are closed and the interface doesn't have quota yet or TBTT events. As the result, we are stuck forever waiting for iwl_mvm_post_channel_switch() to be called. Fix this by increasing the protection time to be 3 beacon intervals and in addition drop the connection if the time event ends before we got any beacon. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4b38790 ] When a queue is reserved for aggregation, the queue id is assigned to the tid_data. This is fine since iwl_mvm_sta_tx_agg_oper() takes care of allocating the queue before actual tx starts. When the reservation is cancelled (e.g. when the AP declined the aggregation request) the tid_data is not cleared. As a result, following tx for this tid was trying to use an unallocated queue. Fix this by setting the txq_id for the tid to invalid when unreserving the queue. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit df65c8d ] If the driver failed to resume from D3, it is possible that it has no valid aux station. In such case, fw restart will end up in sending station related commands with an invalid station id, which will result in an assert. Fix this by allocating a new station id for the aux station if it does not have a valid id even in the case of fw restart. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4a6d2e5 ] When starting aggregation, the code checks the status of the queue allocated to the aggregation tid, which might not yet be allocated and thus the queue index may be invalid. Fix this by reserving a new queue in case the queue id is invalid. While at it, clean up some unreachable code (a condition that is already handled earlier) and remove all the non-DQA comments since non-DQA mode is no longer supported. Fixes: cf961e1 ("iwlwifi: mvm: support dqa-mode agg on non-shared queue") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 192b4af ] Since commit 846c7df ("drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2."), removing the last framebuffer will no longer disable the corresponding pipeline, which causes the KMS core to complain about leaked connectors on driver unbind. Fix this by calling drm_atomic_helper_shutdown() on driver unbind, which will cause all display pipelines to be shut down and therefore drop the extra references on the connectors. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c917e0f ] When a perf_event is attached to parent cgroup, it should count events for all children cgroups: parent_group <---- perf_event \ - child_group <---- process(es) However, in our tests, we found this perf_event cannot report reliable results. Here is an example case: # create cgroups mkdir -p /sys/fs/cgroup/p/c # start perf for parent group perf stat -e instructions -G "p" # on another console, run test process in child cgroup: stressapptest -s 2 -M 1000 & echo $! > /sys/fs/cgroup/p/c/cgroup.procs # after the test process is done, stop perf in the first console shows <not counted> instructions p The instruction should not be "not counted" as the process runs in the child cgroup. We found this is because perf_event->cgrp and cpuctx->cgrp are not identical, thus perf_event->cgrp are not updated properly. This patch fixes this by updating perf_cgroup properly for ancestor cgroup(s). Reported-by: Ephraim Park <ephiepark@fb.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <jolsa@redhat.com> Cc: <kernel-team@fb.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/20180312165943.1057894-1-songliubraving@fb.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 9b9322d ] The commit "regulatory: add NUL to request alpha2" increases the length of alpha2 to 3. This causes a regression on brcmfmac, because brcmf_cfg80211_reg_notifier() expect valid ISO3166 codes in the complete array. So fix this accordingly. Fixes: 657308f ("regulatory: add NUL to request alpha2") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 825d487 ] Some filesystems have timestamps with coarse precision that may allow for a recently built object file to have the same timestamp as the updated time on one of its dependency files. When that happens, the object file doesn't get rebuilt as it should. This is especially the case on filesystems that don't have sub-second time precision, such as ext3 or Ext4 with 128B inodes. Let's prevent that by making sure updated dependency files have a newer timestamp than the first file we created (i.e. autoksyms.h.tmpnew). Reported-by: Thomas Lindroth <thomas.lindroth@gmail.com> Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Thomas Lindroth <thomas.lindroth@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 5f3e3b8 ] The option size check is using optval instead of optlen causing the set option call to fail. Use the correct field, optlen, for size check. Fixes: 6a21dfc ("RDMA/ucma: Limit possible option size") Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c3594f2 ] QPs that were configured with ack timeout value lower than 1 msec will not implement re-transmission timeout. This means that if a packet / ACK were dropped, the QP will not retransmit this packet. This can lead to an application hang. Fixes: cecbcdd ("qedr: Add support for QP verbs") Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b15606f ] Return code wasn't set properly when CNQ allocation failed. This only affect error message logging, currently user will receive an error message that says the qedr driver load failed with rc '0', instead of ENOMEM Fixes: ec72fce ("qedr: Add support for RoCE HW init") Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit caf61b1 ] Once the FW is transitioned to error, FLUSH cqes can be received. We want the driver to be aware of the fact that QP is already in error. Without this fix, a user may see false error messages in the dmesg log, mentioning that a FLUSH cqe was received while QP is not in error state. Fixes: cecbcdd ("qedr: Add support for QP verbs") Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit bbc09e7 ] when the following command sequence is entered # tc action add action bpf bytecode '4,40 0 0 12,31 0 1 2048,6 0 0 262144,6 0 0 0' index 100 RTNETLINK answers: Invalid argument We have an error talking to the kernel # tc action add action bpf bytecode '4,40 0 0 12,21 0 1 2048,6 0 0 262144,6 0 0 0' index 100 RTNETLINK answers: No space left on device We have an error talking to the kernel act_bpf correctly refuses to install the first TC rule, because 31 is not a valid instruction. However, it refuses to install the second TC rule, even if the BPF code is correct. Furthermore, it's no more possible to install any other rule having the same value of 'index' until act_bpf module is unloaded/inserted again. After the idr has been reserved, call tcf_idr_release() instead of tcf_idr_cleanup(), to fix this issue. Fixes: 65a206c ("net/sched: Change act_api and act_xxx modules to use IDR") Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 60e10b3 ] if the kernel fails to duplicate 'sdata', creation of a new action fails with -ENOMEM. However, subsequent attempts to install the same action using the same value of 'index' systematically fail with -ENOSPC, and that value of 'index' will no more be usable by act_simple, until rmmod / insmod of act_simple.ko is done: # tc actions add action simple sdata hello index 100 # tc actions list action simple action order 0: Simple <hello> index 100 ref 1 bind 0 # tc actions flush action simple # tc actions add action simple sdata hello index 100 RTNETLINK answers: Cannot allocate memory We have an error talking to the kernel # tc actions flush action simple # tc actions add action simple sdata hello index 100 RTNETLINK answers: No space left on device We have an error talking to the kernel # tc actions add action simple sdata hello index 100 RTNETLINK answers: No space left on device We have an error talking to the kernel ... Fix this in the error path of tcf_simp_init(), calling tcf_idr_release() in place of tcf_idr_cleanup(). Fixes: 65a206c ("net/sched: Change act_api and act_xxx modules to use IDR") Suggested-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 5bf7f81 ] tcf_act_police_init() can fail after the idr has been successfully reserved (e.g., qdisc_get_rtab() may return NULL). When this happens, subsequent attempts to configure a police rule using the same idr value systematiclly fail with -ENOSPC: # tc action add action police rate 1000 burst 1000 drop index 100 RTNETLINK answers: Cannot allocate memory We have an error talking to the kernel # tc action add action police rate 1000 burst 1000 drop index 100 RTNETLINK answers: No space left on device We have an error talking to the kernel # tc action add action police rate 1000 burst 1000 drop index 100 RTNETLINK answers: No space left on device ... Fix this in the error path of tcf_act_police_init(), calling tcf_idr_release() in place of tcf_idr_cleanup(). Fixes: 65a206c ("net/sched: Change act_api and act_xxx modules to use IDR") Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 94fa3f9 ] tcf_pedit_init() can fail to allocate 'keys' after the idr has been successfully reserved. When this happens, subsequent attempts to configure a pedit rule using the same idr value systematically fail with -ENOSPC: # tc action add action pedit munge ip ttl set 63 index 100 RTNETLINK answers: Cannot allocate memory We have an error talking to the kernel # tc action add action pedit munge ip ttl set 63 index 100 RTNETLINK answers: No space left on device We have an error talking to the kernel # tc action add action pedit munge ip ttl set 63 index 100 RTNETLINK answers: No space left on device We have an error talking to the kernel ... Fix this in the error path of tcf_act_pedit_init(), calling tcf_idr_release() in place of tcf_idr_cleanup(). Fixes: 65a206c ("net/sched: Change act_api and act_xxx modules to use IDR") Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 1e46ef1 ] __tcf_ipt_init() can fail after the idr has been successfully reserved. When this happens, subsequent attempts to configure xt/ipt rules using the same idr value systematically fail with -ENOSPC: # tc action add action xt -j LOG --log-prefix test1 index 100 tablename: mangle hook: NF_IP_POST_ROUTING target: LOG level warning prefix "test1" index 100 RTNETLINK answers: Cannot allocate memory We have an error talking to the kernel Command "(null)" is unknown, try "tc actions help". # tc action add action xt -j LOG --log-prefix test1 index 100 tablename: mangle hook: NF_IP_POST_ROUTING target: LOG level warning prefix "test1" index 100 RTNETLINK answers: No space left on device We have an error talking to the kernel Command "(null)" is unknown, try "tc actions help". # tc action add action xt -j LOG --log-prefix test1 index 100 tablename: mangle hook: NF_IP_POST_ROUTING target: LOG level warning prefix "test1" index 100 RTNETLINK answers: No space left on device We have an error talking to the kernel ... Fix this in the error path of __tcf_ipt_init(), calling tcf_idr_release() in place of tcf_idr_cleanup(). Since tcf_ipt_release() can now be called when tcfi_t is NULL, we also need to protect calls to ipt_destroy_target() to avoid NULL pointer dereference. Fixes: 65a206c ("net/sched: Change act_api and act_xxx modules to use IDR") Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f29cdfb ] tcf_skbmod_init() can fail after the idr has been successfully reserved. When this happens, every subsequent attempt to configure skbmod rules using the same idr value will systematically fail with -ENOSPC, unless the first attempt was done using the 'replace' keyword: # tc action add action skbmod swap mac index 100 RTNETLINK answers: Cannot allocate memory We have an error talking to the kernel # tc action add action skbmod swap mac index 100 RTNETLINK answers: No space left on device We have an error talking to the kernel # tc action add action skbmod swap mac index 100 RTNETLINK answers: No space left on device We have an error talking to the kernel ... Fix this in tcf_skbmod_init(), ensuring that tcf_idr_release() is called on the error path when the idr has been reserved, but not yet inserted. Also, don't test 'ovr' in the error path, to avoid a 'replace' failure implicitly become a 'delete' that leaks refcount in act_skbmod module: # rmmod act_skbmod; modprobe act_skbmod # tc action add action skbmod swap mac index 100 # tc action add action skbmod swap mac continue index 100 RTNETLINK answers: File exists We have an error talking to the kernel # tc action replace action skbmod swap mac continue index 100 RTNETLINK answers: Cannot allocate memory We have an error talking to the kernel # tc action list action skbmod # # rmmod act_skbmod rmmod: ERROR: Module act_skbmod is in use Fixes: 65a206c ("net/sched: Change act_api and act_xxx modules to use IDR") Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 40013ff ] We have a functional dependency on the FIXED_PHY MDIO bus because we register fixed PHY devices "the old way" which only works if the code that does this has had a chance to run before the fixed MDIO bus is probed. Make sure we account for that and have dsa_loop_bdinfo.o be either built-in or modular depending on whether CONFIG_FIXED_PHY reflects that too. Fixes: 98cd155 ("net: dsa: Mock-up driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 5a9f698 ] The original ast driver cannot display properly if the resolution is 1280x800 and the pixel clock is 83.5MHz. Here is the update to fix it. Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 8970a63 ] Alexander reported a use of uninitialized memory in __mpol_equal(), which is caused by incorrect use of preferred_node. When mempolicy in mode MPOL_PREFERRED with flags MPOL_F_LOCAL, it uses numa_node_id() instead of preferred_node, however, __mpol_equal() uses preferred_node without checking whether it is MPOL_F_LOCAL or not. [akpm@linux-foundation.org: slight comment tweak] Link: http://lkml.kernel.org/r/4ebee1c2-57f6-bcb8-0e2d-1833d1ee0bb7@huawei.com Fixes: fc36b8d ("mempolicy: use MPOL_F_LOCAL to Indicate Preferred Local Policy") Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Reported-by: Alexander Potapenko <glider@google.com> Tested-by: Alexander Potapenko <glider@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 9d3c335 ] Commit 2516035 ("mm, thp: remove __GFP_NORETRY from khugepaged and madvised allocations") changed the page allocator to no longer detect thp allocations based on __GFP_NORETRY. It did not, however, modify the mem cgroup try_charge() path to avoid oom kill for either khugepaged collapsing or thp faulting. It is never expected to oom kill a process to allocate a hugepage for thp; reclaim is governed by the thp defrag mode and MADV_HUGEPAGE, but allocations (and charging) should fallback instead of oom killing processes. Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1803191409420.124411@chino.kir.corp.google.com Fixes: 2516035 ("mm, thp: remove __GFP_NORETRY from khugepaged and madvised allocations") Signed-off-by: David Rientjes <rientjes@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 9a3fb9f ] A recent commit introduced a new struct xfrm_trans_cb that is used with the sk_buff control buffer. Unfortunately it placed the structure in front of the control buffer and overlooked that the IPv4/IPv6 control buffer is still needed for some layer 4 protocols. As a result the IPv4/IPv6 control buffer is overwritten with this structure. Fix this by setting a apropriate header in front of the structure. Fixes acf568e ("xfrm: Reinject transport-mode packets ...") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 871bef2 ] Add a testcase for probe event argument syntax which ensures the kprobe_events interface correctly parses given event arguments. Link: http://lkml.kernel.org/r/152129033679.31874.12705519603869152799.stgit@devbox Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 2bbea6e ] when mounting an ISO filesystem sometimes (very rarely) the system hangs because of a race condition between two tasks. PID: 6766 TASK: ffff88007b2a6dd0 CPU: 0 COMMAND: "mount" #0 [ffff880078447ae0] __schedule at ffffffff8168d605 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995 #3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef #4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod] #5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50 #6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3 #7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs] #8 [ffff880078447da8] mount_bdev at ffffffff81202570 #9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs] #10 [ffff880078447e28] mount_fs at ffffffff81202d09 #11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f #12 [ffff880078447ea8] do_mount at ffffffff81220fee #13 [ffff880078447f28] sys_mount at ffffffff812218d6 #14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49 RIP: 00007fd9ea914e9a RSP: 00007ffd5d9bf648 RFLAGS: 00010246 RAX: 00000000000000a5 RBX: ffffffff81698c49 RCX: 0000000000000010 RDX: 00007fd9ec2bc210 RSI: 00007fd9ec2bc290 RDI: 00007fd9ec2bcf30 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000010 R10: 00000000c0ed0001 R11: 0000000000000206 R12: 00007fd9ec2bc040 R13: 00007fd9eb6b2380 R14: 00007fd9ec2bc210 R15: 00007fd9ec2bcf30 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b This task was trying to mount the cdrom. It allocated and configured a super_block struct and owned the write-lock for the super_block->s_umount rwsem. While exclusively owning the s_umount lock, it called sr_block_ioctl and waited to acquire the global sr_mutex lock. PID: 6785 TASK: ffff880078720fb0 CPU: 0 COMMAND: "systemd-udevd" #0 [ffff880078417898] __schedule at ffffffff8168d605 #1 [ffff880078417900] schedule at ffffffff8168dc59 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605 #3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838 #4 [ffff8800784179d0] down_read at ffffffff8168cde0 #5 [ffff8800784179e8] get_super at ffffffff81201cc7 #6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de #7 [ffff880078417a40] flush_disk at ffffffff8123a94b #8 [ffff880078417a88] check_disk_change at ffffffff8123ab50 #9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom] #10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod] #11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86 #12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65 #13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b #14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7 #15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf #16 [ffff880078417d00] do_last at ffffffff8120d53d #17 [ffff880078417db0] path_openat at ffffffff8120e6b2 #18 [ffff880078417e48] do_filp_open at ffffffff8121082b frank-w#19 [ffff880078417f18] do_sys_open at ffffffff811fdd33 frank-w#20 [ffff880078417f70] sys_open at ffffffff811fde4e frank-w#21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49 RIP: 00007f29438b0c20 RSP: 00007ffc76624b78 RFLAGS: 00010246 RAX: 0000000000000002 RBX: ffffffff81698c49 RCX: 0000000000000000 RDX: 00007f2944a5fa70 RSI: 00000000000a0800 RDI: 00007f2944a5fa70 RBP: 00007f2944a5f540 R8: 0000000000000000 R9: 0000000000000020 R10: 00007f2943614c40 R11: 0000000000000246 R12: ffffffff811fde4e R13: ffff880078417f78 R14: 000000000000000c R15: 00007f2944a4b010 ORIG_RAX: 0000000000000002 CS: 0033 SS: 002b This task tried to open the cdrom device, the sr_block_open function acquired the global sr_mutex lock. The call to check_disk_change() then saw an event flag indicating a possible media change and tried to flush any cached data for the device. As part of the flush, it tried to acquire the super_block->s_umount lock associated with the cdrom device. This was the same super_block as created and locked by the previous task. The first task acquires the s_umount lock and then the sr_mutex_lock; the second task acquires the sr_mutex_lock and then the s_umount lock. This patch fixes the issue by moving check_disk_change() out of cdrom_open() and let the caller take care of it. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d546b67 ] spin_lock/unlock was used instead of spin_un/lock_irq in a procedure used in process space, on a spinlock which can be grabbed in an interrupt. This caused the stack trace below to be displayed (on kernel 4.17.0-rc1 compiled with Lock Debugging enabled): [ 154.661474] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected [ 154.668909] 4.17.0-rc1-rdma_rc_mlx+ #3 Tainted: G I [ 154.675856] ----------------------------------------------------- [ 154.682706] modprobe/10159 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 154.690254] 00000000f3b0e495 (&(&qp_table->lock)->rlock){+.+.}, at: mlx4_qp_remove+0x20/0x50 [mlx4_core] [ 154.700927] and this task is already holding: [ 154.707461] 0000000094373b5d (&(&cq->lock)->rlock/1){....}, at: destroy_qp_common+0x111/0x560 [mlx4_ib] [ 154.718028] which would create a new lock dependency: [ 154.723705] (&(&cq->lock)->rlock/1){....} -> (&(&qp_table->lock)->rlock){+.+.} [ 154.731922] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 154.740798] (&(&cq->lock)->rlock){..-.} [ 154.740800] ... which became SOFTIRQ-irq-safe at: [ 154.752163] _raw_spin_lock_irqsave+0x3e/0x50 [ 154.757163] mlx4_ib_poll_cq+0x36/0x900 [mlx4_ib] [ 154.762554] ipoib_tx_poll+0x4a/0xf0 [ib_ipoib] ... to a SOFTIRQ-irq-unsafe lock: [ 154.815603] (&(&qp_table->lock)->rlock){+.+.} [ 154.815604] ... which became SOFTIRQ-irq-unsafe at: [ 154.827718] ... [ 154.827720] _raw_spin_lock+0x35/0x50 [ 154.833912] mlx4_qp_lookup+0x1e/0x50 [mlx4_core] [ 154.839302] mlx4_flow_attach+0x3f/0x3d0 [mlx4_core] Since mlx4_qp_lookup() is called only in process space, we can simply replace the spin_un/lock calls with spin_un/lock_irq calls. Fixes: 6dc06c0 ("net/mlx4: Fix the check in attaching steering rules") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As virtual_context_destroy() may be called from a request signal, it may be called from inside an irq-off section, and so we need to do a full save/restore of the irq state rather than blindly re-enable irqs upon unlocking. <4> [110.024262] WARNING: inconsistent lock state <4> [110.024277] 5.4.0-rc8-CI-CI_DRM_7489+ #1 Tainted: G U <4> [110.024292] -------------------------------- <4> [110.024305] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. <4> [110.024323] kworker/0:0/5 [HC0[0]:SC0[0]:HE1:SE1] takes: <4> [110.024338] ffff88826a0c7a18 (&(&rq->lock)->rlock){?.-.}, at: i915_request_retire+0x221/0x930 [i915] <4> [110.024592] {IN-HARDIRQ-W} state was registered at: <4> [110.024612] lock_acquire+0xa7/0x1c0 <4> [110.024627] _raw_spin_lock_irqsave+0x33/0x50 <4> [110.024788] intel_engine_breadcrumbs_irq+0x38c/0x600 [i915] <4> [110.024808] irq_work_run_list+0x49/0x70 <4> [110.024824] irq_work_run+0x26/0x50 <4> [110.024839] smp_irq_work_interrupt+0x44/0x1e0 <4> [110.024855] irq_work_interrupt+0xf/0x20 <4> [110.024871] __do_softirq+0xb7/0x47f <4> [110.024885] irq_exit+0xba/0xc0 <4> [110.024898] do_IRQ+0x83/0x160 <4> [110.024910] ret_from_intr+0x0/0x1d <4> [110.024922] irq event stamp: 172864 <4> [110.024938] hardirqs last enabled at (172863): [<ffffffff819ea214>] _raw_spin_unlock_irq+0x24/0x50 <4> [110.024963] hardirqs last disabled at (172864): [<ffffffff819e9fba>] _raw_spin_lock_irq+0xa/0x40 <4> [110.024988] softirqs last enabled at (172812): [<ffffffff81c00385>] __do_softirq+0x385/0x47f <4> [110.025012] softirqs last disabled at (172797): [<ffffffff810b829a>] irq_exit+0xba/0xc0 <4> [110.025031] other info that might help us debug this: <4> [110.025049] Possible unsafe locking scenario: <4> [110.025065] CPU0 <4> [110.025075] ---- <4> [110.025084] lock(&(&rq->lock)->rlock); <4> [110.025099] <Interrupt> <4> [110.025109] lock(&(&rq->lock)->rlock); <4> [110.025124] *** DEADLOCK *** <4> [110.025144] 4 locks held by kworker/0:0/5: <4> [110.025156] #0: ffff88827588f528 ((wq_completion)events){+.+.}, at: process_one_work+0x1de/0x620 <4> [110.025187] #1: ffffc9000006fe78 ((work_completion)(&engine->retire_work)){+.+.}, at: process_one_work+0x1de/0x620 <4> [110.025219] #2: ffff88825605e270 (&kernel#2){+.+.}, at: engine_retire+0x57/0xe0 [i915] <4> [110.025405] #3: ffff88826a0c7a18 (&(&rq->lock)->rlock){?.-.}, at: i915_request_retire+0x221/0x930 [i915] <4> [110.025634] stack backtrace: <4> [110.025653] CPU: 0 PID: 5 Comm: kworker/0:0 Tainted: G U 5.4.0-rc8-CI-CI_DRM_7489+ #1 <4> [110.025675] Hardware name: /NUC7i5BNB, BIOS BNKBL357.86A.0054.2017.1025.1822 10/25/2017 <4> [110.025856] Workqueue: events engine_retire [i915] <4> [110.025872] Call Trace: <4> [110.025891] dump_stack+0x71/0x9b <4> [110.025907] mark_lock+0x49a/0x500 <4> [110.025926] ? print_shortest_lock_dependencies+0x200/0x200 <4> [110.025946] mark_held_locks+0x49/0x70 <4> [110.025962] ? _raw_spin_unlock_irq+0x24/0x50 <4> [110.025978] lockdep_hardirqs_on+0xa2/0x1c0 <4> [110.025995] _raw_spin_unlock_irq+0x24/0x50 <4> [110.026171] virtual_context_destroy+0xc5/0x2e0 [i915] <4> [110.026376] __active_retire+0xb4/0x290 [i915] <4> [110.026396] dma_fence_signal_locked+0x9e/0x1b0 <4> [110.026613] i915_request_retire+0x451/0x930 [i915] <4> [110.026766] retire_requests+0x4d/0x60 [i915] <4> [110.026919] engine_retire+0x63/0xe0 [i915] Fixes: b1e3177 ("drm/i915: Coordinate i915_active with its own mutex") Fixes: 6d06779 ("drm/i915: Load balancing across a virtual engine") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191205145934.663183-1-chris@chris-wilson.co.uk (cherry picked from commit 6f7ac82) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

The current rbtree for service ranges in the name table is built based on the 'lower' & 'upper' range values resulting in a flaw in the rbtree searching. Some issues have been observed in case of range overlapping: Case #1: unable to withdraw a name entry: After some name services are bound, all of them are withdrawn by user but one remains in the name table forever. This corrupts the table and that service becomes dummy i.e. no real port. E.g. / {22, 22} / / ---> {10, 50} / \ / \ {10, 30} {20, 60} The node {10, 30} cannot be removed since the rbtree searching stops at the node's ancestor i.e. {10, 50}, so starting from it will never reach the finding node. Case #2: failed to send data in some cases: E.g. Two service ranges: {20, 60}, {10, 50} are bound. The rbtree for this service will be one of the two cases below depending on the order of the bindings: {20, 60} {10, 50} <-- / \ / \ / \ / \ {10, 50} NIL <-- NIL {20, 60} (a) (b) Now, try to send some data to service {30}, there will be two results: (a): Failed, no route to host. (b): Ok. The reason is that the rbtree searching will stop at the pointing node as shown above. Case #3: Same as case #2b above but if the data sending's scope is local and the {10, 50} is published by a peer node, then it will result in 'no route to host' even though the other {20, 60} is for example on the local node which should be able to get the data. The issues are actually due to the way we built the rbtree. This commit fixes it by introducing an additional field to each node - named 'max', which is the largest 'upper' of that node subtree. The 'max' value for each subtrees will be propagated correctly whenever a node is inserted/ removed or the tree is rebalanced by the augmented rbtree callbacks. By this way, we can change the rbtree searching appoarch to solve the issues above. Another benefit from this is that we can now improve the searching for a next range matching e.g. in case of multicast, so get rid of the unneeded looping over all nodes in the tree. Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>

We got another syzbot report [1] that tells us we must use write_lock_irq()/write_unlock_irq() to avoid possible deadlock. [1] WARNING: inconsistent lock state 5.5.0-rc1-syzkaller #0 Not tainted -------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-R} usage. syz-executor826/9605 [HC1[1]:SC0[0]:HE0:SE1] takes: ffffffff8a128718 (disc_data_lock){+-..}, at: sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138 {HARDIRQ-ON-W} state was registered at: lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485 __raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline] _raw_write_lock_bh+0x33/0x50 kernel/locking/spinlock.c:319 sixpack_close+0x1d/0x250 drivers/net/hamradio/6pack.c:657 tty_ldisc_close.isra.0+0x119/0x1a0 drivers/tty/tty_ldisc.c:489 tty_set_ldisc+0x230/0x6b0 drivers/tty/tty_ldisc.c:585 tiocsetd drivers/tty/tty_io.c:2337 [inline] tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2597 vfs_ioctl fs/ioctl.c:47 [inline] file_ioctl fs/ioctl.c:545 [inline] do_vfs_ioctl+0x977/0x14e0 fs/ioctl.c:732 ksys_ioctl+0xab/0xd0 fs/ioctl.c:749 __do_sys_ioctl fs/ioctl.c:756 [inline] __se_sys_ioctl fs/ioctl.c:754 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:754 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe irq event stamp: 3946 hardirqs last enabled at (3945): [<ffffffff87c86e43>] __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:168 [inline] hardirqs last enabled at (3945): [<ffffffff87c86e43>] _raw_spin_unlock_irq+0x23/0x80 kernel/locking/spinlock.c:199 hardirqs last disabled at (3946): [<ffffffff8100675f>] trace_hardirqs_off_thunk+0x1a/0x1c arch/x86/entry/thunk_64.S:42 softirqs last enabled at (2658): [<ffffffff86a8b4df>] spin_unlock_bh include/linux/spinlock.h:383 [inline] softirqs last enabled at (2658): [<ffffffff86a8b4df>] clusterip_netdev_event+0x46f/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:222 softirqs last disabled at (2656): [<ffffffff86a8b22b>] spin_lock_bh include/linux/spinlock.h:343 [inline] softirqs last disabled at (2656): [<ffffffff86a8b22b>] clusterip_netdev_event+0x1bb/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:196 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(disc_data_lock); <Interrupt> lock(disc_data_lock); *** DEADLOCK *** 5 locks held by syz-executor826/9605: #0: ffff8880a905e198 (&tty->legacy_mutex){+.+.}, at: tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19 #1: ffffffff899a56c0 (rcu_read_lock){....}, at: mutex_spin_on_owner+0x0/0x330 kernel/locking/mutex.c:413 #2: ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: spin_lock include/linux/spinlock.h:338 [inline] #2: ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: serial8250_interrupt+0x2d/0x1a0 drivers/tty/serial/8250/8250_core.c:116 #3: ffffffff8c104048 (&port_lock_key){-.-.}, at: serial8250_handle_irq.part.0+0x24/0x330 drivers/tty/serial/8250/8250_port.c:1823 #4: ffff8880a905e090 (&tty->ldisc_sem){++++}, at: tty_ldisc_ref+0x22/0x90 drivers/tty/tty_ldisc.c:288 stack backtrace: CPU: 1 PID: 9605 Comm: syz-executor826 Not tainted 5.5.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_usage_bug.cold+0x327/0x378 kernel/locking/lockdep.c:3101 valid_state kernel/locking/lockdep.c:3112 [inline] mark_lock_irq kernel/locking/lockdep.c:3309 [inline] mark_lock+0xbb4/0x1220 kernel/locking/lockdep.c:3666 mark_usage kernel/locking/lockdep.c:3554 [inline] __lock_acquire+0x1e55/0x4a00 kernel/locking/lockdep.c:3909 lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485 __raw_read_lock include/linux/rwlock_api_smp.h:149 [inline] _raw_read_lock+0x32/0x50 kernel/locking/spinlock.c:223 sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138 sixpack_write_wakeup+0x25/0x340 drivers/net/hamradio/6pack.c:402 tty_wakeup+0xe9/0x120 drivers/tty/tty_io.c:536 tty_port_default_wakeup+0x2b/0x40 drivers/tty/tty_port.c:50 tty_port_tty_wakeup+0x57/0x70 drivers/tty/tty_port.c:387 uart_write_wakeup+0x46/0x70 drivers/tty/serial/serial_core.c:104 serial8250_tx_chars+0x495/0xaf0 drivers/tty/serial/8250/8250_port.c:1761 serial8250_handle_irq.part.0+0x2a2/0x330 drivers/tty/serial/8250/8250_port.c:1834 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1820 [inline] serial8250_default_handle_irq+0xc0/0x150 drivers/tty/serial/8250/8250_port.c:1850 serial8250_interrupt+0xf1/0x1a0 drivers/tty/serial/8250/8250_core.c:126 __handle_irq_event_percpu+0x15d/0x970 kernel/irq/handle.c:149 handle_irq_event_percpu+0x74/0x160 kernel/irq/handle.c:189 handle_irq_event+0xa7/0x134 kernel/irq/handle.c:206 handle_edge_irq+0x25e/0x8d0 kernel/irq/chip.c:830 generic_handle_irq_desc include/linux/irqdesc.h:156 [inline] do_IRQ+0xde/0x280 arch/x86/kernel/irq.c:250 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:607 </IRQ> RIP: 0010:cpu_relax arch/x86/include/asm/processor.h:685 [inline] RIP: 0010:mutex_spin_on_owner+0x247/0x330 kernel/locking/mutex.c:579 Code: c3 be 08 00 00 00 4c 89 e7 e8 e5 06 59 00 4c 89 e0 48 c1 e8 03 42 80 3c 38 00 0f 85 e1 00 00 00 49 8b 04 24 a8 01 75 96 f3 90 <e9> 2f fe ff ff 0f 0b e8 0d 19 09 00 84 c0 0f 85 ff fd ff ff 48 c7 RSP: 0018:ffffc90001eafa20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffd7 RAX: 0000000000000000 RBX: ffff88809fd9e0c0 RCX: 1ffffffff13266dd RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000000 RBP: ffffc90001eafa60 R08: 1ffff11013d22898 R09: ffffed1013d22899 R10: ffffed1013d22898 R11: ffff88809e9144c7 R12: ffff8880a905e138 R13: ffff88809e9144c0 R14: 0000000000000000 R15: dffffc0000000000 mutex_optimistic_spin kernel/locking/mutex.c:673 [inline] __mutex_lock_common kernel/locking/mutex.c:962 [inline] __mutex_lock+0x32b/0x13c0 kernel/locking/mutex.c:1106 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1121 tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19 tty_release+0xb5/0xe90 drivers/tty/tty_io.c:1665 __fput+0x2ff/0x890 fs/file_table.c:280 ____fput+0x16/0x20 fs/file_table.c:313 task_work_run+0x145/0x1c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x8e7/0x2ef0 kernel/exit.c:797 do_group_exit+0x135/0x360 kernel/exit.c:895 __do_sys_exit_group kernel/exit.c:906 [inline] __se_sys_exit_group kernel/exit.c:904 [inline] __x64_sys_exit_group+0x44/0x50 kernel/exit.c:904 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x43fef8 Code: Bad RIP value. RSP: 002b:00007ffdb07d2338 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000000000043fef8 RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 RBP: 00000000004bf730 R08: 00000000000000e7 R09: ffffffffffffffd0 R10: 00000000004002c8 R11: 0000000000000246 R12: 0000000000000001 R13: 00000000006d1180 R14: 0000000000000000 R15: 0000000000000000 Fixes: 6e4e2f8 ("6pack,mkiss: fix lock inconsistency") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>

When closing and freeing the source device we could end up doing our final blkdev_put() on the bdev, which will grab the bd_mutex. As such we want to be holding as few locks as possible, so move this call outside of the dev_replace->lock_finishing_cancel_unmount lock. Since we're modifying the fs_devices we need to make sure we're holding the uuid_mutex here, so take that as well. There's a report from syzbot probably hitting one of the cases where the bd_mutex and device_list_mutex are taken in the wrong order, however it's not with device replace, like this patch fixes. As there's no reproducer available so far, we can't verify the fix. https://lore.kernel.org/lkml/000000000000fc04d105afcf86d7@google.com/ dashboard link: https://syzkaller.appspot.com/bug?extid=84a0634dc5d21d488419 WARNING: possible circular locking dependency detected 5.9.0-rc5-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor.0/6878 is trying to acquire lock: ffff88804c17d780 (&bdev->bd_mutex){+.+.}-{3:3}, at: blkdev_put+0x30/0x520 fs/block_dev.c:1804 but task is already holding lock: ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 btrfs_finish_chunk_alloc+0x281/0xf90 fs/btrfs/volumes.c:5255 btrfs_create_pending_block_groups+0x2f3/0x700 fs/btrfs/block-group.c:2109 __btrfs_end_transaction+0xf5/0x690 fs/btrfs/transaction.c:916 find_free_extent_update_loop fs/btrfs/extent-tree.c:3807 [inline] find_free_extent+0x23b7/0x2e60 fs/btrfs/extent-tree.c:4127 btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206 cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063 btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838 writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439 __extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653 extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249 extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370 do_writepages+0xec/0x290 mm/page-writeback.c:2352 __writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461 writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721 wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894 wb_do_writeback fs/fs-writeback.c:2039 [inline] wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 -> #3 (sb_internal#2){.+.+}-{0:0}: percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write+0x234/0x470 fs/super.c:1672 sb_start_intwrite include/linux/fs.h:1690 [inline] start_transaction+0xbe7/0x1170 fs/btrfs/transaction.c:624 find_free_extent_update_loop fs/btrfs/extent-tree.c:3789 [inline] find_free_extent+0x25e1/0x2e60 fs/btrfs/extent-tree.c:4127 btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206 cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063 btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838 writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439 __extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653 extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249 extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370 do_writepages+0xec/0x290 mm/page-writeback.c:2352 __writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461 writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721 wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894 wb_do_writeback fs/fs-writeback.c:2039 [inline] wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 -> #2 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}: __flush_work+0x60e/0xac0 kernel/workqueue.c:3041 wb_shutdown+0x180/0x220 mm/backing-dev.c:355 bdi_unregister+0x174/0x590 mm/backing-dev.c:872 del_gendisk+0x820/0xa10 block/genhd.c:933 loop_remove drivers/block/loop.c:2192 [inline] loop_control_ioctl drivers/block/loop.c:2291 [inline] loop_control_ioctl+0x3b1/0x480 drivers/block/loop.c:2257 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (loop_ctl_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 lo_open+0x19/0xd0 drivers/block/loop.c:1893 __blkdev_get+0x759/0x1aa0 fs/block_dev.c:1507 blkdev_get fs/block_dev.c:1639 [inline] blkdev_open+0x227/0x300 fs/block_dev.c:1753 do_dentry_open+0x4b9/0x11b0 fs/open.c:817 do_open fs/namei.c:3251 [inline] path_openat+0x1b9a/0x2730 fs/namei.c:3368 do_filp_open+0x17e/0x3c0 fs/namei.c:3395 do_sys_openat2+0x16d/0x420 fs/open.c:1168 do_sys_open fs/open.c:1184 [inline] __do_sys_open fs/open.c:1192 [inline] __se_sys_open fs/open.c:1188 [inline] __x64_sys_open+0x119/0x1c0 fs/open.c:1188 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&bdev->bd_mutex){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426 lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006 __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 blkdev_put+0x30/0x520 fs/block_dev.c:1804 btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline] btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline] btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline] close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161 close_fs_devices fs/btrfs/volumes.c:1193 [inline] btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179 close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149 generic_shutdown_super+0x144/0x370 fs/super.c:464 kill_anon_super+0x36/0x60 fs/super.c:1108 btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265 deactivate_locked_super+0x94/0x160 fs/super.c:335 deactivate_super+0xad/0xd0 fs/super.c:366 cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:163 [inline] exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: &bdev->bd_mutex --> sb_internal#2 --> &fs_devs->device_list_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_devs->device_list_mutex); lock(sb_internal#2); lock(&fs_devs->device_list_mutex); lock(&bdev->bd_mutex); *** DEADLOCK *** 3 locks held by syz-executor.0/6878: #0: ffff88809070c0e0 (&type->s_umount_key#70){++++}-{3:3}, at: deactivate_super+0xa5/0xd0 fs/super.c:365 #1: ffffffff8a5b37a8 (uuid_mutex){+.+.}-{3:3}, at: btrfs_close_devices+0x23/0x1f0 fs/btrfs/volumes.c:1178 #2: ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159 stack backtrace: CPU: 0 PID: 6878 Comm: syz-executor.0 Not tainted 5.9.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 check_noncircular+0x324/0x3e0 kernel/locking/lockdep.c:1827 check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426 lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006 __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 blkdev_put+0x30/0x520 fs/block_dev.c:1804 btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline] btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline] btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline] close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161 close_fs_devices fs/btrfs/volumes.c:1193 [inline] btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179 close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149 generic_shutdown_super+0x144/0x370 fs/super.c:464 kill_anon_super+0x36/0x60 fs/super.c:1108 btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265 deactivate_locked_super+0x94/0x160 fs/super.c:335 deactivate_super+0xad/0xd0 fs/super.c:366 cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:163 [inline] exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x460027 RSP: 002b:00007fff59216328 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 0000000000076035 RCX: 0000000000460027 RDX: 0000000000403188 RSI: 0000000000000002 RDI: 00007fff592163d0 RBP: 0000000000000333 R08: 0000000000000000 R09: 000000000000000b R10: 0000000000000005 R11: 0000000000000246 R12: 00007fff59217460 R13: 0000000002df2a60 R14: 0000000000000000 R15: 00007fff59217460 Signed-off-by: Josef Bacik <josef@toxicpanda.com> [ add syzbot reference ] Signed-off-by: David Sterba <dsterba@suse.com>

…kernel/git/kvmarm/kvmarm into kvm-master KVM/arm64 fixes for 5.9, take #3 - Fix synchronization of VTTBR update on TLB invalidation for nVHE systems

When running the latest kernel on an sc7180 with KASAN I got this splat: BUG: KASAN: slab-out-of-bounds in a6xx_gpu_init+0x618/0x644 Read of size 4 at addr ffffff8088f36100 by task kworker/7:1/58 CPU: 7 PID: 58 Comm: kworker/7:1 Not tainted 5.11.0+ #3 Hardware name: Google Lazor (rev1 - 2) with LTE (DT) Workqueue: events deferred_probe_work_func Call trace: dump_backtrace+0x0/0x3a8 show_stack+0x24/0x30 dump_stack+0x174/0x1e0 print_address_description+0x70/0x2e4 kasan_report+0x178/0x1bc __asan_report_load4_noabort+0x44/0x50 a6xx_gpu_init+0x618/0x644 adreno_bind+0x26c/0x438 This is because the speed bin is defined like this: gpu_speed_bin: gpu_speed_bin@1d2 { reg = <0x1d2 0x2>; bits = <5 8>; }; As you can see the "length" is 2 bytes. That means that the nvmem subsystem allocates only 2 bytes. The GPU code, however, was casting the pointer allocated by nvmem to a (u32 *) and dereferencing. That's not so good. Let's fix this to just use the nvmem_cell_read_u16() accessor function which simplifies things and also gets rid of the splat. Let's also put an explicit conversion from little endian in place just to make things clear. The nvmem subsystem today is assuming little endian and this makes it clear. Specifically, the way the above sc7180 cell is interpreted: NVMEM: +--------+--------+--------+--------+--------+ | ...... | 0x1d3 | 0x1d2 | ...... | 0x000 | +--------+--------+--------+--------+--------+ ^ ^ msb lsb You can see that the least significant data is at the lower address which is little endian. NOTE: someone who is truly paying attention might wonder about me picking the "u16" version of this accessor instead of the "u8" (since the value is 8 bits big) or the u32 version (just for fun). At the moment you need to pick the accessor that exactly matches the length the cell was specified as in the device tree. Hopefully future patches to the nvmem subsystem will fix this. Fixes: fe7952c ("drm/msm: Add speed-bin support to a618 gpu") Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>

I got several memory leak reports from Asan with a simple command. It was because VDSO is not released due to the refcount. Like in __dsos_addnew_id(), it should put the refcount after adding to the list. $ perf record true [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ] ================================================================= ==692599==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce4aa8ee in dso__new_id util/dso.c:1256 #2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132 #3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347 #4 0x559bce50826c in map__new util/map.c:175 #5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #6 0x559bce512f6b in machines__deliver_event util/session.c:1481 #7 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #8 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #10 0x559bce519bea in __perf_session__process_events util/session.c:2268 #11 0x559bce519bea in perf_session__process_events util/session.c:2297 #12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 frank-w#19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 frank-w#20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 Indirect leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce520907 in nsinfo__copy util/namespaces.c:169 #2 0x559bce50821b in map__new util/map.c:168 #3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #4 0x559bce512f6b in machines__deliver_event util/session.c:1481 #5 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #6 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #8 0x559bce519bea in __perf_session__process_events util/session.c:2268 #9 0x559bce519bea in perf_session__process_events util/session.c:2297 #10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210315045641.700430-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Patch fixes the bug: BUG: kernel NULL pointer dereference, address: 0000000000000050 PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 0 PID: 4137 Comm: uvc-gadget Tainted: G OE 5.10.0-next-20201214+ #3 Hardware name: ASUS All Series/Q87T, BIOS 0908 07/22/2014 RIP: 0010:cdnsp_remove_request+0xe9/0x530 [cdnsp_udc_pci] Code: 01 00 00 31 f6 48 89 df e8 64 d4 ff ff 48 8b 43 08 48 8b 13 45 31 f6 48 89 42 08 48 89 10 b8 98 ff ff ff 48 89 1b 48 89 5b 08 <41> 83 6d 50 01 41 83 af d0 00 00 00 01 41 f6 84 24 78 20 00 00 08 RSP: 0018:ffffb68d00d07b60 EFLAGS: 00010046 RAX: 00000000ffffff98 RBX: ffff9d29c57fbf00 RCX: 0000000000001400 RDX: ffff9d29c57fbf00 RSI: 0000000000000000 RDI: ffff9d29c57fbf00 RBP: ffffb68d00d07bb0 R08: ffff9d2ad9510a00 R09: ffff9d2ac011c000 R10: ffff9d2a12b6e760 R11: 0000000000000000 R12: ffff9d29d3fb8000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff9d29d3fb88c0 FS: 0000000000000000(0000) GS:ffff9d2adba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000050 CR3: 0000000102164005 CR4: 00000000001706f0 Call Trace: cdnsp_ep_dequeue+0x3c/0x90 [cdnsp_udc_pci] cdnsp_gadget_ep_dequeue+0x3f/0x80 [cdnsp_udc_pci] usb_ep_dequeue+0x21/0x70 [udc_core] uvcg_video_enable+0x19d/0x220 [usb_f_uvc] uvc_v4l2_release+0x49/0x90 [usb_f_uvc] v4l2_release+0xa5/0x100 [videodev] __fput+0x99/0x250 ____fput+0xe/0x10 task_work_run+0x75/0xb0 do_exit+0x370/0xb80 do_group_exit+0x43/0xa0 get_signal+0x12d/0x820 arch_do_signal_or_restart+0xb2/0x870 ? __switch_to_asm+0x36/0x70 ? kern_select+0xc6/0x100 exit_to_user_mode_prepare+0xfc/0x170 syscall_exit_to_user_mode+0x2a/0x40 do_syscall_64+0x43/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fe969cf5dd7 Code: Unable to access opcode bytes at RIP 0x7fe969cf5dad. Problem occurs for UVC class. During disconnecting the UVC class disable endpoints and then start dequeuing all requests. This leads to situation where requests are removed twice. The first one in cdnsp_gadget_ep_disable and the second in cdnsp_gadget_ep_dequeue function. Patch adds condition in cdnsp_gadget_ep_dequeue function which allows dequeue requests only from enabled endpoint. Fixes: 3d82904 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.12, take #3 - Fix GICv3 MMIO compatibility probing - Prevent guests from using the ARMv8.4 self-hosted tracing extension

The following deadlock is detected: truncate -> setattr path is waiting for pending direct IO to be done (inode->i_dio_count become zero) with inode->i_rwsem held (down_write). PID: 14827 TASK: ffff881686a9af80 CPU: 20 COMMAND: "ora_p005_hrltd9" #0 __schedule at ffffffff818667cc #1 schedule at ffffffff81866de6 #2 inode_dio_wait at ffffffff812a2d04 #3 ocfs2_setattr at ffffffffc05f322e [ocfs2] #4 notify_change at ffffffff812a5a09 #5 do_truncate at ffffffff812808f5 #6 do_sys_ftruncate.constprop.18 at ffffffff81280cf2 #7 sys_ftruncate at ffffffff81280d8e #8 do_syscall_64 at ffffffff81003949 #9 entry_SYSCALL_64_after_hwframe at ffffffff81a001ad dio completion path is going to complete one direct IO (decrement inode->i_dio_count), but before that it hung at locking inode->i_rwsem: #0 __schedule+700 at ffffffff818667cc #1 schedule+54 at ffffffff81866de6 #2 rwsem_down_write_failed+536 at ffffffff8186aa28 #3 call_rwsem_down_write_failed+23 at ffffffff8185a1b7 #4 down_write+45 at ffffffff81869c9d #5 ocfs2_dio_end_io_write+180 at ffffffffc05d5444 [ocfs2] #6 ocfs2_dio_end_io+85 at ffffffffc05d5a85 [ocfs2] #7 dio_complete+140 at ffffffff812c873c #8 dio_aio_complete_work+25 at ffffffff812c89f9 #9 process_one_work+361 at ffffffff810b1889 #10 worker_thread+77 at ffffffff810b233d #11 kthread+261 at ffffffff810b7fd5 #12 ret_from_fork+62 at ffffffff81a0035e Thus above forms ABBA deadlock. The same deadlock was mentioned in upstream commit 28f5a8a ("ocfs2: should wait dio before inode lock in ocfs2_setattr()"). It seems that that commit only removed the cluster lock (the victim of above dead lock) from the ABBA deadlock party. End-user visible effects: Process hang in truncate -> ocfs2_setattr path and other processes hang at ocfs2_dio_end_io_write path. This is to fix the deadlock itself. It removes inode_lock() call from dio completion path to remove the deadlock and add ip_alloc_sem lock in setattr path to synchronize the inode modifications. [wen.gang.wang@oracle.com: remove the "had_alloc_lock" as suggested] Link: https://lkml.kernel.org/r/20210402171344.1605-1-wen.gang.wang@oracle.com Link: https://lkml.kernel.org/r/20210331203654.3911-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

commit 0af7782 upstream. The execution of fb_delete_videomode() is not based on the result of the previous fbcon_mode_deleted(). As a result, the mode is directly deleted, regardless of whether it is still in use, which may cause UAF. ================================================================== BUG: KASAN: use-after-free in fb_mode_is_equal+0x36e/0x5e0 \ drivers/video/fbdev/core/modedb.c:924 Read of size 4 at addr ffff88807e0ddb1c by task syz-executor.0/18962 CPU: 2 PID: 18962 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ... Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x137/0x1be lib/dump_stack.c:118 print_address_description+0x6c/0x640 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report+0x13d/0x1e0 mm/kasan/report.c:562 fb_mode_is_equal+0x36e/0x5e0 drivers/video/fbdev/core/modedb.c:924 fbcon_mode_deleted+0x16a/0x220 drivers/video/fbdev/core/fbcon.c:2746 fb_set_var+0x1e1/0xdb0 drivers/video/fbdev/core/fbmem.c:975 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 18960: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x3d/0x70 mm/kasan/common.c:56 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0x108/0x140 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1541 [inline] slab_free_freelist_hook+0xd6/0x1a0 mm/slub.c:1574 slab_free mm/slub.c:3139 [inline] kfree+0xca/0x3d0 mm/slub.c:4121 fb_delete_videomode+0x56a/0x820 drivers/video/fbdev/core/modedb.c:1104 fb_set_var+0x1f3/0xdb0 drivers/video/fbdev/core/fbmem.c:978 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 13ff178 ("fbcon: Call fbcon_mode_deleted/new_modelist directly") Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Cc: <stable@vger.kernel.org> # v5.3+ Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210712085544.2828-1-thunder.leizhen@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4385539 upstream. The ordering of MSI-X enable in hardware is dysfunctional: 1) MSI-X is disabled in the control register 2) Various setup functions 3) pci_msi_setup_msi_irqs() is invoked which ends up accessing the MSI-X table entries 4) MSI-X is enabled and masked in the control register with the comment that enabling is required for some hardware to access the MSI-X table Step #4 obviously contradicts #3. The history of this is an issue with the NIU hardware. When #4 was introduced the table access actually happened in msix_program_entries() which was invoked after enabling and masking MSI-X. This was changed in commit d71d643 ("PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X interrupts") which removed the table write from msix_program_entries(). Interestingly enough nobody noticed and either NIU still works or it did not get any testing with a kernel 3.19 or later. Nevertheless this is inconsistent and there is no reason why MSI-X can't be enabled and masked in the control register early on, i.e. move step #4 above to step #1. This preserves the NIU workaround and has no side effects on other hardware. Fixes: d71d643 ("PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X interrupts") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.344136412@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 67069a1 upstream. ASan reported a memory leak caused by info_linear not being deallocated. The info_linear was allocated during in perf_event__synthesize_one_bpf_prog(). This patch adds the corresponding free() when bpf_prog_info_node is freed in perf_env__purge_bpf(). $ sudo ./perf record -- sleep 5 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ] ================================================================= ==297735==ERROR: LeakSanitizer: detected memory leaks Direct leak of 7688 byte(s) in 19 object(s) allocated from: #0 0x4f420f in malloc (/home/user/linux/tools/perf/perf+0x4f420f) #1 0xc06a74 in bpf_program__get_prog_info_linear /home/user/linux/tools/lib/bpf/libbpf.c:11113:16 #2 0xb426fe in perf_event__synthesize_one_bpf_prog /home/user/linux/tools/perf/util/bpf-event.c:191:16 #3 0xb42008 in perf_event__synthesize_bpf_events /home/user/linux/tools/perf/util/bpf-event.c:410:9 #4 0x594596 in record__synthesize /home/user/linux/tools/perf/builtin-record.c:1490:8 #5 0x58c9ac in __cmd_record /home/user/linux/tools/perf/builtin-record.c:1798:8 #6 0x58990b in cmd_record /home/user/linux/tools/perf/builtin-record.c:2901:8 #7 0x7b2a20 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #8 0x7b12ff in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #9 0x7b2583 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #10 0x7b0d79 in main /home/user/linux/tools/perf/perf.c:539:3 #11 0x7fa357ef6b74 in __libc_start_main /usr/src/debug/glibc-2.33-8.fc34.x86_64/csu/../csu/libc-start.c:332:16 Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Link: http://lore.kernel.org/lkml/20210602224024.300485-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 41d5854 upstream. I got several memory leak reports from Asan with a simple command. It was because VDSO is not released due to the refcount. Like in __dsos_addnew_id(), it should put the refcount after adding to the list. $ perf record true [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ] ================================================================= ==692599==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce4aa8ee in dso__new_id util/dso.c:1256 #2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132 #3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347 #4 0x559bce50826c in map__new util/map.c:175 #5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #6 0x559bce512f6b in machines__deliver_event util/session.c:1481 #7 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #8 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #10 0x559bce519bea in __perf_session__process_events util/session.c:2268 #11 0x559bce519bea in perf_session__process_events util/session.c:2297 #12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 frank-w#19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 frank-w#20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 Indirect leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce520907 in nsinfo__copy util/namespaces.c:169 #2 0x559bce50821b in map__new util/map.c:168 #3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #4 0x559bce512f6b in machines__deliver_event util/session.c:1481 #5 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #6 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #8 0x559bce519bea in __perf_session__process_events util/session.c:2268 #9 0x559bce519bea in perf_session__process_events util/session.c:2297 #10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210315045641.700430-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 21e3980 ] vctrl_enable() and vctrl_disable() call regulator_enable() and regulator_disable(), respectively. However, vctrl_* are regulator ops and should not be calling the locked regulator APIs. Doing so results in a lockdep warning. Instead of exporting more internal regulator ops, model the ctrl supply as an actual supply to vctrl-regulator. At probe time this driver still needs to use the consumer API to fetch its constraints, but otherwise lets the regulator core handle the upstream supply for it. The enable/disable/is_enabled ops are not removed, but now only track state internally. This preserves the original behavior with the ops being available, but one could argue that the original behavior was already incorrect: the internal state would not match the upstream supply if that supply had another consumer that enabled the supply, while vctrl-regulator was not enabled. The lockdep warning is as follows: WARNING: possible circular locking dependency detected 5.14.0-rc6 #2 Not tainted ------------------------------------------------------ swapper/0/1 is trying to acquire lock: ffffffc011306d00 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent (arch/arm64/include/asm/current.h:19 include/linux/ww_mutex.h:111 drivers/regulator/core.c:329) but task is already holding lock: ffffff8004a77160 (regulator_ww_class_mutex){+.+.}-{3:3}, at: regulator_lock_recursive (drivers/regulator/core.c:156 drivers/regulator/core.c:263) which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (regulator_ww_class_mutex){+.+.}-{3:3}: __mutex_lock_common (include/asm-generic/atomic-instrumented.h:606 include/asm-generic/atomic-long.h:29 kernel/locking/mutex.c:103 kernel/locking/mutex.c:144 kernel/locking/mutex.c:963) ww_mutex_lock (kernel/locking/mutex.c:1199) regulator_lock_recursive (drivers/regulator/core.c:156 drivers/regulator/core.c:263) regulator_lock_dependent (drivers/regulator/core.c:343) regulator_enable (drivers/regulator/core.c:2808) set_machine_constraints (drivers/regulator/core.c:1536) regulator_register (drivers/regulator/core.c:5486) devm_regulator_register (drivers/regulator/devres.c:196) reg_fixed_voltage_probe (drivers/regulator/fixed.c:289) platform_probe (drivers/base/platform.c:1427) [...] -> #1 (regulator_ww_class_acquire){+.+.}-{0:0}: regulator_lock_dependent (include/linux/ww_mutex.h:129 drivers/regulator/core.c:329) regulator_enable (drivers/regulator/core.c:2808) set_machine_constraints (drivers/regulator/core.c:1536) regulator_register (drivers/regulator/core.c:5486) devm_regulator_register (drivers/regulator/devres.c:196) reg_fixed_voltage_probe (drivers/regulator/fixed.c:289) [...] -> #0 (regulator_list_mutex){+.+.}-{3:3}: __lock_acquire (kernel/locking/lockdep.c:3052 (discriminator 4) kernel/locking/lockdep.c:3174 (discriminator 4) kernel/locking/lockdep.c:3789 (discriminator 4) kernel/locking/lockdep.c:5015 (discriminator 4)) lock_acquire (arch/arm64/include/asm/percpu.h:39 kernel/locking/lockdep.c:438 kernel/locking/lockdep.c:5627) __mutex_lock_common (include/asm-generic/atomic-instrumented.h:606 include/asm-generic/atomic-long.h:29 kernel/locking/mutex.c:103 kernel/locking/mutex.c:144 kernel/locking/mutex.c:963) mutex_lock_nested (kernel/locking/mutex.c:1125) regulator_lock_dependent (arch/arm64/include/asm/current.h:19 include/linux/ww_mutex.h:111 drivers/regulator/core.c:329) regulator_enable (drivers/regulator/core.c:2808) vctrl_enable (drivers/regulator/vctrl-regulator.c:400) _regulator_do_enable (drivers/regulator/core.c:2617) _regulator_enable (drivers/regulator/core.c:2764) regulator_enable (drivers/regulator/core.c:308 drivers/regulator/core.c:2809) _set_opp (drivers/opp/core.c:819 drivers/opp/core.c:1072) dev_pm_opp_set_rate (drivers/opp/core.c:1164) set_target (drivers/cpufreq/cpufreq-dt.c:62) __cpufreq_driver_target (drivers/cpufreq/cpufreq.c:2216 drivers/cpufreq/cpufreq.c:2271) cpufreq_online (drivers/cpufreq/cpufreq.c:1488 (discriminator 2)) cpufreq_add_dev (drivers/cpufreq/cpufreq.c:1563) subsys_interface_register (drivers/base/bus.c:?) cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2819) dt_cpufreq_probe (drivers/cpufreq/cpufreq-dt.c:344) [...] other info that might help us debug this: Chain exists of: regulator_list_mutex --> regulator_ww_class_acquire --> regulator_ww_class_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(regulator_ww_class_mutex); lock(regulator_ww_class_acquire); lock(regulator_ww_class_mutex); lock(regulator_list_mutex); *** DEADLOCK *** 6 locks held by swapper/0/1: #0: ffffff8002d32188 (&dev->mutex){....}-{3:3}, at: __device_driver_lock (drivers/base/dd.c:1030) #1: ffffffc0111a0520 (cpu_hotplug_lock){++++}-{0:0}, at: cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2792 (discriminator 2)) #2: ffffff8002a8d918 (subsys mutex#9){+.+.}-{3:3}, at: subsys_interface_register (drivers/base/bus.c:1033) #3: ffffff800341bb90 (&policy->rwsem){+.+.}-{3:3}, at: cpufreq_online (include/linux/bitmap.h:285 include/linux/cpumask.h:405 drivers/cpufreq/cpufreq.c:1399) #4: ffffffc011f0b7b8 (regulator_ww_class_acquire){+.+.}-{0:0}, at: regulator_enable (drivers/regulator/core.c:2808) #5: ffffff8004a77160 (regulator_ww_class_mutex){+.+.}-{3:3}, at: regulator_lock_recursive (drivers/regulator/core.c:156 drivers/regulator/core.c:263) stack backtrace: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.14.0-rc6 #2 7c8f8996d021ed0f65271e6aeebf7999de74a9fa Hardware name: Google Scarlet (DT) Call trace: dump_backtrace (arch/arm64/kernel/stacktrace.c:161) show_stack (arch/arm64/kernel/stacktrace.c:218) dump_stack_lvl (lib/dump_stack.c:106 (discriminator 2)) dump_stack (lib/dump_stack.c:113) print_circular_bug (kernel/locking/lockdep.c:?) check_noncircular (kernel/locking/lockdep.c:?) __lock_acquire (kernel/locking/lockdep.c:3052 (discriminator 4) kernel/locking/lockdep.c:3174 (discriminator 4) kernel/locking/lockdep.c:3789 (discriminator 4) kernel/locking/lockdep.c:5015 (discriminator 4)) lock_acquire (arch/arm64/include/asm/percpu.h:39 kernel/locking/lockdep.c:438 kernel/locking/lockdep.c:5627) __mutex_lock_common (include/asm-generic/atomic-instrumented.h:606 include/asm-generic/atomic-long.h:29 kernel/locking/mutex.c:103 kernel/locking/mutex.c:144 kernel/locking/mutex.c:963) mutex_lock_nested (kernel/locking/mutex.c:1125) regulator_lock_dependent (arch/arm64/include/asm/current.h:19 include/linux/ww_mutex.h:111 drivers/regulator/core.c:329) regulator_enable (drivers/regulator/core.c:2808) vctrl_enable (drivers/regulator/vctrl-regulator.c:400) _regulator_do_enable (drivers/regulator/core.c:2617) _regulator_enable (drivers/regulator/core.c:2764) regulator_enable (drivers/regulator/core.c:308 drivers/regulator/core.c:2809) _set_opp (drivers/opp/core.c:819 drivers/opp/core.c:1072) dev_pm_opp_set_rate (drivers/opp/core.c:1164) set_target (drivers/cpufreq/cpufreq-dt.c:62) __cpufreq_driver_target (drivers/cpufreq/cpufreq.c:2216 drivers/cpufreq/cpufreq.c:2271) cpufreq_online (drivers/cpufreq/cpufreq.c:1488 (discriminator 2)) cpufreq_add_dev (drivers/cpufreq/cpufreq.c:1563) subsys_interface_register (drivers/base/bus.c:?) cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2819) dt_cpufreq_probe (drivers/cpufreq/cpufreq-dt.c:344) [...] Reported-by: Brian Norris <briannorris@chromium.org> Fixes: f8702f9 ("regulator: core: Use ww_mutex for regulators locking") Fixes: e915331 ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20210825033704.3307263-3-wenst@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6fa54bc ] If em28xx_ir_init fails, it would decrease the refcount of dev. However, in the em28xx_ir_fini, when ir is NULL, it goes to ref_put and decrease the refcount of dev. This will lead to a refcount bug. Fix this bug by removing the kref_put in the error handling code of em28xx_ir_init. refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 7 at lib/refcount.c:28 refcount_warn_saturate+0x18e/0x1a0 lib/refcount.c:28 Modules linked in: CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.13.0 #3 Workqueue: usb_hub_wq hub_event RIP: 0010:refcount_warn_saturate+0x18e/0x1a0 lib/refcount.c:28 Call Trace: kref_put.constprop.0+0x60/0x85 include/linux/kref.h:69 em28xx_usb_disconnect.cold+0xd7/0xdc drivers/media/usb/em28xx/em28xx-cards.c:4150 usb_unbind_interface+0xbf/0x3a0 drivers/usb/core/driver.c:458 __device_release_driver drivers/base/dd.c:1201 [inline] device_release_driver_internal+0x22a/0x230 drivers/base/dd.c:1232 bus_remove_device+0x108/0x160 drivers/base/bus.c:529 device_del+0x1fe/0x510 drivers/base/core.c:3540 usb_disable_device+0xd1/0x1d0 drivers/usb/core/message.c:1419 usb_disconnect+0x109/0x330 drivers/usb/core/hub.c:2221 hub_port_connect drivers/usb/core/hub.c:5151 [inline] hub_port_connect_change drivers/usb/core/hub.c:5440 [inline] port_event drivers/usb/core/hub.c:5586 [inline] hub_event+0xf81/0x1d40 drivers/usb/core/hub.c:5668 process_one_work+0x2c9/0x610 kernel/workqueue.c:2276 process_scheduled_works kernel/workqueue.c:2338 [inline] worker_thread+0x333/0x5b0 kernel/workqueue.c:2424 kthread+0x188/0x1d0 kernel/kthread.c:319 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 Reported-by: Dongliang Mu <mudongliangabcd@gmail.com> Fixes: ac56886 ("media: em28xx: Fix possible memory leak of em28xx struct") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 57f0ff0 upstream. It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 #1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 #2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 #3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 #4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 #5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 #6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 #7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 #8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 #9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame #2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <mpetlan@redhat.com> CC: Milian Wolff <milian.wolff@kdab.com> Cc: Jiri Olsa <jolsa@redhat.com> Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/20210719145332.29747-1-mpetlan@redhat.com Reported-by: Juri Lelli <jlelli@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 98e2e40 upstream. When the refcount is decreased to 0, the resource reclamation branch is entered. Before CPU0 reaches the race point (1), CPU1 may obtain the spinlock and traverse the rbtree to find 'root', see nilfs_lookup_root(). Although CPU1 will call refcount_inc() to increase the refcount, it is obviously too late. CPU0 will release 'root' directly, CPU1 then accesses 'root' and triggers UAF. Use refcount_dec_and_lock() to ensure that both the operations of decrease refcount to 0 and link deletion are lock protected eliminates this risk. CPU0 CPU1 nilfs_put_root(): <-------- (1) spin_lock(&nilfs->ns_cptree_lock); rb_erase(&root->rb_node, &nilfs->ns_cptree); spin_unlock(&nilfs->ns_cptree_lock); kfree(root); <-------- use-after-free refcount_t: underflow; use-after-free. WARNING: CPU: 2 PID: 9476 at lib/refcount.c:28 \ refcount_warn_saturate+0x1cf/0x210 lib/refcount.c:28 Modules linked in: CPU: 2 PID: 9476 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... RIP: 0010:refcount_warn_saturate+0x1cf/0x210 lib/refcount.c:28 ... ... Call Trace: __refcount_sub_and_test include/linux/refcount.h:283 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] nilfs_put_root+0xc1/0xd0 fs/nilfs2/the_nilfs.c:795 nilfs_segctor_destroy fs/nilfs2/segment.c:2749 [inline] nilfs_detach_log_writer+0x3fa/0x570 fs/nilfs2/segment.c:2812 nilfs_put_super+0x2f/0xf0 fs/nilfs2/super.c:467 generic_shutdown_super+0xcd/0x1f0 fs/super.c:464 kill_block_super+0x4a/0x90 fs/super.c:1446 deactivate_locked_super+0x6a/0xb0 fs/super.c:335 deactivate_super+0x85/0x90 fs/super.c:366 cleanup_mnt+0x277/0x2e0 fs/namespace.c:1118 __cleanup_mnt+0x15/0x20 fs/namespace.c:1125 task_work_run+0x8e/0x110 kernel/task_work.c:151 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:164 [inline] exit_to_user_mode_prepare+0x13c/0x170 kernel/entry/common.c:191 syscall_exit_to_user_mode+0x16/0x30 kernel/entry/common.c:266 do_syscall_64+0x45/0x80 arch/x86/entry/common.c:56 entry_SYSCALL_64_after_hwframe+0x44/0xa9 There is no reproduction program, and the above is only theoretical analysis. Link: https://lkml.kernel.org/r/1629859428-5906-1-git-send-email-konishi.ryusuke@gmail.com Fixes: ba65ae4 ("nilfs2: add checkpoint tree to nilfs object") Link: https://lkml.kernel.org/r/20210723012317.4146-1-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 8f96a5b ] We update the ctime/mtime of a block device when we remove it so that blkid knows the device changed. However we do this by re-opening the block device and calling filp_update_time. This is more correct because it'll call the inode->i_op->update_time if it exists, but the block dev inodes do not do this. Instead call generic_update_time() on the bd_inode in order to avoid the blkdev_open path and get rid of the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc2+ #406 Not tainted ------------------------------------------------------ losetup/11596 is trying to acquire lock: ffff939640d2f538 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x67/0x5e0 but task is already holding lock: ffff939655510c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (&lo->lo_mutex){+.+.}-{3:3}: __mutex_lock+0x7d/0x750 lo_open+0x28/0x60 [loop] blkdev_get_whole+0x25/0xf0 blkdev_get_by_dev.part.0+0x168/0x3c0 blkdev_open+0xd2/0xe0 do_dentry_open+0x161/0x390 path_openat+0x3cc/0xa20 do_filp_open+0x96/0x120 do_sys_openat2+0x7b/0x130 __x64_sys_openat+0x46/0x70 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #3 (&disk->open_mutex){+.+.}-{3:3}: __mutex_lock+0x7d/0x750 blkdev_get_by_dev.part.0+0x56/0x3c0 blkdev_open+0xd2/0xe0 do_dentry_open+0x161/0x390 path_openat+0x3cc/0xa20 do_filp_open+0x96/0x120 file_open_name+0xc7/0x170 filp_open+0x2c/0x50 btrfs_scratch_superblocks.part.0+0x10f/0x170 btrfs_rm_device.cold+0xe8/0xed btrfs_ioctl+0x2a31/0x2e70 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #2 (sb_writers#12){.+.+}-{0:0}: lo_write_bvec+0xc2/0x240 [loop] loop_process_work+0x238/0xd00 [loop] process_one_work+0x26b/0x560 worker_thread+0x55/0x3c0 kthread+0x140/0x160 ret_from_fork+0x1f/0x30 -> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}: process_one_work+0x245/0x560 worker_thread+0x55/0x3c0 kthread+0x140/0x160 ret_from_fork+0x1f/0x30 -> #0 ((wq_completion)loop0){+.+.}-{0:0}: __lock_acquire+0x10ea/0x1d90 lock_acquire+0xb5/0x2b0 flush_workqueue+0x91/0x5e0 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x660 [loop] block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&lo->lo_mutex); lock(&disk->open_mutex); lock(&lo->lo_mutex); lock((wq_completion)loop0); *** DEADLOCK *** 1 lock held by losetup/11596: #0: ffff939655510c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop] stack backtrace: CPU: 1 PID: 11596 Comm: losetup Not tainted 5.14.0-rc2+ #406 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack_lvl+0x57/0x72 check_noncircular+0xcf/0xf0 ? stack_trace_save+0x3b/0x50 __lock_acquire+0x10ea/0x1d90 lock_acquire+0xb5/0x2b0 ? flush_workqueue+0x67/0x5e0 ? lockdep_init_map_type+0x47/0x220 flush_workqueue+0x91/0x5e0 ? flush_workqueue+0x67/0x5e0 ? verify_cpu+0xf0/0x100 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x660 [loop] ? blkdev_ioctl+0x8d/0x2a0 block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 8253a34 upstream. When passing 'phys' in the devicetree to describe the USB PHY phandle (which is the recommended way according to Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt) the following NULL pointer dereference is observed on i.MX7 and i.MX8MM: [ 1.489344] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 [ 1.498170] Mem abort info: [ 1.500966] ESR = 0x96000044 [ 1.504030] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.509356] SET = 0, FnV = 0 [ 1.512416] EA = 0, S1PTW = 0 [ 1.515569] FSC = 0x04: level 0 translation fault [ 1.520458] Data abort info: [ 1.523349] ISV = 0, ISS = 0x00000044 [ 1.527196] CM = 0, WnR = 1 [ 1.530176] [0000000000000098] user address but active_mm is swapper [ 1.536544] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 1.542125] Modules linked in: [ 1.545190] CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.14.0-dirty #3 [ 1.551901] Hardware name: Kontron i.MX8MM N801X S (DT) [ 1.557133] Workqueue: events_unbound deferred_probe_work_func [ 1.562984] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--) [ 1.568998] pc : imx7d_charger_detection+0x3f0/0x510 [ 1.573973] lr : imx7d_charger_detection+0x22c/0x510 This happens because the charger functions check for the phy presence inside the imx_usbmisc_data structure (data->usb_phy), but the chipidea core populates the usb_phy passed via 'phys' inside 'struct ci_hdrc' (ci->usb_phy) instead. This causes the NULL pointer dereference inside imx7d_charger_detection(). Fix it by also searching for 'phys' in case 'fsl,usbphy' is not found. Tested on a imx7s-warp board. Fixes: 746f316 ("usb: chipidea: introduce imx7d USB charger detection") Cc: stable@vger.kernel.org Reported-by: Heiko Thiery <heiko.thiery@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210921113754.767631-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…rbage value [ Upstream commit 902c0b1 ] Currently, when the rule related to IDLETIMER is added, idletimer_tg timer structure is initialized by kmalloc on executing idletimer_tg_create function. However, in this process timer->timer_type is not defined to a specific value. Thus, timer->timer_type has garbage value and it occurs kernel panic. So, this commit fixes the panic by initializing timer->timer_type using kzalloc instead of kmalloc. Test commands: # iptables -A OUTPUT -j IDLETIMER --timeout 1 --label test $ cat /sys/class/xt_idletimer/timers/test Killed Splat looks like: BUG: KASAN: user-memory-access in alarm_expires_remaining+0x49/0x70 Read of size 8 at addr 0000002e8c7bc4c8 by task cat/917 CPU: 12 PID: 917 Comm: cat Not tainted 5.14.0+ #3 79940a339f71eb14fc81aee1757a20d5bf13eb0e Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: dump_stack_lvl+0x6e/0x9c kasan_report.cold+0x112/0x117 ? alarm_expires_remaining+0x49/0x70 __asan_load8+0x86/0xb0 alarm_expires_remaining+0x49/0x70 idletimer_tg_show+0xe5/0x19b [xt_IDLETIMER 11219304af9316a21bee5ba9d58f76a6b9bccc6d] dev_attr_show+0x3c/0x60 sysfs_kf_seq_show+0x11d/0x1f0 ? device_remove_bin_file+0x20/0x20 kernfs_seq_show+0xa4/0xb0 seq_read_iter+0x29c/0x750 kernfs_fop_read_iter+0x25a/0x2c0 ? __fsnotify_parent+0x3d1/0x570 ? iov_iter_init+0x70/0x90 new_sync_read+0x2a7/0x3d0 ? __x64_sys_llseek+0x230/0x230 ? rw_verify_area+0x81/0x150 vfs_read+0x17b/0x240 ksys_read+0xd9/0x180 ? vfs_write+0x460/0x460 ? do_syscall_64+0x16/0xc0 ? lockdep_hardirqs_on+0x79/0x120 __x64_sys_read+0x43/0x50 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f0cdc819142 Code: c0 e9 c2 fe ff ff 50 48 8d 3d 3a ca 0a 00 e8 f5 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 RSP: 002b:00007fff28eee5b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f0cdc819142 RDX: 0000000000020000 RSI: 00007f0cdc032000 RDI: 0000000000000003 RBP: 00007f0cdc032000 R08: 00007f0cdc031010 R09: 0000000000000000 R10: 0000000000000022 R11: 0000000000000246 R12: 00005607e9ee31f0 R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 Fixes: 68983a3 ("netfilter: xtables: Add snapshot of hardidletimer target") Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

…kernel/git/at91/linux into arm/fixes AT91 fixes for 6.1 #3 It contains: - build fix for SAMA5D3 devices which don't have an L2 cache and due to this accesssing outer_cache.write_sec in sama5_secure_cache_init() could throw undefined reference to `outer_cache' if CONFIG_OUTER_CACHE is disabled from common sama5_defconfig. * tag 'at91-fixes-6.1-3' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: fix build for SAMA5D3 w/o L2 cache Link: https://lore.kernel.org/r/20221125093521.382105-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>

When sending packets between nodes in netns, it calls tipc_lxc_xmit() for peer node to receive the packets where tipc_sk_mcast_rcv()/tipc_sk_rcv() might be called, and it's pretty much like in tipc_rcv(). Currently the local 'node rw lock' is held during calling tipc_lxc_xmit() to protect the peer_net not being freed by another thread. However, when receiving these packets, tipc_node_add_conn() might be called where the peer 'node rw lock' is acquired. Then a dead lock warning is triggered by lockdep detector, although it is not a real dead lock: WARNING: possible recursive locking detected -------------------------------------------- conn_server/1086 is trying to acquire lock: ffff8880065cb020 (&n->lock#2){++--}-{2:2}, \ at: tipc_node_add_conn.cold.76+0xaa/0x211 [tipc] but task is already holding lock: ffff8880065cd020 (&n->lock#2){++--}-{2:2}, \ at: tipc_node_xmit+0x285/0xb30 [tipc] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&n->lock#2); lock(&n->lock#2); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by conn_server/1086: #0: ffff8880036d1e40 (sk_lock-AF_TIPC){+.+.}-{0:0}, \ at: tipc_accept+0x9c0/0x10b0 [tipc] #1: ffff8880036d5f80 (sk_lock-AF_TIPC/1){+.+.}-{0:0}, \ at: tipc_accept+0x363/0x10b0 [tipc] #2: ffff8880065cd020 (&n->lock#2){++--}-{2:2}, \ at: tipc_node_xmit+0x285/0xb30 [tipc] #3: ffff888012e13370 (slock-AF_TIPC){+...}-{2:2}, \ at: tipc_sk_rcv+0x2da/0x1b40 [tipc] Call Trace: <TASK> dump_stack_lvl+0x44/0x5b __lock_acquire.cold.77+0x1f2/0x3d7 lock_acquire+0x1d2/0x610 _raw_write_lock_bh+0x38/0x80 tipc_node_add_conn.cold.76+0xaa/0x211 [tipc] tipc_sk_finish_conn+0x21e/0x640 [tipc] tipc_sk_filter_rcv+0x147b/0x3030 [tipc] tipc_sk_rcv+0xbb4/0x1b40 [tipc] tipc_lxc_xmit+0x225/0x26b [tipc] tipc_node_xmit.cold.82+0x4a/0x102 [tipc] __tipc_sendstream+0x879/0xff0 [tipc] tipc_accept+0x966/0x10b0 [tipc] do_accept+0x37d/0x590 This patch avoids this warning by not holding the 'node rw lock' before calling tipc_lxc_xmit(). As to protect the 'peer_net', rcu_read_lock() should be enough, as in cleanup_net() when freeing the netns, it calls synchronize_rcu() before the free is continued. Also since tipc_lxc_xmit() is like the RX path in tipc_rcv(), it makes sense to call it under rcu_read_lock(). Note that the right lock order must be: rcu_read_lock(); tipc_node_read_lock(n); tipc_node_read_unlock(n); tipc_lxc_xmit(); rcu_read_unlock(); instead of: tipc_node_read_lock(n); rcu_read_lock(); tipc_node_read_unlock(n); tipc_lxc_xmit(); rcu_read_unlock(); and we have to call tipc_node_read_lock/unlock() twice in tipc_node_xmit(). Fixes: f73b128 ("tipc: improve throughput between nodes in netns") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/5bdd1f8fee9db695cfff4528a48c9b9d0523fb00.1670110641.git.lucien.xin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

dcaratti and others added 30 commits May 30, 2018 07:52

frank-w deleted the 4.14-hdmi branch July 21, 2018 13:36

frank-w restored the 4.14-hdmi branch November 20, 2018 11:20

frank-w deleted the 4.14-hdmi branch November 22, 2018 12:24

frank-w restored the 4.14-hdmi branch December 17, 2018 13:28

frank-w deleted the 4.14-hdmi branch April 26, 2019 17:55

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

4.14 hdmi #3

4.14 hdmi #3

d3adme4t commented Jun 4, 2018

4.14 hdmi #3

4.14 hdmi #3

Conversation

d3adme4t commented Jun 4, 2018