Sync up with Linus #27
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
As the HDMI registers of the TDA998x chips are accessed by pages, the page register must be protected. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
When the HDMI cable is disconnected and reconnected, EDID reading is called too early raising a EDID read timeout. This patch uses the system work queue to delay the notification of the HDMI connect/disconnect event. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
skb->transport_header might not be valid when we do a reverse decode because the ipv6 tunnel error handlers don't update it to the inner transport header. This leads to a wrong offset calculation and to wrong layer 4 informations. We fix this by using the size of the ipv6 header as the first offset. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
xfrm_decode_session() was originally designed for the usage in the receive path where the correct nexthdr offset is stored in IP6CB(skb)->nhoff. Over time this function spread to code that is used in the output path (netfilter, vti) where IP6CB(skb)->nhoff is not set. As a result, we get a wrong nexthdr and the upper layer flow informations are wrong. This can leed to incorrect policy lookups. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
EBS error detection isn't supported by all FWs, so turn it on only if the FW advertises such support. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
This change has already been implemented in iwldvm:
commit a260e7b3f0307878b99d57ed1406cf2d497923b8
Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun Oct 5 09:11:14 2014 +0300
iwlwifi: dvm: drop non VO frames when flushing
Since I added the flush() callback implementation in mvm,
we got reports that the queues are stuck while roaming
or suspending.
This commit above helped much for iwldvm, implement the
same behavior for iwlmvm.
CC: <stable@vger.kernel.org> [3.16+]
Fixes: c5b0e7c ("iwlwifi: mvm: implement mac80211's flush callback")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
BAR tx cmd tid was set to non qos (8). This is wrong as BAR should be sent with the tid of the BA session. This led to a corruption in the firmware. The visible effect of this from the driver side is the BA notification that comes back after the BAR. It was botched and led to the WARNING below. ------------[ cut here ]------------ WARNING: CPU: 2 PID: 17707 at /home/tester/workspace_hostap/iwlwifi/drivers/net/wireless/iwlwifi/mvm/tx.c:976 iwl_mvm_rx_ba_notif+0x4ba/0x4d0 [iwlmvm]() Q 4500, tid 8, flow 65535 Modules linked in: iwlmvm(O) mac80211(O) iwlwifi(O) cfg80211(O) compat(O) netconsole configfs ctr ccm arc4 autofs4 microcode bnep rfcomm snd_hda_codec_hdmi snd_hda_codec_idt snd_hda_codec_generic snd_hda_intel joydev snd_hda_codec uvcvideo videobuf2_core snd_hwdep videodev snd_pcm videobuf2_vmalloc videobuf2_memops i915 snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device drm_kms_helper dell_wmi dell_laptop drm btusb bluetooth snd psmouse i2c_algo_bit sparse_keymap wmi soundcore 6lowpan_iphc dcdbas serio_raw video lpc_ich ppdev mac_hid parport_pc nfsd nfs_acl auth_rpcgss nfs fscache binfmt_misc lockd sunrpc lp parport msdos sdhci_pci sdhci mmc_core ahci libahci e1000e ptp pps_core [last unloaded: compat] CPU: 2 PID: 17707 Comm: irq/46-iwlwifi Tainted: G W O 3.14.17-patched #4 Hardware name: Dell Inc. Latitude E6430/0CPWYR, BIOS A09 12/13/2012 00000000 00000000 ebd49d6c c1616221 f985dbdc ebd49d9c c1044e44 f9861df4 ebd49dc8 0000452b f985dbdc 000003d0 f98395da f98395da ebd49f10 eaf3d8a4 0000ffff ebd49db4 c1044f03 00000009 ebd49dac f9861df4 ebd49dc8 ebd49e6 Call Trace: [<c1616221>] dump_stack+0x41/0x52 [<c1044e44>] warn_slowpath_common+0x84/0xa0 [<f98395da>] ? iwl_mvm_rx_ba_notif+0x4ba/0x4d0 [iwlmvm] [<f98395da>] ? iwl_mvm_rx_ba_notif+0x4ba/0x4d0 [iwlmvm] [<c1044f03>] warn_slowpath_fmt+0x33/0x40 [<f98395da>] iwl_mvm_rx_ba_notif+0x4ba/0x4d0 [iwlmvm] [<c10e3952>] ? ring_buffer_unlock_commit+0xa2/0xd0 [<c10e9767>] ? trace_buffer_unlock_commit+0x37/0x50 [<f98568a3>] ? iwl_tm_mvm_send_rx+0x53/0x90 [iwlmvm] [<f98327a8>] iwl_mvm_rx_dispatch+0x108/0x130 [iwlmvm] [<f9eac7e7>] iwl_pcie_irq_handler+0xf17/0x15b0 [iwlwifi] [<c10994c1>] irq_thread_fn+0x21/0x50 [<c109926c>] irq_thread+0xec/0x110 [<c10994a0>] ? irq_thread_dtor+0xb0/0xb0 [<c10993f0>] ? irq_finalize_oneshot.part.34+0xc0/0xc0 [<c1099180>] ? wake_threads_waitq+0x40/0x40 [<c1062fdb>] kthread+0x9b/0xb0 [<c1627137>] ret_from_kernel_thread+0x1b/0x28 [<c1062f40>] ? flush_kthread_worker+0x90/0x90 ---[ end trace 5e0f67374816db17 ]--- Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
…b/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * A fix for scan that fixes a firmware assertion * A fix that improves roaming behavior. Same fix has been tested for a while in iwldvm. This is a bit of a work around, but the real fix should be in mac80211 and will come later. * A fix for BARs that avoids a WARNING.
If the first queue created was failed on DQM then PQM should unregister the process from DQM. Signed-off-by: Ben Goz <ben.goz@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch replaces the two current amdkfd module parameters with a new one. The current parameters that are being replaced are: - Maximum number of HSA processes - Maximum number of queues per process The new parameter that replaces them is called "Maximum queues per device" This replacement achieves two goals: - Allows the user to have as many HSA processes as it wants (until a maximum of 512 HSA processes in Kaveri). - Removes the limitation the user had on maximum number of queues per HSA process. E.g. the user can now have processes which only have one queue and other processes which have hundreds of queues, while before the user couldn't have more than 128 queues per process (as default). The default value of the new parameter is 4096 (32 * 128, which were the defaults of the old parameters). There is almost no additional GART memory required for the default case. As a reminder, this amount of queues requires a little bit below 4MB of GART memory. v2: In addition, This patch defines a new counter for queues accounting in the DQM structure. This is done because the current counter only counts active queues which allows the user to create more queues than the max_num_of_queues_per_device module parameter allows. However, we need the current counter for the runlist packet build process, so the solution is to have a dedicated counter for this accounting. Signed-off-by: Oded Gabbay <oded.gabbay@amd.com> Reviewed-by: Ben Goz <ben.goz@amd.com>
When we have an active scheduled scan, and the RFKILL interrupt kicks in, the stack will cancel the scheduled scan as part of the down flow. But cancelling scheduled scan usually implies sending a command to the firwmare which has been killed as part of the RFKILL interrupt handling. Because of that, we returned an error to mac80211 when it asked to stop the scheduled scan and didn't notify the end of the scheduled scan. Besides a fat warning, this led to a situation in which cfg80211 would refuse any new scan request. To disentangle this, fake that the scheduled scan has been stopped without sending the command to the firwmare, return 0 after having properly let cfg80211 know that the scan has been cancelled. This is basically the same as: commit 9b520d8 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Tue Nov 4 15:54:11 2014 +0200 iwlwifi: mvm: abort scan upon RFKILL This code existed but not for all the different FW APIs we support. Fix this. but for the scheduled scan case. Link: http://permalink.gmane.org/gmane.linux.kernel.wireless.general/133232 Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
The commit 3b8a3c0 ("powerpc/pseries: Fix endiannes issue in RTAS call from xmon") was fixing an endianness issue in the call made from xmon to RTAS. However, as Michael Ellerman noticed, this fix was not complete, the token value was not byte swapped. This lead to call an unexpected and most of the time unexisting RTAS function, which is silently ignored by RTAS. This fix addresses this hole. Reported-by: Michael Ellerman <mpe@ellerman.id.au> Cc: stable@vger.kernel.org Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
…b/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * one fix for rfkill while scheduled scan is running. Linus's system hit this issue. WiFi would be unavailable after this has happpened because of bad state in cfg80211.
Fixes a case where we call vmw_fifo_idle() from within a wait function with task state !TASK_RUNNING, which is illegal. In addition, make the locking fine-grained, so that it is performed once for every read- and write operation. This is of course more costly, but we don't perform much register access in the timing critical paths anyway. Instead we have the extra benefit of being sure that we don't forget the hw lock around register accesses. I think currently the kms code was quite buggy w r t this. This fixes Red Hat Bugzilla Bug 1180796 Cc: stable@vger.kernel.org Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
To fix invalid hardware accesses, the commit 872b5d8 ("ath9k: do not access hardware on IRQs during reset") made the irq handler ignore interrupts emitted after queueing a hardware reset (which disables the IRQ). This left a small time window for the IRQ to get re-enabled by the tasklet, which caused IRQ storms. Instead of returning IRQ_NONE when ATH_OP_HW_RESET is set, disable the IRQ entirely for the duration of the reset. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The I2C address for the TDA9989 and TDA19989 is fixed at 0x34 but the two LSBs of the TDA19988's address are set by two configuration pins on the chip. Irrespective of the chip, the associated CEC peripheral's I2C address is based upon the main I2C address. This patch avoids any special handling required to support systems that contain multiple TDA19988 devices on the same I2C bus. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Put controller into init mode in network stop to end pending transmissions. The issue is observed in cases when transmitted frame is not acked. Signed-off-by: Viktor Babrian <babrian.viktor@renyi.mta.hu> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
…mash/linux into drm-fixes fix a vmwgfx regression sleeping wrong task state. * 'vmwgfx-fixes-3.19' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Replace the hw mutex with a hw spinlock
LPCR_PECE1 bit controls whether decrementer interrupts are allowed to cause exit from power-saving mode. While waking up from winkle, restoring LPCR with LPCR_PECE1 set (i.e Decrementer interrupts allowed) can cause issue in the following scenario: - All the threads in a core are offlined. The core enters deep winkle. - Spurious interrupt wakes up a thread in the core. Here LPCR is restored with LPCR_PECE1 bit set. - Since it was a spurious interrupt on a offline thread, the thread clears the interrupt and goes back to winkle. - Here before the thread executes winkle and puts the core into deep winkle, if a decrementer interrupt occurs on any of the sibling threads in the core that thread wakes up. - Since in offline loop we are flushing interrupt only in case of external interrupt, the decrementer interrupt does not get flushed. So at this stage the thread is stuck in this is loop of waking up at 0x100 due to decrementer interrupt, not flushing the interrupt as only external interrupts get flushed, entering winkle, waking up at 0x100 again. Fix this by programming PORE to restore LPCR with LPCR_PECE1 bit cleared when waking up from winkle. Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch fixes the behavior of kgd_init_pipeline in that this function shouldn't automatically increase the pipe_id argument by 1 right at the start of the function. This is because the first_pipe value might not be always 1, and because a proper interface function should not hide this info inside its implementation. In other words, the calling function should provide the real pipe_id and not count on kgd_init_pipeline to "fix" it. Signed-off-by: Oded Gabbay <oded.gabbay@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
This patch fixes a bug when calling to init_pipeline() interface. The index that was passed to that function didn't take into account the first_pipe value, which represents the first pipe index that is under amdkfd's responsibility. Signed-off-by: Oded Gabbay <oded.gabbay@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
This patch fixes a bug where the first_pipe index passed into init_pipelines() was a #define instead of the value that is passed into amdkfd by radeon Signed-off-by: Oded Gabbay <oded.gabbay@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
get_page_entry calculates the GART page table entry, which is just written to the GART page table by set_page_entry. This is a prerequisite for the following fix. Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GART table BO has to be moved out of VRAM for suspend/resume. Any
updates to the GART table during that time were silently dropped without
this change. This caused GPU lockups on resume in some cases, see the bug
reports referenced below.
This might also make GPU reset more robust in some cases, as we no longer
rely on the GART table in VRAM being preserved across the GPU
lockup/reset.
v2: Add logic to radeon_gart_table_vram_pin directly instead of
reinstating radeon_gart_restore
v3: Move code after assignment of rdev->gart.table_addr so that the GART
TLB flush can work as intended, add code comment explaining why we're
doing this
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85204
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86267
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
radeon_vm_map_gart can use rdev->gart.pages_entry instead. Also move the masking of the page address to radeon_vm_map_gart from its callers. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James reported: > After e513cc1 module: Remove stop_machine from module unloading, > module_refcount() is returning (unsigned long)-1 when called from within > a routine that runs in module_exit. This is confusing the scsi device > put code which is coded to detect a module_refcount() of zero for > running within a module exit routine and not try to do another > module_put. The fix is to restore the original behaviour of > module_refcount() and return zero if we're running inside an exit > routine. The correct fix is to turn try_module_get() into __module_get(), and always do the module_put(). Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In normal cases (i.e. when we are fully associated), cfg80211 takes care of removing all the stations before calling suspend in mac80211. But in the corner case when we suspend during authentication or association, mac80211 needs to roll back the station states. But we shouldn't roll back the station states in the suspend function, because this is taken care of in other parts of the code, except for WDS interfaces. For AP types of interfaces, cfg80211 takes care of disconnecting all stations before calling the driver's suspend code. For station interfaces, this is done in the quiesce code. For WDS interfaces we still need to do it here, so move the code into a new switch case for WDS. Cc: stable@kernel.org [3.15+] Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
HT Control field may also be present in management frames, as defined in 8.2.4.1.10 of 802.11-2012. Account for this in calculation of header length. Signed-off-by: Fred Chou <fred.chou.nd@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix a regression introduced by commit a5e7069 ("mac80211: add radiotap flag and handling for 5/10 MHz") where the IEEE80211_CHAN_CCK channel type flag was incorrectly replaced by the IEEE80211_CHAN_OFDM flag. This commit fixes that by using the CCK flag again. Cc: stable@vger.kernel.org Fixes: a5e7069 ("mac80211: add radiotap flag and handling for 5/10 MHz") Signed-off-by: Mathy Vanhoef <vanhoefm@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case userspace attempts to obtain key information for or delete a unicast key, this is currently erroneously rejected unless the driver sets the WIPHY_FLAG_IBSS_RSN flag. Apparently enough drivers do so it was never noticed. Fix that, and while at it fix a potential memory leak: the error path in the get_key() function was placed after allocating a message but didn't free it - move it to a better place. Luckily admin permissions are needed to call this operation. Cc: stable@vger.kernel.org Fixes: e31b821 ("cfg80211/mac80211: allow per-station GTKs") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
dma_map_single() may fail if an IOMMU or swiotlb is in use, so we need to check for this. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
- Use the return value of dma_map_single(), rather than calling virt_to_page() separately - Check for mapping failue - Call dma_unmap_single() rather than dma_sync_single_for_cpu() Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings says: ==================== Fixes for sh_eth #3 I'm continuing review and testing of Ethernet support on the R-Car H2 chip. This series fixes the last of the more serious issues I've found. These are not tested on any of the other supported chips. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
…os too Lubomir Rintel reported that during replacing a route the interface reference counter isn't correctly decremented. To quote bug <https://bugzilla.kernel.org/show_bug.cgi?id=91941>: | [root@rhel7-5 lkundrak]# sh -x lal | + ip link add dev0 type dummy | + ip link set dev0 up | + ip link add dev1 type dummy | + ip link set dev1 up | + ip addr add 2001:db8:8086::2/64 dev dev0 | + ip route add 2001:db8:8086::/48 dev dev0 proto static metric 20 | + ip route add 2001:db8:8088::/48 dev dev1 proto static metric 10 | + ip route replace 2001:db8:8086::/48 dev dev1 proto static metric 20 | + ip link del dev0 type dummy | Message from syslogd@rhel7-5 at Jan 23 10:54:41 ... | kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2 | | Message from syslogd@rhel7-5 at Jan 23 10:54:51 ... | kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2 During replacement of a rt6_info we must walk all parent nodes and check if the to be replaced rt6_info got propagated. If so, replace it with an alive one. Fixes: 4a287eb ("IPv6 routing, NLM_F_* flag support: REPLACE and EXCL flags support, warn about missing CREATE flag") Reported-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: David S. Miller <davem@davemloft.net>
…t/klassert/ipsec Steffen Klassert says: ==================== ipsec 2015-01-26 Just two small fixes for _decode_session6() where we might decode to wrong header information in some rare situations. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
With the commit d75b1ad ("net: less interrupt masking in NAPI") napi repoll is done only when work_done == budget. When in busy_poll is we return 0 in napi_poll. We should return budget. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
…nel/git/rusty/linux Pull one more module fix from Rusty Russell: "SCSI was using module_refcount() to figure out when the module was unloading: this broke with new atomic refcounting. The code is still suspicious, but this solves the WARN_ON()" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: scsi: always increment reference count
…el/git/mpe/linux Pull powerpc fixes from Michael Ellerman: "Two powerpc fixes" * tag 'powerpc-3.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/powernv: Restore LPCR with LPCR_PECE1 cleared powerpc/xmon: Fix another endiannes issue in RTAS call from xmon
In the case when alloc_netdev fails we return NULL to a caller. But there is no check for NULL in the probe drivers. This patch changes NULL to an error pointer. The function description is amended to reflect what we may get returned. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Don't OOPS on socket AIO, from Christoph Hellwig.
2) Scheduled scans should be aborted upon RFKILL, from Emmanuel
Grumbach.
3) Fix sleep in atomic context in kvaser_usb, from Ahmed S Darwish.
4) Fix RCU locking across copy_to_user() in bpf code, from Alexei
Starovoitov.
5) Lots of crash, memory leak, short TX packet et al bug fixes in
sh_eth from Ben Hutchings.
6) Fix memory corruption in SCTP wrt. INIT collitions, from Daniel
Borkmann.
7) Fix return value logic for poll handlers in netxen, enic, and bnx2x.
From Eric Dumazet and Govindarajulu Varadarajan.
8) Header length calculation fix in mac80211 from Fred Chou.
9) mv643xx_eth doesn't handle highmem correctly in non-TSO code paths.
From Ezequiel Garcia.
10) udp_diag has bogus logic in it's hash chain skipping, copy same fix
tcp diag used. From Herbert Xu.
11) amd-xgbe programs wrong rx flow control register, from Thomas
Lendacky.
12) Fix race leading to use after free in ping receive path, from Subash
Abhinov Kasiviswanathan.
13) Cache redirect routes otherwise we can get a heavy backlog of rcu
jobs liberating DST_NOCACHE entries. From Hannes Frederic Sowa.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits)
net: don't OOPS on socket aio
stmmac: prevent probe drivers to crash kernel
bnx2x: fix napi poll return value for repoll
ipv6: replacing a rt6_info needs to purge possible propagated rt6_infos too
sh_eth: Fix DMA-API usage for RX buffers
sh_eth: Check for DMA mapping errors on transmit
sh_eth: Ensure DMA engines are stopped before freeing buffers
sh_eth: Remove RX overflow log messages
ping: Fix race in free in receive path
udp_diag: Fix socket skipping within chain
can: kvaser_usb: Fix state handling upon BUS_ERROR events
can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT
can: kvaser_usb: Send correct context to URB completion
can: kvaser_usb: Do not sleep in atomic context
ipv4: try to cache dst_entries which would cause a redirect
samples: bpf: relax test_maps check
bpf: rcu lock must not be held when calling copy_to_user()
net: sctp: fix slab corruption from use after free on INIT collisions
net: mv643xx_eth: Fix highmem support in non-TSO egress path
sh_eth: Fix serialisation of interrupt disable with interrupt & NAPI handlers
...
Pull drm fixes from Dave Airlie:
"This feels larger than I'd like but its for three reasons.
a) amdkfd finalising the API more, this is a new feature introduced
last merge window, and I'd prefer to make the tweaks to the API
before it first gets into a stable release.
b) radeon regression required splitting an internal API to fix
properly, so it just changed a few more lines
c) vmwgfx fix changes a lock from a mutex->spin lock, this is fallout
from the new sleep checking.
Otherwise there is just some tda998x fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: Remove rdev->gart.pages_addr array
drm/radeon: Restore GART table contents after pinning it in VRAM v3
drm/radeon: Split off gart_get_page_entry ASIC hook from set_page_entry
drm/amdkfd: Fix bug in call to init_pipelines()
drm/amdkfd: Fix bug in pipelines initialization
drm/radeon: Don't increment pipe_id in kgd_init_pipeline
drm/i2c: tda998x: set the CEC I2C address based on the slave I2C address
drm/vmwgfx: Replace the hw mutex with a hw spinlock
drm/amdkfd: Allow user to limit only queues per device
drm/amdkfd: PQM handle queue creation fault
drm: tda998x: Fix EDID read timeout on HDMI connect
drm: tda998x: Protect the page register
dabrace
pushed a commit
that referenced
this pull request
Aug 5, 2015
Nikolay has reported a hang when a memcg reclaim got stuck with the following backtrace: PID: 18308 TASK: ffff883d7c9b0a30 CPU: 1 COMMAND: "rsync" #0 __schedule at ffffffff815ab152 #1 schedule at ffffffff815ab76e #2 schedule_timeout at ffffffff815ae5e5 #3 io_schedule_timeout at ffffffff815aad6a #4 bit_wait_io at ffffffff815abfc6 #5 __wait_on_bit at ffffffff815abda5 #6 wait_on_page_bit at ffffffff8111fd4f #7 shrink_page_list at ffffffff81135445 #8 shrink_inactive_list at ffffffff81135845 #9 shrink_lruvec at ffffffff81135ead #10 shrink_zone at ffffffff811360c3 #11 shrink_zones at ffffffff81136eff #12 do_try_to_free_pages at ffffffff8113712f #13 try_to_free_mem_cgroup_pages at ffffffff811372be #14 try_charge at ffffffff81189423 #15 mem_cgroup_try_charge at ffffffff8118c6f5 #16 __add_to_page_cache_locked at ffffffff8112137d #17 add_to_page_cache_lru at ffffffff81121618 #18 pagecache_get_page at ffffffff8112170b #19 grow_dev_page at ffffffff811c8297 #20 __getblk_slow at ffffffff811c91d6 #21 __getblk_gfp at ffffffff811c92c1 #22 ext4_ext_grow_indepth at ffffffff8124565c #23 ext4_ext_create_new_leaf at ffffffff81246ca8 #24 ext4_ext_insert_extent at ffffffff81246f09 #25 ext4_ext_map_blocks at ffffffff8124a848 #26 ext4_map_blocks at ffffffff8121a5b7 #27 mpage_map_one_extent at ffffffff8121b1fa #28 mpage_map_and_submit_extent at ffffffff8121f07b #29 ext4_writepages at ffffffff8121f6d5 #30 do_writepages at ffffffff8112c490 #31 __filemap_fdatawrite_range at ffffffff81120199 #32 filemap_flush at ffffffff8112041c #33 ext4_alloc_da_blocks at ffffffff81219da1 #34 ext4_rename at ffffffff81229b91 #35 ext4_rename2 at ffffffff81229e32 #36 vfs_rename at ffffffff811a08a5 #37 SYSC_renameat2 at ffffffff811a3ffc #38 sys_renameat2 at ffffffff811a408e #39 sys_rename at ffffffff8119e51e #40 system_call_fastpath at ffffffff815afa89 Dave Chinner has properly pointed out that this is a deadlock in the reclaim code because ext4 doesn't submit pages which are marked by PG_writeback right away. The heuristic was introduced by commit e62e384 ("memcg: prevent OOM with too many dirty pages") and it was applied only when may_enter_fs was specified. The code has been changed by c3b94f4 ("memcg: further prevent OOM with too many dirty pages") which has removed the __GFP_FS restriction with a reasoning that we do not get into the fs code. But this is not sufficient apparently because the fs doesn't necessarily submit pages marked PG_writeback for IO right away. ext4_bio_write_page calls io_submit_add_bh but that doesn't necessarily submit the bio. Instead it tries to map more pages into the bio and mpage_map_one_extent might trigger memcg charge which might end up waiting on a page which is marked PG_writeback but hasn't been submitted yet so we would end up waiting for something that never finishes. Fix this issue by replacing __GFP_IO by may_enter_fs check (for case 2) before we go to wait on the writeback. The page fault path, which is the only path that triggers memcg oom killer since 3.12, shouldn't require GFP_NOFS and so we shouldn't reintroduce the premature OOM killer issue which was originally addressed by the heuristic. As per David Chinner the xfs is doing similar thing since 2.6.15 already so ext4 is not the only affected filesystem. Moreover he notes: : For example: IO completion might require unwritten extent conversion : which executes filesystem transactions and GFP_NOFS allocations. The : writeback flag on the pages can not be cleared until unwritten : extent conversion completes. Hence memory reclaim cannot wait on : page writeback to complete in GFP_NOFS context because it is not : safe to do so, memcg reclaim or otherwise. Cc: stable@vger.kernel.org # 3.9+ [tytso@mit.edu: corrected the control flow] Fixes: c3b94f4 ("memcg: further prevent OOM with too many dirty pages") Reported-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dabrace
pushed a commit
that referenced
this pull request
Aug 17, 2015
Bug: ------------[ cut here ]------------ kernel BUG at mm/huge_memory.c:1957! invalid opcode: 0000 [#1] SMP Modules linked in: snd_hda_codec_hdmi i915 rpcsec_gss_krb5 snd_hda_codec_realtek snd_hda_codec_generic nfsv4 dns_re CPU: 2 PID: 2576 Comm: test_huge Not tainted 4.2.0-rc5-mm1+ #27 Hardware name: Dell Inc. OptiPlex 7020/0F5C5X, BIOS A03 01/08/2015 task: ffff880204e3d600 ti: ffff8800db16c000 task.ti: ffff8800db16c000 RIP: split_huge_page_to_list+0xdb/0x120 Call Trace: memory_failure+0x32e/0x7c0 madvise_hwpoison+0x8b/0x160 SyS_madvise+0x40/0x240 ? do_page_fault+0x37/0x90 entry_SYSCALL_64_fastpath+0x12/0x71 Code: ff f0 41 ff 4c 24 30 74 0d 31 c0 48 83 c4 08 5b 41 5c 41 5d c9 c3 4c 89 e7 e8 e2 58 fd ff 48 83 c4 08 31 c0 RIP split_huge_page_to_list+0xdb/0x120 RSP <ffff8800db16fde8> ---[ end trace aee7ce0df8e44076 ]--- Testcase: #define _GNU_SOURCE #include <stdlib.h> #include <stdio.h> #include <sys/mman.h> #include <unistd.h> #include <fcntl.h> #include <sys/types.h> #include <errno.h> #include <string.h> #define MB 1024*1024 int main(void) { char *mem; posix_memalign((void **)&mem, 2 * MB, 200 * MB); madvise(mem, 200 * MB, MADV_HWPOISON); free(mem); return 0; } Huge zero page is allocated if page fault w/o FAULT_FLAG_WRITE flag. The get_user_pages_fast() which called in madvise_hwpoison() will get huge zero page if the page is not allocated before. Huge zero page is a tranparent huge page, however, it is not an anonymous page. memory_failure will split the huge zero page and trigger BUG_ON(is_huge_zero_page(page)); After commit 98ed2b0 ("mm/memory-failure: give up error handling for non-tail-refcounted thp"), memory_failure will not catch non anon thp from madvise_hwpoison path and this bug occur. Fix it by catching non anon thp in memory_failure in order to not split huge zero page in madvise_hwpoison path. After this patch: Injecting memory failure for page 0x202800 at 0x7fd8ae800000 MCE: 0x202800: non anonymous thp [...] [akpm@linux-foundation.org: remove second split, per Wanpeng] Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dabrace
pushed a commit
that referenced
this pull request
Nov 28, 2016
Split irqchip allows pic and ioapic routes to be used without them being created, which results in NULL access. Check for NULL and avoid it. (The setup is too racy for a nicer solutions.) Found by syzkaller: general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 3 PID: 11923 Comm: kworker/3:2 Not tainted 4.9.0-rc5+ #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: events irqfd_inject task: ffff88006a06c7c0 task.stack: ffff880068638000 RIP: 0010:[...] [...] __lock_acquire+0xb35/0x3380 kernel/locking/lockdep.c:3221 RSP: 0000:ffff88006863ea20 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: dffffc0000000000 RCX: 0000000000000000 RDX: 0000000000000039 RSI: 0000000000000000 RDI: 1ffff1000d0c7d9e RBP: ffff88006863ef58 R08: 0000000000000001 R09: 0000000000000000 R10: 00000000000001c8 R11: 0000000000000000 R12: ffff88006a06c7c0 R13: 0000000000000001 R14: ffffffff8baab1a0 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88006d100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004abdd0 CR3: 000000003e2f2000 CR4: 00000000000026e0 Stack: ffffffff894d0098 1ffff1000d0c7d56 ffff88006863ecd0 dffffc0000000000 ffff88006a06c7c0 0000000000000000 ffff88006863ecf8 0000000000000082 0000000000000000 ffffffff815dd7c1 ffffffff00000000 ffffffff00000000 Call Trace: [...] lock_acquire+0x2a2/0x790 kernel/locking/lockdep.c:3746 [...] __raw_spin_lock include/linux/spinlock_api_smp.h:144 [...] _raw_spin_lock+0x38/0x50 kernel/locking/spinlock.c:151 [...] spin_lock include/linux/spinlock.h:302 [...] kvm_ioapic_set_irq+0x4c/0x100 arch/x86/kvm/ioapic.c:379 [...] kvm_set_ioapic_irq+0x8f/0xc0 arch/x86/kvm/irq_comm.c:52 [...] kvm_set_irq+0x239/0x640 arch/x86/kvm/../../../virt/kvm/irqchip.c:101 [...] irqfd_inject+0xb4/0x150 arch/x86/kvm/../../../virt/kvm/eventfd.c:60 [...] process_one_work+0xb40/0x1ba0 kernel/workqueue.c:2096 [...] worker_thread+0x214/0x18a0 kernel/workqueue.c:2230 [...] kthread+0x328/0x3e0 kernel/kthread.c:209 [...] ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:433 Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: stable@vger.kernel.org Fixes: 49df639 ("KVM: x86: Split the APIC from the rest of IRQCHIP.") Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
dabrace
pushed a commit
that referenced
this pull request
Feb 3, 2017
Reviewed-by: Jeff Layton <jlayton@redhat.com> CC: Stable <stable@vger.kernel.org> file_info_lock is not initalized in initiate_cifs_search(), leading to the following splat after a simple "mount.cifs ... dir && ls dir/": BUG: spinlock bad magic on CPU#0, ls/486 lock: 0xffff880009301110, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 0 PID: 486 Comm: ls Not tainted 4.9.0 #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ffffc900042f3db0 ffffffff81327533 0000000000000000 ffff880009301110 ffffc900042f3dd0 ffffffff810baf75 ffff880009301110 ffffffff817ae077 ffffc900042f3df0 ffffffff810baff6 ffff880009301110 ffff880008d69900 Call Trace: [<ffffffff81327533>] dump_stack+0x65/0x92 [<ffffffff810baf75>] spin_dump+0x85/0xe0 [<ffffffff810baff6>] spin_bug+0x26/0x30 [<ffffffff810bb159>] do_raw_spin_lock+0xe9/0x130 [<ffffffff8159ad2f>] _raw_spin_lock+0x1f/0x30 [<ffffffff8127e50d>] cifs_closedir+0x4d/0x100 [<ffffffff81181cfd>] __fput+0x5d/0x160 [<ffffffff81181e3e>] ____fput+0xe/0x10 [<ffffffff8109410e>] task_work_run+0x7e/0xa0 [<ffffffff81002512>] exit_to_usermode_loop+0x92/0xa0 [<ffffffff810026f9>] syscall_return_slowpath+0x49/0x50 [<ffffffff8159b484>] entry_SYSCALL_64_fastpath+0xa7/0xa9 Fixes: 3afca26 ("Clarify locking of cifs file and tcon structures and make more granular") Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Steve French <smfrench@gmail.com>
dabrace
pushed a commit
that referenced
this pull request
Mar 23, 2018
Add a check for the length of the qpin structure to prevent out-of-bounds reads BUG: KASAN: slab-out-of-bounds in create_raw_packet_qp+0x114c/0x15e2 Read of size 8192 at addr ffff880066b99290 by task syz-executor3/549 CPU: 3 PID: 549 Comm: syz-executor3 Not tainted 4.15.0-rc2+ #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0x8d/0xd4 print_address_description+0x73/0x290 kasan_report+0x25c/0x370 ? create_raw_packet_qp+0x114c/0x15e2 memcpy+0x1f/0x50 create_raw_packet_qp+0x114c/0x15e2 ? create_raw_packet_qp_tis.isra.28+0x13d/0x13d ? lock_acquire+0x370/0x370 create_qp_common+0x2245/0x3b50 ? destroy_qp_user.isra.47+0x100/0x100 ? kasan_kmalloc+0x13d/0x170 ? sched_clock_cpu+0x18/0x180 ? fs_reclaim_acquire.part.15+0x5/0x30 ? __lock_acquire+0xa11/0x1da0 ? sched_clock_cpu+0x18/0x180 ? kmem_cache_alloc_trace+0x17e/0x310 ? mlx5_ib_create_qp+0x30e/0x17b0 mlx5_ib_create_qp+0x33d/0x17b0 ? sched_clock_cpu+0x18/0x180 ? create_qp_common+0x3b50/0x3b50 ? lock_acquire+0x370/0x370 ? __radix_tree_lookup+0x180/0x220 ? uverbs_try_lock_object+0x68/0xc0 ? rdma_lookup_get_uobject+0x114/0x240 create_qp.isra.5+0xce4/0x1e20 ? ib_uverbs_ex_create_cq_cb+0xa0/0xa0 ? copy_ah_attr_from_uverbs.isra.2+0xa00/0xa00 ? ib_uverbs_cq_event_handler+0x160/0x160 ? __might_fault+0x17c/0x1c0 ib_uverbs_create_qp+0x21b/0x2a0 ? ib_uverbs_destroy_cq+0x2e0/0x2e0 ib_uverbs_write+0x55a/0xad0 ? ib_uverbs_destroy_cq+0x2e0/0x2e0 ? ib_uverbs_destroy_cq+0x2e0/0x2e0 ? ib_uverbs_open+0x760/0x760 ? futex_wake+0x147/0x410 ? check_prev_add+0x1680/0x1680 ? do_futex+0x3d3/0xa60 ? sched_clock_cpu+0x18/0x180 __vfs_write+0xf7/0x5c0 ? ib_uverbs_open+0x760/0x760 ? kernel_read+0x110/0x110 ? lock_acquire+0x370/0x370 ? __fget+0x264/0x3b0 vfs_write+0x18a/0x460 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x18/0x85 RIP: 0033:0x4477b9 RSP: 002b:00007f1822cadc18 EFLAGS: 00000292 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00000000004477b9 RDX: 0000000000000070 RSI: 000000002000a000 RDI: 0000000000000005 RBP: 0000000000708000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000292 R12: 00000000ffffffff R13: 0000000000005d70 R14: 00000000006e6e30 R15: 0000000020010ff0 Allocated by task 549: __kmalloc+0x15e/0x340 kvmalloc_node+0xa1/0xd0 create_user_qp.isra.46+0xd42/0x1610 create_qp_common+0x2e63/0x3b50 mlx5_ib_create_qp+0x33d/0x17b0 create_qp.isra.5+0xce4/0x1e20 ib_uverbs_create_qp+0x21b/0x2a0 ib_uverbs_write+0x55a/0xad0 __vfs_write+0xf7/0x5c0 vfs_write+0x18a/0x460 SyS_write+0xc7/0x1a0 entry_SYSCALL_64_fastpath+0x18/0x85 Freed by task 368: kfree+0xeb/0x2f0 kernfs_fop_release+0x140/0x180 __fput+0x266/0x700 task_work_run+0x104/0x180 exit_to_usermode_loop+0xf7/0x110 syscall_return_slowpath+0x298/0x370 entry_SYSCALL_64_fastpath+0x83/0x85 The buggy address belongs to the object at ffff880066b99180 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 272 bytes inside of 512-byte region [ffff880066b99180, ffff880066b99380) The buggy address belongs to the page: page:000000006040eedd count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x4000000000008100(slab|head) raw: 4000000000008100 0000000000000000 0000000000000000 0000000180190019 raw: ffffea00019a7500 0000000b0000000b ffff88006c403080 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880066b99180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880066b99200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff880066b99280: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff880066b99300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff880066b99380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Cc: syzkaller <syzkaller@googlegroups.com> Fixes: 0fb2ed6 ("IB/mlx5: Add create and destroy functionality for Raw Packet QP") Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
dabrace
pushed a commit
that referenced
this pull request
May 21, 2018
syzbot caught an infinite recursion in nsh_gso_segment().
Problem here is that we need to make sure the NSH header is of
reasonable length.
BUG: MAX_LOCK_DEPTH too low!
turning off the locking correctness validator.
depth: 48 max: 48!
48 locks held by syz-executor0/10189:
#0: (ptrval) (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x30f/0x34c0 net/core/dev.c:3517
#1: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#1: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#2: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#2: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#3: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#3: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#4: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#4: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#5: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#5: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#6: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#6: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#7: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#7: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#8: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#8: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#9: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#9: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#10: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#10: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#11: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#11: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#12: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#12: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#13: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#13: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#14: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#14: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#15: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#15: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#16: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#16: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#17: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#17: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#18: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#18: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#19: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#19: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#20: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#20: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#21: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#21: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#22: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#22: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#23: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#23: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#24: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#24: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#25: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#25: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#26: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#26: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#27: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#27: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#28: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#28: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#29: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#29: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#30: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#30: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#31: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#31: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
dccp_close: ABORT with 65423 bytes unread
#32: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#32: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#33: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#33: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#34: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#34: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#35: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#35: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#36: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#36: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#37: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#37: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#38: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#38: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#39: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#39: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#40: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#40: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#41: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#41: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#42: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#42: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#43: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#43: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#44: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#44: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#45: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#45: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#46: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#46: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#47: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#47: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
INFO: lockdep is turned off.
CPU: 1 PID: 10189 Comm: syz-executor0 Not tainted 4.17.0-rc2+ #26
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1b9/0x294 lib/dump_stack.c:113
__lock_acquire+0x1788/0x5140 kernel/locking/lockdep.c:3449
lock_acquire+0x1dc/0x520 kernel/locking/lockdep.c:3920
rcu_lock_acquire include/linux/rcupdate.h:246 [inline]
rcu_read_lock include/linux/rcupdate.h:632 [inline]
skb_mac_gso_segment+0x25b/0x720 net/core/dev.c:2789
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
__skb_gso_segment+0x3bb/0x870 net/core/dev.c:2865
skb_gso_segment include/linux/netdevice.h:4025 [inline]
validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3118
validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3168
sch_direct_xmit+0x354/0x11e0 net/sched/sch_generic.c:312
qdisc_restart net/sched/sch_generic.c:399 [inline]
__qdisc_run+0x741/0x1af0 net/sched/sch_generic.c:410
__dev_xmit_skb net/core/dev.c:3243 [inline]
__dev_queue_xmit+0x28ea/0x34c0 net/core/dev.c:3551
dev_queue_xmit+0x17/0x20 net/core/dev.c:3616
packet_snd net/packet/af_packet.c:2951 [inline]
packet_sendmsg+0x40f8/0x6070 net/packet/af_packet.c:2976
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:639
__sys_sendto+0x3d7/0x670 net/socket.c:1789
__do_sys_sendto net/socket.c:1801 [inline]
__se_sys_sendto net/socket.c:1797 [inline]
__x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797
do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: c411ed8 ("nsh: add GSO support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Benc <jbenc@redhat.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dabrace
pushed a commit
that referenced
this pull request
Jun 22, 2018
lockdep spotted that we are using rfs_h.lock in enic_get_rxnfc() without initializing. rfs_h.lock is initialized in enic_open(). But ethtool_ops can be called when interface is down. Move enic_rfs_flw_tbl_init to enic_probe. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 18 PID: 1189 Comm: ethtool Not tainted 4.17.0-rc7-devel+ #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 Call Trace: dump_stack+0x85/0xc0 register_lock_class+0x550/0x560 ? __handle_mm_fault+0xa8b/0x1100 __lock_acquire+0x81/0x670 lock_acquire+0xb9/0x1e0 ? enic_get_rxnfc+0x139/0x2b0 [enic] _raw_spin_lock_bh+0x38/0x80 ? enic_get_rxnfc+0x139/0x2b0 [enic] enic_get_rxnfc+0x139/0x2b0 [enic] ethtool_get_rxnfc+0x8d/0x1c0 dev_ethtool+0x16c8/0x2400 ? __mutex_lock+0x64d/0xa00 ? dev_load+0x6a/0x150 dev_ioctl+0x253/0x4b0 sock_do_ioctl+0x9a/0x130 sock_ioctl+0x1af/0x350 do_vfs_ioctl+0x8e/0x670 ? syscall_trace_enter+0x1e2/0x380 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5a/0x170 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
dabrace
pushed a commit
that referenced
this pull request
Jun 26, 2018
…_neon_begin, _end
In a arm64 server(QDF2400),I met a similar might-sleep warning as [1]:
[ 7.019116] BUG: sleeping function called from invalid context at
./include/crypto/algapi.h:416
[ 7.027863] in_atomic(): 1, irqs_disabled(): 0, pid: 410, name:
cryptomgr_test
[ 7.035106] 1 lock held by cryptomgr_test/410:
[ 7.039549] #0: (ptrval) (&drbg->drbg_mutex){+.+.}, at:
drbg_instantiate+0x34/0x398
[ 7.048038] CPU: 9 PID: 410 Comm: cryptomgr_test Not tainted
4.17.0-rc6+ #27
[ 7.068228] dump_backtrace+0x0/0x1c0
[ 7.071890] show_stack+0x24/0x30
[ 7.075208] dump_stack+0xb0/0xec
[ 7.078523] ___might_sleep+0x160/0x238
[ 7.082360] skcipher_walk_done+0x118/0x2c8
[ 7.086545] ctr_encrypt+0x98/0x130
[ 7.090035] simd_skcipher_encrypt+0x68/0xc0
[ 7.094304] drbg_kcapi_sym_ctr+0xd4/0x1f8
[ 7.098400] drbg_ctr_update+0x98/0x330
[ 7.102236] drbg_seed+0x1b8/0x2f0
[ 7.105637] drbg_instantiate+0x2ac/0x398
[ 7.109646] drbg_kcapi_seed+0xbc/0x188
[ 7.113482] crypto_rng_reset+0x4c/0xb0
[ 7.117319] alg_test_drbg+0xec/0x330
[ 7.120981] alg_test.part.6+0x1c8/0x3c8
[ 7.124903] alg_test+0x58/0xa0
[ 7.128044] cryptomgr_test+0x50/0x58
[ 7.131708] kthread+0x134/0x138
[ 7.134936] ret_from_fork+0x10/0x1c
Seems there is a bug in Ard Biesheuvel's commit.
Fixes: 6833817 ("crypto: arm64/aes-blk - move kernel mode neon
en/disable into loop")
[1] https://www.spinics.net/lists/linux-crypto/msg33103.html
Signed-off-by: jia.he@hxt-semitech.com
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org> # 4.17
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
dabrace
pushed a commit
that referenced
this pull request
Jul 24, 2018
Crash dump shows following instructions crash> bt PID: 0 TASK: ffffffffbe412480 CPU: 0 COMMAND: "swapper/0" #0 [ffff891ee0003868] machine_kexec at ffffffffbd063ef1 #1 [ffff891ee00038c8] __crash_kexec at ffffffffbd12b6f2 #2 [ffff891ee0003998] crash_kexec at ffffffffbd12c84c #3 [ffff891ee00039b8] oops_end at ffffffffbd030f0a #4 [ffff891ee00039e0] no_context at ffffffffbd074643 #5 [ffff891ee0003a40] __bad_area_nosemaphore at ffffffffbd07496e #6 [ffff891ee0003a90] bad_area_nosemaphore at ffffffffbd074a64 #7 [ffff891ee0003aa0] __do_page_fault at ffffffffbd074b0a #8 [ffff891ee0003b18] do_page_fault at ffffffffbd074fc8 #9 [ffff891ee0003b50] page_fault at ffffffffbda01925 [exception RIP: qlt_schedule_sess_for_deletion+15] RIP: ffffffffc02e526f RSP: ffff891ee0003c08 RFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffc0307847 RDX: 00000000000020e6 RSI: ffff891edbc377c8 RDI: 0000000000000000 RBP: ffff891ee0003c18 R8: ffffffffc02f0b20 R9: 0000000000000250 R10: 0000000000000258 R11: 000000000000b780 R12: ffff891ed9b43000 R13: 00000000000000f0 R14: 0000000000000006 R15: ffff891edbc377c8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff891ee0003c20] qla2x00_fcport_event_handler at ffffffffc02853d3 [qla2xxx] #11 [ffff891ee0003cf0] __dta_qla24xx_async_gnl_sp_done_333 at ffffffffc0285a1d [qla2xxx] #12 [ffff891ee0003de8] qla24xx_process_response_queue at ffffffffc02a2eb5 [qla2xxx] #13 [ffff891ee0003e88] qla24xx_msix_rsp_q at ffffffffc02a5403 [qla2xxx] #14 [ffff891ee0003ec0] __handle_irq_event_percpu at ffffffffbd0f4c59 #15 [ffff891ee0003f10] handle_irq_event_percpu at ffffffffbd0f4e02 #16 [ffff891ee0003f40] handle_irq_event at ffffffffbd0f4e90 #17 [ffff891ee0003f68] handle_edge_irq at ffffffffbd0f8984 #18 [ffff891ee0003f88] handle_irq at ffffffffbd0305d5 #19 [ffff891ee0003fb8] do_IRQ at ffffffffbda02a18 --- <IRQ stack> --- #20 [ffffffffbe403d30] ret_from_intr at ffffffffbda0094e [exception RIP: unknown or invalid address] RIP: 000000000000001f RSP: 0000000000000000 RFLAGS: fff3b8c2091ebb3f RAX: ffffbba5a0000200 RBX: 0000be8cdfa8f9fa RCX: 0000000000000018 RDX: 0000000000000101 RSI: 000000000000015d RDI: 0000000000000193 RBP: 0000000000000083 R8: ffffffffbe403e38 R9: 0000000000000002 R10: 0000000000000000 R11: ffffffffbe56b820 R12: ffff891ee001cf00 R13: ffffffffbd11c0a4 R14: ffffffffbe403d60 R15: 0000000000000001 ORIG_RAX: ffff891ee0022ac0 CS: 0000 SS: ffffffffffffffb9 bt: WARNING: possibly bogus exception frame #21 [ffffffffbe403dd8] cpuidle_enter_state at ffffffffbd67c6fd #22 [ffffffffbe403e40] cpuidle_enter at ffffffffbd67c907 #23 [ffffffffbe403e50] call_cpuidle at ffffffffbd0d98f3 #24 [ffffffffbe403e60] do_idle at ffffffffbd0d9b42 #25 [ffffffffbe403e98] cpu_startup_entry at ffffffffbd0d9da3 #26 [ffffffffbe403ec0] rest_init at ffffffffbd81d4aa #27 [ffffffffbe403ed0] start_kernel at ffffffffbe67d2ca #28 [ffffffffbe403f28] x86_64_start_reservations at ffffffffbe67c675 #29 [ffffffffbe403f38] x86_64_start_kernel at ffffffffbe67c6eb #30 [ffffffffbe403f50] secondary_startup_64 at ffffffffbd0000d5 Fixes: 040036b ("scsi: qla2xxx: Delay loop id allocation at login") Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
dabrace
pushed a commit
that referenced
this pull request
Nov 12, 2018
Increase kasan instrumented kernel stack size from 32k to 64k. Other architectures seems to get away with just doubling kernel stack size under kasan, but on s390 this appears to be not enough due to bigger frame size. The particular pain point is kasan inlined checks (CONFIG_KASAN_INLINE vs CONFIG_KASAN_OUTLINE). With inlined checks one particular case hitting stack overflow is fs sync on xfs filesystem: #0 [9a0681e8] 704 bytes check_usage at 34b1fc #1 [9a0684a8] 432 bytes check_usage at 34c710 #2 [9a068658] 1048 bytes validate_chain at 35044a #3 [9a068a70] 312 bytes __lock_acquire at 3559fe #4 [9a068ba8] 440 bytes lock_acquire at 3576ee #5 [9a068d60] 104 bytes _raw_spin_lock at 21b44e0 #6 [9a068dc8] 1992 bytes enqueue_entity at 2dbf72 #7 [9a069590] 1496 bytes enqueue_task_fair at 2df5f0 #8 [9a069b68] 64 bytes ttwu_do_activate at 28f438 #9 [9a069ba8] 552 bytes try_to_wake_up at 298c4c #10 [9a069dd0] 168 bytes wake_up_worker at 23f97c #11 [9a069e78] 200 bytes insert_work at 23fc2e #12 [9a069f40] 648 bytes __queue_work at 2487c0 #13 [9a06a1c8] 200 bytes __queue_delayed_work at 24db28 #14 [9a06a290] 248 bytes mod_delayed_work_on at 24de84 #15 [9a06a388] 24 bytes kblockd_mod_delayed_work_on at 153e2a0 #16 [9a06a3a0] 288 bytes __blk_mq_delay_run_hw_queue at 158168c #17 [9a06a4c0] 192 bytes blk_mq_run_hw_queue at 1581a3c #18 [9a06a580] 184 bytes blk_mq_sched_insert_requests at 15a2192 #19 [9a06a638] 1024 bytes blk_mq_flush_plug_list at 1590f3a #20 [9a06aa38] 704 bytes blk_flush_plug_list at 1555028 #21 [9a06acf8] 320 bytes schedule at 219e476 #22 [9a06ae38] 760 bytes schedule_timeout at 21b0aac #23 [9a06b130] 408 bytes wait_for_common at 21a1706 #24 [9a06b2c8] 360 bytes xfs_buf_iowait at fa1540 #25 [9a06b430] 256 bytes __xfs_buf_submit at fadae6 #26 [9a06b530] 264 bytes xfs_buf_read_map at fae3f6 #27 [9a06b638] 656 bytes xfs_trans_read_buf_map at 10ac9a8 #28 [9a06b8c8] 304 bytes xfs_btree_kill_root at e72426 #29 [9a06b9f8] 288 bytes xfs_btree_lookup_get_block at e7bc5e #30 [9a06bb18] 624 bytes xfs_btree_lookup at e7e1a6 #31 [9a06bd88] 2664 bytes xfs_alloc_ag_vextent_near at dfa070 #32 [9a06c7f0] 144 bytes xfs_alloc_ag_vextent at dff3ca #33 [9a06c880] 1128 bytes xfs_alloc_vextent at e05fce #34 [9a06cce8] 584 bytes xfs_bmap_btalloc at e58342 #35 [9a06cf30] 1336 bytes xfs_bmapi_write at e618de #36 [9a06d468] 776 bytes xfs_iomap_write_allocate at ff678e #37 [9a06d770] 720 bytes xfs_map_blocks at f82af8 #38 [9a06da40] 928 bytes xfs_writepage_map at f83cd6 #39 [9a06dde0] 320 bytes xfs_do_writepage at f85872 #40 [9a06df20] 1320 bytes write_cache_pages at 73dfe8 #41 [9a06e448] 208 bytes xfs_vm_writepages at f7f892 #42 [9a06e518] 88 bytes do_writepages at 73fe6a #43 [9a06e570] 872 bytes __writeback_single_inode at a20cb6 #44 [9a06e8d8] 664 bytes writeback_sb_inodes at a23be2 #45 [9a06eb70] 296 bytes __writeback_inodes_wb at a242e0 #46 [9a06ec98] 928 bytes wb_writeback at a2500e #47 [9a06f038] 848 bytes wb_do_writeback at a260ae #48 [9a06f388] 536 bytes wb_workfn at a28228 #49 [9a06f5a0] 1088 bytes process_one_work at 24a234 #50 [9a06f9e0] 1120 bytes worker_thread at 24ba26 #51 [9a06fe40] 104 bytes kthread at 26545a #52 [9a06fea8] kernel_thread_starter at 21b6b62 To be able to increase the stack size to 64k reuse LLILL instruction in __switch_to function to load 64k - STACK_FRAME_OVERHEAD - __PT_SIZE (65192) value as unsigned. Reported-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
dabrace
pushed a commit
that referenced
this pull request
Dec 3, 2018
There is a reference counter to ensure that masquerade modules register
notifiers only once. However, the existing reference counter approach is
not safe, test commands are:
while :
do
modprobe ip6t_MASQUERADE &
modprobe nft_masq_ipv6 &
modprobe -rv ip6t_MASQUERADE &
modprobe -rv nft_masq_ipv6 &
done
numbers below represent the reference counter.
--------------------------------------------------------
CPU0 CPU1 CPU2 CPU3 CPU4
[insmod] [insmod] [rmmod] [rmmod] [insmod]
--------------------------------------------------------
0->1
register 1->2
returns 2->1
returns 1->0
0->1
register <--
unregister
--------------------------------------------------------
The unregistation of CPU3 should be processed before the
registration of CPU4.
In order to fix this, use a mutex instead of reference counter.
splat looks like:
[ 323.869557] watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [modprobe:1381]
[ 323.869574] Modules linked in: nf_tables(+) nf_nat_ipv6(-) nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 n]
[ 323.869574] irq event stamp: 194074
[ 323.898930] hardirqs last enabled at (194073): [<ffffffff90004a0d>] trace_hardirqs_on_thunk+0x1a/0x1c
[ 323.898930] hardirqs last disabled at (194074): [<ffffffff90004a29>] trace_hardirqs_off_thunk+0x1a/0x1c
[ 323.898930] softirqs last enabled at (182132): [<ffffffff922006ec>] __do_softirq+0x6ec/0xa3b
[ 323.898930] softirqs last disabled at (182109): [<ffffffff90193426>] irq_exit+0x1a6/0x1e0
[ 323.898930] CPU: 0 PID: 1381 Comm: modprobe Not tainted 4.20.0-rc2+ #27
[ 323.898930] RIP: 0010:raw_notifier_chain_register+0xea/0x240
[ 323.898930] Code: 3c 03 0f 8e f2 00 00 00 44 3b 6b 10 7f 4d 49 bc 00 00 00 00 00 fc ff df eb 22 48 8d 7b 10 488
[ 323.898930] RSP: 0018:ffff888101597218 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
[ 323.898930] RAX: 0000000000000000 RBX: ffffffffc04361c0 RCX: 0000000000000000
[ 323.898930] RDX: 1ffffffff26132ae RSI: ffffffffc04aa3c0 RDI: ffffffffc04361d0
[ 323.898930] RBP: ffffffffc04361c8 R08: 0000000000000000 R09: 0000000000000001
[ 323.898930] R10: ffff8881015972b0 R11: fffffbfff26132c4 R12: dffffc0000000000
[ 323.898930] R13: 0000000000000000 R14: 1ffff110202b2e44 R15: ffffffffc04aa3c0
[ 323.898930] FS: 00007f813ed41540(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000
[ 323.898930] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 323.898930] CR2: 0000559bf2c9f120 CR3: 000000010bc80000 CR4: 00000000001006f0
[ 323.898930] Call Trace:
[ 323.898930] ? atomic_notifier_chain_register+0x2d0/0x2d0
[ 323.898930] ? down_read+0x150/0x150
[ 323.898930] ? sched_clock_cpu+0x126/0x170
[ 323.898930] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables]
[ 323.898930] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables]
[ 323.898930] register_netdevice_notifier+0xbb/0x790
[ 323.898930] ? __dev_close_many+0x2d0/0x2d0
[ 323.898930] ? __mutex_unlock_slowpath+0x17f/0x740
[ 323.898930] ? wait_for_completion+0x710/0x710
[ 323.898930] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables]
[ 323.898930] ? up_write+0x6c/0x210
[ 323.898930] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables]
[ 324.127073] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables]
[ 324.127073] nft_chain_filter_init+0x1e/0xe8a [nf_tables]
[ 324.127073] nf_tables_module_init+0x37/0x92 [nf_tables]
[ ... ]
Fixes: 8dd33cc ("netfilter: nf_nat: generalize IPv4 masquerading support for nf_tables")
Fixes: be6b635 ("netfilter: nf_nat: generalize IPv6 masquerading support for nf_tables")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
dabrace
pushed a commit
that referenced
this pull request
Feb 8, 2019
This is the same sort of error we saw in commit 17e2e7d ("mm, page_alloc: fix has_unmovable_pages for HugePages"). Gigantic hugepages cross several memblocks, so it can be that the page we get in scan_movable_pages() is a page-tail belonging to a 1G-hugepage. If that happens, page_hstate()->size_to_hstate() will return NULL, and we will blow up in hugepage_migration_supported(). The splat is as follows: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 #PF error: [normal kernel read fault] PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 1 PID: 1350 Comm: bash Tainted: G E 5.0.0-rc1-mm1-1-default+ #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__offline_pages+0x6ae/0x900 Call Trace: memory_subsys_offline+0x42/0x60 device_offline+0x80/0xa0 state_store+0xab/0xc0 kernfs_fop_write+0x102/0x180 __vfs_write+0x26/0x190 vfs_write+0xad/0x1b0 ksys_write+0x42/0x90 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Modules linked in: af_packet(E) xt_tcpudp(E) ipt_REJECT(E) xt_conntrack(E) nf_conntrack(E) nf_defrag_ipv4(E) ip_set(E) nfnetlink(E) ebtable_nat(E) ebtable_broute(E) bridge(E) stp(E) llc(E) iptable_mangle(E) iptable_raw(E) iptable_security(E) ebtable_filter(E) ebtables(E) iptable_filter(E) ip_tables(E) x_tables(E) kvm_intel(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) ghash_clmulni_intel(E) bochs_drm(E) ttm(E) aesni_intel(E) drm_kms_helper(E) aes_x86_64(E) crypto_simd(E) cryptd(E) glue_helper(E) drm(E) virtio_net(E) syscopyarea(E) sysfillrect(E) net_failover(E) sysimgblt(E) pcspkr(E) failover(E) i2c_piix4(E) fb_sys_fops(E) parport_pc(E) parport(E) button(E) btrfs(E) libcrc32c(E) xor(E) zstd_decompress(E) zstd_compress(E) xxhash(E) raid6_pq(E) sd_mod(E) ata_generic(E) ata_piix(E) ahci(E) libahci(E) libata(E) crc32c_intel(E) serio_raw(E) virtio_pci(E) virtio_ring(E) virtio(E) sg(E) scsi_mod(E) autofs4(E) [akpm@linux-foundation.org: fix brace layout, per David. Reduce indentation] Link: http://lkml.kernel.org/r/20190122154407.18417-1-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dabrace
pushed a commit
that referenced
this pull request
May 14, 2019
In virtualized setup, when system reboots due to warm reset interrupt storm is seen. Call Trace: <IRQ> dump_stack+0x70/0xa5 __report_bad_irq+0x2e/0xc0 note_interrupt+0x248/0x290 ? add_interrupt_randomness+0x30/0x220 handle_irq_event_percpu+0x54/0x80 handle_irq_event+0x39/0x60 handle_fasteoi_irq+0x91/0x150 handle_irq+0x108/0x180 do_IRQ+0x52/0xf0 common_interrupt+0xf/0xf </IRQ> RIP: 0033:0x76fc2cfabc1d Code: 24 28 bf 03 00 00 00 31 c0 48 8d 35 63 77 0e 00 48 8d 15 2e 94 0e 00 4c 89 f9 49 89 d9 4c 89 d3 e8 b8 e2 01 00 48 8b 54 24 18 <48> 89 ef 48 89 de 4c 89 e1 e8 d5 97 01 00 84 c0 74 2d 48 8b 04 24 RSP: 002b:00007ffd247c1fc0 EFLAGS: 00000293 ORIG_RAX: ffffffffffffffda RAX: 0000000000000000 RBX: 00007ffd247c1ff0 RCX: 000000000003d3ce RDX: 0000000000000000 RSI: 00007ffd247c1ff0 RDI: 000076fc2cbb6010 RBP: 000076fc2cded010 R08: 00007ffd247c2210 R09: 00007ffd247c22a0 R10: 000076fc29465470 R11: 0000000000000000 R12: 00007ffd247c1fc0 R13: 000076fc2ce8e470 R14: 000076fc27ec9960 R15: 0000000000000414 handlers: [<000000000d3fa913>] idma64_irq Disabling IRQ #27 To avoid interrupt storm, set the device in reset state before bringing out the device from reset state. Changelog v2: - correct the subject line by adding "mfd: " Signed-off-by: Binbin Wu <binbin.wu@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
dabrace
pushed a commit
that referenced
this pull request
Aug 24, 2020
Recently nvme_dev.q_depth was changed from an int to u16 type. This falls over for the queue depth calculation in nvme_pci_enable(), where NVME_CAP_MQES(dev->ctrl.cap) + 1 may overflow as a u16, as NVME_CAP_MQES() is a 16b number also. That happens for me, and this is the result: root@ubuntu:/home/john# [148.272996] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000a27bf3c9000 [0000000000000010] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: nvme nvme_core CPU: 56 PID: 256 Comm: kworker/u195:0 Not tainted 5.8.0-next-20200812 #27 Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019 Workqueue: nvme-reset-wq nvme_reset_work [nvme] pstate: 80c00009 (Nzcv daif +PAN +UAO BTYPE=--) pc : __sg_alloc_table_from_pages+0xec/0x238 lr : __sg_alloc_table_from_pages+0xc8/0x238 sp : ffff800013ccbad0 x29: ffff800013ccbad0 x28: ffff0a27b3d380a8 x27: 0000000000000000 x26: 0000000000002dc2 x25: 0000000000000dc0 x24: 0000000000000000 x23: 0000000000000000 x22: ffff800013ccbbe8 x21: 0000000000000010 x20: 0000000000000000 x19: 00000000fffff000 x18: ffffffffffffffff x17: 00000000000000c0 x16: fffffe289eaf6380 x15: ffff800011b59948 x14: ffff002bc8fe98f8 x13: ff00000000000000 x12: ffff8000114ca000 x11: 0000000000000000 x10: ffffffffffffffff x9 : ffffffffffffffc0 x8 : ffff0a27b5f9b6a0 x7 : 0000000000000000 x6 : 0000000000000001 x5 : ffff0a27b5f9b680 x4 : 0000000000000000 x3 : ffff0a27b5f9b680 x2 : 0000000000000000 x1 : 0000000000000001 x0 : 0000000000000000 Call trace: __sg_alloc_table_from_pages+0xec/0x238 sg_alloc_table_from_pages+0x18/0x28 iommu_dma_alloc+0x474/0x678 dma_alloc_attrs+0xd8/0xf0 nvme_alloc_queue+0x114/0x160 [nvme] nvme_reset_work+0xb34/0x14b4 [nvme] process_one_work+0x1e8/0x360 worker_thread+0x44/0x478 kthread+0x150/0x158 ret_from_fork+0x10/0x34 Code: f94002c3 6b01017f 540007c2 11000486 (f8645aa5) ---[ end trace 89bb2b72d59bf925 ]--- Fix by making onto a u32. Also use u32 for nvme_dev.q_depth, as we assign this value from nvme_dev.q_depth, and nvme_dev.q_depth will possibly hold 65536 - this avoids the same crash as above. Fixes: 61f3b89 ("nvme-pci: use unsigned for io queue depth") Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
dabrace
pushed a commit
that referenced
this pull request
May 6, 2021
Ritesh reported a bug [1] against UML, noting that it crashed on startup. The backtrace shows the following (heavily redacted): (gdb) bt ... #26 0x0000000060015b5d in sem_init () at ipc/sem.c:268 #27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2 #28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72 ... #40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359 ... #44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486 #45 0x00007f8990968b85 in __getgrnam_r [...] #46 0x00007f89909d6b77 in grantpt [...] #47 0x00007f8990a9394e in __GI_openpty [...] #48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407 #49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598 #50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45 #51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334 #52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144 indicating that the UML function openpty_cb() calls openpty(), which internally calls __getgrnam_r(), which causes the nsswitch machinery to get started. This loads, through lots of indirection that I snipped, the libcom_err.so.2 library, which (in an unknown function, "??") calls sem_init(). Now, of course it wants to get libpthread's sem_init(), since it's linked against libpthread. However, the dynamic linker looks up that symbol against the binary first, and gets the kernel's sem_init(). Hajime Tazaki noted that "objcopy -L" can localize a symbol, so the dynamic linker wouldn't do the lookup this way. I tried, but for some reason that didn't seem to work. Doing the same thing in the linker script instead does seem to work, though I cannot entirely explain - it *also* works if I just add "VERSION { { global: *; }; }" instead, indicating that something else is happening that I don't really understand. It may be that explicitly doing that marks them with some kind of empty version, and that's different from the default. Explicitly marking them with a version breaks kallsyms, so that doesn't seem to be possible. Marking all the symbols as local seems correct, and does seem to address the issue, so do that. Also do it for static link, nsswitch libraries could still be loaded there. [1] https://bugs.debian.org/983379 Reported-by: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Tested-By: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Richard Weinberger <richard@nod.at>
dabrace
pushed a commit
that referenced
this pull request
Mar 17, 2022
high_memory used to be initialized in mem_init, way after setup_bootmem. But a call to dma_contiguous_reserve in this function gives rise to the below warning because high_memory is equal to 0 and is used at the very beginning at cma_declare_contiguous_nid. It went unnoticed since the move of the kasan region redefined KERN_VIRT_SIZE so that it does not encompass -1 anymore. Fix this by initializing high_memory in setup_bootmem. ------------[ cut here ]------------ virt_to_phys used for non-linear address: ffffffffffffffff (0xffffffffffffffff) WARNING: CPU: 0 PID: 0 at arch/riscv/mm/physaddr.c:14 __virt_to_phys+0xac/0x1b8 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.17.0-rc1-00007-ga68b89289e26 #27 Hardware name: riscv-virtio,qemu (DT) epc : __virt_to_phys+0xac/0x1b8 ra : __virt_to_phys+0xac/0x1b8 epc : ffffffff80014922 ra : ffffffff80014922 sp : ffffffff84a03c30 gp : ffffffff85866c80 tp : ffffffff84a3f180 t0 : ffffffff86bce657 t1 : fffffffef09406e8 t2 : 0000000000000000 s0 : ffffffff84a03c70 s1 : ffffffffffffffff a0 : 000000000000004f a1 : 00000000000f0000 a2 : 0000000000000002 a3 : ffffffff8011f408 a4 : 0000000000000000 a5 : 0000000000000000 a6 : 0000000000f00000 a7 : ffffffff84a03747 s2 : ffffffd800000000 s3 : ffffffff86ef4000 s4 : ffffffff8467f828 s5 : fffffff800000000 s6 : 8000000000006800 s7 : 0000000000000000 s8 : 0000000480000000 s9 : 0000000080038ea0 s10: 0000000000000000 s11: ffffffffffffffff t3 : ffffffff84a035c0 t4 : fffffffef09406e8 t5 : fffffffef09406e9 t6 : ffffffff84a03758 status: 0000000000000100 badaddr: 0000000000000000 cause: 0000000000000003 [<ffffffff8322ef4c>] cma_declare_contiguous_nid+0xf2/0x64a [<ffffffff83212a58>] dma_contiguous_reserve_area+0x46/0xb4 [<ffffffff83212c3a>] dma_contiguous_reserve+0x174/0x18e [<ffffffff83208fc2>] paging_init+0x12c/0x35e [<ffffffff83206bd2>] setup_arch+0x120/0x74e [<ffffffff83201416>] start_kernel+0xce/0x68c irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<0000000000000000>] 0x0 softirqs last enabled at (0): [<0000000000000000>] 0x0 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace 0000000000000000 ]--- Fixes: f7ae023 ("riscv: Move KASAN mapping next to the kernel mapping") Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.