Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

feat: add build deb #17

Merged
merged 2 commits into from
Aug 29, 2023

Conversation

Zeno-sole
Copy link
Contributor

利用kernel自带的mkdeian的脚本生成一份Debian目录用于编译

  1. 生成一份.config
    更新内核版本后需同步更新config配置
  2. 生成debian目录
    make srcdeb-pkg #生成debian目录,读取.config 里面版本号生成control文件等

todo:

  1. mkdebian 增加内核虚包
  2. 新增更多内核构建支持

@Zeno-sole Zeno-sole force-pushed the kernel-mainline branch 3 times, most recently from b4f5532 to 33e6dbc Compare August 26, 2023 17:30
@deepin-ci-robot
Copy link

[APPROVALNOTIFIER] This PR is NOT APPROVED

This pull-request has been approved by: Avenger-285714

The full list of commands accepted by this bot can be found here.

Needs approval from an approver in each of these files:

Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment

@Zeno-sole
Copy link
Contributor Author

/merge

@Zeno-sole Zeno-sole merged commit 85c96e3 into deepin-community:kernel-mainline Aug 29, 2023
matrix-wsk pushed a commit that referenced this pull request Sep 25, 2023
commit 0b0747d upstream.

The following processes run into a deadlock. CPU 41 was waiting for CPU 29
to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29
was hung by that spinlock with IRQs disabled.

  PID: 17360    TASK: ffff95c1090c5c40  CPU: 41  COMMAND: "mrdiagd"
  !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0
  !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0
  !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0
   # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0
   # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0
   # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0
   # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0
   # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0
   # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0
   # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0
   #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0
   #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0
   #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0
   #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0
   #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0
   #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0
   #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0
   #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0
   #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0
   #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0
   #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0
   #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0
   #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0
   #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0
   #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0
   #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0
   #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0
   #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0

  PID: 17355    TASK: ffff95c1090c3d80  CPU: 29  COMMAND: "mrdiagd"
  !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0
  !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0
   # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0
   # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0
   # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0
   # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0
   # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0
   # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0
   # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0
   # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0
   #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0
   #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0
   #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0
   #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0
   #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0
   #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0
   #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0
   #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0

The lock is used to synchronize different sysfs operations, it doesn't
protect any resource that will be touched by an interrupt. Consequently
it's not required to disable IRQs. Replace the spinlock with a mutex to fix
the deadlock.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
matrix-wsk pushed a commit that referenced this pull request Oct 16, 2023
[ Upstream commit a154f5f ]

The following call trace shows a deadlock issue due to recursive locking of
mutex "device_mutex". First lock acquire is in target_for_each_device() and
second in target_free_device().

 PID: 148266   TASK: ffff8be21ffb5d00  CPU: 10   COMMAND: "iscsi_ttx"
  #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f
  #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224
  #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee
  #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7
  #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3
  #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c
  #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod]
  #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod]
  #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f
  #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583
 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod]
 #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc
 #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod]
 #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod]
 #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod]
 #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod]
 #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07
 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod]
 #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod]
 #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080
 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364

Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
matrix-wsk pushed a commit that referenced this pull request Dec 14, 2023
[ Upstream commit e3e82fc ]

When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a
cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when
removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be
dereferenced as wrong struct in irdma_free_pending_cqp_request().

  PID: 3669   TASK: ffff88aef892c000  CPU: 28  COMMAND: "kworker/28:0"
   #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34
   #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2
   #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f
   #3 [fffffe0000549eb8] do_nmi at ffffffff81079582
   #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4
      [exception RIP: native_queued_spin_lock_slowpath+1291]
      RIP: ffffffff8127e72b  RSP: ffff88aa841ef778  RFLAGS: 00000046
      RAX: 0000000000000000  RBX: ffff88b01f849700  RCX: ffffffff8127e47e
      RDX: 0000000000000000  RSI: 0000000000000004  RDI: ffffffff83857ec0
      RBP: ffff88afe3e4efc8   R8: ffffed15fc7c9dfa   R9: ffffed15fc7c9dfa
      R10: 0000000000000001  R11: ffffed15fc7c9df9  R12: 0000000000740000
      R13: ffff88b01f849708  R14: 0000000000000003  R15: ffffed1603f092e1
      ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0000
  -- <NMI exception stack> --
   #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b
   #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4
   #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363
   #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma]
   #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma]
   #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma]
   #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma]
   #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb
   #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6
   #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278
   #15 [ffff88aa841efb88] device_del at ffffffff82179d23
   #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice]
   #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice]
   #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a
   #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff
   #20 [ffff88aa841eff10] kthread at ffffffff811d87a0
   #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f

Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions")
Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn
Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com>
Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
matrix-wsk pushed a commit to matrix-wsk/kernel-6.6 that referenced this pull request Apr 8, 2024
commit 8678b10 upstream.

An errant disk backup on my desktop got into debugfs and triggered the
following deadlock scenario in the amdgpu debugfs files. The machine
also hard-resets immediately after those lines are printed (although I
wasn't able to reproduce that part when reading by hand):

[ 1318.016074][ T1082] ======================================================
[ 1318.016607][ T1082] WARNING: possible circular locking dependency detected
[ 1318.017107][ T1082] 6.8.0-rc7-00015-ge0c8221b72c0 deepin-community#17 Not tainted
[ 1318.017598][ T1082] ------------------------------------------------------
[ 1318.018096][ T1082] tar/1082 is trying to acquire lock:
[ 1318.018585][ T1082] ffff98c44175d6a0 (&mm->mmap_lock){++++}-{3:3}, at: __might_fault+0x40/0x80
[ 1318.019084][ T1082]
[ 1318.019084][ T1082] but task is already holding lock:
[ 1318.020052][ T1082] ffff98c4c13f55f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: amdgpu_debugfs_mqd_read+0x6a/0x250 [amdgpu]
[ 1318.020607][ T1082]
[ 1318.020607][ T1082] which lock already depends on the new lock.
[ 1318.020607][ T1082]
[ 1318.022081][ T1082]
[ 1318.022081][ T1082] the existing dependency chain (in reverse order) is:
[ 1318.023083][ T1082]
[ 1318.023083][ T1082] -> deepin-community#2 (reservation_ww_class_mutex){+.+.}-{3:3}:
[ 1318.024114][ T1082]        __ww_mutex_lock.constprop.0+0xe0/0x12f0
[ 1318.024639][ T1082]        ww_mutex_lock+0x32/0x90
[ 1318.025161][ T1082]        dma_resv_lockdep+0x18a/0x330
[ 1318.025683][ T1082]        do_one_initcall+0x6a/0x350
[ 1318.026210][ T1082]        kernel_init_freeable+0x1a3/0x310
[ 1318.026728][ T1082]        kernel_init+0x15/0x1a0
[ 1318.027242][ T1082]        ret_from_fork+0x2c/0x40
[ 1318.027759][ T1082]        ret_from_fork_asm+0x11/0x20
[ 1318.028281][ T1082]
[ 1318.028281][ T1082] -> deepin-community#1 (reservation_ww_class_acquire){+.+.}-{0:0}:
[ 1318.029297][ T1082]        dma_resv_lockdep+0x16c/0x330
[ 1318.029790][ T1082]        do_one_initcall+0x6a/0x350
[ 1318.030263][ T1082]        kernel_init_freeable+0x1a3/0x310
[ 1318.030722][ T1082]        kernel_init+0x15/0x1a0
[ 1318.031168][ T1082]        ret_from_fork+0x2c/0x40
[ 1318.031598][ T1082]        ret_from_fork_asm+0x11/0x20
[ 1318.032011][ T1082]
[ 1318.032011][ T1082] -> #0 (&mm->mmap_lock){++++}-{3:3}:
[ 1318.032778][ T1082]        __lock_acquire+0x14bf/0x2680
[ 1318.033141][ T1082]        lock_acquire+0xcd/0x2c0
[ 1318.033487][ T1082]        __might_fault+0x58/0x80
[ 1318.033814][ T1082]        amdgpu_debugfs_mqd_read+0x103/0x250 [amdgpu]
[ 1318.034181][ T1082]        full_proxy_read+0x55/0x80
[ 1318.034487][ T1082]        vfs_read+0xa7/0x360
[ 1318.034788][ T1082]        ksys_read+0x70/0xf0
[ 1318.035085][ T1082]        do_syscall_64+0x94/0x180
[ 1318.035375][ T1082]        entry_SYSCALL_64_after_hwframe+0x46/0x4e
[ 1318.035664][ T1082]
[ 1318.035664][ T1082] other info that might help us debug this:
[ 1318.035664][ T1082]
[ 1318.036487][ T1082] Chain exists of:
[ 1318.036487][ T1082]   &mm->mmap_lock --> reservation_ww_class_acquire --> reservation_ww_class_mutex
[ 1318.036487][ T1082]
[ 1318.037310][ T1082]  Possible unsafe locking scenario:
[ 1318.037310][ T1082]
[ 1318.037838][ T1082]        CPU0                    CPU1
[ 1318.038101][ T1082]        ----                    ----
[ 1318.038350][ T1082]   lock(reservation_ww_class_mutex);
[ 1318.038590][ T1082]                                lock(reservation_ww_class_acquire);
[ 1318.038839][ T1082]                                lock(reservation_ww_class_mutex);
[ 1318.039083][ T1082]   rlock(&mm->mmap_lock);
[ 1318.039328][ T1082]
[ 1318.039328][ T1082]  *** DEADLOCK ***
[ 1318.039328][ T1082]
[ 1318.040029][ T1082] 1 lock held by tar/1082:
[ 1318.040259][ T1082]  #0: ffff98c4c13f55f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: amdgpu_debugfs_mqd_read+0x6a/0x250 [amdgpu]
[ 1318.040560][ T1082]
[ 1318.040560][ T1082] stack backtrace:
[ 1318.041053][ T1082] CPU: 22 PID: 1082 Comm: tar Not tainted 6.8.0-rc7-00015-ge0c8221b72c0 deepin-community#17 3316c85d50e282c5643b075d1f01a4f6365e39c2
[ 1318.041329][ T1082] Hardware name: Gigabyte Technology Co., Ltd. B650 AORUS PRO AX/B650 AORUS PRO AX, BIOS F20 12/14/2023
[ 1318.041614][ T1082] Call Trace:
[ 1318.041895][ T1082]  <TASK>
[ 1318.042175][ T1082]  dump_stack_lvl+0x4a/0x80
[ 1318.042460][ T1082]  check_noncircular+0x145/0x160
[ 1318.042743][ T1082]  __lock_acquire+0x14bf/0x2680
[ 1318.043022][ T1082]  lock_acquire+0xcd/0x2c0
[ 1318.043301][ T1082]  ? __might_fault+0x40/0x80
[ 1318.043580][ T1082]  ? __might_fault+0x40/0x80
[ 1318.043856][ T1082]  __might_fault+0x58/0x80
[ 1318.044131][ T1082]  ? __might_fault+0x40/0x80
[ 1318.044408][ T1082]  amdgpu_debugfs_mqd_read+0x103/0x250 [amdgpu 8fe2afaa910cbd7654c8cab23563a94d6caebaab]
[ 1318.044749][ T1082]  full_proxy_read+0x55/0x80
[ 1318.045042][ T1082]  vfs_read+0xa7/0x360
[ 1318.045333][ T1082]  ksys_read+0x70/0xf0
[ 1318.045623][ T1082]  do_syscall_64+0x94/0x180
[ 1318.045913][ T1082]  ? do_syscall_64+0xa0/0x180
[ 1318.046201][ T1082]  ? lockdep_hardirqs_on+0x7d/0x100
[ 1318.046487][ T1082]  ? do_syscall_64+0xa0/0x180
[ 1318.046773][ T1082]  ? do_syscall_64+0xa0/0x180
[ 1318.047057][ T1082]  ? do_syscall_64+0xa0/0x180
[ 1318.047337][ T1082]  ? do_syscall_64+0xa0/0x180
[ 1318.047611][ T1082]  entry_SYSCALL_64_after_hwframe+0x46/0x4e
[ 1318.047887][ T1082] RIP: 0033:0x7f480b70a39d
[ 1318.048162][ T1082] Code: 91 ba 0d 00 f7 d8 64 89 02 b8 ff ff ff ff eb b2 e8 18 a3 01 00 0f 1f 84 00 00 00 00 00 80 3d a9 3c 0e 00 00 74 17 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 5b c3 66 2e 0f 1f 84 00 00 00 00 00 53 48 83
[ 1318.048769][ T1082] RSP: 002b:00007ffde77f5c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 1318.049083][ T1082] RAX: ffffffffffffffda RBX: 0000000000000800 RCX: 00007f480b70a39d
[ 1318.049392][ T1082] RDX: 0000000000000800 RSI: 000055c9f2120c00 RDI: 0000000000000008
[ 1318.049703][ T1082] RBP: 0000000000000800 R08: 000055c9f2120a94 R09: 0000000000000007
[ 1318.050011][ T1082] R10: 0000000000000000 R11: 0000000000000246 R12: 000055c9f2120c00
[ 1318.050324][ T1082] R13: 0000000000000008 R14: 0000000000000008 R15: 0000000000000800
[ 1318.050638][ T1082]  </TASK>

amdgpu_debugfs_mqd_read() holds a reservation when it calls
put_user(), which may fault and acquire the mmap_sem. This violates
the established locking order.

Bounce the mqd data through a kernel buffer to get put_user() out of
the illegal section.

Fixes: 445d85e ("drm/amdgpu: add debugfs interface for reading MQDs")
Cc: stable@vger.kernel.org # v6.5+
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avenger-285714 pushed a commit to Avenger-285714/DeepinKernel that referenced this pull request May 5, 2024
[ Upstream commit f8bbc07 ]

vhost_worker will call tun call backs to receive packets. If too many
illegal packets arrives, tun_do_read will keep dumping packet contents.
When console is enabled, it will costs much more cpu time to dump
packet and soft lockup will be detected.

net_ratelimit mechanism can be used to limit the dumping rate.

PID: 33036    TASK: ffff949da6f20000  CPU: 23   COMMAND: "vhost-32980"
 #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253
 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3
 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e
 deepin-community#3 [fffffe00003fced0] do_nmi at ffffffff8922660d
 deepin-community#4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663
    [exception RIP: io_serial_in+20]
    RIP: ffffffff89792594  RSP: ffffa655314979e8  RFLAGS: 00000002
    RAX: ffffffff89792500  RBX: ffffffff8af428a0  RCX: 0000000000000000
    RDX: 00000000000003fd  RSI: 0000000000000005  RDI: ffffffff8af428a0
    RBP: 0000000000002710   R8: 0000000000000004   R9: 000000000000000f
    R10: 0000000000000000  R11: ffffffff8acbf64f  R12: 0000000000000020
    R13: ffffffff8acbf698  R14: 0000000000000058  R15: 0000000000000000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 deepin-community#5 [ffffa655314979e8] io_serial_in at ffffffff89792594
 deepin-community#6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470
 deepin-community#7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6
 deepin-community#8 [ffffa65531497a20] uart_console_write at ffffffff8978b605
 deepin-community#9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558
 deepin-community#10 [ffffa65531497ac8] console_unlock at ffffffff89316124
 deepin-community#11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07
 deepin-community#12 [ffffa65531497b68] printk at ffffffff89318306
 deepin-community#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765
 deepin-community#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun]
 deepin-community#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun]
 deepin-community#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net]
 deepin-community#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost]
 deepin-community#18 [ffffa65531497f10] kthread at ffffffff892d2e72
 deepin-community#19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f

Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors")
Signed-off-by: Lei Chen <lei.chen@smartx.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Avenger-285714 pushed a commit that referenced this pull request May 5, 2024
[ Upstream commit f8bbc07 ]

vhost_worker will call tun call backs to receive packets. If too many
illegal packets arrives, tun_do_read will keep dumping packet contents.
When console is enabled, it will costs much more cpu time to dump
packet and soft lockup will be detected.

net_ratelimit mechanism can be used to limit the dumping rate.

PID: 33036    TASK: ffff949da6f20000  CPU: 23   COMMAND: "vhost-32980"
 #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253
 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3
 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e
 #3 [fffffe00003fced0] do_nmi at ffffffff8922660d
 #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663
    [exception RIP: io_serial_in+20]
    RIP: ffffffff89792594  RSP: ffffa655314979e8  RFLAGS: 00000002
    RAX: ffffffff89792500  RBX: ffffffff8af428a0  RCX: 0000000000000000
    RDX: 00000000000003fd  RSI: 0000000000000005  RDI: ffffffff8af428a0
    RBP: 0000000000002710   R8: 0000000000000004   R9: 000000000000000f
    R10: 0000000000000000  R11: ffffffff8acbf64f  R12: 0000000000000020
    R13: ffffffff8acbf698  R14: 0000000000000058  R15: 0000000000000000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594
 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470
 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6
 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605
 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558
 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124
 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07
 #12 [ffffa65531497b68] printk at ffffffff89318306
 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765
 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun]
 #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun]
 #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net]
 #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost]
 #18 [ffffa65531497f10] kthread at ffffffff892d2e72
 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f

Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors")
Signed-off-by: Lei Chen <lei.chen@smartx.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
MingcongBai pushed a commit to MingcongBai/deepin-kernel that referenced this pull request Jun 17, 2024
[ Upstream commit 769e6a1 ]

ui_browser__show() is capturing the input title that is stack allocated
memory in hist_browser__run().

Avoid a use after return by strdup-ing the string.

Committer notes:

Further explanation from Ian Rogers:

My command line using tui is:
$ sudo bash -c 'rm /tmp/asan.log*; export
ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a
sleep 1; /tmp/perf/perf mem report'
I then go to the perf annotate view and quit. This triggers the asan
error (from the log file):
```
==1254591==ERROR: AddressSanitizer: stack-use-after-return on address
0x7f2813331920 at pc 0x7f28180
65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10
READ of size 80 at 0x7f2813331920 thread T0
    #0 0x7f2818065990 in __interceptor_strlen
../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461
    deepin-community#1 0x7f2817698251 in SLsmg_write_wrapped_string
(/lib/x86_64-linux-gnu/libslang.so.2+0x98251)
    deepin-community#2 0x7f28176984b9 in SLsmg_write_nstring
(/lib/x86_64-linux-gnu/libslang.so.2+0x984b9)
    deepin-community#3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60
    deepin-community#4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266
    deepin-community#5 0x55c94045c776 in ui_browser__show ui/browser.c:288
    deepin-community#6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206
    deepin-community#7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458
    deepin-community#8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412
    deepin-community#9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527
    deepin-community#10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613
    deepin-community#11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661
    deepin-community#12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671
    deepin-community#13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141
    deepin-community#14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805
    deepin-community#15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374
    deepin-community#16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516
    deepin-community#17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350
    deepin-community#18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403
    deepin-community#19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447
    deepin-community#20 0x55c9400e53ad in main tools/perf/perf.c:561
    deepin-community#21 0x7f28170456c9 in __libc_start_call_main
../sysdeps/nptl/libc_start_call_main.h:58
    deepin-community#22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360
    deepin-community#23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId:
84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93)

Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame
    #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746

  This frame has 1 object(s):
    [32, 192) 'title' (line 747) <== Memory access at offset 32 is
inside this variable
HINT: this may be a false positive if your program uses some custom
stack unwind mechanism, swapcontext or vfork
```
hist_browser__run isn't on the stack so the asan error looks legit.
There's no clean init/exit on struct ui_browser so I may be trading a
use-after-return for a memory leak, but that seems look a good trade
anyway.

Fixes: 05e8b08 ("perf ui browser: Stop using 'self'")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240507183545.1236093-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Avenger-285714 pushed a commit to Avenger-285714/DeepinKernel that referenced this pull request Jun 21, 2024
[ Upstream commit 769e6a1 ]

ui_browser__show() is capturing the input title that is stack allocated
memory in hist_browser__run().

Avoid a use after return by strdup-ing the string.

Committer notes:

Further explanation from Ian Rogers:

My command line using tui is:
$ sudo bash -c 'rm /tmp/asan.log*; export
ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a
sleep 1; /tmp/perf/perf mem report'
I then go to the perf annotate view and quit. This triggers the asan
error (from the log file):
```
==1254591==ERROR: AddressSanitizer: stack-use-after-return on address
0x7f2813331920 at pc 0x7f28180
65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10
READ of size 80 at 0x7f2813331920 thread T0
    #0 0x7f2818065990 in __interceptor_strlen
../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461
    #1 0x7f2817698251 in SLsmg_write_wrapped_string
(/lib/x86_64-linux-gnu/libslang.so.2+0x98251)
    #2 0x7f28176984b9 in SLsmg_write_nstring
(/lib/x86_64-linux-gnu/libslang.so.2+0x984b9)
    deepin-community#3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60
    deepin-community#4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266
    deepin-community#5 0x55c94045c776 in ui_browser__show ui/browser.c:288
    deepin-community#6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206
    deepin-community#7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458
    deepin-community#8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412
    deepin-community#9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527
    deepin-community#10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613
    deepin-community#11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661
    deepin-community#12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671
    deepin-community#13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141
    deepin-community#14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805
    deepin-community#15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374
    deepin-community#16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516
    deepin-community#17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350
    deepin-community#18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403
    deepin-community#19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447
    deepin-community#20 0x55c9400e53ad in main tools/perf/perf.c:561
    deepin-community#21 0x7f28170456c9 in __libc_start_call_main
../sysdeps/nptl/libc_start_call_main.h:58
    deepin-community#22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360
    deepin-community#23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId:
84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93)

Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame
    #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746

  This frame has 1 object(s):
    [32, 192) 'title' (line 747) <== Memory access at offset 32 is
inside this variable
HINT: this may be a false positive if your program uses some custom
stack unwind mechanism, swapcontext or vfork
```
hist_browser__run isn't on the stack so the asan error looks legit.
There's no clean init/exit on struct ui_browser so I may be trading a
use-after-return for a memory leak, but that seems look a good trade
anyway.

Fixes: 05e8b08 ("perf ui browser: Stop using 'self'")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240507183545.1236093-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Avenger-285714 pushed a commit to Avenger-285714/DeepinKernel that referenced this pull request Jul 5, 2024
commit be346c1a6eeb49d8fda827d2a9522124c2f72f36 upstream.

The code in ocfs2_dio_end_io_write() estimates number of necessary
transaction credits using ocfs2_calc_extend_credits().  This however does
not take into account that the IO could be arbitrarily large and can
contain arbitrary number of extents.

Extent tree manipulations do often extend the current transaction but not
in all of the cases.  For example if we have only single block extents in
the tree, ocfs2_mark_extent_written() will end up calling
ocfs2_replace_extent_rec() all the time and we will never extend the
current transaction and eventually exhaust all the transaction credits if
the IO contains many single block extents.  Once that happens a
WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in
jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to
this error.  This was actually triggered by one of our customers on a
heavily fragmented OCFS2 filesystem.

To fix the issue make sure the transaction always has enough credits for
one extent insert before each call of ocfs2_mark_extent_written().

Heming Zhao said:

------
PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error"

PID: xxx  TASK: xxxx  CPU: 5  COMMAND: "SubmitThread-CA"
  #0 machine_kexec at ffffffff8c069932
  #1 __crash_kexec at ffffffff8c1338fa
  #2 panic at ffffffff8c1d69b9
  deepin-community#3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2]
  deepin-community#4 __ocfs2_abort at ffffffffc0c88387 [ocfs2]
  deepin-community#5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2]
  deepin-community#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2]
  deepin-community#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2]
  deepin-community#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2]
  deepin-community#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2]
deepin-community#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2]
deepin-community#11 dio_complete at ffffffff8c2b9fa7
deepin-community#12 do_blockdev_direct_IO at ffffffff8c2bc09f
deepin-community#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2]
deepin-community#14 generic_file_direct_write at ffffffff8c1dcf14
deepin-community#15 __generic_file_write_iter at ffffffff8c1dd07b
deepin-community#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2]
deepin-community#17 aio_write at ffffffff8c2cc72e
deepin-community#18 kmem_cache_alloc at ffffffff8c248dde
deepin-community#19 do_io_submit at ffffffff8c2ccada
deepin-community#20 do_syscall_64 at ffffffff8c004984
deepin-community#21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba

Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz
Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz
Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
matrix-wsk pushed a commit to matrix-wsk/kernel-6.6 that referenced this pull request Sep 4, 2024
[ Upstream commit f8bbc07 ]

vhost_worker will call tun call backs to receive packets. If too many
illegal packets arrives, tun_do_read will keep dumping packet contents.
When console is enabled, it will costs much more cpu time to dump
packet and soft lockup will be detected.

net_ratelimit mechanism can be used to limit the dumping rate.

PID: 33036    TASK: ffff949da6f20000  CPU: 23   COMMAND: "vhost-32980"
 #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253
 deepin-community#1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3
 deepin-community#2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e
 deepin-community#3 [fffffe00003fced0] do_nmi at ffffffff8922660d
 deepin-community#4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663
    [exception RIP: io_serial_in+20]
    RIP: ffffffff89792594  RSP: ffffa655314979e8  RFLAGS: 00000002
    RAX: ffffffff89792500  RBX: ffffffff8af428a0  RCX: 0000000000000000
    RDX: 00000000000003fd  RSI: 0000000000000005  RDI: ffffffff8af428a0
    RBP: 0000000000002710   R8: 0000000000000004   R9: 000000000000000f
    R10: 0000000000000000  R11: ffffffff8acbf64f  R12: 0000000000000020
    R13: ffffffff8acbf698  R14: 0000000000000058  R15: 0000000000000000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 deepin-community#5 [ffffa655314979e8] io_serial_in at ffffffff89792594
 deepin-community#6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470
 deepin-community#7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6
 deepin-community#8 [ffffa65531497a20] uart_console_write at ffffffff8978b605
 deepin-community#9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558
 deepin-community#10 [ffffa65531497ac8] console_unlock at ffffffff89316124
 deepin-community#11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07
 deepin-community#12 [ffffa65531497b68] printk at ffffffff89318306
 deepin-community#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765
 deepin-community#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun]
 deepin-community#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun]
 deepin-community#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net]
 deepin-community#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost]
 deepin-community#18 [ffffa65531497f10] kthread at ffffffff892d2e72
 deepin-community#19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f

Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors")
Signed-off-by: Lei Chen <lei.chen@smartx.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Sep 4, 2024
[ Upstream commit a699781c79ecf6cfe67fb00a0331b4088c7c8466 ]

A sysfs reader can race with a device reset or removal, attempting to
read device state when the device is not actually present. eg:

     [exception RIP: qed_get_current_link+17]
  deepin-community#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede]
  deepin-community#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3
 deepin-community#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4
 deepin-community#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300
 deepin-community#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c
 deepin-community#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b
 deepin-community#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3
 deepin-community#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1
 deepin-community#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f
 deepin-community#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb

 crash> struct net_device.state ffff9a9d21336000
    state = 5,

state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100).
The device is not present, note lack of __LINK_STATE_PRESENT (0b10).

This is the same sort of panic as observed in commit 4224cfd
("net-sysfs: add check for netdevice being present to speed_show").

There are many other callers of __ethtool_get_link_ksettings() which
don't have a device presence check.

Move this check into ethtool to protect all callers.

Fixes: d519e17 ("net: export device speed and duplex via sysfs")
Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 94ab317024ba373d37340893d1c0358638935fbb)
Avenger-285714 pushed a commit that referenced this pull request Sep 5, 2024
[ Upstream commit a699781c79ecf6cfe67fb00a0331b4088c7c8466 ]

A sysfs reader can race with a device reset or removal, attempting to
read device state when the device is not actually present. eg:

     [exception RIP: qed_get_current_link+17]
  #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede]
  #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3
 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4
 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300
 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c
 #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b
 #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3
 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1
 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f
 #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb

 crash> struct net_device.state ffff9a9d21336000
    state = 5,

state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100).
The device is not present, note lack of __LINK_STATE_PRESENT (0b10).

This is the same sort of panic as observed in commit 4224cfd
("net-sysfs: add check for netdevice being present to speed_show").

There are many other callers of __ethtool_get_link_ksettings() which
don't have a device presence check.

Move this check into ethtool to protect all callers.

Fixes: d519e17 ("net: export device speed and duplex via sysfs")
Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 94ab317024ba373d37340893d1c0358638935fbb)
Avenger-285714 pushed a commit to Avenger-285714/DeepinKernel that referenced this pull request Oct 10, 2024
[ Upstream commit dc09f007caed3b2f6a3b6bd7e13777557ae22bfd ]

During noirq suspend phase the Raspberry Pi power driver suffer of
firmware property timeouts. The reason is that the IRQ of the underlying
BCM2835 mailbox is disabled and rpi_firmware_property_list() will always
run into a timeout [1].

Since the VideoCore side isn't consider as a wakeup source, set the
IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled
during suspend-resume cycle.

[1]
PM: late suspend of devices complete after 1.754 msecs
WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128
 rpi_firmware_property_list+0x204/0x22c
Firmware transaction 0x00028001 timeout
Modules linked in:
CPU: 0 PID: 438 Comm: bash Tainted: G         C         6.9.3-dirty deepin-community#17
Hardware name: BCM2835
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x44
dump_stack_lvl from __warn+0x88/0xec
__warn from warn_slowpath_fmt+0x7c/0xb0
warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c
rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c
rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0
rpi_firmware_set_power from _genpd_power_off+0xe4/0x148
_genpd_power_off from genpd_sync_power_off+0x7c/0x11c
genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0
genpd_finish_suspend from dpm_run_callback+0x78/0xd0
dpm_run_callback from device_suspend_noirq+0xc0/0x238
device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168
dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac
suspend_devices_and_enter from pm_suspend+0x254/0x2e4
pm_suspend from state_store+0xa8/0xd4
state_store from kernfs_fop_write_iter+0x154/0x1a0
kernfs_fop_write_iter from vfs_write+0x12c/0x184
vfs_write from ksys_write+0x78/0xc0
ksys_write from ret_fast_syscall+0x0/0x54
Exception stack(0xcc93dfa8 to 0xcc93dff0)
[...]
PM: noirq suspend of devices complete after 3095.584 msecs

Link: raspberrypi/firmware#1894
Fixes: 0bae6af ("mailbox: Enable BCM2835 mailbox support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Avenger-285714 pushed a commit to Avenger-285714/DeepinKernel that referenced this pull request Oct 10, 2024
commit 9af2efee41b27a0f386fb5aa95d8d0b4b5d9fede upstream.

The fields in the hist_entry are filled on-demand which means they only
have meaningful values when relevant sort keys are used.

So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in
the hist entry can be garbage.  So it shouldn't access it
unconditionally.

I got a segfault, when I wanted to see cgroup profiles.

  $ sudo perf record -a --all-cgroups --synth=cgroup true

  $ sudo perf report -s cgroup

  Program received signal SIGSEGV, Segmentation fault.
  0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
  48		return RC_CHK_ACCESS(map)->dso;
  (gdb) bt
  #0  0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
  #1  0x00005555557aa39b in map__load (map=0x0) at util/map.c:344
  #2  0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385
  deepin-community#3  0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true)
      at util/hist.c:644
  deepin-community#4  0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
      block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761
  deepin-community#5  0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
      sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779
  deepin-community#6  0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015
  deepin-community#7  0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0)
      at util/hist.c:1260
  deepin-community#8  0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0,
      machine=0x5555560388e8) at builtin-report.c:334
  deepin-community#9  0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128,
      sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232
  deepin-community#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128,
      sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271
  deepin-community#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0,
      file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354
  deepin-community#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132
  deepin-community#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245
  deepin-community#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324
  deepin-community#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342
  deepin-community#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60)
      at util/session.c:780
  deepin-community#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688,
      file_path=0x555556038ff0 "perf.data") at util/session.c:1406

As you can see the entry->ms.map was NULL even if he->ms.map has a
value.  This is because 'sym' sort key is not given, so it cannot assume
whether he->ms.sym and entry->ms.sym is the same.  I only checked the
'sym' sort key here as it implies 'dso' behavior (so maps are the same).

Fixes: ac01c8c4246546fd ("perf hist: Update hist symbol when updating maps")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Matt Fleming <matt@readmodwrite.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240826221045.1202305-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avenger-285714 pushed a commit to Avenger-285714/DeepinKernel that referenced this pull request Oct 11, 2024
commit 9af2efee41b27a0f386fb5aa95d8d0b4b5d9fede upstream.

The fields in the hist_entry are filled on-demand which means they only
have meaningful values when relevant sort keys are used.

So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in
the hist entry can be garbage.  So it shouldn't access it
unconditionally.

I got a segfault, when I wanted to see cgroup profiles.

  $ sudo perf record -a --all-cgroups --synth=cgroup true

  $ sudo perf report -s cgroup

  Program received signal SIGSEGV, Segmentation fault.
  0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
  48		return RC_CHK_ACCESS(map)->dso;
  (gdb) bt
  #0  0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
  #1  0x00005555557aa39b in map__load (map=0x0) at util/map.c:344
  #2  0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385
  deepin-community#3  0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true)
      at util/hist.c:644
  deepin-community#4  0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
      block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761
  deepin-community#5  0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
      sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779
  deepin-community#6  0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015
  deepin-community#7  0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0)
      at util/hist.c:1260
  deepin-community#8  0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0,
      machine=0x5555560388e8) at builtin-report.c:334
  deepin-community#9  0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128,
      sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232
  deepin-community#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128,
      sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271
  deepin-community#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0,
      file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354
  deepin-community#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132
  deepin-community#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245
  deepin-community#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324
  deepin-community#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342
  deepin-community#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60)
      at util/session.c:780
  deepin-community#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688,
      file_path=0x555556038ff0 "perf.data") at util/session.c:1406

As you can see the entry->ms.map was NULL even if he->ms.map has a
value.  This is because 'sym' sort key is not given, so it cannot assume
whether he->ms.sym and entry->ms.sym is the same.  I only checked the
'sym' sort key here as it implies 'dso' behavior (so maps are the same).

Fixes: ac01c8c4246546fd ("perf hist: Update hist symbol when updating maps")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Matt Fleming <matt@readmodwrite.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240826221045.1202305-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
opsiff pushed a commit that referenced this pull request Oct 11, 2024
[ Upstream commit dc09f007caed3b2f6a3b6bd7e13777557ae22bfd ]

During noirq suspend phase the Raspberry Pi power driver suffer of
firmware property timeouts. The reason is that the IRQ of the underlying
BCM2835 mailbox is disabled and rpi_firmware_property_list() will always
run into a timeout [1].

Since the VideoCore side isn't consider as a wakeup source, set the
IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled
during suspend-resume cycle.

[1]
PM: late suspend of devices complete after 1.754 msecs
WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128
 rpi_firmware_property_list+0x204/0x22c
Firmware transaction 0x00028001 timeout
Modules linked in:
CPU: 0 PID: 438 Comm: bash Tainted: G         C         6.9.3-dirty #17
Hardware name: BCM2835
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x44
dump_stack_lvl from __warn+0x88/0xec
__warn from warn_slowpath_fmt+0x7c/0xb0
warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c
rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c
rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0
rpi_firmware_set_power from _genpd_power_off+0xe4/0x148
_genpd_power_off from genpd_sync_power_off+0x7c/0x11c
genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0
genpd_finish_suspend from dpm_run_callback+0x78/0xd0
dpm_run_callback from device_suspend_noirq+0xc0/0x238
device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168
dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac
suspend_devices_and_enter from pm_suspend+0x254/0x2e4
pm_suspend from state_store+0xa8/0xd4
state_store from kernfs_fop_write_iter+0x154/0x1a0
kernfs_fop_write_iter from vfs_write+0x12c/0x184
vfs_write from ksys_write+0x78/0xc0
ksys_write from ret_fast_syscall+0x0/0x54
Exception stack(0xcc93dfa8 to 0xcc93dff0)
[...]
PM: noirq suspend of devices complete after 3095.584 msecs

Link: raspberrypi/firmware#1894
Fixes: 0bae6af ("mailbox: Enable BCM2835 mailbox support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
opsiff pushed a commit that referenced this pull request Oct 11, 2024
commit 9af2efee41b27a0f386fb5aa95d8d0b4b5d9fede upstream.

The fields in the hist_entry are filled on-demand which means they only
have meaningful values when relevant sort keys are used.

So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in
the hist entry can be garbage.  So it shouldn't access it
unconditionally.

I got a segfault, when I wanted to see cgroup profiles.

  $ sudo perf record -a --all-cgroups --synth=cgroup true

  $ sudo perf report -s cgroup

  Program received signal SIGSEGV, Segmentation fault.
  0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
  48		return RC_CHK_ACCESS(map)->dso;
  (gdb) bt
  #0  0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
  #1  0x00005555557aa39b in map__load (map=0x0) at util/map.c:344
  #2  0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385
  #3  0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true)
      at util/hist.c:644
  #4  0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
      block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761
  #5  0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
      sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779
  #6  0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015
  #7  0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0)
      at util/hist.c:1260
  #8  0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0,
      machine=0x5555560388e8) at builtin-report.c:334
  #9  0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128,
      sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232
  #10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128,
      sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271
  #11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0,
      file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354
  #12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132
  #13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245
  #14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324
  #15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342
  #16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60)
      at util/session.c:780
  #17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688,
      file_path=0x555556038ff0 "perf.data") at util/session.c:1406

As you can see the entry->ms.map was NULL even if he->ms.map has a
value.  This is because 'sym' sort key is not given, so it cannot assume
whether he->ms.sym and entry->ms.sym is the same.  I only checked the
'sym' sort key here as it implies 'dso' behavior (so maps are the same).

Fixes: ac01c8c4246546fd ("perf hist: Update hist symbol when updating maps")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Matt Fleming <matt@readmodwrite.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240826221045.1202305-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
opsiff pushed a commit that referenced this pull request Dec 7, 2024
[ Upstream commit 826cc42adf44930a633d11a5993676d85ddb0842 ]

My colleague Wupeng found the following problems during fault injection:

BUG: unable to handle page fault for address: fffffbfff809d073
PGD 6e648067 P4D 123ec8067 PUD 123ec4067 PMD 100e38067 PTE 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 5 UID: 0 PID: 755 Comm: modprobe Not tainted 6.12.0-rc3+ #17
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
RIP: 0010:__asan_load8+0x4c/0xa0
...
Call Trace:
 <TASK>
 blkdev_put_whole+0x41/0x70
 bdev_release+0x1a3/0x250
 blkdev_release+0x11/0x20
 __fput+0x1d7/0x4a0
 task_work_run+0xfc/0x180
 syscall_exit_to_user_mode+0x1de/0x1f0
 do_syscall_64+0x6b/0x170
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

loop_init() is calling loop_add() after __register_blkdev() succeeds and
is ignoring disk_add() failure from loop_add(), for loop_add() failure
is not fatal and successfully created disks are already visible to
bdev_open().

brd_init() is currently calling brd_alloc() before __register_blkdev()
succeeds and is releasing successfully created disks when brd_init()
returns an error. This can cause UAF for the latter two case:

case 1:
    T1:
modprobe brd
  brd_init
    brd_alloc(0) // success
      add_disk
        disk_scan_partitions
          bdev_file_open_by_dev // alloc file
          fput // won't free until back to userspace
    brd_alloc(1) // failed since mem alloc error inject
  // error path for modprobe will release code segment
  // back to userspace
  __fput
    blkdev_release
      bdev_release
        blkdev_put_whole
          bdev->bd_disk->fops->release // fops is freed now, UAF!

case 2:
    T1:                            T2:
modprobe brd
  brd_init
    brd_alloc(0) // success
                                   open(/dev/ram0)
    brd_alloc(1) // fail
  // error path for modprobe

                                   close(/dev/ram0)
                                   ...
                                   /* UAF! */
                                   bdev->bd_disk->fops->release

Fix this problem by following what loop_init() does. Besides,
reintroduce brd_devices_mutex to help serialize modifications to
brd_list.

Fixes: 7f9b348 ("brd: convert to blk_alloc_disk/blk_cleanup_disk")
Reported-by: Wupeng Ma <mawupeng1@huawei.com>
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241030034914.907829-1-yangerkun@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 7eedcee6427f48a4256e3da757cb8ce47445ded9)
opsiff pushed a commit that referenced this pull request Dec 7, 2024
commit 17af2b39daf12870cac61ffc360e62bc35798afb upstream.

The workqueue should be destroyed in mtk_jpeg_core.c since commit
09aea13 ("media: mtk-jpeg: refactor some variables"), otherwise
the below calltrace can be easily triggered.

[  677.862514] Unable to handle kernel paging request at virtual address dfff800000000023
[  677.863633] KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f]
...
[  677.879654] CPU: 6 PID: 1071 Comm: modprobe Tainted: G           O       6.8.12-mtk+gfa1a78e5d24b+ #17
...
[  677.882838] pc : destroy_workqueue+0x3c/0x770
[  677.883413] lr : mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw]
[  677.884314] sp : ffff80008ad974f0
[  677.884744] x29: ffff80008ad974f0 x28: ffff0000d7115580 x27: ffff0000dd691070
[  677.885669] x26: ffff0000dd691408 x25: ffff8000844af3e0 x24: ffff80008ad97690
[  677.886592] x23: ffff0000e051d400 x22: ffff0000dd691010 x21: dfff800000000000
[  677.887515] x20: 0000000000000000 x19: 0000000000000000 x18: ffff800085397ac0
[  677.888438] x17: 0000000000000000 x16: ffff8000801b87c8 x15: 1ffff000115b2e10
[  677.889361] x14: 00000000f1f1f1f1 x13: 0000000000000000 x12: ffff7000115b2e4d
[  677.890285] x11: 1ffff000115b2e4c x10: ffff7000115b2e4c x9 : ffff80000aa43e90
[  677.891208] x8 : 00008fffeea4d1b4 x7 : ffff80008ad97267 x6 : 0000000000000001
[  677.892131] x5 : ffff80008ad97260 x4 : ffff7000115b2e4d x3 : 0000000000000000
[  677.893054] x2 : 0000000000000023 x1 : dfff800000000000 x0 : 0000000000000118
[  677.893977] Call trace:
[  677.894297]  destroy_workqueue+0x3c/0x770
[  677.894826]  mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw]
[  677.895677]  devm_action_release+0x50/0x90
[  677.896211]  release_nodes+0xe8/0x170
[  677.896688]  devres_release_all+0xf8/0x178
[  677.897219]  device_unbind_cleanup+0x24/0x170
[  677.897785]  device_release_driver_internal+0x35c/0x480
[  677.898461]  device_release_driver+0x20/0x38
...
[  677.912665] ---[ end trace 0000000000000000 ]---

Fixes: 09aea13 ("media: mtk-jpeg: refactor some variables")
Cc: <stable@vger.kernel.org>
Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 98129fec93b70f6a187b105139e4ddb7143889e3)
opsiff pushed a commit that referenced this pull request Dec 7, 2024
commit 17af2b39daf12870cac61ffc360e62bc35798afb upstream.

The workqueue should be destroyed in mtk_jpeg_core.c since commit
09aea13 ("media: mtk-jpeg: refactor some variables"), otherwise
the below calltrace can be easily triggered.

[  677.862514] Unable to handle kernel paging request at virtual address dfff800000000023
[  677.863633] KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f]
...
[  677.879654] CPU: 6 PID: 1071 Comm: modprobe Tainted: G           O       6.8.12-mtk+gfa1a78e5d24b+ #17
...
[  677.882838] pc : destroy_workqueue+0x3c/0x770
[  677.883413] lr : mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw]
[  677.884314] sp : ffff80008ad974f0
[  677.884744] x29: ffff80008ad974f0 x28: ffff0000d7115580 x27: ffff0000dd691070
[  677.885669] x26: ffff0000dd691408 x25: ffff8000844af3e0 x24: ffff80008ad97690
[  677.886592] x23: ffff0000e051d400 x22: ffff0000dd691010 x21: dfff800000000000
[  677.887515] x20: 0000000000000000 x19: 0000000000000000 x18: ffff800085397ac0
[  677.888438] x17: 0000000000000000 x16: ffff8000801b87c8 x15: 1ffff000115b2e10
[  677.889361] x14: 00000000f1f1f1f1 x13: 0000000000000000 x12: ffff7000115b2e4d
[  677.890285] x11: 1ffff000115b2e4c x10: ffff7000115b2e4c x9 : ffff80000aa43e90
[  677.891208] x8 : 00008fffeea4d1b4 x7 : ffff80008ad97267 x6 : 0000000000000001
[  677.892131] x5 : ffff80008ad97260 x4 : ffff7000115b2e4d x3 : 0000000000000000
[  677.893054] x2 : 0000000000000023 x1 : dfff800000000000 x0 : 0000000000000118
[  677.893977] Call trace:
[  677.894297]  destroy_workqueue+0x3c/0x770
[  677.894826]  mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw]
[  677.895677]  devm_action_release+0x50/0x90
[  677.896211]  release_nodes+0xe8/0x170
[  677.896688]  devres_release_all+0xf8/0x178
[  677.897219]  device_unbind_cleanup+0x24/0x170
[  677.897785]  device_release_driver_internal+0x35c/0x480
[  677.898461]  device_release_driver+0x20/0x38
...
[  677.912665] ---[ end trace 0000000000000000 ]---

Fixes: 09aea13 ("media: mtk-jpeg: refactor some variables")
Cc: <stable@vger.kernel.org>
Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 98129fec93b70f6a187b105139e4ddb7143889e3)
opsiff pushed a commit that referenced this pull request Dec 9, 2024
[ Upstream commit 826cc42adf44930a633d11a5993676d85ddb0842 ]

My colleague Wupeng found the following problems during fault injection:

BUG: unable to handle page fault for address: fffffbfff809d073
PGD 6e648067 P4D 123ec8067 PUD 123ec4067 PMD 100e38067 PTE 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 5 UID: 0 PID: 755 Comm: modprobe Not tainted 6.12.0-rc3+ #17
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
RIP: 0010:__asan_load8+0x4c/0xa0
...
Call Trace:
 <TASK>
 blkdev_put_whole+0x41/0x70
 bdev_release+0x1a3/0x250
 blkdev_release+0x11/0x20
 __fput+0x1d7/0x4a0
 task_work_run+0xfc/0x180
 syscall_exit_to_user_mode+0x1de/0x1f0
 do_syscall_64+0x6b/0x170
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

loop_init() is calling loop_add() after __register_blkdev() succeeds and
is ignoring disk_add() failure from loop_add(), for loop_add() failure
is not fatal and successfully created disks are already visible to
bdev_open().

brd_init() is currently calling brd_alloc() before __register_blkdev()
succeeds and is releasing successfully created disks when brd_init()
returns an error. This can cause UAF for the latter two case:

case 1:
    T1:
modprobe brd
  brd_init
    brd_alloc(0) // success
      add_disk
        disk_scan_partitions
          bdev_file_open_by_dev // alloc file
          fput // won't free until back to userspace
    brd_alloc(1) // failed since mem alloc error inject
  // error path for modprobe will release code segment
  // back to userspace
  __fput
    blkdev_release
      bdev_release
        blkdev_put_whole
          bdev->bd_disk->fops->release // fops is freed now, UAF!

case 2:
    T1:                            T2:
modprobe brd
  brd_init
    brd_alloc(0) // success
                                   open(/dev/ram0)
    brd_alloc(1) // fail
  // error path for modprobe

                                   close(/dev/ram0)
                                   ...
                                   /* UAF! */
                                   bdev->bd_disk->fops->release

Fix this problem by following what loop_init() does. Besides,
reintroduce brd_devices_mutex to help serialize modifications to
brd_list.

Fixes: 7f9b348 ("brd: convert to blk_alloc_disk/blk_cleanup_disk")
Reported-by: Wupeng Ma <mawupeng1@huawei.com>
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241030034914.907829-1-yangerkun@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 410896624db639500f24f46478b4bfa05c76bf56)
opsiff pushed a commit that referenced this pull request Dec 9, 2024
commit 17af2b39daf12870cac61ffc360e62bc35798afb upstream.

The workqueue should be destroyed in mtk_jpeg_core.c since commit
09aea13 ("media: mtk-jpeg: refactor some variables"), otherwise
the below calltrace can be easily triggered.

[  677.862514] Unable to handle kernel paging request at virtual address dfff800000000023
[  677.863633] KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f]
...
[  677.879654] CPU: 6 PID: 1071 Comm: modprobe Tainted: G           O       6.8.12-mtk+gfa1a78e5d24b+ #17
...
[  677.882838] pc : destroy_workqueue+0x3c/0x770
[  677.883413] lr : mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw]
[  677.884314] sp : ffff80008ad974f0
[  677.884744] x29: ffff80008ad974f0 x28: ffff0000d7115580 x27: ffff0000dd691070
[  677.885669] x26: ffff0000dd691408 x25: ffff8000844af3e0 x24: ffff80008ad97690
[  677.886592] x23: ffff0000e051d400 x22: ffff0000dd691010 x21: dfff800000000000
[  677.887515] x20: 0000000000000000 x19: 0000000000000000 x18: ffff800085397ac0
[  677.888438] x17: 0000000000000000 x16: ffff8000801b87c8 x15: 1ffff000115b2e10
[  677.889361] x14: 00000000f1f1f1f1 x13: 0000000000000000 x12: ffff7000115b2e4d
[  677.890285] x11: 1ffff000115b2e4c x10: ffff7000115b2e4c x9 : ffff80000aa43e90
[  677.891208] x8 : 00008fffeea4d1b4 x7 : ffff80008ad97267 x6 : 0000000000000001
[  677.892131] x5 : ffff80008ad97260 x4 : ffff7000115b2e4d x3 : 0000000000000000
[  677.893054] x2 : 0000000000000023 x1 : dfff800000000000 x0 : 0000000000000118
[  677.893977] Call trace:
[  677.894297]  destroy_workqueue+0x3c/0x770
[  677.894826]  mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw]
[  677.895677]  devm_action_release+0x50/0x90
[  677.896211]  release_nodes+0xe8/0x170
[  677.896688]  devres_release_all+0xf8/0x178
[  677.897219]  device_unbind_cleanup+0x24/0x170
[  677.897785]  device_release_driver_internal+0x35c/0x480
[  677.898461]  device_release_driver+0x20/0x38
...
[  677.912665] ---[ end trace 0000000000000000 ]---

Fixes: 09aea13 ("media: mtk-jpeg: refactor some variables")
Cc: <stable@vger.kernel.org>
Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 0ba08c21c6a92e6512e73644555120427c9a49d4)
opsiff pushed a commit that referenced this pull request Dec 9, 2024
[ Upstream commit 826cc42adf44930a633d11a5993676d85ddb0842 ]

My colleague Wupeng found the following problems during fault injection:

BUG: unable to handle page fault for address: fffffbfff809d073
PGD 6e648067 P4D 123ec8067 PUD 123ec4067 PMD 100e38067 PTE 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 5 UID: 0 PID: 755 Comm: modprobe Not tainted 6.12.0-rc3+ #17
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
RIP: 0010:__asan_load8+0x4c/0xa0
...
Call Trace:
 <TASK>
 blkdev_put_whole+0x41/0x70
 bdev_release+0x1a3/0x250
 blkdev_release+0x11/0x20
 __fput+0x1d7/0x4a0
 task_work_run+0xfc/0x180
 syscall_exit_to_user_mode+0x1de/0x1f0
 do_syscall_64+0x6b/0x170
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

loop_init() is calling loop_add() after __register_blkdev() succeeds and
is ignoring disk_add() failure from loop_add(), for loop_add() failure
is not fatal and successfully created disks are already visible to
bdev_open().

brd_init() is currently calling brd_alloc() before __register_blkdev()
succeeds and is releasing successfully created disks when brd_init()
returns an error. This can cause UAF for the latter two case:

case 1:
    T1:
modprobe brd
  brd_init
    brd_alloc(0) // success
      add_disk
        disk_scan_partitions
          bdev_file_open_by_dev // alloc file
          fput // won't free until back to userspace
    brd_alloc(1) // failed since mem alloc error inject
  // error path for modprobe will release code segment
  // back to userspace
  __fput
    blkdev_release
      bdev_release
        blkdev_put_whole
          bdev->bd_disk->fops->release // fops is freed now, UAF!

case 2:
    T1:                            T2:
modprobe brd
  brd_init
    brd_alloc(0) // success
                                   open(/dev/ram0)
    brd_alloc(1) // fail
  // error path for modprobe

                                   close(/dev/ram0)
                                   ...
                                   /* UAF! */
                                   bdev->bd_disk->fops->release

Fix this problem by following what loop_init() does. Besides,
reintroduce brd_devices_mutex to help serialize modifications to
brd_list.

Fixes: 7f9b348 ("brd: convert to blk_alloc_disk/blk_cleanup_disk")
Reported-by: Wupeng Ma <mawupeng1@huawei.com>
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241030034914.907829-1-yangerkun@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 410896624db639500f24f46478b4bfa05c76bf56)
opsiff pushed a commit that referenced this pull request Dec 9, 2024
commit 17af2b39daf12870cac61ffc360e62bc35798afb upstream.

The workqueue should be destroyed in mtk_jpeg_core.c since commit
09aea13 ("media: mtk-jpeg: refactor some variables"), otherwise
the below calltrace can be easily triggered.

[  677.862514] Unable to handle kernel paging request at virtual address dfff800000000023
[  677.863633] KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f]
...
[  677.879654] CPU: 6 PID: 1071 Comm: modprobe Tainted: G           O       6.8.12-mtk+gfa1a78e5d24b+ #17
...
[  677.882838] pc : destroy_workqueue+0x3c/0x770
[  677.883413] lr : mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw]
[  677.884314] sp : ffff80008ad974f0
[  677.884744] x29: ffff80008ad974f0 x28: ffff0000d7115580 x27: ffff0000dd691070
[  677.885669] x26: ffff0000dd691408 x25: ffff8000844af3e0 x24: ffff80008ad97690
[  677.886592] x23: ffff0000e051d400 x22: ffff0000dd691010 x21: dfff800000000000
[  677.887515] x20: 0000000000000000 x19: 0000000000000000 x18: ffff800085397ac0
[  677.888438] x17: 0000000000000000 x16: ffff8000801b87c8 x15: 1ffff000115b2e10
[  677.889361] x14: 00000000f1f1f1f1 x13: 0000000000000000 x12: ffff7000115b2e4d
[  677.890285] x11: 1ffff000115b2e4c x10: ffff7000115b2e4c x9 : ffff80000aa43e90
[  677.891208] x8 : 00008fffeea4d1b4 x7 : ffff80008ad97267 x6 : 0000000000000001
[  677.892131] x5 : ffff80008ad97260 x4 : ffff7000115b2e4d x3 : 0000000000000000
[  677.893054] x2 : 0000000000000023 x1 : dfff800000000000 x0 : 0000000000000118
[  677.893977] Call trace:
[  677.894297]  destroy_workqueue+0x3c/0x770
[  677.894826]  mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw]
[  677.895677]  devm_action_release+0x50/0x90
[  677.896211]  release_nodes+0xe8/0x170
[  677.896688]  devres_release_all+0xf8/0x178
[  677.897219]  device_unbind_cleanup+0x24/0x170
[  677.897785]  device_release_driver_internal+0x35c/0x480
[  677.898461]  device_release_driver+0x20/0x38
...
[  677.912665] ---[ end trace 0000000000000000 ]---

Fixes: 09aea13 ("media: mtk-jpeg: refactor some variables")
Cc: <stable@vger.kernel.org>
Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 0ba08c21c6a92e6512e73644555120427c9a49d4)
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

Successfully merging this pull request may close these issues.

3 participants