responsive tutorial

config.toml

@@ -172,19 +172,19 @@ enable = false
 #	icon = "fa fa-envelope"
 #        desc = "Discuss development issues around the project"
 [[params.versions]]
-  version = "Current(v1.9.0)"
+  version = "Current(v1.10.0)"
   url = "https://dell.github.io/csm-docs/docs/"
 
 [[params.versions]]
-  version = "v1.8.0"
+  version = "v1.9.1"
   url = "https://dell.github.io/csm-docs/v1"
 
 [[params.versions]]
-  version = "v1.7.1"
+  version = "v1.8.0"
   url = "https://dell.github.io/csm-docs/v2"
 
 [[params.versions]]
-  version = "v1.6.1"
+  version = "v1.7.1"
   url = "https://dell.github.io/csm-docs/v3"  
 
 [[menu.main]]

content/docs/authorization/Backup and Restore/helm/_index.md

@@ -75,9 +75,9 @@ deployment.apps/proxy-server restarted
 
 ## Tenants, Quota, and Volume ownership
 
-Redis is used to store application data regarding [tenants, quota, and volume ownership](../../design#quota--volume-ownership) with the Storage Class specified in the `redis.storageClass` parameter in the values file, or with the default Storage Class if that parameter was not specified. 
+Redis is used to store application data regarding [tenants, quota, and volume ownership](../../design#quota--volume-ownership) with the Storage Class `csm-authorization-local-storage` or the one specified in the `redis.storageClass` parameter in the values file. 
 
-The Persistent Volume for Redis is dynamically provisioned by this Storage Class with the `redis-primary-pv-claim` Persistent Volume Claim. See the example.
+The Persistent Volume for Redis is provisioned by the above Storage Class with the `redis-primary-pv-claim` Persistent Volume Claim. See the example.
 
 ```bash
 kubectl get persistentvolume

content/docs/authorization/_index.md

@@ -41,7 +41,7 @@ The following diagram shows a high-level overview of CSM for Authorization with
 {{<table "table table-striped table-bordered table-sm">}}
 |               | PowerMax         | PowerFlex | PowerScale |
 |---------------|:----------------:|:-------------------:|:----------------:|
-| Storage Array |PowerMax 2500/8500 PowerMaxOS 10 (6079) , PowerMaxOS 10.0.1 (6079) , PowerMaxOS 10.1 (6079)<br> PowerMax 2000/8000 - 5978.711.xxx, 5978.479.xxx,<br> Unisphere 10.0, 10.0.1, 10.1|    3.6.x, 4.0.x, 4.5    | OneFS 9.5.0.5, 9.5.0.6 |
+| Storage Array |PowerMax 2500/8500 PowerMaxOS 10 (6079) , PowerMaxOS 10.0.1 (6079) , PowerMaxOS 10.1 (6079)<br> PowerMax 2000/8000 - 5978.711.xxx, 5978.479.xxx,<br> Unisphere 10.0, 10.0.1, 10.1|    3.6.x, 4.0.x, 4.5    | OneFS 9.5.0.x (x >= 5) |
 {{</table>}}
 
 ## Supported CSI Drivers

content/docs/authorization/cli.md

@@ -247,6 +247,11 @@ Usually, you will want to pipe the output to kubectl to apply the secret
 ```bash
 karavictl generate token --tenant Alice --admin-token admintoken.yaml --addr csm-authorization.host.com | kubectl apply -f -
 ```
+The token is read once when the driver pods are started and is not dynamically updated. If you are applying a new token in an existing driver installation, restart the driver pods for the new token to take effect.
+```bash
+kubectl -n <driver-namespace> rollout restart deploy/<driver>-controller
+kubectl -n <driver-namespace> rollout restart ds/<driver>-node
+```
 
 ### karavictl role
 

content/docs/authorization/configuration/powerflex/_index.md

@@ -55,7 +55,7 @@ Given a setup where Kubernetes, a storage system, and the CSM for Authorization
 
     **Helm**
 
-    Refer to the [Install the Driver](../../../csidriver/installation/helm/powerflex/#install-the-driver) section to edit the parameters in `samples/config.yaml` to configure the driver to communicate with the CSM Authorization sidecar.
+    Refer to the [Install the Driver](../../../deployment/helm/drivers/installation/powerflex/#install-the-driver) section to edit the parameters in `samples/config.yaml` to configure the driver to communicate with the CSM Authorization sidecar.
 
     - Update `endpoint` to match the localhost endpoint in `samples/secret/karavi-authorization-config.json`.
 
@@ -78,7 +78,7 @@ Given a setup where Kubernetes, a storage system, and the CSM for Authorization
 
     **Operator**
 
-    Refer to the [Create Secret](../../../deployment/csmoperator/drivers/powerflex/#create-secret) section to prepare `config.yaml` to configure the driver to communicate with the CSM Authorization sidecar.
+    Refer to the [Create Secret](../../../deployment/csmoperator/drivers/powerflex/#create-secret) section to prepare `secret.yaml` to configure the driver to communicate with the CSM Authorization sidecar.
 
     - Update `endpoint` to match the localhost endpoint in `samples/secret/karavi-authorization-config.json`.
 
@@ -102,13 +102,13 @@ Given a setup where Kubernetes, a storage system, and the CSM for Authorization
 
     **Helm**
 
-    Refer to the [Install the Driver](../../../csidriver/installation/helm/powerflex/#install-the-driver) section to edit the parameters in `myvalues.yaml` to enable CSM Authorization.
+    Refer to the [Install the Driver](../../../deployment/helm/drivers/installation/powerflex/#install-the-driver) section to edit the parameters in `myvalues.yaml` to enable CSM Authorization.
 
     - Update `authorization.enabled` to `true`.
 
     - Update `images.authorization` to the image of the CSM Authorization sidecar. In most cases, you can leave the default value.
 
-    - Update `authorization.proxyHost` to the hostname of the CSM Authorization Proxy Server.
+    - Update `authorization.proxyHost` to the hostname of the CSM Authorization Proxy Server. `csm-authorization.com` is a placeholder for the proxyHost. See the administrator of CSM for Authorization for the correct value.
 
     - Update `authorization.skipCertificateValidation` to `true` or `false` depending on if you want to disable or enable certificate validation of the CSM Authorization Proxy Server.
 
@@ -119,8 +119,8 @@ Given a setup where Kubernetes, a storage system, and the CSM for Authorization
       enabled: true
 
       # sidecarProxyImage: the container image used for the csm-authorization-sidecar.
-      # Default value: dellemc/csm-authorization-sidecar:v1.9.0
-      sidecarProxyImage: dellemc/csm-authorization-sidecar:v1.9.0
+      # Default value: dellemc/csm-authorization-sidecar:v1.10.0
+      sidecarProxyImage: dellemc/csm-authorization-sidecar:v1.10.0
 
       # proxyHost: hostname of the csm-authorization server
       # Default value: None
@@ -144,7 +144,7 @@ Given a setup where Kubernetes, a storage system, and the CSM for Authorization
 
     - Update the `image` to the image of the CSM Authorization sidecar. In most cases, you can leave the default value.
 
-    - Update the `PROXY_HOST` environment value to the hostname of the CSM Authorization Proxy Server.
+    - Update the `PROXY_HOST` environment value to the hostname of the CSM Authorization Proxy Server. `csm-authorization.com` is a placeholder for the proxyHost. See the administrator of CSM for Authorization for the correct value.
 
     - Update the `SKIP_CERTIFICATE_VALIDATION` environment value to `true` or `false` depending on if you want to disable or enable certificate validation of the CSM Authorization Proxy Server.
 
@@ -156,10 +156,10 @@ Given a setup where Kubernetes, a storage system, and the CSM for Authorization
       - name: authorization
         # enable: Enable/Disable csm-authorization
         enabled: true
-        configVersion: v1.9.0
+        configVersion: v1.10.0
         components:
         - name: karavi-authorization-proxy
-          image: dellemc/csm-authorization-sidecar:v1.9.0
+          image: dellemc/csm-authorization-sidecar:v1.10.0
           envs:
             # proxyHost: hostname of the csm-authorization server
             - name: "PROXY_HOST"

content/docs/authorization/configuration/powermax/_index.md

@@ -51,13 +51,21 @@ Create the karavi-authorization-config secret using this command:
       kubectl -n powermax create secret generic proxy-server-root-certificate --from-file=rootCertificate.pem=/path/to/rootCA -o yaml --dry-run=client | kubectl apply -f -
       ```
 
-4. Enable CSM Authorization in the driver installation applicable to your installation method.
+4. Prepare the driver configuration secret, applicable to your driver installation method, to communicate with the CSM Authorization sidecar.
 
     **Helm**
 
-    In [Install the Driver](../../../csidriver/installation/helm/powermax/#install-the-driver) where you edit `samples/secret/secret.yaml` with the credentials of the PowerMax, you can leave these with the default values as they will be ignored.
+    Refer to the [Install the Driver](../../../deployment/helm/drivers/installation/powermax/#install-the-driver) section where you edit `samples/secret/secret.yaml` with the credentials of the PowerMax. Leave `username` and `password` with the default values as they will be ignored.
 
-    Refer to the [Install the Driver](../../../csidriver/installation/helm/powermax/#install-the-driver) section to edit the parameters in `my-powermax-settings.yaml` file to configure the driver to communicate with the CSM Authorization sidecar.
+    **Operator**
+
+    Refer to the [Install the Driver](../../../deployment/csmoperator/drivers/powermax/#install-driver) section to prepare `powermax-creds.yaml`. Leave `username` and `password` with the default values as they will be ignored.
+
+5. Enable CSM Authorization in the driver installation applicable to your installation method.
+
+    **Helm**
+
+    Refer to the [Install the Driver](../../../deployment/helm/drivers/installation/powermax/#install-the-driver) section to edit the parameters in `my-powermax-settings.yaml` file to configure the driver to communicate with the CSM Authorization sidecar.
 
     - Update `global.storageArrays.endpoint` to match the localhost endpoint in `samples/secret/karavi-authorization-config.json`.
 
@@ -67,7 +75,7 @@ Create the karavi-authorization-config secret using this command:
 
     - Update `images.authorization` to the image of the CSM Authorization sidecar. In most cases, you can leave the default value.
 
-    - Update `authorization.proxyHost` to the hostname of the CSM Authorization Proxy Server.
+    - Update `authorization.proxyHost` to the hostname of the CSM Authorization Proxy Server. `csm-authorization.com` is a placeholder for the proxyHost. See the administrator of CSM for Authorization for the correct value.
 
     - Update `authorization.skipCertificateValidation` to `true` or `false` depending on if you want to disable or enable certificate validation of the CSM Authorization Proxy Server.
 
@@ -85,8 +93,8 @@ Create the karavi-authorization-config secret using this command:
       enabled: true
 
       # sidecarProxyImage: the container image used for the csm-authorization-sidecar.
-      # Default value: dellemc/csm-authorization-sidecar:v1.9.0
-      sidecarProxyImage: dellemc/csm-authorization-sidecar:v1.9.0
+      # Default value: dellemc/csm-authorization-sidecar:v1.10.0
+      sidecarProxyImage: dellemc/csm-authorization-sidecar:v1.10.0
 
       # proxyHost: hostname of the csm-authorization server
       # Default value: None
@@ -110,7 +118,7 @@ Create the karavi-authorization-config secret using this command:
 
     - Update the `image` to the image of the CSM Authorization sidecar. In most cases, you can leave the default value.
 
-    - Update the `PROXY_HOST` environment value to the hostname of the CSM Authorization Proxy Server.
+    - Update the `PROXY_HOST` environment value to the hostname of the CSM Authorization Proxy Server. `csm-authorization.com` is a placeholder for the proxyHost. See the administrator of CSM for Authorization for the correct value.
 
     - Update the `SKIP_CERTIFICATE_VALIDATION` environment value to `true` or `false` depending on if you want to disable or enable certificate validation of the CSM Authorization Proxy Server.
 
@@ -122,10 +130,10 @@ Create the karavi-authorization-config secret using this command:
       - name: authorization
         # enable: Enable/Disable csm-authorization
         enabled: true
-        configVersion: v1.9.0
+        configVersion: v1.10.0
         components:
         - name: karavi-authorization-proxy
-          image: dellemc/csm-authorization-sidecar:v1.9.0
+          image: dellemc/csm-authorization-sidecar:v1.10.0
           envs:
             # proxyHost: hostname of the csm-authorization server
             - name: "PROXY_HOST"

content/docs/authorization/configuration/powerscale/_index.md

@@ -56,7 +56,7 @@ kubectl -n isilon create secret generic karavi-authorization-config --from-file=
 
     **Helm**
 
-    Refer to the [Install the Driver](../../../csidriver/installation/helm/isilon/#install-the-driver) section to edit the parameters in `samples/secret/secret.yaml` file to configure the driver to communicate with the CSM Authorization sidecar.
+    Refer to the [Install the Driver](../../../deployment/helm/drivers/installation/isilon/#install-the-driver) section to edit the parameters to prepare the `samples/secret/secret.yaml` file to configure the driver to communicate with the CSM Authorization sidecar.
 
     - Update `endpoint` to match the localhost endpoint in `samples/secret/karavi-authorization-config.json`.
 
@@ -110,13 +110,13 @@ kubectl -n isilon create secret generic karavi-authorization-config --from-file=
 
     **Helm**
 
-    Refer to the [Install the Driver](../../../csidriver/installation/helm/isilon/#install-the-driver) section to edit the parameters in `my-isilon-settings.yaml` file to enable CSM Authorization.
+    Refer to the [Install the Driver](../../../deployment/helm/drivers/installation/isilon/#install-the-driver) section to edit the parameters in `my-isilon-settings.yaml` file to enable CSM Authorization.
 
     - Update `authorization.enabled` to `true`.
 
     - Update `images.authorization` to the image of the CSM Authorization sidecar. In most cases, you can leave the default value.
 
-    - Update `authorization.proxyHost` to the hostname of the CSM Authorization Proxy Server.
+    - Update `authorization.proxyHost` to the hostname of the CSM Authorization Proxy Server. `csm-authorization.com` is a placeholder for the proxyHost. See the administrator of CSM for Authorization for the correct value.
 
     - Update `authorization.skipCertificateValidation` to `true` or `false` depending on if you want to disable or enable certificate validation of the CSM Authorization Proxy Server.
 
@@ -127,8 +127,8 @@ kubectl -n isilon create secret generic karavi-authorization-config --from-file=
       enabled: true
 
       # sidecarProxyImage: the container image used for the csm-authorization-sidecar.
-      # Default value: dellemc/csm-authorization-sidecar:v1.9.0
-      sidecarProxyImage: dellemc/csm-authorization-sidecar:v1.9.0
+      # Default value: dellemc/csm-authorization-sidecar:v1.10.0
+      sidecarProxyImage: dellemc/csm-authorization-sidecar:v1.10.0
 
       # proxyHost: hostname of the csm-authorization server
       # Default value: None
@@ -152,7 +152,7 @@ kubectl -n isilon create secret generic karavi-authorization-config --from-file=
 
     - Update the `image` to the image of the CSM Authorization sidecar. In most cases, you can leave the default value.
 
-    - Update the `PROXY_HOST` environment value to the hostname of the CSM Authorization Proxy Server.
+    - Update the `PROXY_HOST` environment value to the hostname of the CSM Authorization Proxy Server. `csm-authorization.com` is a placeholder for the proxyHost. See the administrator of CSM for Authorization for the correct value.
 
     - Update the `SKIP_CERTIFICATE_VALIDATION` environment value to `true` or `false` depending on if you want to disable or enable certificate validation of the CSM Authorization Proxy Server.
 
@@ -162,10 +162,10 @@ kubectl -n isilon create secret generic karavi-authorization-config --from-file=
       - name: authorization
         # enable: Enable/Disable csm-authorization
         enabled: true
-        configVersion: v1.9.0
+        configVersion: v1.10.0
         components:
         - name: karavi-authorization-proxy
-          image: dellemc/csm-authorization-sidecar:v1.9.0
+          image: dellemc/csm-authorization-sidecar:v1.10.0
           envs:
             # proxyHost: hostname of the csm-authorization server
             - name: "PROXY_HOST"