Skip to content

DLPX-85175 upgrade kernel to better leverage bpftrace and BTF #33

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom
Closed
Parent: 6.0/stage
wants to merge 10,000 commits into from
Closed

DLPX-85175 upgrade kernel to better leverage bpftrace and BTF #33

wants to merge 10,000 commits into from

Conversation

@prakashsurya
Copy link
Contributor

No description provided.

baxeno and others added 30 commits February 1, 2023 15:04
@baxeno @smb49
USB: serial: cp210x: add Kamstrup RF sniffer PIDs
edc69f7 
BugLink: https://bugs.launchpad.net/bugs/2003139

commit e88906b upstream.

The RF sniffers are based on cp210x where the RF frontends
are based on a different USB stack.

RF sniffers can analyze packets meta data including power level
and perform packet injection.

Can be used to perform RF frontend self-test when connected to
a concentrator, ex. arch/arm/boot/dts/imx7d-flex-concentrator.dts

Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@jhovold @smb49
USB: serial: f81232: fix division by zero on line-speed change
5bb7c7f 
BugLink: https://bugs.launchpad.net/bugs/2003139

commit a08ca6e upstream.

The driver leaves the line speed unchanged in case a requested speed is
not supported. Make sure to handle the case where the current speed is
B0 (hangup) without dividing by zero when determining the clock source.

Fixes: 268ddb5 ("USB: serial: f81232: add high baud rate support")
Cc: stable@vger.kernel.org      # 5.2
Cc: Ji-Ze Hong (Peter Hong) <hpeter@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@jhovold @smb49
USB: serial: f81534: fix division by zero on line-speed change
5db694f 
BugLink: https://bugs.launchpad.net/bugs/2003139

commit 188c9c2 upstream.

The driver leaves the line speed unchanged in case a requested speed is
not supported. Make sure to handle the case where the current speed is
B0 (hangup) without dividing by zero when determining the clock source.

Fixes: 3aacac0 ("USB: serial: f81534: add high baud rate support")
Cc: stable@vger.kernel.org      # 4.16
Cc: Ji-Ze Hong (Peter Hong) <hpeter@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@smb49
xhci: Apply XHCI_RESET_TO_DEFAULT quirk to ADL-N
4f18882 
BugLink: https://bugs.launchpad.net/bugs/2003139

commit fed70b6 upstream.

ADL-N systems have the same issue as ADL-P, where a large boot firmware
delay is seen if USB ports are left in U3 at shutdown. So apply the
XHCI_RESET_TO_DEFAULT quirk to ADL-N as well.

This patch depends on commit 34cd2db ("xhci: Add quirk to reset
host back to default state at shutdown").

The issue it fixes is a ~20s boot time delay when booting from S5. It
affects ADL-N devices, and ADL-N support was added starting from v5.16.

Cc: stable@vger.kernel.org
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221130091944.2171610-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@anguy11 @smb49
igb: Initialize mailbox message for VF reset
2c4cb20 
BugLink: https://bugs.launchpad.net/bugs/2003139

commit de5dc44 upstream.

When a MAC address is not assigned to the VF, that portion of the message
sent to the VF is not set. The memory, however, is allocated from the
stack meaning that information may be leaked to the VM. Initialize the
message buffer to 0 so that no information is passed to the VM in this
case.

Fixes: 6ddbc4c ("igb: Indicate failure on vf reset for empty mac address")
Reported-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221212190031.3983342-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@shruthi-sanil @smb49
usb: dwc3: pci: Update PCIe device ID for USB3 controller on CPU sub-…
8b1b8a7 
…system for Raptor Lake

BugLink: https://bugs.launchpad.net/bugs/2003139

commit f05f80f upstream.

The device ID 0xa70e is defined for the USB3 device controller in the CPU
sub-system of Raptor Lake platform. Hence updating the ID accordingly.

Fixes: bad0d1d ("usb: dwc3: pci: Add support for Intel Raptor Lake")
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com>
Link: https://lore.kernel.org/r/20221125105327.27945-1-shruthi.sanil@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@JoseExposito @smb49
HID: uclogic: Add HID_QUIRK_HIDINPUT_FORCE quirk
dc8b5d6 
BugLink: https://bugs.launchpad.net/bugs/2003139

[ Upstream commit 3405a4b ]

Commit f7d8e38 ("HID: uclogic: Switch to Digitizer usage for
styluses") changed the usage used in UCLogic from "Pen" to "Digitizer".

However, the IS_INPUT_APPLICATION() macro evaluates to false for
HID_DG_DIGITIZER causing issues with the XP-Pen Star G640 tablet.

Add the HID_QUIRK_HIDINPUT_FORCE quirk to bypass the
IS_INPUT_APPLICATION() check.

Reported-by: Torge Matthies <openglfreak@googlemail.com>
Reported-by: Alexander Zhang <alex@alexyzhang.dev>
Tested-by: Alexander Zhang <alex@alexyzhang.dev>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@seehearfeel @smb49
selftests: net: Use "grep -E" instead of "egrep"
8e6441e 
BugLink: https://bugs.launchpad.net/bugs/2003139

[ Upstream commit 6a30d3e ]

The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
	egrep: warning: egrep is obsolescent; using grep -E
fix this using "grep -E" instead.

  sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/net`

Here are the steps to install the latest grep:

  wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
  tar xf grep-3.8.tar.gz
  cd grep-3.8 && ./configure && make
  sudo make install
  export PATH=/usr/local/bin:$PATH

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1669864248-829-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@Villemoes @smb49
net: loopback: use NET_NAME_PREDICTABLE for name_assign_type
a958803 
BugLink: https://bugs.launchpad.net/bugs/2003139

[ Upstream commit 31d929d ]

When the name_assign_type attribute was introduced (commit
685343f, "net: add name_assign_type netdev attribute"), the
loopback device was explicitly mentioned as one which would make use
of NET_NAME_PREDICTABLE:

    The name_assign_type attribute gives hints where the interface name of a
    given net-device comes from. These values are currently defined:
...
      NET_NAME_PREDICTABLE:
        The ifname has been assigned by the kernel in a predictable way
        that is guaranteed to avoid reuse and always be the same for a
        given device. Examples include statically created devices like
        the loopback device [...]

Switch to that so that reading /sys/class/net/lo/name_assign_type
produces something sensible instead of returning -EINVAL.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@gregkh @smb49
Linux 5.15.85
19d550b 
BugLink: https://bugs.launchpad.net/bugs/2003139

Link: https://lore.kernel.org/r/20221219182940.739981110@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Slade Watkins <srw@sladewatkins.net>
Tested-by: Ron Economos <re@w6rz.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@kamalmostafa @smb49
UBUNTU: Upstream stable to v5.15.85
32c3576 
BugLink: https://bugs.launchpad.net/bugs/2003139

Ignore: yes
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@ummakynes @smb49
netfilter: nft_payload: incorrect arithmetics when fetching VLAN head…
b678a16 
…er bits

If the offset + length goes over the ethernet + vlan header, then the
length is adjusted to copy the bytes that are within the boundaries of
the vlan_ethhdr scratchpad area. The remaining bytes beyond ethernet +
vlan header are copied directly from the skbuff data area.

Fix incorrect arithmetic operator: subtract, not add, the size of the
vlan header in case of double-tagged packets to adjust the length
accordingly to address CVE-2023-0179.

Reported-by: Davide Ornaghi <d.ornaghi97@gmail.com>
Fixes: f6ae9f1 ("netfilter: nft_payload: add C-VLAN support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
(cherry picked from commit 696e1a4 net.git)
CVE-2023-0179
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Acked-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
@smb49
net/ulp: prevent ULP without clone op from entering the LISTEN status
2c34aed 
When an ULP-enabled socket enters the LISTEN status, the listener ULP data
pointer is copied inside the child/accepted sockets by sk_clone_lock().

The relevant ULP can take care of de-duplicating the context pointer via
the clone() operation, but only MPTCP and SMC implement such op.

Other ULPs may end-up with a double-free at socket disposal time.

We can't simply clear the ULP data at clone time, as TLS replaces the
socket ops with custom ones assuming a valid TLS ULP context is
available.

Instead completely prevent clone-less ULP sockets from entering the
LISTEN status.

Fixes: 734942c ("tcp: ULP infrastructure")
Reported-by: slipper <slipper.alive@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/4b80c3d1dbe3d0ab072f80450c202d9bc88b4b03.1672740602.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(backported from commit 2c02d41)
[cascardo: there is no SOCK_SUPPORT_ZC]
[cascardo: backlog parameter on inet_csk_listen_start was removed]
CVE-2023-0461
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Acked-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
@smb49
net/ulp: use consistent error code when blocking ULP
31c2ad4 
The referenced commit changed the error code returned by the kernel
when preventing a non-established socket from attaching the ktls
ULP. Before to such a commit, the user-space got ENOTCONN instead
of EINVAL.

The existing self-tests depend on such error code, and the change
caused a failure:

  RUN           global.non_established ...
 tls.c:1673:non_established:Expected errno (22) == ENOTCONN (107)
 non_established: Test failed at step #3
          FAIL  global.non_established

In the unlikely event existing applications do the same, address
the issue by restoring the prior error code in the above scenario.

Note that the only other ULP performing similar checks at init
time - smc_ulp_ops - also fails with ENOTCONN when trying to attach
the ULP to a non-established socket.

Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Fixes: 2c02d41 ("net/ulp: prevent ULP without clone op from entering the LISTEN status")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/7bb199e7a93317fb6f8bf8b9b2dc71c18f337cde.1674042685.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(backported from commit 8ccc993)
[cascardo: there is no SOCK_SUPPORT_ZC]
CVE-2023-0461
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Acked-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
@daimngo @smb49
NFSD: fix use-after-free in __nfs42_ssc_open()
e549585 
Problem caused by source's vfsmount being unmounted but remains
on the delayed unmount list. This happens when nfs42_ssc_open()
return errors.

Fixed by removing nfsd4_interssc_connect(), leave the vfsmount
for the laundromat to unmount when idle time expires.

We don't need to call nfs_do_sb_deactive when nfs42_ssc_open
return errors since the file was not opened so nfs_server->active
was not incremented. Same as in nfsd4_copy, if we fail to
launch nfsd4_do_async_copy thread then there's no need to
call nfs_do_sb_deactive

Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Tested-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

CVE-2022-20369
(backported from commit 75333d4)
[agherzan: 1913cdf replaces the boolean
fields in nfsd4_copy which now needs adaptations for this patch to use
nfsd4_ssc_is_inter, for the nfsd4_do_async_copy conflict there are
multiple changes affecting the backport but the code path is simple to
adapt for handling the nfsd4_interssc_disconnect call]
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Acked-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@smb49
ALSA: hda/cirrus: Add extra 10 ms delay to allow PLL settle and lock.
65006af 
BugLink: https://launchpad.net/bugs/1998905

New HW platforms with multiple CS42L42 parts, faster CPU and i2c
requre some extra delay to allow PLL to settle and lock. Adding
extra 10ms delay.

Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221205145713.23852-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
(cherry picked from commit 9fb9fa1)
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Acked-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@leungmartin @smb49
drm/amd/display: Manually adjust strobe for DCN303
7009b73 
BugLink: https://bugs.launchpad.net/bugs/2000299

why:
DCN303's 4 channel SOC BB causes problems at strobe

how:
workaround to manually adjust strobe calculation using FCLK
restrict.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

(cherry picked from commit a9a1ac4)
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Acked-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@smb49
NFS: Clear the file access cache upon login
2cbb606 
BugLink: https://bugs.launchpad.net/bugs/2003053

POSIX typically only refreshes the user's supplementary group
information upon login. Since NFS servers may often refresh their
concept of the user supplementary group membership at their own cadence,
it is possible for the NFS client's access cache to become stale due to
the user's group membership changing on the server after the user has
already logged in on the client.
While it is reasonable to expect that such group membership changes are
rare, and that we do not want to optimise the cache to accommodate them,
it is also not unreasonable for the user to expect that if they log out
and log back in again, that the staleness would clear up.

Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

(backported from commit 0eb4381)
Signed-off-by: Chengen Du <chengen.du@canonical.com>
Acked-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@yukariatlas @smb49
NFS: Judge the file access cache's timestamp in rcu path
bcf920d 
BugLink: https://bugs.launchpad.net/bugs/2003053

If the user's login time is newer than the cache's timestamp,
we expect the cache may be stale and need to clear.
The stale cache will remain in the list's tail if no other
users operate on that inode.
Once the user accesses the inode, the stale cache will be
returned in rcu path.

Signed-off-by: Chengen Du <chengen.du@canonical.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

(cherry picked from commit 029085b)
Signed-off-by: Chengen Du <chengen.du@canonical.com>
Acked-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@smb49
NFS: Fix up a sparse warning
f391395 
BugLink: https://bugs.launchpad.net/bugs/2003053

sparse is warning about an incorrect RCU dereference.
fs/nfs/dir.c:2965:56: warning: incorrect type in argument 1 (different address spaces)
fs/nfs/dir.c:2965:56:    expected struct cred const *
fs/nfs/dir.c:2965:56:    got struct cred const [noderef] __rcu *const cred

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

(cherry picked from commit 5e9a7b9)
Signed-off-by: Chengen Du <chengen.du@canonical.com>
Acked-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@smb49
UBUNTU: link-to-tracker: update tracking bug
4c71df0 
BugLink: https://bugs.launchpad.net/bugs/2004344
Properties: no-test-build
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@smb49
UBUNTU: debian/dkms-versions -- update from kernel-versions (main/202…
1cbcefa 
…3.01.30)

BugLink: https://bugs.launchpad.net/bugs/1786013
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@smb49
UBUNTU: Ubuntu-5.15.0-65.72
b60581d 
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@smb49
UBUNTU: Start new release
1ff399d 
Ignore: yes
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@smb49
UBUNTU: SAUCE: Fix inet_csk_listen_start after CVE-2023-0461
2dd9a20 
When adding "net/ulp: prevent ULP without clone op from entering the
LISTEN status" code which changed the error code variable was added.
However, without a different v6.2 change which lets ->get_port() return
a proper errno, we rely on the pre-set value or the error variable.
Adding this right before the call to make it clear where it is needed.

CVE-2023-0461
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Andy Whitcroft <andy.whitcroft@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@smb49
UBUNTU: link-to-tracker: update tracking bug
324c90a 
BugLink: https://bugs.launchpad.net/bugs/2004636
Properties: no-test-build
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@smb49
UBUNTU: Ubuntu-5.15.0-66.73
5add972 
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@rtg-canonical
UBUNTU: [Packaging] aws: Initial 5.15 packaging
732bf80 
Ignore:yes

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
@rtg-canonical
UBUNTU: [Packaging] Ignore initial ABI
3775bac 
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
@andraprs @rtg-canonical
nitro_enclaves: Enable Arm64 support
150a0a8 
BugLink: https://bugs.launchpad.net/bugs/1951873

Update the kernel config to enable the Nitro Enclaves kernel driver for
Arm64 support.

Reviewed-by: George-Aurelian Popescu <popegeo@amazon.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20210827154930.40608-2-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit f7e55f0)
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
rtg-canonical and others added 20 commits February 11, 2023 08:17
@rtg-canonical
UBUNTU: Ubuntu-aws-5.15-5.15.0-1029.33~20.04.1
e416149 
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
@smb49 @rtg-canonical
UBUNTU: Start new release
b384b5b 
Ignore: yes
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@smb49 @rtg-canonical
UBUNTU: link-to-tracker: update tracking bug
89b62f0 
BugLink: https://bugs.launchpad.net/bugs/2003487
Properties: no-test-build
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@smb49 @rtg-canonical
UBUNTU: Ubuntu-aws-5.15-5.15.0-1030.34~20.04.1
ad1612b 
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
@rtg-canonical
UBUNTU: Start new release
2942a1b 
Ignore: yes
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
@rtg-canonical
UBUNTU: link-to-tracker: update tracking bug
943d6df 
BugLink: https://bugs.launchpad.net/bugs/2004304
Properties: no-test-build
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
@rtg-canonical
UBUNTU: Ubuntu-aws-5.15-5.15.0-1031.35~20.04.1
f05ae85 
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
@@DELPHIX_PATCHSET_START@@
b283920 
This is a placeholder commit to separate the Ubuntu kernel source and
our patches. Used by kernel_merge_with_upstream() in the linux-pkg repo.
@pzakha
DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …
a66f72b 
…messages (#2)
DLPX-74216 nfs-server restarts fail when order-5 allocations are exha…
ae3e534 
…usted (#3)
@pzakha
DLPX-72065 Aborted iSCSI command never completes after LUN reset (#4)
26eae8a
DLPX-75524 avoid unnecessary nfserr_jukebox returns from nfsd_file_ac…
ff7c2b2 
…quire (#8)

Upstream fix from kernel 5.12
nfsd: Don't keep looking up unhashed files in the nfsd file cache

If a file is unhashed, then we're going to reject it anyway and retry,
so make sure we skip it when we're doing the RCU lockless lookup.
This avoids a number of unnecessary nfserr_jukebox returns from
nfsd_file_acquire()

Fixes: 65294c1 ("nfsd: add a new struct file caching facility to nfsd")
DLPX-82827 Fix for Solaris NFSv4 client mounts (#19)
32f1e83
DLPX-83442 Disable various kernel modules which we don't use (#20)
3a5dcb2
TOOL-16649 CONFIG_MD is needed on the buildserver (#22)
f046c48
@pcd1193182
target: login should wait until tx/rx threads have properly started. (#…
e251563 
…21)
DLPX-83701 Make function mnt_add_count() traceable (#24)
2ede072
DLPX-84469 Users unable to connect to CIFS mounts (#28)
5d4b42f
DLPX-84907 CVE-2022-3628 (#29)
15a2788
@sdimitro
DLPX-84985 target: iscsi: fix deadlock in the iSCSI login code (#30)
54a355d 
PR URL: https://www.github.com/delphix/linux-kernel-aws/pull/33
@prakashsurya prakashsurya force-pushed the dlpx/pr/prakashsurya/d6e37d82-4f91-47b6-8354-517d7087ac92 branch from 00ab811 to 54a355d Compare March 14, 2023 17:59
@prakashsurya prakashsurya changed the title DLPX-84985 target: iscsi: fix deadlock in the iSCSI login code (#30) DLPX-85175 upgrade kernel to better leverage bpftrace and BTF Mar 14, 2023
@prakashsurya prakashsurya changed the base branch from projects/upstreams/projects/kernel-upgrade to 6.0/stage March 14, 2023 18:05
don-brady
don-brady reviewed Mar 14, 2023
View reviewed changes
fs/nfsd/filecache.c
Copy link

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

looks like the real fix came in with 5.12.0 kernel. We don't need to carry this commit as it is only logging that we added in case the issue resurfaced but it hasn't so we can drop this commit.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Reviewers

1 more reviewer

@don-brady don-brady don-brady left review comments

Reviewers whose approvals may not affect merge requirements

Assignees

No one assigned

Labels

None yet

Milestone

No milestone

Development

Successfully merging this pull request may close these issues.