Bump the docker group with 2 updates

[dependabot]

Bumps the docker group with 2 updates: github.com/docker/docker and github.com/moby/moby.

Updates github.com/docker/docker from 26.1.4+incompatible to 27.0.0+incompatible

Release notes

Sourced from github.com/docker/docker's releases.

v27.0.0-rc.1

27.0.0-rc.1

For a full list of pull requests and changes in this release, refer to the relevant GitHub milestones:

• docker/cli, 27.0.0 milestone
• moby/moby, 27.0.0 milestone
• Deprecated and removed features, see Deprecated Features.
• Changes to the Engine API, see API version history.

New

• Add support to docker stack deploy for driver_opts in a service's networks. docker/cli#5125
• containerd image store: Add --platform flag to docker image push and improve the default behavior when not all platforms of the multi-platform image are available locally. docker/cli#4984, moby/moby#47679

Bug fixes and enhancements

• Fix a bug causing the docker CLI to leak UNIX sockets in $TMPDIR in some cases. docker/cli#5146
• Don't ignore a custom seccomp profile when used in conjunction with --privileged moby/moby#47500
• rootless: overlay2: support native overlay diff when using rootless-mode in kernel 5.11 and above moby/moby#47605
• Fix the StartInterval default value of healthcheck to reflect the documented value of 5s. moby/moby#47799
• Allow sysctls to be set per-interface during container creation and network connection. moby/moby#47686
• A ULA base prefix is automatically added to default-address-pools if this parameter wasn't manually configured, or if it contains no IPv6 prefixes. This ULA prefix is derived from the Engine host ID such that it's unique across hosts and over time. moby/moby#47853
• Enable ip6tables by default, it is no longer --experimental. moby/moby#47747
• Introduce a new subnet allocator that can deal with IPv6 address pools of any size moby/moby#47768
• For IPv6-enabled bridge networks, do not attempt to replace the bridge's kernel-assigned link local address with fe80::1. moby/moby#47787
• Fix docker save and docker load not ending on the daemon side when the operation was cancelled (eg. Ctrl+C) moby/moby#47629
• Container's StartedAt property is now recorded before container startup, guaranteeing that the StartedAt is always before FinishedAt. moby/moby#47003
• Run an internal resolver on the default bridge network to forward DNS requests to external resolvers, even if they are on localhost addresses, or IPv6 addresses when the default bridge does not have IPv6 connectivity. To preserve existing behavior, the internal resolver on the default bridge will not resolve container names, unlike the resolver on user-defined networks. Do not use Google's DNS servers as a fallback when no external DNS servers are supplied in configuration via --dns or available from the host's resolv.conf. moby/moby#47602
• If firewalld is running on the host, create policy docker-forwarding to allow forwarding from any zone to the docker zone. This makes it possible to configure a bridge network with a routable IPv6 address, and no masquerading. moby/moby#47745
• IPv6 can now be enabled by default on all custom networks using dockerd --default-network-opt=bridge=com.docker.network.enable_ipv6=true (and the matching json option). moby/moby#47867
• The internal DNS resolver used by Windows containers on Windows will now forward requests to external DNS servers by-default, this enables nslookup to resolve external hostnames. This behaviour can be disabled via daemon.json, using "features": { "windows-dns-proxy": false }, the feature flag will be removed in a future release. moby/moby#47826
• Document the use of driver-opt in the CLI for setting per-interface sysctls. docker/cli#4994
• Print a warning when the CLI does not have permissions to read the configuration file. docker/cli#5077

API

• containerd image store: POST /images/{name}/push now supports a platform parameter (JSON encoded OCI Platform type) that allows selecting a specific platform-manifest from the multi-platform image. This is experimental and may change in future API versions. moby/moby#47679
• ContainerList api returns container annotations. moby/moby#47866
• Deprecate the daemon flag --api-cors-header and the corresponding daemon.json config param. These will be removed in the next major release. moby/moby#45313
• Client API callback functions client.RequestPrivilegeFunc, client.ImageSearchOptions.AcceptPermissionsFunc and image.ImportOptions.PrivilegeFunc now require a context parameter. moby/moby#47536
• Remove deprecated ImageImportOptions, ImageCreateOptions, ImagePullOptions, ImagePushOptions, ImageListOptions, ImageRemoveOptions aliases for Image types. moby/moby#47900
• Move ExecConfig, ContainerExecInspect, ContainersPruneReport, ContainerPathStat, CopyToContainerOptions, ExecStartCheck and ContainerStats to api/types/container; ImagesPruneReport, ImageImportSource and ImageLoadResponse to api/types/image; ExecStartOptions to api/types/backend; VolumesPruneReport to api/types/volume; EventsOptions to api/types/events; ImageSearchOptions to api/types/registry. moby/moby#47936
• Deprecate non-standard (config) fields in image inspect output. The Config field returned by this endpoint (used for "image inspect") returned additional fields that are not part of the image's configuration and not part of the [Docker Image Spec] and the [OCI Image Spec]. These fields are never set (and always return the default value for the type), but are not omitted in the response when left empty. As these fields were not intended to be part of the image configuration response, they are deprecated, and will be removed in the future API versions. The following fields are currently included in the API response, but are not part of the underlying image's Config, and deprecated:
  • Hostname

... (truncated)

Commits

• See full diff in compare view

Updates github.com/moby/moby from 26.1.4+incompatible to 27.0.0+incompatible

Release notes

Sourced from github.com/moby/moby's releases.

v27.0.0-rc.1

27.0.0-rc.1

For a full list of pull requests and changes in this release, refer to the relevant GitHub milestones:

• docker/cli, 27.0.0 milestone
• moby/moby, 27.0.0 milestone
• Deprecated and removed features, see Deprecated Features.
• Changes to the Engine API, see API version history.

New

• Add support to docker stack deploy for driver_opts in a service's networks. docker/cli#5125
• containerd image store: Add --platform flag to docker image push and improve the default behavior when not all platforms of the multi-platform image are available locally. docker/cli#4984, moby/moby#47679

Bug fixes and enhancements

• Fix a bug causing the docker CLI to leak UNIX sockets in $TMPDIR in some cases. docker/cli#5146
• Don't ignore a custom seccomp profile when used in conjunction with --privileged moby/moby#47500
• rootless: overlay2: support native overlay diff when using rootless-mode in kernel 5.11 and above moby/moby#47605
• Fix the StartInterval default value of healthcheck to reflect the documented value of 5s. moby/moby#47799
• Allow sysctls to be set per-interface during container creation and network connection. moby/moby#47686
• A ULA base prefix is automatically added to default-address-pools if this parameter wasn't manually configured, or if it contains no IPv6 prefixes. This ULA prefix is derived from the Engine host ID such that it's unique across hosts and over time. moby/moby#47853
• Enable ip6tables by default, it is no longer --experimental. moby/moby#47747
• Introduce a new subnet allocator that can deal with IPv6 address pools of any size moby/moby#47768
• For IPv6-enabled bridge networks, do not attempt to replace the bridge's kernel-assigned link local address with fe80::1. moby/moby#47787
• Fix docker save and docker load not ending on the daemon side when the operation was cancelled (eg. Ctrl+C) moby/moby#47629
• Container's StartedAt property is now recorded before container startup, guaranteeing that the StartedAt is always before FinishedAt. moby/moby#47003
• Run an internal resolver on the default bridge network to forward DNS requests to external resolvers, even if they are on localhost addresses, or IPv6 addresses when the default bridge does not have IPv6 connectivity. To preserve existing behavior, the internal resolver on the default bridge will not resolve container names, unlike the resolver on user-defined networks. Do not use Google's DNS servers as a fallback when no external DNS servers are supplied in configuration via --dns or available from the host's resolv.conf. moby/moby#47602
• If firewalld is running on the host, create policy docker-forwarding to allow forwarding from any zone to the docker zone. This makes it possible to configure a bridge network with a routable IPv6 address, and no masquerading. moby/moby#47745
• IPv6 can now be enabled by default on all custom networks using dockerd --default-network-opt=bridge=com.docker.network.enable_ipv6=true (and the matching json option). moby/moby#47867
• The internal DNS resolver used by Windows containers on Windows will now forward requests to external DNS servers by-default, this enables nslookup to resolve external hostnames. This behaviour can be disabled via daemon.json, using "features": { "windows-dns-proxy": false }, the feature flag will be removed in a future release. moby/moby#47826
• Document the use of driver-opt in the CLI for setting per-interface sysctls. docker/cli#4994
• Print a warning when the CLI does not have permissions to read the configuration file. docker/cli#5077

API

• containerd image store: POST /images/{name}/push now supports a platform parameter (JSON encoded OCI Platform type) that allows selecting a specific platform-manifest from the multi-platform image. This is experimental and may change in future API versions. moby/moby#47679
• ContainerList api returns container annotations. moby/moby#47866
• Deprecate the daemon flag --api-cors-header and the corresponding daemon.json config param. These will be removed in the next major release. moby/moby#45313
• Client API callback functions client.RequestPrivilegeFunc, client.ImageSearchOptions.AcceptPermissionsFunc and image.ImportOptions.PrivilegeFunc now require a context parameter. moby/moby#47536
• Remove deprecated ImageImportOptions, ImageCreateOptions, ImagePullOptions, ImagePushOptions, ImageListOptions, ImageRemoveOptions aliases for Image types. moby/moby#47900
• Move ExecConfig, ContainerExecInspect, ContainersPruneReport, ContainerPathStat, CopyToContainerOptions, ExecStartCheck and ContainerStats to api/types/container; ImagesPruneReport, ImageImportSource and ImageLoadResponse to api/types/image; ExecStartOptions to api/types/backend; VolumesPruneReport to api/types/volume; EventsOptions to api/types/events; ImageSearchOptions to api/types/registry. moby/moby#47936
• Deprecate non-standard (config) fields in image inspect output. The Config field returned by this endpoint (used for "image inspect") returned additional fields that are not part of the image's configuration and not part of the [Docker Image Spec] and the [OCI Image Spec]. These fields are never set (and always return the default value for the type), but are not omitted in the response when left empty. As these fields were not intended to be part of the image configuration response, they are deprecated, and will be removed in the future API versions. The following fields are currently included in the API response, but are not part of the underlying image's Config, and deprecated:
  • Hostname

... (truncated)

Commits

• See full diff in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
• @dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
• @dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
• @dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
• @dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions

[dependabot]

Looks like these dependencies are updatable in another way, so this is no longer needed.