balancer: automatically stop producers on subchannel state changes

balancer/balancer.go

@@ -142,8 +142,11 @@ type SubConn interface {
 	Connect()
 	// GetOrBuildProducer returns a reference to the existing Producer for this
 	// ProducerBuilder in this SubConn, or, if one does not currently exist,
-	// creates a new one and returns it.  Returns a close function which must
-	// be called when the Producer is no longer needed.
+	// creates a new one and returns it.  Returns a close function which may be
+	// called when the Producer is no longer needed.  Otherwise the producer
+	// will automatically be closed upon connection loss or subchannel close.
+	// Should only be called on a SubConn in state Ready.  Otherwise the
+	// producer will be unable to create streams.
 	GetOrBuildProducer(ProducerBuilder) (p Producer, close func())
 	// Shutdown shuts down the SubConn gracefully.  Any started RPCs will be
 	// allowed to complete.  No future calls should be made on the SubConn.
@@ -452,8 +455,10 @@ type ProducerBuilder interface {
 	// Build creates a Producer.  The first parameter is always a
 	// grpc.ClientConnInterface (a type to allow creating RPCs/streams on the
 	// associated SubConn), but is declared as `any` to avoid a dependency
-	// cycle.  Should also return a close function that will be called when all
-	// references to the Producer have been given up.
+	// cycle.  Build also returns a close function that will be called when all
+	// references to the Producer have been given up for a SubConn, or when a
+	// connectivity state change occurs on the SubConn.  The close function
+	// should always block until all asynchronous cleanup work is completed.
 	Build(grpcClientConnInterface any) (p Producer, close func())
 }
 

balancer/weightedroundrobin/balancer.go

@@ -526,17 +526,21 @@ func (w *weightedSubConn) updateConfig(cfg *lbConfig) {
 	w.cfg = cfg
 	w.mu.Unlock()
 
-	newPeriod := cfg.OOBReportingPeriod
 	if cfg.EnableOOBLoadReport == oldCfg.EnableOOBLoadReport &&
-		newPeriod == oldCfg.OOBReportingPeriod {
+		cfg.OOBReportingPeriod == oldCfg.OOBReportingPeriod {
 		// Load reporting wasn't enabled before or after, or load reporting was
 		// enabled before and after, and had the same period.  (Note that with
 		// load reporting disabled, OOBReportingPeriod is always 0.)
 		return
 	}
-	// (Optionally stop and) start the listener to use the new config's
-	// settings for OOB reporting.
+	if w.connectivityState == connectivity.Ready {
+		// (Re)start the listener to use the new config's settings for OOB
+		// reporting.
+		w.updateORCAListener(cfg)
+	}
+}
 
+func (w *weightedSubConn) updateORCAListener(cfg *lbConfig) {
 	if w.stopORCAListener != nil {
 		w.stopORCAListener()
 	}
@@ -545,9 +549,9 @@ func (w *weightedSubConn) updateConfig(cfg *lbConfig) {
 		return
 	}
 	if w.logger.V(2) {
-		w.logger.Infof("Registering ORCA listener for %v with interval %v", w.SubConn, newPeriod)
+		w.logger.Infof("Registering ORCA listener for %v with interval %v", w.SubConn, cfg.OOBReportingPeriod)
 	}
-	opts := orca.OOBListenerOptions{ReportInterval: time.Duration(newPeriod)}
+	opts := orca.OOBListenerOptions{ReportInterval: time.Duration(cfg.OOBReportingPeriod)}
 	w.stopORCAListener = orca.RegisterOOBListener(w.SubConn, w, opts)
 }
 
@@ -569,11 +573,9 @@ func (w *weightedSubConn) updateConnectivityState(cs connectivity.State) connect
 		w.mu.Lock()
 		w.nonEmptySince = time.Time{}
 		w.lastUpdated = time.Time{}
+		cfg := w.cfg
 		w.mu.Unlock()
-	case connectivity.Shutdown:
-		if w.stopORCAListener != nil {
-			w.stopORCAListener()
-		}
+		w.updateORCAListener(cfg)
 	}
 
 	oldCS := w.connectivityState

balancer_wrapper.go

@@ -256,17 +256,20 @@ type acBalancerWrapper struct {
 	ccb           *ccBalancerWrapper // read-only
 	stateListener func(balancer.SubConnState)
 
-	mu        sync.Mutex
-	producers map[balancer.ProducerBuilder]*refCountedProducer
+	producersMu sync.Mutex
+	producers   map[balancer.ProducerBuilder]*refCountedProducer
 }
 
 // updateState is invoked by grpc to push a subConn state update to the
 // underlying balancer.
-func (acbw *acBalancerWrapper) updateState(s connectivity.State, curAddr resolver.Address, err error, readyChan chan struct{}) {
+func (acbw *acBalancerWrapper) updateState(s connectivity.State, curAddr resolver.Address, err error) {
 	acbw.ccb.serializer.TrySchedule(func(ctx context.Context) {
 		if ctx.Err() != nil || acbw.ccb.balancer == nil {
 			return
 		}
+		// Invalidate all producers on any state change.
+		acbw.closeProducers()
+
 		// Even though it is optional for balancers, gracefulswitch ensures
 		// opts.StateListener is set, so this cannot ever be nil.
 		// TODO: delete this comment when UpdateSubConnState is removed.
@@ -275,15 +278,6 @@ func (acbw *acBalancerWrapper) updateState(s connectivity.State, curAddr resolve
 			setConnectedAddress(&scs, curAddr)
 		}
 		acbw.stateListener(scs)
-		acbw.ac.mu.Lock()
-		defer acbw.ac.mu.Unlock()
-		if s == connectivity.Ready {
-			// When changing states to READY, close stateReadyChan.  Wait until
-			// after we notify the LB policy's listener(s) in order to prevent
-			// ac.getTransport() from unblocking before the LB policy starts
-			// tracking the subchannel as READY.
-			close(readyChan)
-		}
 	})
 }
 
@@ -300,14 +294,15 @@ func (acbw *acBalancerWrapper) Connect() {
 }
 
 func (acbw *acBalancerWrapper) Shutdown() {
+	acbw.closeProducers()
 	acbw.ccb.cc.removeAddrConn(acbw.ac, errConnDrain)
 }
 
 // NewStream begins a streaming RPC on the addrConn.  If the addrConn is not
 // ready, blocks until it is or ctx expires.  Returns an error when the context
 // expires or the addrConn is shut down.
 func (acbw *acBalancerWrapper) NewStream(ctx context.Context, desc *StreamDesc, method string, opts ...CallOption) (ClientStream, error) {
-	transport, err := acbw.ac.getTransport(ctx)
+	transport, err := acbw.ac.getTransport()
 	if err != nil {
 		return nil, err
 	}
@@ -334,8 +329,8 @@ type refCountedProducer struct {
 }
 
 func (acbw *acBalancerWrapper) GetOrBuildProducer(pb balancer.ProducerBuilder) (balancer.Producer, func()) {
-	acbw.mu.Lock()
-	defer acbw.mu.Unlock()
+	acbw.producersMu.Lock()
+	defer acbw.producersMu.Unlock()
 
 	// Look up existing producer from this builder.
 	pData := acbw.producers[pb]
@@ -352,13 +347,23 @@ func (acbw *acBalancerWrapper) GetOrBuildProducer(pb balancer.ProducerBuilder) (
 	// and delete the refCountedProducer from the map if the total reference
 	// count goes to zero.
 	unref := func() {
-		acbw.mu.Lock()
+		acbw.producersMu.Lock()
 		pData.refs--
 		if pData.refs == 0 {
 			defer pData.close() // Run outside the acbw mutex
 			delete(acbw.producers, pb)
 		}
-		acbw.mu.Unlock()
+		acbw.producersMu.Unlock()
 	}
 	return pData.producer, grpcsync.OnceFunc(unref)
 }
+
+func (acbw *acBalancerWrapper) closeProducers() {
+	acbw.producersMu.Lock()
+	defer acbw.producersMu.Unlock()
+	for pb, pData := range acbw.producers {
+		pData.refs = 0
+		pData.close()
+		delete(acbw.producers, pb)
+	}
+}

clientconn.go

@@ -825,14 +825,13 @@ func (cc *ClientConn) newAddrConnLocked(addrs []resolver.Address, opts balancer.
 	}
 
 	ac := &addrConn{
-		state:          connectivity.Idle,
-		cc:             cc,
-		addrs:          copyAddresses(addrs),
-		scopts:         opts,
-		dopts:          cc.dopts,
-		channelz:       channelz.RegisterSubChannel(cc.channelz, ""),
-		resetBackoff:   make(chan struct{}),
-		stateReadyChan: make(chan struct{}),
+		state:        connectivity.Idle,
+		cc:           cc,
+		addrs:        copyAddresses(addrs),
+		scopts:       opts,
+		dopts:        cc.dopts,
+		channelz:     channelz.RegisterSubChannel(cc.channelz, ""),
+		resetBackoff: make(chan struct{}),
 	}
 	ac.ctx, ac.cancel = context.WithCancel(cc.ctx)
 	// Start with our address set to the first address; this may be updated if
@@ -1179,8 +1178,7 @@ type addrConn struct {
 	addrs   []resolver.Address // All addresses that the resolver resolved to.
 
 	// Use updateConnectivityState for updating addrConn's connectivity state.
-	state          connectivity.State
-	stateReadyChan chan struct{} // closed and recreated on every READY state change.
+	state connectivity.State
 
 	backoffIdx   int // Needs to be stateful for resetConnectBackoff.
 	resetBackoff chan struct{}
@@ -1193,22 +1191,14 @@ func (ac *addrConn) updateConnectivityState(s connectivity.State, lastErr error)
 	if ac.state == s {
 		return
 	}
-	if ac.state == connectivity.Ready {
-		// When leaving ready, re-create the ready channel.
-		ac.stateReadyChan = make(chan struct{})
-	}
-	if s == connectivity.Shutdown {
-		// Wake any producer waiting to create a stream on the transport.
-		close(ac.stateReadyChan)
-	}
 	ac.state = s
 	ac.channelz.ChannelMetrics.State.Store(&s)
 	if lastErr == nil {
 		channelz.Infof(logger, ac.channelz, "Subchannel Connectivity change to %v", s)
 	} else {
 		channelz.Infof(logger, ac.channelz, "Subchannel Connectivity change to %v, last error: %s", s, lastErr)
 	}
-	ac.acbw.updateState(s, ac.curAddr, lastErr, ac.stateReadyChan)
+	ac.acbw.updateState(s, ac.curAddr, lastErr)
 }
 
 // adjustParams updates parameters used to create transports upon
@@ -1515,26 +1505,16 @@ func (ac *addrConn) getReadyTransport() transport.ClientTransport {
 // getTransport waits until the addrconn is ready and returns the transport.
 // If the context expires first, returns an appropriate status.  If the
 // addrConn is stopped first, returns an Unavailable status error.
-func (ac *addrConn) getTransport(ctx context.Context) (transport.ClientTransport, error) {
-	for ctx.Err() == nil {
-		ac.mu.Lock()
-		t, state, readyChan := ac.transport, ac.state, ac.stateReadyChan
-		ac.mu.Unlock()
-		if state == connectivity.Shutdown {
-			// Return an error immediately in only this case since a connection
-			// will never occur.
-			return nil, status.Errorf(codes.Unavailable, "SubConn shutting down")
-		}
+func (ac *addrConn) getTransport() (transport.ClientTransport, error) {
+	ac.mu.Lock()
+	t, state := ac.transport, ac.state
+	ac.mu.Unlock()
 
-		select {
-		case <-ctx.Done():
-		case <-readyChan:
-			if state == connectivity.Ready {
-				return t, nil
-			}
-		}
+	if state != connectivity.Ready {
+		return nil, status.Errorf(codes.Unavailable, "SubConn state is %v; not Ready", state)
 	}
-	return nil, status.FromContextError(ctx.Err()).Err()
+
+	return t, nil
 }
 
 // tearDown starts to tear down the addrConn.

orca/producer.go

@@ -46,6 +46,12 @@ func (*producerBuilder) Build(cci any) (balancer.Producer, func()) {
 		backoff:   internal.DefaultBackoffFunc,
 	}
 	return p, func() {
+		p.mu.Lock()
+		if p.stop != nil {
+			p.stop()
+			p.stop = nil
+		}
+		p.mu.Unlock()
 		<-p.stopped
 	}
 }
@@ -67,19 +73,16 @@ type OOBListenerOptions struct {
 	ReportInterval time.Duration
 }
 
-// RegisterOOBListener registers an out-of-band load report listener on sc.
-// Any OOBListener may only be registered once per subchannel at a time.  The
-// returned stop function must be called when no longer needed.  Do not
+// RegisterOOBListener registers an out-of-band load report listener on a Ready
+// sc.  Any OOBListener may only be registered once per subchannel at a time.
+// The returned stop function must be called when no longer needed.  Do not
 // register a single OOBListener more than once per SubConn.
 func RegisterOOBListener(sc balancer.SubConn, l OOBListener, opts OOBListenerOptions) (stop func()) {
 	pr, closeFn := sc.GetOrBuildProducer(producerBuilderSingleton)
 	p := pr.(*producer)
 
 	p.registerListener(l, opts.ReportInterval)
 
-	// TODO: When we can register for SubConn state updates, automatically call
-	// stop() on SHUTDOWN.
-
 	// If stop is called multiple times, prevent it from having any effect on
 	// subsequent calls.
 	return grpcsync.OnceFunc(func() {
@@ -96,13 +99,13 @@ type producer struct {
 	// is incremented when stream errors occur and is reset when the stream
 	// reports a result.
 	backoff func(int) time.Duration
+	stopped chan struct{} // closed when the run goroutine exits
 
 	mu          sync.Mutex
 	intervals   map[time.Duration]int    // map from interval time to count of listeners requesting that time
 	listeners   map[OOBListener]struct{} // set of registered listeners
 	minInterval time.Duration
-	stop        func()        // stops the current run goroutine
-	stopped     chan struct{} // closed when the run goroutine exits
+	stop        func() // stops the current run goroutine
 }
 
 // registerListener adds the listener and its requested report interval to the

orca/producer_test.go

@@ -27,6 +27,7 @@ import (
 	"google.golang.org/grpc/balancer"
 	"google.golang.org/grpc/balancer/roundrobin"
 	"google.golang.org/grpc/codes"
+	"google.golang.org/grpc/connectivity"
 	"google.golang.org/grpc/credentials/insecure"
 	"google.golang.org/grpc/internal/grpctest"
 	"google.golang.org/grpc/internal/testutils"
@@ -64,13 +65,19 @@ func (w *ccWrapper) NewSubConn(addrs []resolver.Address, opts balancer.NewSubCon
 	if len(addrs) != 1 {
 		panic(fmt.Sprintf("got addrs=%v; want len(addrs) == 1", addrs))
 	}
+	var sc balancer.SubConn
+	opts.StateListener = func(scs balancer.SubConnState) {
+		if scs.ConnectivityState != connectivity.Ready {
+			return
+		}
+		l := getListenerInfo(addrs[0])
+		l.listener.cleanup = orca.RegisterOOBListener(sc, l.listener, l.opts)
+		l.sc = sc
+	}
 	sc, err := w.ClientConn.NewSubConn(addrs, opts)
 	if err != nil {
 		return sc, err
 	}
-	l := getListenerInfo(addrs[0])
-	l.listener.cleanup = orca.RegisterOOBListener(sc, l.listener, l.opts)
-	l.sc = sc
 	return sc, nil
 }