Here are some devices you can use with eBlock but you can create your own device
Go to eBlock Application Repository
Information
·
Make a custom device
·
Contribute
You can use any kind of device with eBlock, and customize the list of devices you want to appear under "devices menu".
Each device can be configured to have these features:
- Which blocks to show
- The Driver user must install to use it
- One ore more different firmwares (could be to use with online mode, or custom firmwares like factory reset)
- Basic help for users
- Custom code template to render scratch blocks to c/c++
- Define digital and analog pins
Clone or download this repository and extract the context under eBlock/resources/devices/
You can remove those devices you don't want to show under devices menu but no base because is the basic device from with other devices override functions and blocks.
Each device resides under eBlock/resources/devices/ folder, and must have a file called device.json
device.json
{
"label": "Makeblock - mBot Basic [mCore]",
"version" : "1.0" ,
"fqbn": "arduino:avr:uno",
"hex":["mbot_reset_default_program.hex", "mbot_firmware.hex" ],
"driver": {"windows":"driver_ch340_arduino.exe", "mac":"", "linux":""},
"digital_pins":[0,1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13],
"analog_pins": ["A0","A1", "A2", "A3", "A4", "A5"]
}
- label: Is a readable name for this device
- version: You can set a version number
- fqbn: Fully Qualified Board Name to tell arduino-cli how to compile (ex.: esp8266:esp8266:nodemcuv2 )
- hex: Provide users an array of firmwares avaliable to flash
- driver: The exeutable driver installer name. Driver must reside under eBlock/resources/drivers/
- digital_pins: Pins that will use some blocks for digital in/out functions
- digital_pins: Pins that will use some blocks for analog input functions
You can customize much more your device with the following files inside the device folder
Define custom blocks you want to appear once users select your device. Like extension system in mBlock but only blocks for this device.
This is the c/c++ code template where eBlock will render sratch code. But you can place some specific functions and includes that will need your device to compile and upload source code.
#include "eblock.h"
//include
//define
//serialParser
void setup(){
Serial.begin(9600);
//setup
}
void loop(){
//serialParserCall
//loop
_loop();
}
void _loop(){
//_loop
}
//function
void echidna_led(uint8_t pin, uint8_t state ){
if(pin==0){ //ALL pins
e_pin_set(11,state);
e_pin_set(12,state);
e_pin_set(13,state);
}else{
e_pin_set(pin,state);
};
}
void register_callback( uint8_t event, void (*in_main_func)() ){
}
void _delay(float seconds){
long endTime = millis() + seconds * 1000;
while(millis() < endTime)_loop();
}
You can provide a basic about how to use your device or the device pinouts. If your device has a README.md file , eblock will show an icon next to the device selected
Contact me if you want to add your own device to this repository