Feature | Adding TDS 8 support

doc/snippets/Microsoft.Data.SqlClient/SqlConnection.xml

@@ -537,9 +537,10 @@ End Module
 |Current Language<br /><br /> -or-<br /><br /> Language|N/A|Sets the language used for database server warning or error messages.<br /><br /> The language name can be 128 characters or less.|  
 |Data Source<br /><br /> -or-<br /><br /> Server<br /><br /> -or-<br /><br /> Address<br /><br /> -or-<br /><br /> Addr<br /><br /> -or-<br /><br /> Network Address|N/A|The name or network address of the instance of SQL Server to which to connect. The port number can be specified after the server name:<br /><br /> `server=tcp:servername, portnumber`<br /><br /> When specifying a local instance, always use (local). To force a protocol, add one of the following prefixes:<br /><br /> `np:(local),  tcp:(local), lpc:(local)`<br /><br /> You can also connect to a LocalDB database as follows:<br /><br /> `server=(localdb)\\myInstance`<br /><br /> For more information about LocalDB, see [SqlClient Support for LocalDB](/sql/connect/ado-net/sql/sqlclient-support-localdb).<br /><br /> **Data Source** must use the TCP format or the Named Pipes format.<br /><br /> TCP format is as follows:<br /><br /> -   tcp:\<host name>\\<instance name\><br />-   tcp:\<host name>,\<TCP/IP port number><br /><br /> The TCP format must start with the prefix "tcp:" and is followed by the database instance, as specified by a host name and an instance name. This format is not applicable when connecting to Azure SQL Database. TCP is automatically selected for connections to Azure SQL Database when no protocol is specified.<br /><br /> The host name MUST be specified in one of the following ways:<br /><br /> -   NetBIOSName<br />-   IPv4Address<br />-   IPv6Address<br /><br /> The instance name is used to resolve to a particular TCP/IP port number on which a database instance is hosted. Alternatively, specifying a TCP/IP port number directly is also allowed. If both instance name and port number are not present, the default database instance is used.<br /><br /> The Named Pipes format is as follows:<br /><br /> -   np:\\\\<host name\>\pipe\\<pipe name\><br /><br /> The Named Pipes format MUST start with the prefix "np:" and is followed by a named pipe name.<br /><br /> The host name MUST be specified in one of the following ways:<br /><br /> -   NetBIOSName<br />-   IPv4Address<br />-   IPv6Address<br /><br /> The pipe name is used to identify the database instance to which the .NET application will connect.<br /><br /> If the value of the **Network** key is specified, the prefixes "tcp:" and "np:" should not be specified. **Note:**  You can force the use of TCP instead of shared memory, either by prefixing **tcp:** to the server name in the connection string, or by using **localhost**.|  
 |Enclave Attestation Url|N/A|Gets or sets the enclave attestation URL to be used with enclave based Always Encrypted.|
-|Encrypt|'false' in v3.1 and older<br />'true' in v4.0 and newer|When `true`, SQL Server uses SSL encryption for all data sent between the client and server if the server has a certificate installed. Recognized values are `true`, `false`, `yes`, and `no`. For more information, see [Connection String Syntax](/sql/connect/ado-net/connection-string-syntax).<br /><br /> When `TrustServerCertificate` is false and `Encrypt` is true, the server name (or IP address) in a SQL Server SSL certificate must exactly match the server name (or IP address) specified in the connection string. Otherwise, the connection attempt will fail. For information about support for certificates whose subject starts with a wildcard character (*), see [Accepted wildcards used by server certificates for server authentication](https://support.microsoft.com/kb/258858).|  
+|Encrypt|'true' in 4.0 and above<br/><br/>'false' in 3.x and below|Recognized values are:<br/>versions 1 - 4: `true`/`yes` and `false`/`no`<br/>versions 5+: `true`/`yes`/`mandatory`, `false`/`no`/`optional` and `strict`. When `true`, TLS encryption is used for all data sent between the client and server if the server has a certificate installed. When `strict`, TDS 8.0 TLS encryption is used and the `TrustServerCertificate` setting is ignored and treated as false. For more information, see [Connection String Syntax](/sql/connect/ado-net/connection-string-syntax).<br /><br /> When `Encrypt` is true or strict and `TrustServerCertificate` is false, the server name (or IP address) in a server's certificate must exactly match the server name (or IP address) specified in the connection string. Otherwise, the connection attempt will fail. For information about support for certificates whose subject starts with a wildcard character (*), see [Accepted wildcards used by server certificates for server authentication](https://support.microsoft.com/kb/258858).|  
 |Enlist|'true'|`true` indicates that the SQL Server connection pooler automatically enlists the connection in the creation thread's current transaction context.|  
 |Failover Partner|N/A|The name of the failover partner server where database mirroring is configured.<br /><br /> If the value of this key is "", then **Initial Catalog** must be present, and its value must not be "".<br /><br /> The server name can be 128 characters or less.<br /><br /> If you specify a failover partner but the failover partner server is not configured for database mirroring and the primary server (specified with the Server keyword) is not available, then the connection will fail.<br /><br /> If you specify a failover partner and the primary server is not configured for database mirroring, the connection to the primary server (specified with the Server keyword) will succeed if the primary server is available.|  
+|Host Name In Certificate<br /><br /> -or-<br /><br />HostNameInCertificate|N/A|Available starting in version 5.0.<br/><br/>The host name to use when validating the server certificate. When not specified, the server name from the Data Source is used for certificate validation.|
 |Initial Catalog<br /><br /> -or-<br /><br /> Database|N/A|The name of the database.<br /><br /> The database name can be 128 characters or less.|  
 |Integrated Security<br /><br /> -or-<br /><br /> Trusted_Connection|'false'|When `false`, User ID and Password are specified in the connection. When `true`, the current Windows account credentials are used for authentication.<br /><br /> Recognized values are `true`, `false`, `yes`, `no`, and `sspi` (strongly recommended), which is equivalent to `true`.<br /><br /> If User ID and Password are specified and Integrated Security is set to true, the User ID and Password will be ignored and Integrated Security will be used.<br /><br /> <xref:Microsoft.Data.SqlClient.SqlCredential> is a more secure way to specify credentials for a connection that uses SQL Server Authentication (`Integrated Security=false`).|  
 |IP Address Preference<br /><br /> -or-<br /><br /> IPAddressPreference|IPv4First|The IP address family preference when establishing TCP connections. If `Transparent Network IP Resolution` (in .NET Framework) or `Multi Subnet Failover` is set to true, this setting has no effect. Supported values include:<br /><br /> `IPAddressPreference=IPv4First`<br /><br />`IPAddressPreference=IPv6First`<br /><br />`IPAddressPreference=UsePlatformDefault`|  
@@ -557,7 +558,7 @@ End Module
 |Replication|'false'|`true` if replication is supported using the connection.|  
 |Transaction Binding|Implicit Unbind|Controls connection association with an enlisted `System.Transactions` transaction.<br /><br /> Possible values are:<br /><br /> `Transaction Binding=Implicit Unbind;`<br /><br /> `Transaction Binding=Explicit Unbind;`<br /><br /> Implicit Unbind causes the connection to detach from the transaction when it ends. After detaching, additional requests on the connection are performed in autocommit mode. The `System.Transactions.Transaction.Current` property is not checked when executing requests while the transaction is active. After the transaction has ended, additional requests are performed in autocommit mode.<br /><br /> If the system ends the transaction (in the scope of a using block) before the last command completes, it will throw <xref:System.InvalidOperationException>.<br /><br /> Explicit Unbind causes the connection to remain attached to the transaction until the connection is closed or an explicit `SqlConnection.TransactionEnlist(null)` is called. Beginning in .NET Framework 4.0, changes to Implicit Unbind make Explicit Unbind obsolete. An `InvalidOperationException` is thrown if `Transaction.Current` is not the enlisted transaction or if the enlisted transaction is not active.|  
 |Transparent Network IP Resolution<br /><br /> -or-<br /><br />TransparentNetworkIPResolution|See description.|When the value of this key is set to `true`, the application is required to retrieve all IP addresses for a particular DNS entry and attempt to connect with the first one in the list. If the connection is not established within 0.5 seconds, the application will try to connect to all others in parallel. When the first answers, the application will establish the connection with the respondent IP address.<br /><br /> If the `MultiSubnetFailover` key is set to `true`, `TransparentNetworkIPResolution` is ignored.<br /><br /> If the `Failover Partner` key is set, `TransparentNetworkIPResolution` is ignored.<br /><br /> The value of this key must be `true`, `false`, `yes`, or `no`.<br /><br /> A value of `yes` is treated the same as a value of `true`.<br /><br /> A value of `no` is treated the same as a value of `false`.<br /><br /> The default values are as follows:<br /><br /> <ul><li>`false` when:<br /><br /> <ul><li>Connecting to Azure SQL Database where the data source ends with:<br /><br /> <ul><li>.database.chinacloudapi.cn</li><li>.database.usgovcloudapi.net</li><li>.database.cloudapi.de</li><li>.database.windows.net</li></ul></li><li>`Authentication` is 'Active Directory Password' or 'Active Directory Integrated'</li></ul></li><li>`true` in all other cases.</li></ul>|  
-|Trust Server Certificate<br /><br /> -or-<br /><br />TrustServerCertificate|'false'|When set to `true`, SSL is used to encrypt the channel when bypassing walking the certificate chain to validate trust. If TrustServerCertificate is set to `true` and Encrypt is set to `false`, the channel is not encrypted. Recognized values are `true`, `false`, `yes`, and `no`. For more information, see [Connection String Syntax](/sql/connect/ado-net/connection-string-syntax).|  
+|Trust Server Certificate<br /><br /> -or-<br /><br />TrustServerCertificate|'false'|When set to `true`, TLS is used to encrypt the channel when bypassing walking the certificate chain to validate trust. If TrustServerCertificate is set to `true` and Encrypt is set to `false`, the channel is not encrypted. Recognized values are `true`, `false`, `yes`, and `no`. For more information, see [Connection String Syntax](/sql/connect/ado-net/connection-string-syntax).|  
 |Type System Version|N/A|A string value that indicates the type system the application expects. The functionality available to a client application is dependent on the version of SQL Server and the compatibility level of the database. Explicitly setting the type system version that the client application was written for avoids potential problems that could cause an application to break if a different version of SQL Server is used. **Note:**  The type system version cannot be set for common language runtime (CLR) code executing in-process in SQL Server. For more information, see [SQL Server Common Language Runtime Integration](/dotnet/framework/data/adonet/sql/sql-server-common-language-runtime-integration). <br /><br /> Possible values are:<br /><br /> `Type System Version=SQL Server 2012;`<br /><br /> `Type System Version=SQL Server 2008;`<br /><br /> `Type System Version=SQL Server 2005;`<br /><br /> `Type System Version=Latest;`<br /><br /> `Type System Version=SQL Server 2012;` specifies that the application will require version 11.0.0.0 of Microsoft.SqlServer.Types.dll. The other `Type System Version` settings will require version 10.0.0.0 of Microsoft.SqlServer.Types.dll.<br /><br /> `Latest` is obsolete and should not be used. `Latest` is equivalent to `Type System Version=SQL Server 2008;`.|  
 |User ID<br /><br /> -or-<br /><br /> UID<br /><br /> -or-<br /><br /> User|N/A|The SQL Server login account. Not recommended. To maintain a high level of security, we strongly recommend that you use the `Integrated Security` or `Trusted_Connection` keywords instead. <xref:Microsoft.Data.SqlClient.SqlCredential> is a more secure way to specify credentials for a connection that uses SQL Server Authentication.<br /><br /> The user ID must be 128 characters or less.|  
 |User Instance|'false'|A value that indicates whether to redirect the connection from the default SQL Server Express instance to a runtime-initiated instance running under the account of the caller.|  

doc/snippets/Microsoft.Data.SqlClient/SqlConnectionEncryptOption.xml

@@ -0,0 +1,46 @@
+<?xml version="1.0"?>
+<docs>
+  <members name="SqlConnectionEncryptOption">
+    <SqlConnectionEncryptOption>
+      <summary>
+        These options are used to control encryption behavior of the communication between the server and the client.
+      </summary>
+      <remarks>Implicit conversions have been added to maintain backwards compatibility with boolean behahavior for the <see cref="P:Microsoft.Data.SqlClient.SqlConnectionStringBuilder.Encrypt" /> property. When converting from a boolean, a value of <see langword="true" /> converts to <see cref="P:Microsoft.Data.SqlClient.SqlConnectionEncryptOption.Mandatory" /> and a value of <see langword="false" /> converts to <see cref="P:Microsoft.Data.SqlClient.SqlConnectionEncryptOption.Optional" />. When converting to a boolean, <see cref="P:Microsoft.Data.SqlClient.SqlConnectionEncryptOption.Mandatory" /> and <see cref="P:Microsoft.Data.SqlClient.SqlConnectionEncryptOption.Strict" /> convert to <see langword="true" /> and <see cref="P:Microsoft.Data.SqlClient.SqlConnectionEncryptOption.Optional" /> converts <see langword="false" />.
+      </remarks>
+    </SqlConnectionEncryptOption>
+    <Optional>
+      <summary>Specifies that TLS encryption is optional when connecting to the server. If the server requires encryption, encryption will be negotiated.</summary>
+    </Optional>
+    <Mandatory>
+      <summary>Specifies that TLS encryption is required when connecting to the server. If the server doesn't support encryption, the connection will fail.</summary>
+    </Mandatory>
+    <Strict>
+      <summary>Enables and requires TDS 8.0, TLS encryption to the server. If the server doesn't support TDS 8.0, TLS encryption, the connection will fail.</summary>
+    </Strict>
+    <BoolToOption>
+      <param name="value">The boolean value to be used for implicit comparison.</param>
+      <summary>
+        Enables implicit converstion of a boolean to a <see cref="T:Microsoft.Data.SqlClient.SqlConnectionEncryptOption" />. A value of <see langword="true" /> converts to <see cref="P:Microsoft.Data.SqlClient.SqlConnectionEncryptOption.Mandatory" />. A value of <see langword="false" /> converts to <see cref="P:Microsoft.Data.SqlClient.SqlConnectionEncryptOption.Optional" />.
+      </summary>
+    </BoolToOption>
+    <OptionToBool>
+      <param name="value">The <see cref="T:Microsoft.Data.SqlClient.SqlConnectionEncryptOption" /> value to be used for implicit comparison.</param>
+      <summary>
+        Enables implicit converstion of a <see cref="T:Microsoft.Data.SqlClient.SqlConnectionEncryptOption" /> to a boolean. <see cref="P:Microsoft.Data.SqlClient.SqlConnectionEncryptOption.Mandatory" /> and <see cref="P:Microsoft.Data.SqlClient.SqlConnectionEncryptOption.Strict" /> convert to <see langword="true" />. <see cref="P:Microsoft.Data.SqlClient.SqlConnectionEncryptOption.Optional" /> converts to <see langword="false" />.
+      </summary>
+    </OptionToBool>
+    <ToString>
+      <summary>Returns the string value of <see cref="T:Microsoft.Data.SqlClient.SqlConnectionEncryptOption" />.</summary>
+    </ToString>
+    <Equals>
+      <summary>
+        Compares the <see cref="M:Microsoft.Data.SqlClient.SqlConnectionEncryptOption.ToString" /> representation of <see cref="T:Microsoft.Data.SqlClient.SqlConnectionEncryptOption" /> to another <see cref="T:Microsoft.Data.SqlClient.SqlConnectionEncryptOption" />.
+      </summary>
+    </Equals>
+    <GetHashCode>
+      <summary>
+        Returns the hash code of the <see cref="M:Microsoft.Data.SqlClient.SqlConnectionEncryptOption.ToString" /> value.
+      </summary>
+    </GetHashCode>
+  </members>
+</docs>

doc/snippets/Microsoft.Data.SqlClient/SqlConnectionStringBuilder.xml

@@ -410,15 +410,15 @@ If the value of the **Network** key is specified, the prefixes "tcp:" and "np:"
             <value>The enclave attestation URL.</value>
         </EnclaveAttestationUrl>
         <Encrypt>
-            <summary>Gets or sets a Boolean value that indicates whether SQL Server uses SSL encryption for all data sent between the client and server if the server has a certificate installed.</summary>
-            <value>The value of the <see cref="P:Microsoft.Data.SqlClient.SqlConnectionStringBuilder.Encrypt" /> property, or <see langword="true" /> if none has been supplied.</value>
+            <summary>Gets or sets a <see cref="P:Microsoft.Data.SqlClient.SqlConnectionEncryptionOption" /> value that indicates whether TLS encryption is required for all data sent between the client and server.</summary>
+            <value>The value of the <see cref="P:Microsoft.Data.SqlClient.SqlConnectionEncryptionOption" /> property.</value>
             <remarks>
             <format type="text/markdown"><![CDATA[  
 
 ## Remarks  
  This property corresponds to the "Encrypt" key within the connection string.  
 
-When `TrustServerCertificate` is false and `Encrypt` is true, the server name (or IP address) in a SQL Server SSL certificate must exactly match the server name (or IP address) specified in the connection string. Otherwise, the connection attempt will fail. For information about support for certificates whose subject starts with a wildcard character (*), see [Enable encrypted connections to the Database Engine](/sql/database-engine/configure-windows/enable-encrypted-connections-to-the-database-engine#certificate-requirements).  
+When `TrustServerCertificate` is false and `Encrypt` is true, the server name (or IP address) in a server's TLS certificate must exactly match the server name (or IP address) specified in the connection string. Otherwise, the connection attempt will fail. For information about support for certificates whose subject starts with a wildcard character (*), see [Enable encrypted connections to the Database Engine](/sql/database-engine/configure-windows/enable-encrypted-connections-to-the-database-engine#certificate-requirements).  
 
 > [!NOTE]
 > Starting from **version 4.0**, the default value of the property `Encrypt` is set to `true`.
@@ -898,7 +898,7 @@ Database = AdventureWorks
 ## Remarks  
  This property corresponds to the "Trust Server Certificate" and "TrustServerCertificate" keys within the connection string.  
 
- When `Trust Server Certificate` is set to `true`, the transport layer will use SSL to encrypt the channel and bypass walking the certificate chain to validate trust. If `Trust Server Certificate` is set to `true` and encryption is enforced by target server, the encryption level specified on the server will be used even if `Encrypt` is set to `false`. The connection will fail otherwise.
+ When `Trust Server Certificate` is set to `true`, the transport layer will use TLS to encrypt the channel and bypass walking the certificate chain to validate trust. If `Trust Server Certificate` is set to `true` and encryption is enforced by target server, the encryption level specified on the server will be used even if `Encrypt` is set to `false`. The connection will fail otherwise.
 
  For more information, see [Encryption Hierarchy](/sql/relational-databases/security/encryption/encryption-hierarchy) and [Using Encryption Without Validation](/sql/relational-databases/native-client/features/using-encryption-without-validation).