kafka 2.4.0

.travis.yml

@@ -14,7 +14,7 @@ env:
  - KAFKA_VERSION=0.10.2.2
  - KAFKA_VERSION=0.11.0.3
  - KAFKA_VERSION=1.1.1
- - KAFKA_VERSION=2.3.0
+ - KAFKA_VERSION=2.4.0
 
 addons:
  apt:

README.rst

@@ -1,7 +1,7 @@
 Kafka Python client
 ------------------------
 
-.. image:: https://img.shields.io/badge/kafka-2.3%2C%202.2%2C%202.1%2C%202.0%2C%201.1%2C%201.0%2C%200.11%2C%200.10%2C%200.9%2C%200.8-brightgreen.svg
+.. image:: https://img.shields.io/badge/kafka-2.4%2C%202.3%2C%202.2%2C%202.1%2C%202.0%2C%201.1%2C%201.0%2C%200.11%2C%200.10%2C%200.9%2C%200.8-brightgreen.svg
  :target: https://kafka-python.readthedocs.io/compatibility.html
 .. image:: https://img.shields.io/pypi/pyversions/kafka-python.svg
  :target: https://pypi.python.org/pypi/kafka-python
@@ -150,4 +150,4 @@ for interacting with kafka brokers via the python repl. This is useful for
 testing, probing, and general experimentation. The protocol support is
 leveraged to enable a KafkaClient.check_version() method that
 probes a kafka broker and attempts to identify which version it is running
-(0.8.0 to 2.3+).
+(0.8.0 to 2.4+).

docs/compatibility.rst

@@ -1,12 +1,12 @@
 Compatibility
 -------------
 
-.. image:: https://img.shields.io/badge/kafka-2.3%2C%202.2%2C%202.1%2C%202.0%2C%201.1%2C%201.0%2C%200.11%2C%200.10%2C%200.9%2C%200.8-brightgreen.svg
+.. image:: https://img.shields.io/badge/kafka-2.4%2C%202.3%2C%202.2%2C%202.1%2C%202.0%2C%201.1%2C%201.0%2C%200.11%2C%200.10%2C%200.9%2C%200.8-brightgreen.svg
  :target: https://kafka-python.readthedocs.io/compatibility.html
 .. image:: https://img.shields.io/pypi/pyversions/kafka-python.svg
  :target: https://pypi.python.org/pypi/kafka-python
 
-kafka-python is compatible with (and tested against) broker versions 2.3
+kafka-python is compatible with (and tested against) broker versions 2.4
 through 0.8.0 . kafka-python is not compatible with the 0.8.2-beta release.
 
 Because the kafka server protocol is backwards compatible, kafka-python is

docs/index.rst

@@ -1,7 +1,7 @@
 kafka-python
 ############
 
-.. image:: https://img.shields.io/badge/kafka-2.3%2C%202.2%2C%202.1%2C%202.0%2C%201.1%2C%201.0%2C%200.11%2C%200.10%2C%200.9%2C%200.8-brightgreen.svg
+.. image:: https://img.shields.io/badge/kafka-2.4%2C%202.3%2C%202.2%2C%202.1%2C%202.0%2C%201.1%2C%201.0%2C%200.11%2C%200.10%2C%200.9%2C%200.8-brightgreen.svg
  :target: https://kafka-python.readthedocs.io/compatibility.html
 .. image:: https://img.shields.io/pypi/pyversions/kafka-python.svg
  :target: https://pypi.python.org/pypi/kafka-python
@@ -136,7 +136,7 @@ for interacting with kafka brokers via the python repl. This is useful for
 testing, probing, and general experimentation. The protocol support is
 leveraged to enable a :meth:`~kafka.KafkaClient.check_version()`
 method that probes a kafka broker and
-attempts to identify which version it is running (0.8.0 to 2.3+).
+attempts to identify which version it is running (0.8.0 to 2.4+).
 
 
 .. toctree::

servers/2.4.0/resources/kafka.properties

@@ -0,0 +1,145 @@
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+# 
+# http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# see kafka.server.KafkaConfig for additional details and defaults
+
+############################# Server Basics #############################
+
+# The id of the broker. This must be set to a unique integer for each broker.
+broker.id={broker_id}
+
+############################# Socket Server Settings #############################
+
+listeners={transport}://{host}:{port}
+security.inter.broker.protocol={transport}
+
+ssl.keystore.location={ssl_dir}/kafka.server.keystore.jks
+ssl.keystore.password=foobar
+ssl.key.password=foobar
+ssl.truststore.location={ssl_dir}/kafka.server.truststore.jks
+ssl.truststore.password=foobar
+
+authorizer.class.name=kafka.security.auth.SimpleAclAuthorizer
+allow.everyone.if.no.acl.found=true
+
+# The port the socket server listens on
+#port=9092
+
+# Hostname the broker will bind to. If not set, the server will bind to all interfaces
+#host.name=localhost
+
+# Hostname the broker will advertise to producers and consumers. If not set, it uses the
+# value for "host.name" if configured. Otherwise, it will use the value returned from
+# java.net.InetAddress.getCanonicalHostName().
+#advertised.host.name=<hostname routable by clients>
+
+# The port to publish to ZooKeeper for clients to use. If this is not set,
+# it will publish the same port that the broker binds to.
+#advertised.port=<port accessible by clients>
+
+# The number of threads handling network requests
+num.network.threads=3
+
+# The number of threads doing disk I/O
+num.io.threads=8
+
+# The send buffer (SO_SNDBUF) used by the socket server
+socket.send.buffer.bytes=102400
+
+# The receive buffer (SO_RCVBUF) used by the socket server
+socket.receive.buffer.bytes=102400
+
+# The maximum size of a request that the socket server will accept (protection against OOM)
+socket.request.max.bytes=104857600
+
+
+############################# Log Basics #############################
+
+# A comma seperated list of directories under which to store log files
+log.dirs={tmp_dir}/data
+
+# The default number of log partitions per topic. More partitions allow greater
+# parallelism for consumption, but this will also result in more files across
+# the brokers.
+num.partitions={partitions}
+default.replication.factor={replicas}
+
+## Short Replica Lag -- Drops failed brokers out of ISR
+replica.lag.time.max.ms=1000
+replica.socket.timeout.ms=1000
+
+############################# Log Flush Policy #############################
+
+# Messages are immediately written to the filesystem but by default we only fsync() to sync
+# the OS cache lazily. The following configurations control the flush of data to disk. 
+# There are a few important trade-offs here:
+# 1. Durability: Unflushed data may be lost if you are not using replication.
+# 2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush.
+# 3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to exceessive seeks. 
+# The settings below allow one to configure the flush policy to flush data after a period of time or
+# every N messages (or both). This can be done globally and overridden on a per-topic basis.
+
+# The number of messages to accept before forcing a flush of data to disk
+#log.flush.interval.messages=10000
+
+# The maximum amount of time a message can sit in a log before we force a flush
+#log.flush.interval.ms=1000
+
+############################# Log Retention Policy #############################
+
+# The following configurations control the disposal of log segments. The policy can
+# be set to delete segments after a period of time, or after a given size has accumulated.
+# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
+# from the end of the log.
+
+# The minimum age of a log file to be eligible for deletion
+log.retention.hours=168
+
+# A size-based retention policy for logs. Segments are pruned from the log as long as the remaining
+# segments don't drop below log.retention.bytes.
+#log.retention.bytes=1073741824
+
+# The maximum size of a log segment file. When this size is reached a new log segment will be created.
+log.segment.bytes=1073741824
+
+# The interval at which log segments are checked to see if they can be deleted according 
+# to the retention policies
+log.retention.check.interval.ms=300000
+
+# By default the log cleaner is disabled and the log retention policy will default to just delete segments after their retention expires.
+# If log.cleaner.enable=true is set the cleaner will be enabled and individual logs can then be marked for log compaction.
+log.cleaner.enable=false
+
+# tune down offset topics to reduce setup time in tests
+offsets.commit.timeout.ms=500
+offsets.topic.num.partitions=2
+offsets.topic.replication.factor=1
+
+# Allow shorter session timeouts for tests
+group.min.session.timeout.ms=1000
+
+
+############################# Zookeeper #############################
+
+# Zookeeper connection string (see zookeeper docs for details).
+# This is a comma separated host:port pairs, each corresponding to a zk
+# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
+# You can also append an optional chroot string to the urls to specify the
+# root directory for all kafka znodes.
+zookeeper.connect={zk_host}:{zk_port}/{zk_chroot}
+
+# Timeout in ms for connecting to zookeeper
+zookeeper.connection.timeout.ms=30000
+# We want to expire kafka broker sessions quickly when brokers die b/c we restart them quickly
+zookeeper.session.timeout.ms=500

servers/2.4.0/resources/log4j.properties

@@ -0,0 +1,25 @@
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+# 
+# http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+log4j.rootLogger=INFO, stdout, logfile
+
+log4j.appender.stdout=org.apache.log4j.ConsoleAppender
+log4j.appender.stdout.layout=org.apache.log4j.PatternLayout
+log4j.appender.stdout.layout.ConversionPattern=[%d] %p %m (%c)%n
+
+log4j.appender.logfile=org.apache.log4j.FileAppender
+log4j.appender.logfile.File=${kafka.logs.dir}/server.log
+log4j.appender.logfile.layout=org.apache.log4j.PatternLayout
+log4j.appender.logfile.layout.ConversionPattern=[%d] %p %m (%c)%n

servers/2.4.0/resources/zookeeper.properties

@@ -0,0 +1,21 @@
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+# 
+# http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# the directory where the snapshot is stored.
+dataDir={tmp_dir}
+# the port at which the clients will connect
+clientPort={port}
+clientPortAddress={host}
+# disable the per-ip limit on the number of connections since this is a non-production config
+maxClientCnxns=0