[MegaLinter] Apply linters automatic fixes (#14)

Co-authored-by: ScottGibb <44235263+ScottGibb@users.noreply.github.com>

README.md

@@ -7,6 +7,7 @@
 This is a platform agnostic Rust Driver for the TMAG52732 3 Axis I2C Hall effect Sensor by Texas Instruments. The driver is based on the [embedded-hal](https://github.com/rust-embedded/embedded-hal) traits. For more information it is recommended to look at the docs using `cargo doc`
 
 ## The Device
+
 An extract taken from the [Texas Instruments Datasheet](./docs/tmag5273.pdf):
 >The TMAG5273 is a low-power linear 3D Hall-effect sensor designed for a wide range of industrial and personal electronics applications. This device integrates three independent Hall-effect sensors in the X, Y, and Z axes. A precision analog signal-chain along with an integrated 12-bit ADC digitizes the measured analog magnetic field values. The I2C interface, while supporting multiple operating VCC ranges, ensures seamless data communication with low-voltage microcontrollers. The device has an integrated temperature sensor available for multiple system functions, such as thermal budget check or temperature compensation calculation for a given magnetic field.The TMAG5273 can be configured through the I2C interface to enable any combination of magnetic axes and temperature measurements. Additionally, the device can be configured to various power options (including wake-up and sleep mode) allowing designers to optimize system power consumption based on their system-level needs. Multiple sensor conversion schemes and I2C read frames help optimize throughput and accuracy. A dedicated INT pin can act as a system interrupt during low power wake-up and sleep mode, and can also be used by a microcontroller to trigger a new sensor conversion.An integrated angle calculation engine (CORDIC) provides full 360° angular position information for both on-axis and off-axis angle measurement topologies. The angle calculation is performed using two user-selected magnetic axes. The device features magnetic gain and offset correction to mitigate the
 impact of system mechanical error sources.The TMAG5273 is offered in four different factory-programmed I2C addresses. The device also supports additional I2C addresses through the modification

examples/README.md

@@ -1,6 +1,7 @@
 # Examples
 
 ## Summary
+
 Within this directory are a set of examples for different platforms the goal being to show the developer how to use the driver on each platform. The driver should be platform agnostic and the API should be the same regardless of whether you are on MCU or Linux/Mac. However what will change is the setup of the I2C bus.
 
 When working on a desktop environment the sensor will be attached via [FT232H Breakout Board](https://www.adafruit.com/product/2264)

utils/README.md

@@ -1,6 +1,7 @@
 # Utils
 
 ## Summary
+
 This internal crate is a utilities package designed for connecting the Embedded Targets to the Library as such it is not to be used as part of the library.
 
 The main thing this crate offers is a generic way of setting up the I2C Bus on different Linux/MacOS targets. This is done through the `setup_i2c()` method outlined in [lib.rs](./src/lib.rs).