SAP Business Technology Platform (SAP BTP) Service Operator for Kubernetes

With the SAP BTP service operator, you can consume SAP BTP services from your Kubernetes cluster using Kubernetes-native tools. SAP BTP service operator allows you to provision and manage service instances and service bindings of SAP BTP services so that your Kubernetes-native applications can access and use needed services from the cluster.
The SAP BTP service operator is based on the Kubernetes Operator pattern.

Architecture

SAP BTP service operator communicates with Service Manager that uses the Open service broker API to communicate with service brokers, acting as an intermediary for the Kubernetes API Server to negotiate the initial provisioning and retrieve the credentials necessary for the application to use a managed service.

It is implemented using a CRDs-based architecture.

Prerequisites

SAP BTP Global Account and Subaccount
Service Management Control (SMCTL) command line interface. See Using the SMCTL.
Kubernetes cluster running version 1.17 or higher
kubectl v1.17 or higher
helm v3.0 or higher

Back to top

Setup

Install cert-manager
- for releases v0.1.18 or higher use cert manager v1.6.0 or higher
- for releases v0.1.17 or lower use cert manager lower then v1.6.0
Obtain the access credentials for the SAP BTP service operator:

a. Using the SAP BTP cockpit or CLI, create an instance of the SAP Service Manager service (technical name: service-manager) with the plan: service-operator-access

Note

If you can't see the needed plan, you need to entitle your subaccount to use SAP Service Manager service.

For more information about how to entitle a service to a subaccount, see:
- Configure Entitlements and Quotas for Subaccounts
For more information about creating service instances, see:
- Creating Service Instances Using the SAP BTP Cockpit
- Creating Service Instances using SMCTL
b. Create a binding to the created service instance.

For more information about creating service bindings, see:
- Creating Service Bindings Using the SAP BTP Cockpit
- Creating Service Bindings Using SMCTL.
c. Retrieve the generated access credentials from the created binding:

The example of the default binding object used if no credentials type is specified:
```
 {
     "clientid": "xxxxxxx",
     "clientsecret": "xxxxxxx",
     "url": "https://mysubaccount.authentication.eu10.hana.ondemand.com",
     "xsappname": "b15166|service-manager!b1234",
     "sm_url": "https://service-manager.cfapps.eu10.hana.ondemand.com"
 }
```
The example of the binding object with the specified X.509 credentials type:
```
{
     "clientid": "xxxxxxx",
     "certificate": "-----BEGIN CERTIFICATE-----...-----END CERTIFICATE-----\n-----BEGIN CERTIFICATE-----..-----END CERTIFICATE-----\n-----BEGIN CERTIFICATE-----...-----END CERTIFICATE-----\n",
     "key": "-----BEGIN RSA PRIVATE KEY-----...-----END RSA PRIVATE KEY-----\n",
     "certurl": "https://mysubaccount.authentication.cert.eu10.hana.ondemand.com",
     "xsappname": "b15166|service-manager!b1234",
     "sm_url": "https://service-manager.cfapps.eu10.hana.ondemand.com"
 }
```

Add SAP BTP service operator chart repository

 helm repo add sap-btp-operator https://sap.github.io/sap-btp-service-operator

Deploy the the SAP BTP service operator in the cluster using the obtained access credentials:

Note:
If you are deploying the SAP BTP service operator in the registered cluster based on the Service Catalog (svcat) and Service Manager agent so that you can migrate svcat-based content to service operator-based content, add --set cluster.id=<clusterID> to your deployment script.
For more information, see the step 2 of the Setup section of Migration to SAP BTP service operator.

The example of the deployment that uses the default access credentials type:

helm upgrade --install <release-name> sap-btp-operator/sap-btp-operator \
    --create-namespace \
    --namespace=sap-btp-operator \
    --set manager.secret.clientid=<clientid> \
    --set manager.secret.clientsecret=<clientsecret> \
    --set manager.secret.sm_url=<sm_url> \
    --set manager.secret.tokenurl=<url>

The example of the deployment that uses the X.509 access credentials type:

helm upgrade --install <release-name> sap-btp-operator/sap-btp-operator \
    --create-namespace \
    --namespace=sap-btp-operator \
    --set manager.secret.clientid=<clientid> \
    --set manager.secret.tls.crt="$(cat /path/to/cert)" \
    --set manager.secret.tls.key="$(cat /path/to/key)" \
    --set manager.secret.sm_url=<sm_url> \
    --set manager.secret.tokenurl=<certurl>

Note:
In order to rotate the credentials between the BTP service operator and Service Manager, you have to create a new binding for the service-operator-access service instance, and then to execute the setup script again, with the new set of credentials. Afterwards you can delete the old binding.

Back to top.

Versions

Review the supported Kubernetes API versions for the following SAP BTP Service Operator versions.

Operator version	Kubernetes API version
`v0.2` or later	`v1`
`v0.1`	`v1alpha1`

Using the SAP BTP Service Operator

Step 1: Create a service instance

To create an instance of a service offered by SAP BTP, first create a ServiceInstance custom-resource file:

    apiVersion: services.cloud.sap.com/v1
    kind: ServiceInstance
    metadata:
        name: my-service-instance
    spec:
        serviceOfferingName: sample-service
        servicePlanName: sample-plan
        externalName: my-service-instance-external
        parameters:
          key1: val1
          key2: val2

<offering> - The name of the SAP BTP service that you want to create. To learn more about viewing and managing the available services for your subaccount in the SAP BTP cockpit, see Service Marketplace.

Tip: Use the Environment filter to get all offerings that are relevant for Kubernetes.
<plan> - The plan of the selected service offering that you want to create.

Apply the custom-resource file in your cluster to create the instance.
```
kubectl apply -f path/to/my-service-instance.yaml
```

Check that the status of the service in your cluster is Created.

kubectl get serviceinstances
NAME                  OFFERING          PLAN        STATUS    AGE
my-service-instance   <offering>        <plan>      Created   44s

Back to top

Step 2: Create a Service Binding

To get access credentials to your service instance and make it available in the cluster so that your applications can use it, create a ServiceBinding custom resource, and set the serviceInstanceName field to the name of the ServiceInstance resource you created.

The credentials are stored in a secret created in your cluster.

  apiVersion: services.cloud.sap.com/v1
  kind: ServiceBinding
  metadata:
      name: my-binding
  spec:
      serviceInstanceName: my-service-instance
      externalName: my-binding-external
      secretName: mySecret
      parameters:
        key1: val1
        key2: val2

Apply the custom resource file in your cluster to create the binding.
```
kubectl apply -f path/to/my-binding.yaml
```

Check that your binding status is Created.

kubectl get servicebindings
NAME         INSTANCE              STATUS    AGE
my-binding   my-service-instance   Created   16s

Check that a secret with the same name as the name of your binding is created. The secret contains the service credentials that apps in your cluster can use to access the service.
```
kubectl get secrets
NAME         TYPE     DATA   AGE
my-binding   Opaque   5      32s
```
See Using Secrets to learn about different options on how to use the credentials from your application running in the Kubernetes cluster,

Back to top

Reference Documentation

Service Instance

Spec

Parameter	Type	Description
serviceOfferingName`*`	`string`	The name of the SAP BTP service offering.
servicePlanName`*`	`string`	The plan to use for the service instance.
servicePlanID	`string`	The plan ID in case service offering and plan name are ambiguous.
externalName	`string`	The name for the service instance in SAP BTP, defaults to the instance `metadata.name` if not specified.
parameters	`[]object`	Some services support the provisioning of additional configuration parameters during the instance creation. For the list of supported parameters, check the documentation of the particular service offering.
parametersFrom	`[]object`	List of sources to populate parameters.
customTags	`[]string`	List of custom tags describing the ServiceInstance, will be copied to `ServiceBinding` secret in the key called `tags`.
userInfo	`object`	Contains information about the user that last modified this service instance.
shared	`*bool`	The shared state. Possible values: true, false, or nil (value was not specified, counts as "false").

Status

Parameter	Type	Description
instanceID	`string`	The service instance ID in SAP Service Manager service.
operationURL	`string`	The URL of the current operation performed on the service instance.
operationType	`string`	The type of the current operation. Possible values are CREATE, UPDATE, or DELETE.
conditions	`[]condition`	An array of conditions describing the status of the service instance. The possible condition types are: - `Ready`: set to `true` if the instance is ready and usable - `Failed`: set to `true` when an operation on the service instance fails. In the case of failure, the details about the error are available in the condition message. - `Succeeded`: set to `true` when an operation on the service instance succeeded. In case of `false` operation considered as in progress unless `Failed` condition exists. - `Shared`: set to `true` when sharing of the service instance succeeded. set to `false` when unsharing of the service instance succeeded or when service instance is not shared.
tags	`[]string`	Tags describing the ServiceInstance as provided in service catalog, will be copied to `ServiceBinding` secret in the key called `tags`.

Service Binding

Spec

Parameter	Type	Description
serviceInstanceName`*`	`string`	The Kubernetes name of the service instance to bind, should be in the namespace of the binding.
externalName	`string`	The name for the service binding in SAP BTP, defaults to the binding `metadata.name` if not specified.
secretName	`string`	The name of the secret where the credentials are stored, defaults to the binding `metadata.name` if not specified.
secretKey	`string`	The key inside the binding secret to store the credentials returned by the broker encoded as json to support complex data structures.
secretRootKey	`string`	The key inside the secret to store all binding data including credentials returned by the broker and additional info under single key. Convenient way to store whole binding data in single file when using `volumeMounts`.
parameters	`[]object`	Some services support the provisioning of additional configuration parameters during the bind request. For the list of supported parameters, check the documentation of the particular service offering.
parametersFrom	`[]object`	List of sources to populate parameters.
userInfo	`object`	Contains information about the user that last modified this service binding.
credentialsRotationPolicy	`object`	Holds automatic credentials rotation configuration.
credentialsRotationPolicy.enabled	`boolean`	Indicates whether automatic credentials rotation are enabled.
credentialsRotationPolicy.rotationFrequency	`duration`	Specifies the frequency at which the binding rotation is performed.
credentialsRotationPolicy.rotatedBindingTTL	`duration`	Specifies the time period for which to keep the rotated binding.

Status

Parameter	Type	Description
instanceID	`string`	The ID of the bound instance in the SAP Service Manager service.
bindingID	`string`	The service binding ID in SAP Service Manager service.
operationURL	`string`	The URL of the current operation performed on the service binding.
operationType	`string`	The type of the current operation. Possible values are CREATE, UPDATE, or DELETE.
conditions	`[]condition`	An array of conditions describing the status of the service instance. The possible conditions types are: - `Ready`: set to `true` if the binding is ready and usable - `Failed`: set to `true` when an operation on the service binding fails. In the case of failure, the details about the error are available in the condition message. - `Succeeded`: set to `true` when an operation on the service binding succeeded. In case of `false` operation considered as in progress unless `Failed` condition exists.
lastCredentialsRotationTime	`time`	Indicates the last time the binding secret was rotated.

Back to top

Passing Parameters

To set input parameters, you may use the parameters and parametersFrom fields in the spec field of the ServiceInstance or ServiceBinding resource:

parameters : can be used to specify a set of properties to be sent to the broker. The data specified will be passed "as-is" to the broker without any modifications - aside from converting it to JSON for transmission to the broker in the case of the spec field being specified as YAML. Any valid YAML or JSON constructs are supported. Only one parameters field may be specified per spec.
parametersFrom : can be used to specify which secret, and key in that secret, which contains a string that represents the json to include in the set of parameters to be sent to the broker. The parametersFrom field is a list which supports multiple sources referenced per spec.

You may use either, or both, of these fields as needed.

If multiple sources in parameters and parametersFrom blocks are specified, the final payload is a result of merging all of them at the top level. If there are any duplicate properties defined at the top level, the specification is considered to be invalid, the further processing of the ServiceInstance/ServiceBinding resource stops and its status is marked with error condition.

The format of the spec in YAML

spec:
  ...
  parameters:
    name: value
  parametersFrom:
    - secretKeyRef:
        name: my-secret
        key: secret-parameter

The format of the spec in JSON

"spec": {
  "parameters": {
    "name": "value"
  },
  "parametersFrom": {
    "secretKeyRef": {
      "name": "my-secret",
      "key": "secret-parameter"
    }
  }
}

The secret with the secret-parameter- named key:

apiVersion: v1
kind: Secret
metadata:
  name: my-secret
type: Opaque
stringData:
  secret-parameter:
    '{
      "password": "letmein"
    }'

The final JSON payload to send to the broker:

{
  "name": "value",
  "password": "letmein"
}

You can list multiple parameters in the secret. To do so, separate "key": "value" pairs with commas as in this example:

  secret-parameter:
    '{
      "password": "letmein",
      "key2": "value2",
      "key3": "value3"
    }'

Back to top.

Managing Access

By default, the SAP BTP operator has cluster-wide permissions.
You can also limit them to one or more namespaces; for this, you need to set the following two helm parameters:

--set manager.allow_cluster_access=false
--set manager.allowed_namespaces={namespace1, namespace2..}

Note:
If allow_cluster_access is set to true, then allowed_namespaces parameter is ignored.

SAP BTP kubectl Plugin (Experimental)

The SAP BTP kubectl plugin extends kubectl with commands for getting the available services in your SAP BTP account by using the access credentials stored in the cluster.

Prerequisites

jq

Limitations

The SAP BTP kubectl plugin is currently based on bash. If you're using Windows, you should utilize the SAP BTP plugin commands from a linux shell (e.g. Cygwin).

Installation

Download https://github.com/SAP/sap-btp-service-operator/releases/download/<release>/kubectl-sapbtp
Move the executable file to any location in your PATH

The list of available releases: sapbtp-operator releases

Usage

  kubectl sapbtp marketplace -n <namespace>
  kubectl sapbtp plans -n <namespace>
  kubectl sapbtp services -n <namespace>

Use the namespace parameter to specify the location of the secret containing the SAP BTP access credentials.
Usually it is the namespace in which you installed the operator. If not specified, the default namespace is used.

Back to top.

Credentials Rotation

To enable automatic credentials rotation, you need to set the following parameters of the credentialsRotationPolicy field in the spec field of the ServiceBinding resource:

enabled - Whether the credentials rotation option is enabled. Default value is false.
rotationFrequency - Indicates the frequency at which the credentials rotation is performed.
rotatedBindingTTL - Indicates for how long to keep the rotated ServiceBinding.

Valid time units for rotationFrequency and rotatedBindingTTL are: "ns", "us" or ("µs"), "ms", "s", "m", "h".

status.lastCredentialsRotationTime indicates the last time the ServiceBinding secret was rotated.
Please note that credentialsRotationPolicy evaluated and executed during control loop which runs on every update or during full reconciliation process.

During the transition period, there are two (or more) ServiceBinding: the original and the rotated one (holds the services.cloud.sap.com/stale label), which is deleted once the rotatedBindingTTL duration elapses.

You can also choose the services.cloud.sap.com/forceRotate annotation (value doesn't matter), upon which immediate credentials rotation is performed. Note that the prerequisite for the force action is that credentials rotation enabled field is set to true.).

Note:
It isn't possible to enable automatic credentials rotation to an already-rotated ServiceBinding (with the services.cloud.sap.com/stale label).

Back to top

Multitenancy

You can configure the SAP BTP service operator to work with more than one subaccount in the same Kubernetes cluster. This means that different namespaces can be connected to different subaccounts. The association between a namespace and a subaccount is based on a different set of credentials configured for different namespaces.

To connect the namespace to a subaccount, you first have to obtain the access credentials for the SAP BTP service operator and then maintain them in a secret that is specific for that namespace.

There are two options to maintain namespace-specific credentials, and they differ between default and TLS-based access credentials types:

Default Access Credentials

Define a secret named sap-btp-service-operator in the namespace. ServiceInstance and ServiceBinding that are applied in the namespace will belong to the subaccount from which the credentials were issued.
Define different secrets for different namespaces in a centrally managed namespace, following the secret naming convention: sap-btp-service-operator-<namespace>.

Namespace Secret Structure

apiVersion: v1
kind: Secret
metadata:
  name: sap-btp-service-operator
  namespace: <namespace>
type: Opaque
data:
  clientid: "<clientid>"
  clientsecret: "<clientsecret>"
  sm_url: "<sm_url>"
  tokenurl: "<auth_url>"
  tokenurlsuffix: "/oauth/token"

TLS-Based Access Credentials

Define a secret pair named sap-btp-service-operator and sap-btp-service-operator-tls in the namespace. ServiceInstance and ServiceBinding that are applied in the namespace will belong to the subaccount from which the credentials were issued.
Define different secrets for different namespaces in a centrally managed namespace, following the secret naming convention: sap-btp-service-operator-<namespace> and sap-btp-service-operator-tls-<namespace> . For more information, see tls secret.

Namespace Secrets Structure

apiVersion: v1
kind: Secret
metadata:
  name: sap-btp-service-operator
  namespace: <namespace>
type: Opaque
data:
  clientid: "<clientid>"
  sm_url: "<sm_url>"
  tokenurl: "<auth_url>"
  tokenurlsuffix: "/oauth/token"

apiVersion: v1
kind: Secret
metadata:
  name: sap-btp-service-operator-tls
  namespace: <namespace>
type: kubernetes.io/tls
data:
  tls.crt: <crt> #base64 encoded
  tls.key: <key> #base64 encoded

Notes:

If none of the those mentioned above options are set, sap-btp-service-operator secret of a release namespace is used.
See step 4 of the Setup section.

Back to top

Troubleshooting and Support

Cannot Create a Service Binding for Service Instance in `Delete Failed` State

The deletion of my service instance failed. To fix the failure, I have to create a service binding, but I can't do this because the instance is in the Delete Failed state.

Solution

To overcome this issue, use the force_k8s_binding query param when you create a service binding and set it to true (force_k8s_binding=true). You can do & this either with the Service Manager Control CLI (smctl) bind command or 'Create a Service Binding' Service Manager API.

smctl Example

smctl bind INSTANCE_NAME BINDING_NAME --param force_k8s_binding=true

Once you've finished working on the service instance, delete it by running the following command:

smctl unbind INSTANCE_NAME BINDING_NAME --param force_k8s_binding=true

Note: force_k8s_binding is supported only for the Kubernetes instances that are in Delete Failed state.

You're welcome to raise issues related to feature requests, bugs, or give us general feedback on this project's GitHub Issues page. The SAP BTP service operator project maintainers will respond to the best of their abilities.

Back to top

Uninstalling the Operator

Before you uninstall the operator, we recommend you manually delete all associated service instances and bindings. This way, you'll ensure all data stored with service instances and bindings are properly taken care of. Instances and bindings that were not manually deleted will be automatically deleted once you start the uninstallation process.

To uninstall the operator, run the following command: helm uninstall <release name> -n <name space>

Example:

helm uninstall sap-btp-operator -n sap-btp-operator

Responses

release <release name> uninstalled - The operator has been successfully uninstalled
Timed out waiting for condition
- What happened?
  
  The deletion of instances and bindings takes more than 5 minutes, this happens when there is a large number of instances and bindings.
- What to do:
  
  Wait for the job to finish and re-trigger the uninstall process. To check the job status, run kubectl get jobs --namespace=<name space> or log on to the cluster and check the job log. Note that you may have to repeat this step several times untill the un-install process has been successfully completed.
job failed: BackoffLimitExceeded
- What happened?
  
  One of the service instances or bindings could not be deleted.
- What to do:
  
  First find the service instance or binding in question and fix it, then re-trigger the uninstalation.
  
  To find it, log on to the cluster and check the pre-delete job, or check the logs by running the following two commands:
  - kubectl get pods --all-namespaces| grep pre-delete - which gives you the list of all namespaces and jobs
  - kubectl logs <job_name> --namespace=<name_space_name> - where you specify the desired job and namespace
  Note that the pre-delete job is only visible for approximately one minute after the job execution is completed. If you don't have an access to the pre-delete job, use kubectl to view details about the failed resource and check its status by running:
  - kubectl describe <resource_type> <resource_name>
  Check for resources with the deletion timestamp to determine if it tried to be deleted.

Contributions

We currently do not accept community contributions.

License

This project is licensed under Apache 2.0 unless noted otherwise in the license file.

Back to top

Name		Name	Last commit message	Last commit date
Latest commit History 187 Commits
.github		.github
.reuse		.reuse
LICENSES		LICENSES
api		api
client/sm		client/sm
config		config
controllers		controllers
docs		docs
hack		hack
internal		internal
sapbtp-operator-charts		sapbtp-operator-charts
.gitignore		.gitignore
.golangci.yml		.golangci.yml
Dockerfile		Dockerfile
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
go.mod		go.mod
go.sum		go.sum
main.go		main.go

License

ebenda/sap-btp-service-operator

Folders and files

Latest commit

History

Repository files navigation

SAP Business Technology Platform (SAP BTP) Service Operator for Kubernetes

Table of Contents

Architecture

Prerequisites

Setup

Versions

Using the SAP BTP Service Operator

Step 1: Create a service instance

Step 2: Create a Service Binding

Reference Documentation

Service Instance

Spec

Status

Service Binding

Spec

Status

Passing Parameters

Managing Access

SAP BTP kubectl Plugin (Experimental)

Prerequisites

Limitations

Installation

Usage

Credentials Rotation

Multitenancy

Default Access Credentials

Namespace Secret Structure

TLS-Based Access Credentials

Namespace Secrets Structure

Troubleshooting and Support

Cannot Create a Service Binding for Service Instance in Delete Failed State

Uninstalling the Operator

Responses

Contributions

License

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Cannot Create a Service Binding for Service Instance in `Delete Failed` State

Packages