sdqlpy: A Compiled Query Engine for Python

This project is an implementation of the research paper "Building a Compiled Query Engine in Python" that will be presented at the Compiler Construction Conference (CC'23)

Use the following procedure to install sdqlpy and run its TPCH test suite:

Required Linux packages:

sudo su
apt-get install libssl-dev openssl  
apt install libtbb-dev  

Required MacOS packages:

brew install openssl  
brew install tbb@2020  

Note: do the specified exports after TBB installation.

Python building and installation:

This project uses the Python ast library and needs Python version 3.8.10 to be installed on your machine. If you already have this version, ignore this part but make sure that python3 correctly points to the above-mentioned version.

cd ~  
mkdir tmp  
cd tmp  
wget https://www.python.org/ftp/python/3.8.10/Python-3.8.10.tgz  
tar zxvf Python-3.8.10.tgz  
cd Python-3.8.10  
./configure  
make  
make install  
alias python3=/usr/bin/python3.8  

Python dependencies installation:

python3 -m pip install pip  
pip3 install numpy==1.22.0  

Making the datasets ready:

mkdir sdqlpy_test  
cd sdqlpy_test  
git clone https://github.com/edin-dal/tpch-dbgen
cd tpch-dbgen  
make  

Replace the 1 parameter in the following command with the needed scaling factor:

./dbgen -s 1 -vf  
export TPCH_DATASET=$PWD'/'  

Installation of sdqlpy:

git clone https://github.com/edin-dal/sdqlpy  
cd sdqlpy/src  
python3 setup.py build  
python3 setup.py install  

Testing TPCH queries:

cd ../test  

On Linux, sdqlpy enables Hyper-Threading by default. If you want to disable it you need to set the related environment variable to 1 as follows: (on MacOS it must also be set to 1 and user can decide about enabling/disabling it on their machine)

export NO_HYPER_THREADING=1

Inside "test_all.py", configure the sdqlpy_init and the other parameters as explained in the internal comments. Then execute the file as follows:

python3 test_all.py  

Notes:

• The project is still in the development phase and might have portability issues. Please kindly send us the issues you face while using this code.
• TBB and phmap library are heavily used in the auto-generated C++ codes.