Skip to content

Latest commit

 

History

History
227 lines (169 loc) · 8.4 KB

README.rst

File metadata and controls

227 lines (169 loc) · 8.4 KB

Using OpenLANE to Harden Your Design

You can utilize the Makefile existing here in this directory to do that.

But, first you need to specify 2 things:

export PDK_ROOT=<The location where the pdk is installed>
export OPENLANE_ROOT=<the absolute path to the openlane directory cloned or to be cloned>

If you don't have openlane already, then you can get it from here.

NOTE:

We are developing caravel using the latest openlane release v0.12. This will be continuously updated to the latest openlane tag until we reach a stable version of caravel.

Then, you have two options:

  1. Create a macro for your design and harden it, then insert it into user_project_wrapper.
  2. Flatten your design with the user_project_wrapper and harden them as one.

NOTE:

The OpenLANE documentation should cover everything you might need to create your design. You can find that here.

Option 1: Inserting your design macro into the wrapper

This could be done by creating a directory for your design under the <your_user_project_root>/openlane/<my-design> and adding a configuration file for it under the same directory. You can follow the instructions given here to generate an initial configuration file for your design, or you can start with the following:

set script_dir [file dirname [file normalize [info script]]]

set ::env(DESIGN_NAME) <Your Design Name>

set ::env(DESIGN_IS_CORE) 0
set ::env(FP_PDN_CORE_RING) 0
set ::env(GLB_RT_MAXLAYER) 5

set ::env(VERILOG_FILES) "$script_dir/../../verilog/rtl/<Your RTL.v>"

set ::env(CLOCK_PORT) <Clock port name if it exists>
set ::env(CLOCK_PERIOD) <Desired clock period>

Then you can add any other configurations as you see fit to get the desired DRC/LVS clean outcome.

After that, run the following command from your <your_user_project_root>/openlane/:

make <your design directory name>

Then, follow the instructions given in Option 2.

NOTE:

You might have other macros inside your design. In which case, you may need to have some special power configurations. This is covered here.

Option 2: Flattening your design with the wrapper

  1. Add your design to the RTL of the user_project_wrapper.

  2. Modify the configuration file here to include any extra files you may need. Make sure to change these accordingly:

    set ::env(CLOCK_NET) "mprj.clk"
    set ::env(VERILOG_FILES) " \
          $script_dir/../../verilog/rtl/defines.v \
          $script_dir/../../verilog/rtl/user_project_wrapper.v"
    
    set ::env(VERILOG_FILES_BLACKBOX) " \
          $script_dir/../../verilog/rtl/defines.v \
          $script_dir/../../verilog/rtl/user_proj_example.v"
    
    set ::env(EXTRA_LEFS) " \
       $script_dir/../../lef/user_proj_example.lef"
    
    set ::env(EXTRA_GDS_FILES) " \
       $script_dir/../../gds/user_proj_example.gds"
  3. If your design has standard cells then you need to modify the configuration file here to remove or change these configs accordingly:

    # The following is because there are no std cells in the example wrapper project.
    set ::env(SYNTH_TOP_LEVEL) 1
    set ::env(PL_RANDOM_GLB_PLACEMENT) 1
    set ::env(PL_OPENPHYSYN_OPTIMIZATIONS) 0
    set ::env(DIODE_INSERTION_STRATEGY) 0
    set ::env(FILL_INSERTION) 0
    set ::env(TAP_DECAP_INSERTION) 0
    set ::env(CLOCK_TREE_SYNTH) 0
  4. Remove this line set ::env(MACRO_PLACEMENT_CFG) $script_dir/macro.cfg from the configuration file here entirely if you have no macros. Alternatively, if you do have macros inside your design, then control their placement by modifying this file

  5. Run your design through the flow: make user_project_wrapper

  6. You may want to take a look at the Extra Pointers to apply any necessary changes to the interactive script.

  7. Re-iterate until you have what you want.

NOTE:

In both cases you might have other macros inside your design. In which case, you may need to have some special power configurations. This is covered here.

WARNING:

Don't change the size or the pin order!

Extra Pointers

  • The OpenLANE documentation should cover everything you might need to create your design. You can find that here.
  • The OpenLANE FAQs can guide through your troubles.
  • Here you can find all the configurations and how to use them.
  • Here you can learn how to write an interactive script.
  • Here you can find a full documentation for all OpenLANE commands.
  • This documentation describes how to use the exploration script to achieve an LVS/DRC clean design.
  • This documentation walks you through hardening a macro and all the decisions you should make.