Error when adding pool_contract_address

[ladiaz1028]

THIS IS MY CONFIG FILE:

# Default/example plotman.yaml configuration file

# https://github.com/ericaltendorf/plotman/wiki/Configuration#versions
version: [2]

logging:
        # One directory in which to store all plot job logs (the STDOUT/
        # STDERR of all plot jobs).  In order to monitor progress, plotman
        # reads these logs on a regular basis, so using a fast drive is
        # recommended.
        plots: /home/chia-plotter/chialogs
        # transfers:
        # application:

# Options for display and rendering
user_interface:
        # Call out to the `stty` program to determine terminal size, instead of
        # relying on what is reported by the curses library.   In some cases,
        # the curses library fails to update on SIGWINCH signals.  If the
        # `plotman interactive` curses interface does not properly adjust when
        # you resize the terminal window, you can try setting this to True. 
        use_stty_size: True

# Optional custom settings for the subcommands (status, interactive etc)
commands:
        interactive:
                # Set it to False if you don't want to auto start plotting when 'interactive' is ran.
                # You can override this value from the command line, type "plotman interactive -h" for details
                autostart_plotting: True
                autostart_archiving: True

# Where to plot and log.
directories:
        # One or more directories to use as tmp dirs for plotting.  The
        # scheduler will use all of them and distribute jobs among them.
        # It assumes that IO is independent for each one (i.e., that each
        # one is on a different physical device).
        #
        # If multiple directories share a common prefix, reports will
        # abbreviate and show just the uniquely identifying suffix.
        tmp:
                - /mnt/ssd1
                - /mnt/ssd2
                - /mnt/ssd3
                - /mnt/ssd4
                - /mnt/ssd5
                - /mnt/ssd6
                - /mnt/ssd7
                - /mnt/ssd8

        # Optional: tmp2 directory.  If specified, will be passed to
        # chia plots create as -2.  Only one tmp2 directory is supported.
        # tmp2: /mnt/tmp/a

        # Optional: A list of one or more directories; the scheduler will
        # use all of them.  These again are presumed to be on independent
        # physical devices so writes (plot jobs) and reads (archivals) can
        # be scheduled to minimize IO contention.
        # 
        # If dst is commented out, the tmp directories will be used as the
        # buffer.
        dst:
                - /mnt/tempa
                - /mnt/tempb
                - /mnt/tempc

# Archival configuration.  Optional; if you do not wish to run the
# archiving operation, comment this section out.  Almost everyone
# should be using the archival feature.  It is meant to distribute
# plots among multiple disks filling them all.  This can be done both
# to local and to remote disks.
#
# As of v0.4, archiving commands are highly configurable.  The basic
# configuration consists of a script for checking available disk space
# and another for actually transferring plots.  Each can be specified
# as either a path to an existing script or inline script contents.
# It is expected that most people will use existing recipes and will
# adjust them by specifying environment variables that will set their
# system specific values.  These can be provided to the scripts via
# the `env` key.  plotman will additionally provide `source` and
# `destination` environment variables to the transfer script so it
# knows the specifically selected items to process.  plotman also needs
# to be able to generally detect if a transfer process is already
# running.  To be able to identify externally launched transfers, the
# process name and an argument prefix to match must be provided.  Note
# that variable substitution of environment variables including those
# specified in the env key can be used in both process name and process
# argument prefix elements but that they use the python substitution
# format.
#
# Complete example: https://github.com/ericaltendorf/plotman/wiki/Archiving
archiving:
  target: rsyncd
  index: 0
  env:
    site_root: /mnt
    user: chia-harvester
    host: 1.2.3.4
    rsync_port: 12000
    site: chia
    options: --bwlimit=100000 --prellocate --remove-source-files --skip-compress plot --whole-file

# Plotting scheduling parameters
scheduling:
        # Run a job on a particular temp dir only if the number of existing jobs
        # before [tmpdir_stagger_phase_major : tmpdir_stagger_phase_minor]
        # is less than tmpdir_stagger_phase_limit.
        # Phase major corresponds to the plot phase, phase minor corresponds to
        # the table or table pair in sequence, phase limit corresponds to
        # the number of plots allowed before [phase major : phase minor].
        # e.g, with default settings, a new plot will start only when your plot
        # reaches phase [2 : 1] on your temp drive. This setting takes precidence
        # over global_stagger_m
        tmpdir_stagger_phase_major: 1
        tmpdir_stagger_phase_minor: 1
        # Optional: default is 1
        tmpdir_stagger_phase_limit: 1

        # Don't run more than this many jobs at a time on a single temp dir.
        tmpdir_max_jobs: 5

        # Don't run more than this many jobs at a time in total.
        global_max_jobs: 40

        # Don't run any jobs (across all temp dirs) more often than this, in minutes.
        global_stagger_m: 18

        # How often the daemon wakes to consider starting a new plot job, in seconds.
        polling_time_s: 30

        # Optional: Allows the overriding of some scheduling characteristics of the
        # tmp directories specified here.
        # This contains a map of tmp directory names to attributes. If a tmp directory 
        # and attribute is not listed here, the default attribute setting from the main 
        # configuration will be used
        #
        # Currently support override parameters:
        #     - tmpdir_stagger_phase_major (requires tmpdir_stagger_phase_minor)
        #     - tmpdir_stagger_phase_minor (requires tmpdir_stagger_phase_major)
        #     - tmpdir_stagger_phase_limit
        #     - tmpdir_max_jobs
        tmp_overrides:
                # In this example, /mnt/tmp/00 is larger and faster than the
                # other tmp dirs and it can hold more plots than the default,
                # allowing more simultaneous plots, so they are being started
                # earlier than the global setting above.
               # "/mnt/tmp/00":
                  #      tmpdir_stagger_phase_major: 1
                    #    tmpdir_stagger_phase_minor: 5
                        #tmpdir_max_jobs: 5
                # Here, /mnt/tmp/03 is smaller, so a different config might be
                # to space the phase stagger further apart and only allow 2 jobs
                # to run concurrently in it
                #"/mnt/tmp/03":
                       # tmpdir_stagger_phase_major: 3
                       # tmpdir_stagger_phase_minor: 1
                       # tmpdir_max_jobs: 2

# Plotting parameters.  These are pass-through parameters to chia plots create.
# See documentation at
# https://github.com/Chia-Network/chia-blockchain/wiki/CLI-Commands-Reference#create
plotting:
        # Your public keys: Be sure to use the pool contract address for
        # portable pool plots. The pool public key is only for the original 
        # non-portable plots that can not be used with the official pooling
        # protocol.
        # farmer_pk: ...
        # pool_pk: ...
           pool_contract_address: ........

        # If you enable Chia, plot in *parallel* with higher tmpdir_max_jobs and global_max_jobs
        type: chia
        chia:
                # The stock plotter: https://github.com/Chia-Network/chia-blockchain
                k: 32                # k-size of plot, leave at 32 most of the time
                e: False             # Use -e plotting option
                n_threads: 4         # Threads per job
                n_buckets: 128       # Number of buckets to split data into
                job_buffer: 8000     # Per job memory

        # If you enable madMAx, plot in *sequence* with very low tmpdir_max_jobs and global_max_jobs
        madmax:
                # madMAx plotter: https://github.com/madMAx43v3r/chia-plotter
                n_threads: 4          # Default is 4, crank up if you have many cores
                n_buckets: 256        # Default is 256

THIS IS THE ERROR I GET WHEN I DO PLOTMAN PLOT:

Traceback (most recent call last):
  File "/home/chia-plotter/chia-blockchain/venv/bin/plotman", line 8, in <module>
    sys.exit(main())
  File "/home/chia-plotter/chia-blockchain/venv/lib/python3.8/site-packages/plotman/plotman.py", line 169, in main
    cfg = configuration.get_validated_configs(config_text, config_path, preset_target_definitions_text)
  File "/home/chia-plotter/chia-blockchain/venv/lib/python3.8/site-packages/plotman/configuration.py", line 52, in get_validated_configs
    config_objects = yaml.load(config_text, Loader=yaml.SafeLoader)
  File "/home/chia-plotter/chia-blockchain/venv/lib/python3.8/site-packages/yaml/__init__.py", line 114, in load
    return loader.get_single_data()
  File "/home/chia-plotter/chia-blockchain/venv/lib/python3.8/site-packages/yaml/constructor.py", line 49, in get_single_data
    node = self.get_single_node()
  File "/home/chia-plotter/chia-blockchain/venv/lib/python3.8/site-packages/yaml/composer.py", line 36, in get_single_node
    document = self.compose_document()
  File "/home/chia-plotter/chia-blockchain/venv/lib/python3.8/site-packages/yaml/composer.py", line 55, in compose_document
    node = self.compose_node(None, None)
  File "/home/chia-plotter/chia-blockchain/venv/lib/python3.8/site-packages/yaml/composer.py", line 84, in compose_node
    node = self.compose_mapping_node(anchor)
  File "/home/chia-plotter/chia-blockchain/venv/lib/python3.8/site-packages/yaml/composer.py", line 127, in compose_mapping_node
    while not self.check_event(MappingEndEvent):
  File "/home/chia-plotter/chia-blockchain/venv/lib/python3.8/site-packages/yaml/parser.py", line 98, in check_event
    self.current_event = self.state()
  File "/home/chia-plotter/chia-blockchain/venv/lib/python3.8/site-packages/yaml/parser.py", line 438, in parse_block_mapping_key
    raise ParserError("while parsing a block mapping", self.marks[-1],
yaml.parser.ParserError: while parsing a block mapping
  in "<unicode string>", line 4, column 1:
    version: [2]
    ^
expected <block end>, but found '<block mapping start>'
  in "<unicode string>", line 172, column 9:
            type: chia
            ^

Not sure what im doing wrong, any help would be greatly appreciated. Also if I remove the pool_contract_address it will plot just fine

[altendky]

Your pool contract address is indented incorrectly. It should be at the same level as type: and chia: below it. You have to get indentation right for yaml.

[ladiaz1028]

Thank you so much!! Working now.