VzBoT330 - Al

This repo contains all the config files, macros and stls that I printed after collecting them from various sources. Some of the parts were also designed by myself when I could not find something suitable for my for my VzBoT330.

I started with an X5SA (just the normal 330 one). I upgraded my X5SA with the following in order, to make it the VzBoT as it stands now:

1. Klipper on X5SA board, with RPi 2B.
2. E3D Volcano hotend (0.6mm nozzle) - Mount: https://www.printables.com/model/181860-boxi-mount-v6-bmg-aio-mount
3. Mellow Fly Super 8 (Infinity) board and 2209 stepper drivers. (JayUK)
4. Euclid probe (https://euclidprobe.github.io/) (JayUK)
5. Rock 4 SE board, upgraded from RPi 2B (https://www.okdo.com/us/p/okdo-rock-4-model-se-4gb-single-board-computer-rockchip-rk3399-t-arm-cortex-a72-cortex-a53/)
6. PEI hotbed sheet (https://www.amazon.co.uk/Toaiot-330x330mm-Sheet%EF%BC%8C13x13-Compatible-Tronxy-X5S/dp/B0BX969VV3/ref=sr_1_28?crid=3U4EJ0HHJTPK3&keywords=pei+sheet+330&qid=1680214114&sprefix=pei+sheet+330%2Caps%2C69&sr=8-28)
7. Vz Gantry (https://github.com/VzBoT3D/VzBoT-Vz330/tree/master/Assemblies%20BOM%20and%20STL/Gantry) - usongshine Linear Rails Parts + Printed
8. Sherpa Mini Extruder
9. Vz Z Assembly (https://github.com/VzBoT3D/VzBoT-Vz330/tree/master/Assemblies%20BOM%20and%20STL/Z%20assembly) - Mellow Parts
10. Vz Printed Printhead (https://github.com/VzBoT3D/Vz-Printhead-Printed)
11. Goliath hotend (https://github.com/VzBoT3D/Goliath) - Mellow
12. KUSBA Accelerometer (https://github.com/xbst/KUSBA) (https://www.printyplease.uk/Accessories/KUSBA)
13. Beacon Probe (upgraded from Euclid Probe) (https://beacon3d.com/)
14. Upgraded Mellow PEI double sided sheet (Smooth and Textured) - Mellow
15. CPAP - Parts from Mellow - More info in the readme in the CPAP folder

Ongoing:

1. Back plate for electronics

TO DO:

1. Enclosure including Top Hat (https://christmas3dp.com/product-category/vzbot/)

I plan on keeping this repo as up-to-date as possible with my current set up.

Current config

1. Klipper on Rock 4 SE (Radxa build of Debian Bullseye CLI only). Klipper configured using KIUAH (https://github.com/th33xitus/kiauh)
2. KAMP (https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging)
3. Timelapse

I used KIUAH to install:

1. Klipper
2. Mainsail
3. Moonraker
4. Crowsnest
5. OctoEverywhere