Add one or more procmacros crates
#4
Labels
help wanted
Extra attention is needed
Comments
|
I plan on looking into the ram macro. Seems the ESP32C3 linker scripts need some changes. I'd also like to look into an easy way to support both, direct-boot and non-direct-boot. The interrupt macro probable makes more sense together with the general implementation of interrupt support |
JurajSadel
referenced
this issue
in JurajSadel/esp-hal
Feb 22, 2023
* Add direct boot support for C6 * Fix direct boot for c6 - Actually copy into rtc ram - remove dummy section that is no longer needed (was just a waste of flash space) - Move RTC stuff before the no load sections
JurajSadel
referenced
this issue
in JurajSadel/esp-hal
Feb 27, 2023
* Add direct boot support for C6 * Fix direct boot for c6 - Actually copy into rtc ram - remove dummy section that is no longer needed (was just a waste of flash space) - Move RTC stuff before the no load sections
jessebraham
added a commit
that referenced
this issue
Feb 27, 2023
* Create the `esp32c6-hal` package * Teach `esp-hal-common` about the ESP32-C6 * Get a number of peripheral drivers building for the ESP32-C6 bckup initial clocks_ii * Create the `esp32c6-hal` package C6: update * Simplify and fix the linker script update * C6: add I2S * Create the `esp32c6-hal` package * Teach `esp-hal-common` about the ESP32-C6 * Get a number of peripheral drivers building for the ESP32-C6 bckup initial clocks_ii * Create the `esp32c6-hal` package * C6: update * Simplify and fix the linker script * update * C6: add I2S * update * C6 Interrupts * C6: Update build.rs, linker scripts and initial examples * C6: RMT * Fix interrupt handling * Fix `ClockControl::configure` * C6: revert to I2S0 instead of just I2S * C6: rebase and update * RTC not buildable * Implement RWDT and SWD disable * C6: working LEDC * C6: working RMT * C6: add aes * C6: add mcpwm * C6: add rtc_cntln - not finished * C6: update and formatting * C6: add pcnt * C6: add examples and format * Remove inline assembly, fix interrupts and linker scripts * Remove unused features, update cargo config for atomic emu, misc cleanup * Get ADC building and example "working" (as much as it ever does) * Remove a bunch of unused constants which were copied from ESP-IDF * The `mcpwm` example now works correctly * Get `TWAI` peripheral driver building for C6 * Clean up the `rtc_cntl` module and get all the other HALs building again * Add the C6 to our CI workflow * Fix various things that have been missed when rebasing Still missing a few examples (`clock_monitor`, `embassy_spi`, `ram`) * C6: Small updates in wdt (#1) * C6: Update WDT * C6: Update examples with WDT update * Update `esp-println` dependency to fix build errors * Fix formatting issues causing pre-commit hook to fail * Get some more examples working * Working `ram` example * Sync with changes in `main` after rebasing * Working `embassy_spi` example * Use a git dependency for the PAC until we publish a release * Fix I2S for ESP32-C6 * Fix esp32c6 direct boot (#4) * Add direct boot support for C6 * Fix direct boot for c6 - Actually copy into rtc ram - remove dummy section that is no longer needed (was just a waste of flash space) - Move RTC stuff before the no load sections * Update RWDT and refactor RTC (#3) * C6: Update RWDT and add example, refactor RTC and add not-really-good example * Update based on review comments, resolve bunch of warnings and run cargo fmt * Update C6 esp-pacs rev commit * Fix clocks_ll/esp32c6.rs * Fix riscv interrupts * Remove clock_monitor example for now * RAM example works in direct-boot mode * Add a TODO for &mut TIMG0 and cargo fmt * Fix linker script after a bad rebase * Update CI and Cargo.toml embassy required features * use riscv32imac-unknown-none-elf target for C6 in CI * change default target to riscv32imac-unknown-none-elf * add riscv32imac-unknown-none-elf target to MSRV job * another cleanup --------- Co-authored-by: bjoernQ <bjoern.quentin@mobile-j.de> Co-authored-by: Jesse Braham <jesse@beta7.io> * Make required changes to include new `RADIO` peripheral * Use published versions of PAC and `esp-println` * Use the correct target extensions (`imac`) * Fix the super watchdog timer, plus a few more examples * Fix UART clock configuration * Make sure to sync UART registers when configuring AT cmd detection * Disable APM in direct-boot mode * Address a number of review comments * Fix `SPI` clocks and `rtc_watchdog` example (#6) * fix SPI clocks * run cargo fmt * Add comment about used default clk src * Fix rtc_watchdog example in BL mode * run cargo fmt * Update rtc_watchdog example that it works in DB mode * README and example fixes/cleanup * Add I2C peripheral enable and reset * Fix `ApbSarAdc` configuration in `system.rs` --------- Co-authored-by: bjoernQ <bjoern.quentin@mobile-j.de> Co-authored-by: Juraj Sadel <juraj.sadel@espressif.com> Co-authored-by: Juraj Sadel <jurajsadel@gmail.com> Co-authored-by: Scott Mabin <scott@mabez.dev>
MabezDev
added a commit
to MabezDev/esp-hal
that referenced
this issue
Mar 31, 2023
* Create the `esp32c6-hal` package * Teach `esp-hal-common` about the ESP32-C6 * Get a number of peripheral drivers building for the ESP32-C6 bckup initial clocks_ii * Create the `esp32c6-hal` package C6: update * Simplify and fix the linker script update * C6: add I2S * Create the `esp32c6-hal` package * Teach `esp-hal-common` about the ESP32-C6 * Get a number of peripheral drivers building for the ESP32-C6 bckup initial clocks_ii * Create the `esp32c6-hal` package * C6: update * Simplify and fix the linker script * update * C6: add I2S * update * C6 Interrupts * C6: Update build.rs, linker scripts and initial examples * C6: RMT * Fix interrupt handling * Fix `ClockControl::configure` * C6: revert to I2S0 instead of just I2S * C6: rebase and update * RTC not buildable * Implement RWDT and SWD disable * C6: working LEDC * C6: working RMT * C6: add aes * C6: add mcpwm * C6: add rtc_cntln - not finished * C6: update and formatting * C6: add pcnt * C6: add examples and format * Remove inline assembly, fix interrupts and linker scripts * Remove unused features, update cargo config for atomic emu, misc cleanup * Get ADC building and example "working" (as much as it ever does) * Remove a bunch of unused constants which were copied from ESP-IDF * The `mcpwm` example now works correctly * Get `TWAI` peripheral driver building for C6 * Clean up the `rtc_cntl` module and get all the other HALs building again * Add the C6 to our CI workflow * Fix various things that have been missed when rebasing Still missing a few examples (`clock_monitor`, `embassy_spi`, `ram`) * C6: Small updates in wdt (esp-rs#1) * C6: Update WDT * C6: Update examples with WDT update * Update `esp-println` dependency to fix build errors * Fix formatting issues causing pre-commit hook to fail * Get some more examples working * Working `ram` example * Sync with changes in `main` after rebasing * Working `embassy_spi` example * Use a git dependency for the PAC until we publish a release * Fix I2S for ESP32-C6 * Fix esp32c6 direct boot (esp-rs#4) * Add direct boot support for C6 * Fix direct boot for c6 - Actually copy into rtc ram - remove dummy section that is no longer needed (was just a waste of flash space) - Move RTC stuff before the no load sections * Update RWDT and refactor RTC (esp-rs#3) * C6: Update RWDT and add example, refactor RTC and add not-really-good example * Update based on review comments, resolve bunch of warnings and run cargo fmt * Update C6 esp-pacs rev commit * Fix clocks_ll/esp32c6.rs * Fix riscv interrupts * Remove clock_monitor example for now * RAM example works in direct-boot mode * Add a TODO for &mut TIMG0 and cargo fmt * Fix linker script after a bad rebase * Update CI and Cargo.toml embassy required features * use riscv32imac-unknown-none-elf target for C6 in CI * change default target to riscv32imac-unknown-none-elf * add riscv32imac-unknown-none-elf target to MSRV job * another cleanup --------- Co-authored-by: bjoernQ <bjoern.quentin@mobile-j.de> Co-authored-by: Jesse Braham <jesse@beta7.io> * Make required changes to include new `RADIO` peripheral * Use published versions of PAC and `esp-println` * Use the correct target extensions (`imac`) * Fix the super watchdog timer, plus a few more examples * Fix UART clock configuration * Make sure to sync UART registers when configuring AT cmd detection * Disable APM in direct-boot mode * Address a number of review comments * Fix `SPI` clocks and `rtc_watchdog` example (esp-rs#6) * fix SPI clocks * run cargo fmt * Add comment about used default clk src * Fix rtc_watchdog example in BL mode * run cargo fmt * Update rtc_watchdog example that it works in DB mode * README and example fixes/cleanup * Add I2C peripheral enable and reset * Fix `ApbSarAdc` configuration in `system.rs` --------- Co-authored-by: bjoernQ <bjoern.quentin@mobile-j.de> Co-authored-by: Juraj Sadel <juraj.sadel@espressif.com> Co-authored-by: Juraj Sadel <jurajsadel@gmail.com> Co-authored-by: Scott Mabin <scott@mabez.dev>
i404788
pushed a commit
to i404788/esp-hal
that referenced
this issue
Jul 22, 2023
* Create the `esp32c6-hal` package * Teach `esp-hal-common` about the ESP32-C6 * Get a number of peripheral drivers building for the ESP32-C6 bckup initial clocks_ii * Create the `esp32c6-hal` package C6: update * Simplify and fix the linker script update * C6: add I2S * Create the `esp32c6-hal` package * Teach `esp-hal-common` about the ESP32-C6 * Get a number of peripheral drivers building for the ESP32-C6 bckup initial clocks_ii * Create the `esp32c6-hal` package * C6: update * Simplify and fix the linker script * update * C6: add I2S * update * C6 Interrupts * C6: Update build.rs, linker scripts and initial examples * C6: RMT * Fix interrupt handling * Fix `ClockControl::configure` * C6: revert to I2S0 instead of just I2S * C6: rebase and update * RTC not buildable * Implement RWDT and SWD disable * C6: working LEDC * C6: working RMT * C6: add aes * C6: add mcpwm * C6: add rtc_cntln - not finished * C6: update and formatting * C6: add pcnt * C6: add examples and format * Remove inline assembly, fix interrupts and linker scripts * Remove unused features, update cargo config for atomic emu, misc cleanup * Get ADC building and example "working" (as much as it ever does) * Remove a bunch of unused constants which were copied from ESP-IDF * The `mcpwm` example now works correctly * Get `TWAI` peripheral driver building for C6 * Clean up the `rtc_cntl` module and get all the other HALs building again * Add the C6 to our CI workflow * Fix various things that have been missed when rebasing Still missing a few examples (`clock_monitor`, `embassy_spi`, `ram`) * C6: Small updates in wdt (#1) * C6: Update WDT * C6: Update examples with WDT update * Update `esp-println` dependency to fix build errors * Fix formatting issues causing pre-commit hook to fail * Get some more examples working * Working `ram` example * Sync with changes in `main` after rebasing * Working `embassy_spi` example * Use a git dependency for the PAC until we publish a release * Fix I2S for ESP32-C6 * Fix esp32c6 direct boot (esp-rs#4) * Add direct boot support for C6 * Fix direct boot for c6 - Actually copy into rtc ram - remove dummy section that is no longer needed (was just a waste of flash space) - Move RTC stuff before the no load sections * Update RWDT and refactor RTC (esp-rs#3) * C6: Update RWDT and add example, refactor RTC and add not-really-good example * Update based on review comments, resolve bunch of warnings and run cargo fmt * Update C6 esp-pacs rev commit * Fix clocks_ll/esp32c6.rs * Fix riscv interrupts * Remove clock_monitor example for now * RAM example works in direct-boot mode * Add a TODO for &mut TIMG0 and cargo fmt * Fix linker script after a bad rebase * Update CI and Cargo.toml embassy required features * use riscv32imac-unknown-none-elf target for C6 in CI * change default target to riscv32imac-unknown-none-elf * add riscv32imac-unknown-none-elf target to MSRV job * another cleanup --------- Co-authored-by: bjoernQ <bjoern.quentin@mobile-j.de> Co-authored-by: Jesse Braham <jesse@beta7.io> * Make required changes to include new `RADIO` peripheral * Use published versions of PAC and `esp-println` * Use the correct target extensions (`imac`) * Fix the super watchdog timer, plus a few more examples * Fix UART clock configuration * Make sure to sync UART registers when configuring AT cmd detection * Disable APM in direct-boot mode * Address a number of review comments * Fix `SPI` clocks and `rtc_watchdog` example (esp-rs#6) * fix SPI clocks * run cargo fmt * Add comment about used default clk src * Fix rtc_watchdog example in BL mode * run cargo fmt * Update rtc_watchdog example that it works in DB mode * README and example fixes/cleanup * Add I2C peripheral enable and reset * Fix `ApbSarAdc` configuration in `system.rs` --------- Co-authored-by: bjoernQ <bjoern.quentin@mobile-j.de> Co-authored-by: Juraj Sadel <juraj.sadel@espressif.com> Co-authored-by: Juraj Sadel <jurajsadel@gmail.com> Co-authored-by: Scott Mabin <scott@mabez.dev>
jessebraham
added a commit
that referenced
this issue
Mar 4, 2024
* Remove referecnes to chip-specific HALs, briefly describe esp-hal tree and add quickstart * Review comments * Update esp-hal/README.md Co-authored-by: Jesse Braham <jessebraham@users.noreply.github.com> * Update esp-hal/README.md Co-authored-by: Jesse Braham <jessebraham@users.noreply.github.com> * Update esp-hal/README.md Co-authored-by: Scott Mabin <scott@mabez.dev> * review comments 2 * link examples/README * Mostly rewrite `esp-hal/README.md` (oops :) ) (#4) * Mostly rewrite `esp-hal/README.md` (oops :) ) * Fix a typo --------- Co-authored-by: Jesse Braham <jessebraham@users.noreply.github.com> Co-authored-by: Scott Mabin <scott@mabez.dev>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I'm specifically interested in the
#[ram]and#[interrupt]attributes that are generally implemented by theprocmacroscrate. An example of this can be seen in the esp32-hal repository.I imagine this may be tricky to get working for all chips, so it's possible more than one implementation may be necessary. I have not looked into this enough to know whether or not that is the case at this time.
The text was updated successfully, but these errors were encountered: