New package releases

CHANGELOG.md

@@ -7,9 +7,10 @@ Please note that only changes to the `esp-hal-common` package are tracked in thi
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-## [Unreleased]
+## [0.14.0] - 2023-12-12
 
 ### Added
+
 - ESP32-C6: LP core clock is configurable (#907)
 - Derive `Clone` and `Copy` for `EspTwaiFrame` (#914)
 - A way to configure inverted pins (#912)
@@ -26,12 +27,12 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 - Improve DMA documentation & clean up module (#915)
 - Only allow a single version of `esp-hal-common` to be present in an application (#934)
-- C3, C6 and H2 can now use the `zero-rtc-bss` feature to enable `esp-hal-common/rv-zero-rtc-bss` (#867)
+- ESP32-C3/C6 and ESP32-H2 can now use the `zero-rtc-bss` feature to enable `esp-hal-common/rv-zero-rtc-bss` (#867)
 - Reuse `ieee802154_clock_enable/disable()` functions for BLE and rename `ble_ieee802154_clock_enable()` (#953)
 - The `embedded-io` trait implementations are now gated behind the `embedded-io` feature (#964)
 - Simplifed RMT channels and channel creators (#958)
 - Reworked construction of I2S driver instances (#983)
-- S2 / S3: Don't require GPIO 18 to create a USB peripheral driver instance (#990)
+- ESP32-S2/S3: Don't require GPIO 18 to create a USB peripheral driver instance (#990)
 - Updated to latest release candidate (`1.0.0-rc.2`) for `embedded-hal{-async,-nb}` (#994)
 - Explicit panic when hitting the `DefaultHandler` (#1005)
 - Relevant interrupts are now auto enabled in `embassy::init` (#1014).
@@ -52,14 +53,17 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 ### Removed
 
+- Direct boot support has been removed (#903).
 - Removed the `mcu-boot` feature from `esp32c3-hal` (#938)
 - Removed SpiBusController and SpiBusDevice in favour of embedded-hal-bus and embassy-embedded-hal implementataions. (#978)
 
 ### Breaking
-- Direct boot support has been removed (#903).
+
 - `Spi::new`/`Spi::new_half_duplex` takes no gpio pin now, instead you need to call `with_pins` to setup those (#901).
-- ESP32C2, ESP32C3, ESP32S2: atomic emulation trap has been removed. When upgrading you must either remove [these lines](https://github.com/esp-rs/riscv-atomic-emulation-trap#usage) from your `.cargo/config.toml`. Usage of `core::sync::atomic::*` in dependent crates should be replaced with [portable-atomic](https://github.com/taiki-e/portable-atomic). (#904) (#985)
-- RSA driver now takes u32 words instead of u8 bytes. The expected slice length is now 4 times shorter. (#981)
+- ESP32-C2, ESP32-C3, ESP32-S2: atomic emulation trap has been removed. (#904) (#985)
+    - When upgrading you must either remove [these lines](https://github.com/esp-rs/riscv-atomic-emulation-trap#usage) from your `.cargo/config.toml`.
+    - Usage of `core::sync::atomic::*` in dependent crates should be replaced with [portable-atomic](https://github.com/taiki-e/portable-atomic).
+- RSA driver now takes `u32` words instead of `u8` bytes. The expected slice length is now 4 times shorter. (#981)
 
 ## [0.13.1] - 2023-11-02
 
@@ -337,7 +341,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 ## [0.1.0] - 2022-08-05
 
-[Unreleased]: https://github.com/esp-rs/esp-hal/compare/v0.13.1...HEAD
+[0.14.0]: https://github.com/esp-rs/esp-hal/compare/v0.13.1...v0.14.0
 [0.13.1]: https://github.com/esp-rs/esp-hal/compare/v0.13.0...v0.13.1
 [0.13.0]: https://github.com/esp-rs/esp-hal/compare/v0.12.0...v0.13.0
 [0.12.0]: https://github.com/esp-rs/esp-hal/compare/v0.11.0...v0.12.0

README.md

@@ -76,8 +76,8 @@ For information about the HAL and how to use it in your own projects, please ref
 
 |        Crate        |       Documentation        |             Target             |
 | :-----------------: | :------------------------: | :----------------------------: |
-| [esp-ulp-riscv-hal] | N/A (_Not yet ppublished_) | `riscv32imc-unknown-none-elf`  |
-|  [esp32c6-lp-hal]   | N/A (_Not yet ppublished_) | `riscv32imac-unknown-none-elf` |
+| [esp-ulp-riscv-hal] | N/A (_Not yet published_) | `riscv32imc-unknown-none-elf`  |
+|  [esp32c6-lp-hal]   | N/A (_Not yet published_) | `riscv32imac-unknown-none-elf` |
 
 [esp-ulp-riscv-hal]: https://github.com/esp-rs/esp-hal/tree/main/esp-ulp-riscv-hal
 [esp32c6-lp-hal]: https://github.com/esp-rs/esp-hal/tree/main/esp32c6-lp-hal

esp-hal-common/Cargo.toml

@@ -1,10 +1,6 @@
 [package]
-name    = "esp-hal-common"
-version = "0.13.1"
-authors = [
-    "Jesse Braham <jesse@beta7.io>",
-    "Björn Quentin <bjoern.quentin@mobile-j.de>",
-]
+name         = "esp-hal-common"
+version      = "0.14.0"
 edition      = "2021"
 rust-version = "1.67.0"
 description  = "HAL implementations for peripherals common among Espressif devices; should not be used directly"
@@ -33,12 +29,12 @@ embedded-io          = { version = "0.6.1", optional = true }
 enumset              = "1.1.3"
 esp-synopsys-usb-otg = { version = "0.4.0", optional = true, features = ["fs", "esp32sx"] }
 fugit                = "0.3.7"
-heapless             = "0.8"
+heapless             = "0.8.0"
 log                  = { version = "0.4.20", optional = true }
 nb                   = "1.1.0"
 paste                = "1.0.14"
-portable-atomic      = { version = "1.5.1", default-features = false }
-procmacros           = { version = "0.7.0", features = ["enum-dispatch", "ram"], package = "esp-hal-procmacros", path = "../esp-hal-procmacros" }
+portable-atomic      = { version = "1.6.0", default-features = false }
+procmacros           = { version = "0.8.0", features = ["enum-dispatch", "ram"], package = "esp-hal-procmacros", path = "../esp-hal-procmacros" }
 strum                = { version = "0.25.0", default-features = false, features = ["derive"] }
 void                 = { version = "1.0.2", default-features = false }
 usb-device           = { version = "0.3.1", optional = true }
@@ -52,7 +48,7 @@ embassy-sync       = { version = "0.5.0", optional = true }
 embassy-time       = { version = "0.2.0", optional = true }
 
 # RISC-V
-esp-riscv-rt = { version = "0.5.0", optional = true, path = "../esp-riscv-rt" }
+esp-riscv-rt = { version = "0.6.0", optional = true, path = "../esp-riscv-rt" }
 
 # Xtensa
 xtensa-lx    = { version = "0.8.0",  optional = true }
@@ -67,7 +63,7 @@ ufmt-write = { version = "0.1.0", optional = true }
 esp32   = { version = "0.28.0", features = ["critical-section"], optional = true }
 esp32c2 = { version = "0.16.0", features = ["critical-section"], optional = true }
 esp32c3 = { version = "0.19.0", features = ["critical-section"], optional = true }
-esp32c6 = { version = "0.10.0",  features = ["critical-section"], optional = true }
+esp32c6 = { version = "0.10.0", features = ["critical-section"], optional = true }
 esp32h2 = { version = "0.6.0",  features = ["critical-section"], optional = true }
 esp32s2 = { version = "0.19.0", features = ["critical-section"], optional = true }
 esp32s3 = { version = "0.23.0", features = ["critical-section"], optional = true }
@@ -89,7 +85,7 @@ esp32s3 = ["xtensa", "esp32s3/rt", "procmacros/esp32s3", "xtensa-lx/esp32s3", "x
 xtal-26mhz = []
 xtal-40mhz = []
 
-# Only certain chips support flip-link
+# Only certain chips support flip-link (ESP32-C6 and ESPS32-H2)
 flip-link = ["esp-riscv-rt/fix-sp"]
 
 # PSRAM support
@@ -98,9 +94,9 @@ psram-4m = []
 psram-8m = []
 
 # Octal RAM support
-opsram-2m = []
-opsram-4m = []
-opsram-8m = []
+opsram-2m  = []
+opsram-4m  = []
+opsram-8m  = []
 opsram-16m = []
 
 # USB OTG support (ESP32-S2 and ESP32-S3 only! Enabled by default)
@@ -145,7 +141,7 @@ embassy-executor-thread    = ["embassy", "embassy-executor"]
 embassy-time-systick = []
 embassy-time-timg0   = []
 
-# prefer integrated timers, but allow using the generic queue if needed
+# Prefer integrated timers, but allow using the generic queue if needed
 embassy-integrated-timers = ["embassy-executor?/integrated-timers"]
 embassy-generic-queue-8   = ["embassy-time/generic-queue-8"]
 embassy-generic-queue-16  = ["embassy-time/generic-queue-16"]

esp-hal-procmacros/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name         = "esp-hal-procmacros"
-version      = "0.7.0"
+version      = "0.8.0"
 edition      = "2021"
 rust-version = "1.67.0"
 description  = "Procedural macros for ESP-HAL"
@@ -17,11 +17,11 @@ proc-macro = true
 darling          = "0.20.3"
 litrs            = "0.4.1"
 object           = { version = "0.32.1", optional = true }
-proc-macro-crate = "2.0.0"
+proc-macro-crate = "2.0.1"
 proc-macro-error = "1.0.4"
-proc-macro2      = "1.0.69"
+proc-macro2      = "1.0.70"
 quote            = "1.0.33"
-syn              = { version = "2.0.38", features = ["extra-traits", "full"] }
+syn              = { version = "2.0.40", features = ["extra-traits", "full"] }
 
 [features]
 # Select a target device:

esp-hal-smartled/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name         = "esp-hal-smartled"
-version      = "0.6.0"
+version      = "0.7.0"
 edition      = "2021"
 rust-version = "1.67.0"
 description  = "RMT adapter for smartleds"
@@ -12,7 +12,7 @@ features = ["esp32c3"]
 
 [dependencies]
 defmt            = { version = "=0.3.5", optional = true }
-esp-hal-common   = { version = "0.13.0", path = "../esp-hal-common" }
+esp-hal-common   = { version = "0.14.0", path = "../esp-hal-common" }
 fugit            = "0.3.7"
 smart-leds-trait = "0.2.1"
 

esp-riscv-rt/CHANGELOG.md

@@ -5,18 +5,17 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-## Unreleased
-
-### Added
-
-### Changed
+## 0.6.0 - 2023-12-12
 
 ### Fixed
-- Fix overwriting rtc-uninit-data when there is no rtc-bss data (#952)
+
+- Fix overwriting `rtc-uninit-data` when there is no rtc-bss data (#952)
+- Fix RISC-V stack allocation (#988)
+- ESP32-C6/ESP32-H2: Add `fix-sp` feature to support `flip-link` in `esp-hal-common` (#1008)
 
 ### Removed
 
-## 0.5.0
+## 0.5.0 - 2023-09-05
 
 ### Changed
 

esp-riscv-rt/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name         = "esp-riscv-rt"
-version      = "0.5.0"
+version      = "0.6.0"
 edition      = "2021"
 rust-version = "1.65"
 description  = "Minimal runtime / startup for RISC-V CPUs from Espressif"
@@ -13,31 +13,28 @@ categories   = ["embedded", "no-std"]
 riscv           = "0.10.1"
 riscv-rt-macros = "0.2.0"
 
-[dev-dependencies]
-panic-halt = "0.2.0"
-
 [features]
-direct-vectoring = []
+direct-vectoring     = []
+fix-sp               = []
+has-mie-mip          = []
+init-data            = []
+init-rtc-fast-data   = []
+init-rtc-fast-text   = []
+init-rw-text         = []
 interrupt-preemption = []
-has-mie-mip = []
-zero-bss = []
-zero-rtc-fast-bss = []
-init-data = []
-init-rw-text = []
-init-rtc-fast-data = []
-init-rtc-fast-text = []
-fix-sp = []
+zero-bss             = []
+zero-rtc-fast-bss    = []
 
 # This feature is intended for testing; you probably don't want to enable it:
 ci = [
     "direct-vectoring",
-    "interrupt-preemption",
+    "fix-sp",
     "has-mie-mip",
-    "zero-bss",
-    "zero-rtc-fast-bss",
     "init-data",
-    "init-rw-text",
     "init-rtc-fast-data",
     "init-rtc-fast-text",
-    "fix-sp",
+    "init-rw-text",
+    "interrupt-preemption",
+    "zero-bss",
+    "zero-rtc-fast-bss",
 ]

esp32-hal/Cargo.toml

@@ -1,10 +1,6 @@
 [package]
-name    = "esp32-hal"
-version = "0.16.0"
-authors = [
-    "Jesse Braham <jesse@beta7.io>",
-    "Björn Quentin <bjoern.quentin@mobile-j.de>",
-]
+name         = "esp32-hal"
+version      = "0.17.0"
 edition      = "2021"
 rust-version = "1.67.0"
 description  = "HAL for ESP32 microcontrollers"
@@ -25,25 +21,25 @@ categories = [
 ]
 
 [dependencies]
-esp-hal-common = { version = "0.13.0", features = ["esp32"], path = "../esp-hal-common" }
+esp-hal-common = { version = "0.14.0", features = ["esp32"], path = "../esp-hal-common" }
 embassy-time   = { version = "0.2.0",  optional = true }
 
 [dev-dependencies]
 aes                = "0.8.3"
 critical-section   = "1.1.2"
-crypto-bigint      = { version = "0.5.3", default-features = false }
+crypto-bigint      = { version = "0.5.5", default-features = false }
 embassy-executor   = { version = "0.4.0", features = ["nightly"] }
 embassy-sync       = "0.5.0"
 embedded-graphics  = "0.8.1"
 embedded-hal-1     = { version = "=1.0.0-rc.2", package = "embedded-hal" }
 embedded-hal-async = "=1.0.0-rc.2"
-embedded-io-async  = "0.6.0"
+embedded-io-async  = "0.6.1"
 embedded-hal-bus   = "0.1.0-rc.2"
 esp-alloc          = "0.3.0"
 esp-backtrace      = { version = "0.9.0", features = ["esp32", "panic-handler", "exception-handler", "print-uart"] }
-esp-hal-smartled   = { version = "0.6.0", features = ["esp32"], path = "../esp-hal-smartled" }
-esp-println        = { version = "0.7.0", features = ["esp32"] }
-heapless           = "0.8"
+esp-hal-smartled   = { version = "0.7.0", features = ["esp32"], path = "../esp-hal-smartled" }
+esp-println        = { version = "0.7.1", features = ["esp32"] }
+heapless           = "0.8.0"
 lis3dh-async       = "0.8.0"
 sha2               = { version = "0.10.8", default-features = false}
 smart-leds         = "0.3.0"

esp32c2-hal/Cargo.toml

@@ -1,10 +1,6 @@
 [package]
-name    = "esp32c2-hal"
-version = "0.11.0"
-authors = [
-    "Jesse Braham <jesse@beta7.io>",
-    "Björn Quentin <bjoern.quentin@mobile-j.de>",
-]
+name         = "esp32c2-hal"
+version      = "0.12.0"
 edition      = "2021"
 rust-version = "1.67.0"
 description  = "HAL for ESP32-C2 microcontrollers"
@@ -25,30 +21,30 @@ categories = [
 ]
 
 [dependencies]
-esp-hal-common = { version = "0.13.0", features = ["esp32c2"], path = "../esp-hal-common" }
-embassy-time   = { version = "0.2.0", optional = true }
+esp-hal-common = { version = "0.14.0", features = ["esp32c2"], path = "../esp-hal-common" }
+embassy-time   = { version = "0.2.0",  optional = true }
 
 [dev-dependencies]
 critical-section   = "1.1.2"
-embassy-executor   = { version = "0.4.0", features = ["nightly"] }
+crypto-bigint      = { version = "0.5.5",  default-features = false }
+elliptic-curve     = { version = "0.13.8", default-features = false, features = ["sec1"] }
+embassy-executor   = { version = "0.4.0",  features = ["nightly"] }
+embassy-sync       = "0.5.0"
 embedded-graphics  = "0.8.1"
 embedded-hal-1     = { version = "=1.0.0-rc.2", package = "embedded-hal" }
 embedded-hal-async = "=1.0.0-rc.2"
-embedded-io-async  = "0.6.0"
+embedded-io-async  = "0.6.1"
 embedded-hal-bus   = "0.1.0-rc.2"
 esp-backtrace      = { version = "0.9.0", features = ["esp32c2", "panic-handler", "exception-handler", "print-uart"] }
-esp-println        = { version = "0.7.0", features = ["esp32c2"] }
-heapless           = "0.8"
+esp-println        = { version = "0.7.1", features = ["esp32c2"] }
+heapless           = "0.8.0"
+hex-literal        = "0.4.1"
 lis3dh-async       = "0.8.0"
+p192               = { version = "0.13.0", default-features = false, features = ["arithmetic"] }
+p256               = { version = "0.13.2", default-features = false, features = ["arithmetic"] }
 sha2               = { version = "0.10.8", default-features = false}
 ssd1306            = "0.8.4"
 static_cell        = { version = "2.0.0", features = ["nightly"] }
-hex-literal        = "0.4.1"
-crypto-bigint      = { version = "0.5.3", default-features = false }
-elliptic-curve     = { version = "0.13.6", default-features = false, features = ["sec1"] }
-p192               = { version = "0.13.0", default-features = false, features = ["arithmetic"] }
-p256               = { version = "0.13.2", default-features = false, features = ["arithmetic"] }
-embassy-sync       = "0.5.0"
 
 [features]
 default              = ["rt", "vectored", "xtal-40mhz", "embassy-integrated-timers"]