HIL SHA tests

[SergioGasquez]

Thank you for your contribution!

We appreciate the time and effort you've put into this pull request.
To help us review it efficiently, please ensure you've gone through the following checklist:

Submission Checklist 📝

• I have updated existing examples or added new ones (if applicable).
• My changes were added to the CHANGELOG.md in the proper section.

Extra:

• I have read the CONTRIBUTING.md guide and followed its instructions.

Pull Request Details 📖

Description

Adds an HIL test for SHA

Testing

Tested locally on S3 (required to use some changes of #1412), C6 and H2.

ESP32-S3 Output

     Running tests/sha.rs (target/xtensa-esp32s3-none-elf/debug/deps/sha-b2f1d22ba5d76ad5)
      Erasing ✔ [00:00:00] [##################################################################] 192.00 KiB/192.00 KiB @ 326.24 KiB/s (eta 0s )
  Programming ✔ [00:00:00] [#####################################################################] 48.76 KiB/48.76 KiB @ 49.45 KiB/s (eta 0s )    Finished in 1.597s

running 7 tests
test tests::test_sha_1       ... ok
test tests::test_sha_224     ... ok
test tests::test_sha_256     ... ok
test tests::test_sha_384     ... ok
test tests::test_sha_512     ... ok
test tests::test_sha_512_224 ... ok
test tests::test_sha_512_256 ... ok

test result: ok. 7 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 3.30s

ESP32-C6 Output

     Running tests/sha.rs (target/riscv32imac-unknown-none-elf/debug/deps/sha-0ef72a0ebd885bd2)
      Erasing ✔ [00:00:00] [##################################################################] 192.00 KiB/192.00 KiB @ 629.50 KiB/s (eta 0s )
  Programming ✔ [00:00:00] [#####################################################################] 49.67 KiB/49.67 KiB @ 73.82 KiB/s (eta 0s )    Finished in 0.994s

running 3 tests
test tests::test_sha_1   ... ok
test tests::test_sha_224 ... ok
test tests::test_sha_256 ... ok

test result: ok. 3 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 1.48s

ESP32-H2 Output

     Running tests/sha.rs (target/riscv32imac-unknown-none-elf/debug/deps/sha-c0acbc88e4804f4a)
      Erasing ✔ [00:00:00] [##################################################################################] 192.00 KiB/192.00 KiB @ 1002.40 KiB/s (eta 0s )
  Programming ✔ [00:00:00] [######################################################################################] 45.16 KiB/45.16 KiB @ 65.61 KiB/s (eta 0s )    Finished in 0.896s

running 3 tests
test tests::test_sha_1   ... ERROR probe_rs::util::rtt: 
Error reading from RTT: The control block has been corrupted. write pointer is 560705263 while buffer size is 1024 for "up" channel 0 (defmt)
ok
test tests::test_sha_224 ... ERROR probe_rs::util::rtt: 
Error reading from RTT: The control block has been corrupted. write pointer is 1577470528 while buffer size is 1024 for "up" channel 0 (defmt)
ok
test tests::test_sha_256 ... ERROR probe_rs::util::rtt: 
Error reading from RTT: The control block has been corrupted. write pointer is 610487893 while buffer size is 1024 for "up" channel 0 (defmt)
ok

test result: ok. 3 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 1.45s

Manually triggered the HIL workflow: https://github.com/esp-rs/esp-hal/actions/runs/8644022372

[JurajSadel]

LGTM, thanks!

[jessebraham]

Thanks!