Replies: 1 comment
-
Hello,
#ifndef ETH_PHY_ADDR
#define ETH_PHY_ADDR 0
#endif
#ifndef ETH_PHY_TYPE
#define ETH_PHY_TYPE ETH_PHY_LAN8720
#endif
#ifndef ETH_PHY_POWER
#define ETH_PHY_POWER -1
#endif
#ifndef ETH_PHY_MDC
#define ETH_PHY_MDC 23
#endif
#ifndef ETH_PHY_MDIO
#define ETH_PHY_MDIO 18
#endif
https://github.com/espressif/arduino-esp32/blob/f1b06d2a74acdef190ac16e83d48ab619f557e73/libraries/Ethernet/src/ETH.h
Em sex., 20 de jan. de 2023 às 12:22, martinmmi ***@***.***>
escreveu:
… Hello, i am Martin from Germany and i have one basic question to this part
of the repository:
https://github.com/espressif/arduino-esp32/blob/f1b06d2a74acdef190ac16e83d48ab619f557e73/libraries/Ethernet/examples/ETH_LAN8720/ETH_LAN8720.ino
Since few weeks I try to connect an *LAN8720* to an *LILYOGO ESP32*. Its
not so easy because the LAN8720 Board needs much external signals from the
esp.
*For Example:*
- MDC / MDIO (I²C Bus)
- CRS
- RX1
- RX0
- nINT (CLOCK)
- etc.
*Now my question:* Where can i do the pin assignments in the
[WebServer_WT32_ETH01] Lib? Because every pinout is different on
microcontrollers. Maybe for the example: AdvancedWebServer.ino
I have that controller concrete:
http://www.lilygo.cn/prod_view.aspx?TypeId=50003&Id=1271&FId=t3:50003:3
Thank you so much for reply in advance. I'll show my appreciation if this
works.
—
Reply to this email directly, view it on GitHub
<#7739>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/A5FRGW725EOZKH76S4MD23DWTKURTANCNFSM6AAAAAAUBUS5JI>
.
You are receiving this because you are subscribed to this thread.Message
ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
0 replies
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Uh oh!
There was an error while loading. Please reload this page.
-
Hello, i am Martin from Germany and i have one basic question to this part of the repository:
https://github.com/espressif/arduino-esp32/blob/f1b06d2a74acdef190ac16e83d48ab619f557e73/libraries/Ethernet/examples/ETH_LAN8720/ETH_LAN8720.ino
Since few weeks I try to connect an LAN8720 to an LILYOGO ESP32. Its not so easy because the LAN8720 Board needs much external signals from the esp.
For Example:
Now my question: Where can i do the pin assignments in the [WebServer_WT32_ETH01] Lib? Because every pinout is different on microcontrollers. Maybe for the example: AdvancedWebServer.ino
I have that controller concrete:
http://www.lilygo.cn/prod_view.aspx?TypeId=50003&Id=1271&FId=t3:50003:3
Thank you so much for reply in advance. I'll show my appreciation if this works.
Beta Was this translation helpful? Give feedback.
All reactions