Cannot connect to WiFi on ESP32-S3-DevKitC-1 #7424
Description
Board
ESP32-S3-DevKitC-1
Device Description
Just the dev board ESP32-S3-DevKitC-1 and nothing else.
Hardware Configuration
No
Version
v2.0.5
IDE Name
Arduino IDE
Operating System
macOS 12.6.1
Flash frequency
80MHz
PSRAM enabled
no
Upload speed
921600
Description
Cannot connect to WiFi SSID
Sketch
#include <WiFi.h>
char ssid[] = "WIFI_SSID";
char pass[] = "WIFI_PASSWORD";
void setup() {
Serial.begin(115200);
while (!Serial) { }
Serial.print("Attempting to connect to SSID: ");
Serial.println(ssid);
WiFi.useStaticBuffers(true);
WiFi.mode(WIFI_STA);
WiFi.begin(ssid, pass);
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.println("Connected to WiFi");
printWifiStatus();
}
void loop() {}
void printWifiStatus() {
Serial.print("SSID: ");
Serial.println(WiFi.SSID());
IPAddress ip = WiFi.localIP();
Serial.print("IP Address: ");
Serial.println(ip);
long rssi = WiFi.RSSI();
Serial.print("signal strength (RSSI):");
Serial.print(rssi);
Serial.println(" dBm");
}Debug Message
Attempting to connect to SSID: WIFI_SSID_NAME
[ 4216][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 0 - WIFI_READY
[ 4249][V][WiFiGeneric.cpp:338] _arduino_event_cb(): STA Started
[ 4251][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 2 - STA_START
[ 4250][V][WiFiGeneric.cpp:97] set_esp_interface_ip(): Configuring Station static IP: 0.0.0.0, MASK: 0.0.0.0, GW: 0.0.0.0
....[ 6674][V][WiFiGeneric.cpp:360] _arduino_event_cb(): STA Disconnected: SSID: WIFI_SSID_NAME, BSSID: 00:00:00:00:00:00, Reason: 201
[ 6674][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 5 - STA_DISCONNECTED
[ 6682][W][WiFiGeneric.cpp:950] _eventCallback(): Reason: 201 - NO_AP_FOUND
[ 6689][D][WiFiGeneric.cpp:966] _eventCallback(): WiFi Reconnect Running
[ 6697][V][WiFiGeneric.cpp:97] set_esp_interface_ip(): Configuring Station static IP: 0.0.0.0, MASK: 0.0.0.0, GW: 0.0.0.0
.....[ 9114][V][WiFiGeneric.cpp:360] _arduino_event_cb(): STA Disconnected: SSID: WIFI_SSID_NAME, BSSID: 00:00:00:00:00:00, Reason: 201
[ 9114][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 5 - STA_DISCONNECTED
[ 9122][W][WiFiGeneric.cpp:950] _eventCallback(): Reason: 201 - NO_AP_FOUND
[ 9129][D][WiFiGeneric.cpp:975] _eventCallback(): WiFi AutoReconnect Running
[ 9137][V][WiFiGeneric.cpp:97] set_esp_interface_ip(): Configuring Station static IP: 0.0.0.0, MASK: 0.0.0.0, GW: 0.0.0.0
.....[ 11557][V][WiFiGeneric.cpp:360] _arduino_event_cb(): STA Disconnected: SSID: WIFI_SSID_NAME, BSSID: 00:00:00:00:00:00, Reason: 201
[ 11557][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 5 - STA_DISCONNECTED
[ 11565][W][WiFiGeneric.cpp:950] _eventCallback(): Reason: 201 - NO_AP_FOUND
Other Steps to Reproduce
I have successfully connected to the same WiFi network with Tasmota as suggested in #6430 (although it's for ESP32-C3). WiFiScan example code is also successful and it shows all the WiFi networks nearby!
I have also added WiFi.useStaticBuffers(true); and WiFi.mode(WIFI_STA); before WiFi.begin(ssid, pass); as suggested in the issue #6430.
WiFi SSID details:
I have checked existing issues, online documentation and the Troubleshooting Guide
- I confirm I have checked existing issues, online documentation and Troubleshooting guide.