[eppp]: Add support for SDIO transport

components/eppp_link/CMakeLists.txt

@@ -1,3 +1,3 @@
-idf_component_register(SRCS "eppp_link.c"
+idf_component_register(SRCS eppp_link.c eppp_sdio_slave.c eppp_sdio_host.c
                     INCLUDE_DIRS "include"
                     PRIV_REQUIRES esp_netif esp_driver_spi esp_driver_gpio esp_timer driver)

components/eppp_link/Kconfig

@@ -21,6 +21,13 @@ menu "eppp_link"
             bool "SPI"
             help
                 Use SPI.
+
+        config EPPP_LINK_DEVICE_SDIO
+            bool "SDIO"
+            depends on SOC_SDMMC_HOST_SUPPORTED || SOC_SDIO_SLAVE_SUPPORTED
+            help
+                Use SDIO.
+
     endchoice
 
     config EPPP_LINK_CONN_MAX_RETRY
@@ -34,8 +41,30 @@ menu "eppp_link"
     config EPPP_LINK_PACKET_QUEUE_SIZE
         int "Packet queue size"
         default 64
+        depends on EPPP_LINK_DEVICE_SPI
         help
             Size of the Tx packet queue.
             You can decrease the number for slower bit rates.
 
+    choice EPPP_LINK_SDIO_ROLE
+        prompt "Choose SDIO host or slave"
+        depends on EPPP_LINK_DEVICE_SDIO
+        default EPPP_LINK_DEVICE_SDIO_HOST if SOC_SDMMC_HOST_SUPPORTED
+        help
+            Select which either SDIO host or slave
+
+        config EPPP_LINK_DEVICE_SDIO_HOST
+            bool "Host"
+            depends on SOC_SDMMC_HOST_SUPPORTED
+            help
+                Use SDIO host.
+
+        config EPPP_LINK_DEVICE_SDIO_SLAVE
+            bool "SLAVE"
+            depends on SOC_SDIO_SLAVE_SUPPORTED
+            help
+                Use SDIO slave.
+
+    endchoice
+
 endmenu

components/eppp_link/README.md

@@ -14,7 +14,7 @@ brings in the WiFi connectivity from the "SLAVE" microcontroller.
              SLAVE micro                                  HOST micro
     \|/  +----------------+                           +----------------+
      |   |                |          serial line      |                |
-     +---+ WiFi NAT PPPoS |======== UART / SPI =======| PPPoS client   |
+     +---+ WiFi NAT PPPoS |=== UART / SPI / SDIO =====| PPPoS client   |
          |        (server)|                           |                |
          +----------------+                           +----------------+
 ```
@@ -39,14 +39,19 @@ brings in the WiFi connectivity from the "SLAVE" microcontroller.
 
 ## Throughput
 
-Tested with WiFi-NAPT example, no IRAM optimizations
+Tested with WiFi-NAPT example
 
 ### UART @ 3Mbauds
 
 * TCP - 2Mbits/s
 * UDP - 2Mbits/s
 
-### SPI @ 20MHz
+### SPI @ 16MHz
 
-* TCP - 6Mbits/s
-* UDP - 10Mbits/s
+* TCP - 5Mbits/s
+* UDP - 8Mbits/s
+
+### SDIO
+
+* TCP - 9Mbits/s
+* UDP - 11Mbits/s

components/eppp_link/eppp_link.c

@@ -12,6 +12,7 @@
 #include "esp_event.h"
 #include "esp_netif_ppp.h"
 #include "eppp_link.h"
+#include "esp_serial_slave_link/essl_sdio.h"
 
 #if CONFIG_EPPP_LINK_DEVICE_SPI
 #include "driver/spi_master.h"
@@ -86,7 +87,18 @@ struct eppp_handle {
     bool netif_stop;
 };
 
-
+typedef esp_err_t (*transmit_t)(void *h, void *buffer, size_t len);
+
+#if CONFIG_EPPP_LINK_DEVICE_SDIO
+esp_err_t eppp_sdio_host_tx(void *h, void *buffer, size_t len);
+esp_err_t eppp_sdio_host_rx(esp_netif_t *netif);
+esp_err_t eppp_sdio_slave_rx(esp_netif_t *netif);
+esp_err_t eppp_sdio_slave_tx(void *h, void *buffer, size_t len);
+esp_err_t eppp_sdio_host_init(struct eppp_config_sdio_s *config);
+esp_err_t eppp_sdio_slave_init(void);
+void eppp_sdio_slave_deinit(void);
+void eppp_sdio_host_deinit(void);
+#else
 static esp_err_t transmit(void *h, void *buffer, size_t len)
 {
     struct eppp_handle *handle = h;
@@ -125,9 +137,10 @@ static esp_err_t transmit(void *h, void *buffer, size_t len)
 #elif CONFIG_EPPP_LINK_DEVICE_UART
     ESP_LOG_BUFFER_HEXDUMP("ppp_uart_send", buffer, len, ESP_LOG_VERBOSE);
     uart_write_bytes(handle->uart_port, buffer, len);
-#endif
+#endif // DEVICE UART or SPI
     return ESP_OK;
 }
+#endif
 
 static void netif_deinit(esp_netif_t *netif)
 {
@@ -209,7 +222,11 @@ static esp_netif_t *netif_init(eppp_type_t role, eppp_config_t *eppp_config)
 
     esp_netif_driver_ifconfig_t driver_cfg = {
         .handle = h,
+#if CONFIG_EPPP_LINK_DEVICE_SDIO
+        .transmit = role == EPPP_CLIENT ? eppp_sdio_host_tx : eppp_sdio_slave_tx,
+#else
         .transmit = transmit,
+#endif
     };
     const esp_netif_driver_ifconfig_t *ppp_driver_cfg = &driver_cfg;
 
@@ -657,6 +674,20 @@ esp_err_t eppp_perform(esp_netif_t *netif)
     }
     return ESP_OK;
 }
+#elif CONFIG_EPPP_LINK_DEVICE_SDIO
+
+esp_err_t eppp_perform(esp_netif_t *netif)
+{
+    struct eppp_handle *h = esp_netif_get_io_driver(netif);
+    if (h->stop) {
+        return ESP_ERR_TIMEOUT;
+    }
+    if (h->role == EPPP_SERVER) {
+        return eppp_sdio_slave_rx(netif);
+    } else {
+        return eppp_sdio_host_rx(netif);
+    }
+}
 
 #endif // CONFIG_EPPP_LINK_DEVICE_SPI / UART
 
@@ -700,6 +731,13 @@ void eppp_deinit(esp_netif_t *netif)
     }
 #elif CONFIG_EPPP_LINK_DEVICE_UART
     deinit_uart(esp_netif_get_io_driver(netif));
+#elif CONFIG_EPPP_LINK_DEVICE_SDIO
+    struct eppp_handle *h = esp_netif_get_io_driver(netif);
+    if (h->role == EPPP_CLIENT) {
+        eppp_sdio_host_deinit();
+    } else {
+        eppp_sdio_slave_deinit();
+    }
 #endif
     netif_deinit(netif);
 }
@@ -714,7 +752,6 @@ esp_netif_t *eppp_init(eppp_type_t role, eppp_config_t *config)
     esp_netif_t *netif = netif_init(role, config);
     if (!netif) {
         ESP_LOGE(TAG, "Failed to initialize PPP netif");
-        remove_handlers();
         return NULL;
     }
     esp_netif_ppp_config_t netif_params;
@@ -732,6 +769,18 @@ esp_netif_t *eppp_init(eppp_type_t role, eppp_config_t *config)
     }
 #elif CONFIG_EPPP_LINK_DEVICE_UART
     init_uart(esp_netif_get_io_driver(netif), config);
+#elif CONFIG_EPPP_LINK_DEVICE_SDIO
+    esp_err_t ret;
+    if (role == EPPP_SERVER) {
+        ret = eppp_sdio_slave_init();
+    } else {
+        ret = eppp_sdio_host_init(&config->sdio);
+    }
+
+    if (ret != ESP_OK) {
+        ESP_LOGE(TAG, "Failed to initialize SDIO %d", ret);
+        return NULL;
+    }
 #endif
     return netif;
 }
@@ -754,6 +803,12 @@ esp_netif_t *eppp_open(eppp_type_t role, eppp_config_t *config, int connect_time
         return NULL;
     }
 #endif
+#if CONFIG_EPPP_LINK_DEVICE_SDIO
+    if (config->transport != EPPP_TRANSPORT_SDIO) {
+        ESP_LOGE(TAG, "Invalid transport: SDIO device must be enabled in Kconfig");
+        return NULL;
+    }
+#endif
 
     if (config->task.run_task == false) {
         ESP_LOGE(TAG, "task.run_task == false is invalid in this API. Please use eppp_init()");

components/eppp_link/eppp_sdio.h

@@ -0,0 +1,19 @@
+/*
+ * SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+#pragma once
+
+#define MAX_SDIO_PAYLOAD 1500
+#define SDIO_ALIGN(size) (((size) + 3U) & ~(3U))
+#define SDIO_PAYLOAD SDIO_ALIGN(MAX_SDIO_PAYLOAD)
+#define PPP_SOF 0x7E
+
+// Interrupts and registers
+#define SLAVE_INTR      0
+#define SLAVE_REG_REQ   0
+
+// Requests from host to slave
+#define REQ_RESET 1
+#define REQ_INIT  2