fufarm_hydro

Code for the Hydroponics Control system within Home Assistant

Install Adafruit Blinka https://learn.adafruit.com/circuitpython-on-raspberrypi-linux/installing-circuitpython-on-raspberry-pi

Enable i2c

sudo raspi-config nonint do_i2c 0

Install required system-wide packages

sudo apt-get install -y i2c-tools libgpiod-dev python3-libgpiod

Set up the virtual python environment a(nd install all the requried packages if necessary)

#pip3 install rpi-lgpio #pip3 install --upgrade adafruit-blinka #pip3 install adafruit-circuitpython-motor

source ./venv_activate.sh