docs: Add documentation on how to use GDB

Add documentation on how to use gdb with firecracker with examples on
how to use the basic functionality to debug the guest kernel

Signed-off-by: Jack Thomson <jackabt@amazon.com>

docs/gdb-debugging.md

@@ -0,0 +1,93 @@
+# GDB Debugging with Firecracker
+
+Firecracker supports debugging the guest kernel via GDB remote serial protocol.
+This allows us to connect gdb to the firecracker process and step through debug
+the guest kernel.
+
+## Prerequiesites
+
+Firstly to enable GDB debugging we need to compile Firecracker with the `debug`
+feature enabled, this will enable the necessary components for the debugging
+process.
+
+To build firecracker with the `debug` feature enabled we run:
+
+```bash
+cargo build --features "debug"
+```
+
+Secondly we need to compile a kernel with specific features enabled for
+debugging to work, the key features to enable on the kernel are:
+
+```
+CONFIG_FRAME_POINTER=y
+CONFIG_KGDB=y
+CONFIG_KGDB_SERIAL_CONSOLE=y
+CONFIG_DEBUG_INFO
+```
+
+It can also be worth disabling the multi core scheduler as this can cause issues
+with GDB these are set under these configs and can be disabled if you encounter
+issues
+
+```
+CONFIG_SCHED_MC=y
+CONFIG_SCHED_MC_PRIO=y
+```
+
+## Starting Firecracker with GDB
+
+With all the prerequiesites in place you can now start firecracker ready to
+connect to GDB. When you start the firecracker binary now you'll notice it'll be
+blocked waiting for the GDB connection this is done to allow us to set
+breakpoints before the boot process begins.
+
+With Firecracker running and waiting for GDB we are now able to start GDB and
+connect to Firecracker. You may need to set the permissions of `/tmp/gdb.socket`
+to `777` before connecting.
+
+An example of the steps taken to start GDB, load the symbols and connect to
+Firecracker.
+
+1. Start the GDB process, you can attach the symbols by appending the kernel
+   blob for example here `vmlinux`
+
+   ```bash
+   gdb vmlinux
+   ```
+
+1. When GDB has started set the target remote to `/tmp/gdb.socket` to connect to
+   Firecracker
+
+   ```bash
+   (gdb) target remote /tmp/gdb.socket
+   ```
+
+With these steps completed you'll now see GDB has stopped at the entry point
+ready for us to start inserting breakpoints and debugging.
+
+## Notes
+
+### Software Breakpoints not working on start
+
+When at the initial paused state you'll notice software breakpoints won't work
+and only hardware breakpoints will until pages are setup. To circumvent this one
+solution is to set a hardware breakpoint at start_kernel and continue. Once
+you've hit the start_kernel set the regular breakpoints as you would do
+normally. E.G.
+
+```bash
+> hbreak start_kernel
+> c
+```
+
+### Pausing Firecracker while it's running
+
+While Firecracker is running you can pause vcpu 1 by pressing `Ctrl+C` which
+will stop the VCPU and allow you to set breakpoints or inspect the current
+location
+
+### Halting execution of GDB and Firecracker
+
+To end the debugging session and shutdown Firecracker you can run the `exit`
+command in the GDB session which will terminate both