Displaylib

A test program + library to drive the Adafruit 1.54" eInk Display (Color Version) on the stm32f103 microcontroller.

Pinout

This project uses the following pinout.

PA15..0:

Display pins

• PA0: ECS
• PA1: D/C
• PA2: (DEAD ON NUCLEO BOARD)SRCS
• PA3: SDCS

SPI

• PA4: SPI1_NSS
• PA5: SPI1_SCK
• PA6: SPI1_MISO
• PA7: SPI1_MOSI

Display pins

• PA8: RST

UART

• PA9: TX
• PA10: RX

Display pins

• PA11: BUSY

• PA12: new SRCS

• PA13...15: Reserved

Building

I used a custom build system (see CMakeLists.txt) because I could not find any easier way at the time. This includes a custom reset_handler and some CMSIS files which are not included in this project.

Therefore, the best way to get this working is to just copy the source files into an existing project from the IDE of your liking.