Issue #631: Add Pinedrive 2242 NVMe SSD to site.

_cards_m2/pinedrive-2242-nvme-ssd.md

@@ -0,0 +1,29 @@
+---
+layout: card
+title: "Pinedrive NVMe SSD 256GB (2242)"
+picture: "/images/m2-pinedrive-2242-nvme-ssd.jpeg"
+functionality_cm4: "Full"
+functionality_pi5: "Full"
+driver_required: "No"
+github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/631"
+buy_link: https://pineboards.io/products/pinedrive-nvme-ssd-256gb-2242
+videos: []
+---
+The [Pinedrive NVMe SSD 256GB (2242)](https://pineboards.io/products/pinedrive-nvme-ssd-256gb-2242) costs €45,99 EUR (about $50 USD as of this writing), and is verified to work with the Raspberry Pi 5 (and earlier generations).
+
+It's a white-labeled 3D TLC NAND SSD running at PCIe Gen 3 x4, and on a faster computer, should get up to 2.2 GB/sec reads and 1.3 GB/sec writes. On the Pi 5's single PCIe Gen 3 lane, it should get around 850 MB/sec.
+
+The drive has a 3 year warranty with a 1.5m hour MTBF and 200 TBW.
+
+## Benchmark Results
+
+Tested on 2024-05-13 on a Raspberry Pi 5 at PCIe Gen 3 speeds:
+
+| Benchmark                  | Result |
+| -------------------------- | ------ |
+| iozone 4K random read      | 61.08 MB/s |
+| iozone 4K random write     | 267.79 MB/s |
+| iozone 1M random read      | 812.33 MB/s |
+| iozone 1M random write     | 746.80 MB/s |
+| iozone 1M sequential read  | 812.76 MB/s |
+| iozone 1M sequential write | 727.14 MB/s |