NetBox

NetBox is an IP address management (IPAM) and data center infrastructure management (DCIM) tool.

TL;DR

$ helm repo add bootc https://charts.boo.tc
$ helm install netbox \
  --set postgresql.postgresqlPostgresPassword=[password1] \
  --set postgresql.postgresqlPassword=[password2] \
  --set redis.auth.password=[password3] \
  bootc/netbox

Prerequisites

This chart has only been tested on Kubernetes 1.18+, but should work on 1.14+
This chart works with NetBox 3.0.0+ (3.0.11+ recommended)
Recent versions of Helm 3 are supported

Installing the Chart

To install the chart with the release name my-release and default configuration:

$ helm repo add bootc https://charts.boo.tc
$ helm install my-release \
  --set postgresql.postgresqlPostgresPassword=[password1] \
  --set postgresql.postgresqlPassword=[password2] \
  --set redis.auth.password=[password3] \
  bootc/netbox

The default configuration includes the required PostgreSQL and Redis database services, but either or both may be managed externally if required.

Production Usage

Always use an existing Secret and supply all passwords and secret keys yourself to avoid Helm re-generating any of them for you.

I strongly recommend setting both postgresql.enabled and redis.enabled to false and using a separate external PostgreSQL and Redis instance. This de-couples those services from the chart's bundled versions which may have complex upgrade requirements. I also recommend using a clustered PostgreSQL server (e.g. using Zalando's Postgres Operator) and Redis with Sentinel (e.g. using Aaron Layfield's redis-ha chart).

Set persistence.enabled to false and use the S3 storageBackend for object storage. This works well with Minio or Ceph RGW as well as Amazon S3.

Run multiple replicas of the NetBox web front-end to avoid interruptions during upgrades or at other times when the pods need to be restarted. There's no need to have multiple workers (worker.replicaCount) for better availability. Set up affinity.podAntiAffinity to avoid multiple NetBox pods being colocated on the same node, for example:

affinity:
  podAntiAffinity:
    requiredDuringSchedulingIgnoredDuringExecution:
      - labelSelector:
          matchLabels:
            app.kubernetes.io/instance: netbox
            app.kubernetes.io/name: netbox
            app.kubernetes.io/component: netbox
        topologyKey: kubernetes.io/hostname

Uninstalling the Chart

To delete the chart:

$ helm delete my-release

Upgrading

Bundled PostgreSQL

When upgrading or changing settings and using the bundled Bitnami PostgreSQL sub-chart, you must provide the postgresql.postgresqlPassword at minimum. Ideally you should also supply the postgresql.postgresqlPostgresPassword and, if using replication, the postgresql.replication.password. Please see the upstream documentation for further information.

From 3.x to 4.x

NetBox 3.0.0 or above is required
The Bitnami Redis sub-chart was upgraded from 12.x to 15.x; please read the upstream upgrade notes if you are using the bundled Redis
The cacheTimeout and releaseCheck.timeout settings were removed

From 2.x to 3.x

NetBox 2.10.4 or above is required
Kubernetes 1.14 or above is required
Helm v3 or above is now required
The netbox Deployment selectors are changed, so the Deployment must be deleted on upgrades
The Bitnami PostgreSQL sub-chart was upgraded from 8.x to 10.x; please read the upstream upgrade notes if you are using the bundled PostgreSQL
The Bitnami Redis sub-chart was upgraded from 10.x to 12.x; please read the upstream upgrade notes if you are using the bundled Redis
The NGINX container is removed, on account of upstream's migration from Gunicorn to NGINX Unit
The webhooksRedis configuration key in values.yaml has been renamed to tasksRedis to match the upstream name
The redis_password key in the Secret has been renamed to redis_tasks_password

From 1.x to 2.x

If you use an external Redis you will need to update your configuration values due to the chart reflecting upstream changes in how it uses Redis. There are now separate Redis configuration blocks for webhooks and for caching, though they can both point at the same Redis instance as long as the database numbers are different.

From 0.x to 1.x

The chart dependencies on PostgreSQL and Redis have been upgraded, so you may need to take action depending on how you have configured the chart. The PostgreSQL chart was upgraded from 5.x.x to 7.x.x, and Redis from 8.x.x to 9.x.x.

Configuration

The following table lists the configurable parameters for this chart and their default values.

Parameter	Description	Default
`replicaCount`	The desired number of NetBox pods	`1`
`image.repository`	NetBox container image repository	`netboxcommunity/netbox`
`image.tag`	NetBox container image tag	`""`
`image.pullPolicy`	NetBox container image pull policy	`IfNotPresent`
`superuser.name`	Initial super-user account to create	`admin`
`superuser.email`	Email address for the initial super-user account	`admin@example.com`
`superuser.password`	Password for the initial super-user account	`admin`
`superuser.apiToken`	API token created for the initial super-user account	`0123456789abcdef0123456789abcdef01234567`
`skipStartupScripts`	Skip netbox-docker startup scripts	`true`
`allowedHosts`	List of valid FQDNs for this NetBox instance	`["*"]`
`admins`	List of admins to email about critical errors	`[]`
`authPasswordValidators`	Configure validation of local user account passwords	`[]`
`allowedUrlSchemes`	URL schemes that are allowed within links in NetBox	see `values.yaml`
`banner.top`	Banner text to display at the top of every page	`""`
`banner.bottom`	Banner text to display at the bottom of every page	`""`
`banner.login`	Banner text to display on the login page	`""`
`basePath`	Base URL path if accessing NetBox within a directory	`""`
`changelogRetention`	Maximum number of days to retain logged changes (0 = forever)	`90`
`customValidators`	Custom validators for NetBox field values	`{}`
`defaultUserPreferences`	Default preferences for newly created user accounts	`{}`
`cors.originAllowAll`	CORS: allow all origins	`false`
`cors.originWhitelist`	CORS: list of origins authorised to make cross-site HTTP requests	`[]`
`cors.originRegexWhitelist`	CORS: list of regex strings matching authorised origins	`[]`
`csrf.cookieName`	Name of the CSRF authentication cookie	`csrftoken`
`csrf.trustedOrigins`	A list of trusted origins for unsafe (e.g. POST) requests	`[]`
`debug`	Enable NetBox debugging (NOT for production use)	`false`
`dbWaitDebug`	Show details of errors that occur when applying migrations	`false`
`email.server`	SMTP server to use to send emails	`localhost`
`email.port`	TCP port to connect to the SMTP server on	`25`
`email.username`	Optional username for SMTP authentication	`""`
`email.password`	Password for SMTP authentication (see also `existingSecret`)	`""`
`email.useSSL`	Use SSL when connecting to the server	`false`
`email.useTLS`	Use TLS when connecting to the server	`false`
`email.sslCertFile`	SMTP SSL certificate file path (e.g. in a mounted volume)	`""`
`email.sslKeyFile`	SMTP SSL key file path (e.g. in a mounted volume)	`""`
`email.timeout`	Timeout for SMTP connections, in seconds	`10`
`email.from`	Sender address for emails sent by NetBox	`""`
`enforceGlobalUnique`	Enforce unique IP space in the global table (not in a VRF)	`false`
`exemptViewPermissions`	A list of models to exempt from the enforcement of view permissions	`[]`
`fieldChoices`	Configure custom choices for certain built-in fields	`{}`
`graphQlEnabled`	Enable the GraphQL API	`true`
`httpProxies`	HTTP proxies NetBox should use when sending outbound HTTP requests	`null`
`internalIPs`	IP addresses recognized as internal to the system	`['127.0.0.1', '::1']`
`jobResultRetention`	The number of days to retain job results (scripts and reports)	`90`
`logging`	Custom Django logging configuration	`{}`
`loginPersistence`	Enables users to remain authenticated to NetBox indefinitely	`false`
`loginRequired`	Permit only logged-in users to access NetBox	`false` (unauthenticated read-only access)
`loginTimeout`	How often to re-authenticate users	`1209600` (14 days)
`maintenanceMode`	Display a "maintenance mode" banner on every page	`false`
`mapsUrl`	The URL to use when mapping physical addresses or GPS coordinates	`https://maps.google.com/?q=`
`maxPageSize`	Maximum number of objects that can be returned by a single API call	`1000`
`storageBackend`	Django-storages backend class name	`null`
`storageConfig`	Django-storages backend configuration	`{}`
`metricsEnabled`	Expose Prometheus metrics at the `/metrics` HTTP endpoint	`false`
`napalm.username`	Username used by the NAPALM library to access network devices	`""`
`napalm.password`	Password used by the NAPALM library (see also `existingSecret`)	`""`
`napalm.timeout`	Timeout for NAPALM to connect to a device (in seconds)	`30`
`napalm.args`	A dictionary of optional arguments to pass to NAPALM	`{}`
`paginateCount`	The default number of objects to display per page in the web UI	`50`
`plugins`	Additional plugins to load into NetBox	`[]`
`pluginsConfig`	Configuration for the additional plugins	`{}`
`powerFeedDefaultAmperage`	Default amperage value for new power feeds	`15`
`powerFeedMaxUtilisation`	Default maximum utilisation percentage for new power feeds	`80`
`powerFeedDefaultVoltage`	Default voltage value for new power feeds	`120`
`preferIPv4`	Prefer devices' IPv4 address when determining their primary address	`false`
`rackElevationDefaultUnitHeight`	Rack elevation default height in pixels	`22`
`rackElevationDefaultUnitWidth`	Rack elevation default width in pixels	`220`
`remoteAuth.enabled`	Enable remote authentication support	`false`
`remoteAuth.backend`	Remote authentication backend class	`netbox.authentication.RemoteUserBackend`
`remoteAuth.header`	The name of the HTTP header which conveys the username	`HTTP_REMOTE_USER`
`remoteAuth.autoCreateUser`	Enables the automatic creation of new users	`true`
`remoteAuth.defaultGroups`	A list of groups to assign to newly created users	`[]`
`remoteAuth.defaultPermissions`	A list of permissions to assign newly created users	`{}`
`remoteAuth.groupSyncEnabled`	Sync remote user groups from an HTTP header set by a reverse proxy	`false`
`remoteAuth.groupHeader`	The name of the HTTP header which conveys the groups to which the user belongs	`HTTP_REMOTE_USER_GROUP`
`remoteAuth.superuserGroups`	The list of groups that promote an remote User to Superuser on login	`[]`
`remoteAuth.superusers`	The list of users that get promoted to Superuser on login	`[]`
`remoteAuth.staffGroups`	The list of groups that promote an remote User to Staff on login	`[]`
`remoteAuth.staffUsers`	The list of users that get promoted to Staff on login	`[]`
`remoteAuth.groupSeparator`	The Seperator upon which `remoteAuth.groupHeader` gets split into individual groups	`\|`
`remoteAuth.ldap.serverUri`	see django-auth-ldap	`""`
`remoteAuth.ldap.startTls`	if StarTLS should be used	see values.yaml
`remoteAuth.ldap.ignoreCertErrors`	if Certificate errors should be ignored	see values.yaml
`remoteAuth.ldap.bindDn`	Distinguished Name to bind with	`""`
`remoteAuth.ldap.bindPassword`	Password for bind DN	`""`
`remoteAuth.ldap.userDnTemplate`	see AUTH_LDAP_USER_DN_TEMPLATE	see values.yaml
`remoteAuth.ldap.userSearchBaseDn`	see base_dn of django_auth_ldap.config.LDAPSearch	see values.yaml
`remoteAuth.ldap.userSearchAttr`	User attribute name for user search	`sAMAccountName`
`remoteAuth.ldap.groupSearchBaseDn`	base DN for group search	see values.yaml
`remoteAuth.ldap.groupSearchClass`	django-auth-ldap for group search	`group`
`remoteAuth.ldap.groupType`	see AUTH_LDAP_GROUP_TYPE	`GroupOfNamesType`
`remoteAuth.ldap.requireGroupDn`	DN of a group that is required for login	`null`
`remoteAuth.ldap.findGroupPerms`	see AUTH_LDAP_FIND_GROUP_PERMS	true
`remoteAuth.ldap.mirrorGroups`	see AUTH_LDAP_MIRROR_GROUPS	`null`
`remoteAuth.ldap.cacheTimeout`	see AUTH_LDAP_MIRROR_GROUPS_EXCEPT	`null`
`remoteAuth.ldap.isAdminDn`	required DN to be able to login in Admin-Backend, "is_staff"-Attribute of AUTH_LDAP_USER_FLAGS_BY_GROUP	see values.yaml
`remoteAuth.ldap.isSuperUserDn`	required DN to receive SuperUser privileges, "is_superuser"-Attribute of AUTH_LDAP_USER_FLAGS_BY_GROUP	see values.yaml
`remoteAuth.ldap.attrFirstName`	first name attribute of users, "first_name"-Attribute of AUTH_LDAP_USER_ATTR_MAP	`givenName`
`remoteAuth.ldap.attrLastName`	last name attribute of users, "last_name"-Attribute of AUTH_LDAP_USER_ATTR_MAP	`sn`
`remoteAuth.ldap.attrMail`	mail attribute of users, "email_name"-Attribute of AUTH_LDAP_USER_ATTR_MAP	`mail`
`releaseCheck.url`	Release check URL (GitHub API URL; see `values.yaml`)	`null` (disabled by default)
`rqDefaultTimeout`	Maximum execution time for background tasks, in seconds	`300` (5 minutes)
`sessionCookieName`	The name to use for the session cookie	`"sessionid"`
`timeZone`	The time zone NetBox will use when dealing with dates and times	`UTC`
`dateFormat`	Django date format for long-form date strings	`"N j, Y"`
`shortDateFormat`	Django date format for short-form date strings	`"Y-m-d"`
`timeFormat`	Django date format for long-form time strings	`"g:i a"`
`shortTimeFormat`	Django date format for short-form time strings	`"H:i:s"`
`dateTimeFormat`	Django date format for long-form date and time strings	`"N j, Y g:i a"`
`shortDateTimeFormat`	Django date format for short-form date and time strongs	`"Y-m-d H:i"`
`secretKey`	Django secret key used for sessions and password reset tokens	`""` (generated)
`existingSecret`	Use an existing Kubernetes `Secret` for secret values (see below)	`""` (use individual chart values)
`extraConfig`	Additional NetBox configuration (see `values.yaml`)	`[]`
`postgresql.enabled`	Deploy PostgreSQL using bundled Bitnami PostgreSQL chart	`true`
`postgresql.postgresqlUsername`	Username to create for NetBox in bundled PostgreSQL instance	`netbox`
`postgresql.postgresqlDatabase`	Database to create for NetBox in bundled PostgreSQL instance	`netbox`
`postgresql.*`	Values under this key are passed to the bundled PostgreSQL chart	n/a
`externalDatabase.host`	PostgreSQL host to use when `postgresql.enabled` is `false`	`localhost`
`externalDatabase.port`	Port number for external PostgreSQL	`5432`
`externalDatabase.database`	Database name for external PostgreSQL	`netbox`
`externalDatabase.username`	Username for external PostgreSQL	`netbox`
`externalDatabase.password`	Password for external PostgreSQL (see also `existingSecret`)	`""`
`externalDatabase.existingSecretName`	Fetch password for external PostgreSQL from a different `Secret`	`""`
`externalDatabase.existingSecretKey`	Key to fetch the password in the above `Secret`	`postgresql-password`
`externalDatabase.sslMode`	PostgreSQL client SSL Mode setting	`prefer`
`externalDatabase.connMaxAge`	The lifetime of a database connection, as an integer of seconds	`300`
`redis.enabled`	Deploy Redis using bundled Bitnami Redis chart	`true`
`redis.*`	Values under this key are passed to the bundled Redis chart	n/a
`tasksRedis.database`	Redis database number used for NetBox task queue	`0`
`tasksRedis.ssl`	Enable SSL when connecting to Redis	`false`
`tasksRedis.insecureSkipTlsVerify`	Skip TLS certificate verification when connecting to Redis	`false`
`tasksRedis.host`	Redis host to use when `redis.enabled` is `false`	`"netbox-redis"`
`tasksRedis.port`	Port number for external Redis	`6379`
`tasksRedis.sentinels`	List of sentinels in `host:port` form (`host` and `port` not used)	`[]`
`tasksRedis.sentinelService`	Sentinel master service name	`"netbox-redis"`
`tasksRedis.sentinelTimeout`	Sentinel connection timeout, in seconds	`300` (5 minutes)
`tasksRedis.password`	Password for external Redis (see also `existingSecret`)	`""`
`tasksRedis.existingSecretName`	Fetch password for external Redis from a different `Secret`	`""`
`tasksRedis.existingSecretKey`	Key to fetch the password in the above `Secret`	`redis-password`
`cachingRedis.database`	Redis database number used for caching views	`1`
`cachingRedis.ssl`	Enable SSL when connecting to Redis	`false`
`cachingRedis.insecureSkipTlsVerify`	Skip TLS certificate verification when connecting to Redis	`false`
`cachingRedis.host`	Redis host to use when `redis.enabled` is `false`	`"netbox-redis"`
`cachingRedis.port`	Port number for external Redis	`6379`
`cachingRedis.sentinels`	List of sentinels in `host:port` form (`host` and `port` not used)	`[]`
`cachingRedis.sentinelService`	Sentinel master service name	`"netbox-redis"`
`cachingRedis.sentinelTimeout`	Sentinel connection timeout, in seconds	`300` (5 minutes)
`cachingRedis.password`	Password for external Redis (see also `existingSecret`)	`""`
`cachingRedis.existingSecretName`	Fetch password for external Redis from a different `Secret`	`""`
`cachingRedis.existingSecretKey`	Key to fetch the password in the above `Secret`	`redis-password`
`imagePullSecrets`	List of `Secret` names containing private registry credentials	`[]`
`nameOverride`	Override the application name (`netbox`) used throughout the chart	`""`
`fullnameOverride`	Override the full name of resources created as part of the release	`""`
`serviceAccount.create`	Create a ServiceAccount for NetBox	`true`
`serviceAccount.annotations`	Annotations to add to the service account	`{}`
`serviceAccount.name`	The name of the service account to use	`""` (use the fullname)
`persistence.enabled`	Enable storage persistence for uploaded media (images)	`true`
`persistence.existingClaim`	Use an existing `PersistentVolumeClaim` instead of creating one	`""`
`persistence.subPath`	Mount a sub-path of the volume into the container, not the root	`""`
`persistence.storageClass`	Set the storage class of the PVC (use `-` to disable provisioning)	`""`
`persistence.selector`	Set the selector for PVs, if desired	`{}`
`persistence.accessMode`	Access mode for the volume	`ReadWriteOnce`
`persistence.size`	Size of persistent volume to request	`1Gi`
`reportsPersistence.enabled`	Enable storage persistence for NetBox reports	`false`
`reportsPersistence.existingClaim`	Use an existing `PersistentVolumeClaim` instead of creating one	`""`
`reportsPersistence.subPath`	Mount a sub-path of the volume into the container, not the root	`""`
`reportsPersistence.storageClass`	Set the storage class of the PVC (use `-` to disable provisioning)	`""`
`reportsPersistence.selector`	Set the selector for PVs, if desired	`{}`
`reportsPersistence.accessMode`	Access mode for the volume	`ReadWriteOnce`
`reportsPersistence.size`	Size of persistent volume to request	`1Gi`
`podAnnotations`	Additional annotations for NetBox pods	`{}`
`podLabels`	Additional labels for NetBox pods	`{}`
`podSecurityContext`	Security context for NetBox pods	see `values.yaml`
`securityContext`	Security context for NetBox containers	see `values.yaml`
`service.type`	Type of `Service` resource to create	`ClusterIP`
`service.port`	Port number for the service	`80`
`service.nodePort`	The port used on the node when `service.type` is NodePort	`""`
`service.clusterIP`	The cluster IP address assigned to the service	`""`
`service.clusterIPs`	A list of cluster IP addresses assigned to the service	`[]`
`service.externalIPs`	A list of external IP addresses aliased to this service	`[]`
`service.externalTrafficPolicy`	Policy for routing external traffic	`""`
`service.ipFamilyPolicy`	Represents the dual-stack-ness of the service	`""`
`service.loadBalancerIP`	Request a specific IP address when `service.type` is LoadBalancer	`""`
`service.loadBalancerSourceRanges`	A list of allowed IP ranges when `service.type` is LoadBalancer	`[]`
`ingress.enabled`	Create an `Ingress` resource for accessing NetBox	`false`
`ingress.className`	Use a named IngressClass	`""`
`ingress.annotations`	Extra annotations to apply to the `Ingress` resource	`{}`
`ingress.hosts`	List of hosts and paths to map to the service (see `values.yaml`)	`[{host:"chart-example.local",paths:["/"]}]`
`ingress.tls`	TLS settings for the `Ingress` resource	`[]`
`resources`	Configure resource requests or limits for NetBox	`{}`
`readinessProbe.enabled`	Enable Kubernetes readinessProbe, see readiness probes	see `values.yaml`
`readinessProbe.initialDelaySeconds`	Number of seconds	see `values.yaml`
`readinessProbe.timeoutSeconds`	Number of seconds	see `values.yaml`
`readinessProbe.periodSeconds`	Number of seconds	see `values.yaml`
`readinessProbe.successThreshold`	Number of seconds	see `values.yaml`
`init.image.repository`	Init container image repository	`busybox`
`init.image.tag`	Init container image tag	`1.32.1`
`init.image.pullPolicy`	Init container image pull policy	`IfNotPresent`
`init.resources`	Configure resource requests or limits for init container	`{}`
`init.securityContext`	Security context for init container	see `values.yaml`
`autoscaling.enabled`	Whether to enable the HorizontalPodAutoscaler	`false`
`autoscaling.minReplicas`	Minimum number of replicas when autoscaling is enabled	`1`
`autoscaling.maxReplicas`	Maximum number of replicas when autoscaling is enabled	`100`
`autoscaling.targetCPUUtilizationPercentage`	Target CPU utilisation percentage for autoscaling	`80`
`autoscaling.targetMemoryUtilizationPercentage`	Target memory utilisation percentage for autoscaling	`null`
`nodeSelector`	Node labels for pod assignment	`{}`
`tolerations`	Toleration labels for pod assignment	`[]`
`updateStrategy`	Configure deployment update strategy	`{}` (defaults to `RollingUpdate`)
`affinity`	Affinity settings for pod assignment	`{}`
`extraEnvs`	Additional environment variables to set in the NetBox container	`[]`
`extraVolumeMounts`	Additional volumes to mount in the NetBox container	`[]`
`extraVolumes`	Additional volumes to reference in pods	`[]`
`extraContainers`	Additional sidecar containers to be added to pods	`[]`
`extraInitContainers`	Additional init containers to run before starting main containers	`[]`
`worker`	Worker specific variables. Most global variables also apply here.	see `values.yaml`
`housekeeping.enabled`	Whether the Housekeeping `CronJob` should be active	`true`
`housekeeping.concurrencyPolicy`	ConcurrencyPolicy for the Housekeeping CronJob.	`Forbid`
`housekeeping.failedJobsHistoryLimit`	Number of failed jobs to keep in history	`5`
`housekeeping.restartPolicy`	Restart Policy for the Housekeeping CronJob.	`OnFailure`
`housekeeping.schedule`	Schedule for the CronJob in Cron syntax.	`0 0 * * *` (Midnight daily)
`housekeeping.successfulJobsHistoryLimit`	Number of successful jobs to keep in history	`5`
`housekeeping.suspend`	Whether to suspend the CronJob	`false`
`housekeeping.podAnnotations`	Additional annotations for housekeeping CronJob pods	`{}`
`housekeeping.podLabels`	Additional labels for housekeeping CronJob pods	`{}`
`housekeeping.podSecurityContext`	Security context for housekeeping CronJob pods	see `values.yaml`
`housekeeping.securityContext`	Security context for housekeeping CronJob containers	see `values.yaml`
`housekeeping.resources`	Configure resource requests or limits for housekeeping CronJob	`{}`
`housekeeping.nodeSelector`	Node labels for housekeeping CronJob pod assignment	`{}`
`housekeeping.tolerations`	Toleration labels for housekeeping CronJob pod assignment	`[]`
`housekeeping.affinity`	Affinity settings for housekeeping CronJob pod assignment	`{}`
`housekeeping.extraEnvs`	Additional environment variables to set in housekeeping CronJob	`[]`
`housekeeping.extraVolumeMounts`	Additional volumes to mount in the housekeeping CronJob	`[]`
`housekeeping.extraVolumes`	Additional volumes to reference in housekeeping CronJob pods	`[]`
`housekeeping.extraContainers`	Additional sidecar containers to be added to housekeeping CronJob	`[]`
`housekeeping.extraInitContainers`	Additional init containers for housekeeping CronJob pods	`[]`

Specify each parameter using the --set key=value[,key=value] argument to helm install or provide a YAML file containing the values for the above parameters:

$ helm install --name my-release bootc/netbox --values values.yaml

Using an Existing Secret

Rather than specifying passwords and secrets as part of the Helm release values, you may pass these to NetBox using a pre-existing Secret resource. When using this, the Secret must contain the following keys:

Key	Description	Required?
`db_password`	The password for the external PostgreSQL database	If `postgresql.enabled` is `false` and `externalDatabase.existingSecretName` is unset
`email_password`	SMTP user password	Yes, but the value may be left blank if not required
`ldap_bind_password`	Password for LDAP bind DN	If `remoteAuth.enabled` is `true` and `remoteAuth.backend` is `netbox.authentication.LDAPBackend`
`napalm_password`	NAPALM user password	Yes, but the value may be left blank if not required
`redis_tasks_password`	Password for the external Redis tasks database	If `redis.enabled` is `false` and `tasksRedis.existingSecretName` is unset
`redis_cache_password`	Password for the external Redis cache database	If `redis.enabled` is `false` and `cachingRedis.existingSecretName` is unset
`secret_key`	Django secret key used for sessions and password reset tokens	Yes
`superuser_password`	Password for the initial super-user account	Yes
`superuser_api_token`	API token created for the initial super-user account	Yes

Using extraConfig for S3 storage configuration

If you want to use S3 as your storage backend and not have the config in the values.yaml (credentials!) you can use an existing secret that is then referenced under the extraConfig key.

The secret would look like this:

apiVersion: v1
kind: Secret
metadata:
  labels:
    app.kubernetes.io/instance: netbox
  name: netbox-extra
stringData:
  s3-config.yaml: |
    STORAGE_CONFIG:
      AWS_S3_ENDPOINT_URL: <endpoint-URL>
      AWS_S3_REGION_NAME: <region>
      AWS_STORAGE_BUCKET_NAME: <bucket-name>
      AWS_ACCESS_KEY_ID: <access-key>
      AWS_SECRET_ACCESS_KEY: <secret-key>

And the secret then has to be referenced like this:

extraConfig:
  - secret: # same as pod.spec.volumes.secret
      secretName: netbox-extra

Configuring SSO

You can leverage the extraConfig value in conjunction with remoteAuth to configure SSO. An example:

remoteAuth:
  enabled: true
  backend: social_core.backends.keycloak.KeycloakOAuth2
  autoCreateUser: false

extraConfig:
  - values:
      SOCIAL_AUTH_KEYCLOAK_KEY: 'netbox'
      SOCIAL_AUTH_KEYCLOAK_SECRET: 'HaveANiceDay'
      SOCIAL_AUTH_KEYCLOAK_PUBLIC_KEY: 'MII....'
      SOCIAL_AUTH_KEYCLOAK_AUTHORIZATION_URL: 'https://keycloak.yourdomain.com/auth/realms/YourRealm/protocol/openid-connect/auth'
      SOCIAL_AUTH_KEYCLOAK_ACCESS_TOKEN_URL: 'https://keycloak.yourdomain.com/auth/realms/YourRealm/protocol/openid-connect/token'
      SOCIAL_AUTH_KEYCLOAK_ID_KEY: 'email'
      SOCIAL_AUTH_JSONFIELD_ENABLED: True

Using LDAP Authentication

In order to enable LDAP authentication, please carry out the following steps:

Set image.tag in your values to an image with LDAP support (e.g. v3.0.11-ldap)
Configure the remoteAuth settings to enable the LDAP backend (see below)
Make sure you set all of the remoteAuth.ldap settings shown in the values.yaml file

For example:

remoteAuth:
  enabled: true
  backend: netbox.authentication.LDAPBackend
  ldap:
    serverUri: 'ldap://domain.com'
    startTls: true
    ignoreCertErrors: true
    bindDn: ''
    bindPassword: ''
    # and ALL the other remoteAuth.ldap.* settings from values.yaml

Note: in order to use anonymous LDAP binding set bindDn and bindPassword to an empty string as in the example above.

License

The following notice applies to all files contained within this Helm Chart and the Git repository which contains it:

Copyright 2019-2020 Chris Boot

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

License

gesv/netbox-chart

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Error
Looks like something went wrong!

Packages