Skip to content

SSM‐D2 Revision B

Jump to bottom
Peter Price edited this page Nov 28, 2023 · 5 revisions

Identification

The SSM-D2 Rev B has a black PCB and processor module.

It uses an E07-900M10S (10x10 mm)

The LED is next to the SDA pin on the processor module

SSM-D2 Rev B PCB SSM-D2 Rev B

Expected behaviour

  1. When you plug the device into the Host USB port the LED will light.

  2. When you open the serial port presented by the device from the Host the first line of output will report the firmware version like this:

# evofw3 0.7.3

  1. Whenever the first message is received or transmitted the LED will go out.

  2. Whenever another message is received or transmitted the LED will blink.

Clone this wiki locally