This project allow to control grblHAL based CNC machine withot PC. It also make work way more convinient.
Store: https://devtronic.square.site/
Source code for this project can be found there: https://github.com/nickshl/SmartPendant
Latest firmware placed in Release folder: SmartPendant.hex
To load new firmware STM32CubeProgrammer is used. Connect CNC controller to PC using USB-C cable. Press and hold BOOT0 button, then short press NRST button, couple seconds later BOOT0 button can be released. Open STM32CubeProgrammer. In top right corner choose "USB" from drop down list. If field "Port" in "USB Configuration" show "No DFU detected" click update button near it. Click "Connect" button - STM32CubeProgrammer should establish connection and show current device memory content. Click "Open File" in left to corner, select firmware HEX file, then click "Download" button in top left corner. When flashing is done, close STM32CubeProgrammer and short press NRST button on the Controller to restart it.
https://oshwlab.com/nick_shl/smart_pendant
To make this project yourself, you will need this essential parts:
-
One of this displays: 3.5" Display with touchscreen based on ILI9488 LCD controller and FT6236 touch controller - select option ILI9488 FT6236 3.5" Display with touchscreen based on ILI9488 LCD controller and FT6236 touch controller - select option ILI9488 FT6236 or IPS ILI9488 FT6236(in my opinion regular looks better) 3.5" Display with touchscreen based on ILI9488 LCD controller and FT6236 touch controller - select option ILI9488 FT6236 or IPS ILI9488 FT6236(in my opinion regular looks better)
3D_Print folder of this repo contain 3D files(OpenSCAD and STLs) of the case.
160 mm x 65 mm x 20 mm (55 mm with handwheel and handle) Approx. 6-3/8" x 2-5/8" x 3/4"
Source code can be found there