cmd/go: support cgo files in overlays

This requires rewriting the paths of the files passed to the cgo tool
toolchain to use the overlaid paths instead of the disk paths of
files. Because the directories of the overlaid paths don't exist in
general, the cgo tool have been updated to run in base.Cwd instead of
the package directory.

For #39958

Change-Id: I8986de889f56ecc2e64fa69f5f6f29fa907408f9
Reviewed-on: https://go-review.googlesource.com/c/go/+/262618
Trust: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>

src/cmd/go/internal/work/exec.go

@@ -8,6 +8,7 @@ package work
 
 import (
 	"bytes"
+	"cmd/go/internal/fsys"
 	"context"
 	"encoding/json"
 	"errors"
@@ -2242,8 +2243,6 @@ func (b *Builder) ccompile(a *Action, p *load.Package, outfile string, flags []s
 	// when -trimpath is enabled.
 	if b.gccSupportsFlag(compiler, "-fdebug-prefix-map=a=b") {
 		if cfg.BuildTrimpath {
-			// TODO(#39958): handle overlays
-
 			// Keep in sync with Action.trimpath.
 			// The trimmed paths are a little different, but we need to trim in the
 			// same situations.
@@ -2313,7 +2312,8 @@ func (b *Builder) gccld(a *Action, p *load.Package, objdir, outfile string, flag
 
 	cmdargs := []interface{}{cmd, "-o", outfile, objs, flags}
 	dir := p.Dir
-	out, err := b.runOut(a, dir, b.cCompilerEnv(), cmdargs...)
+	out, err := b.runOut(a, base.Cwd, b.cCompilerEnv(), cmdargs...)
+
 	if len(out) > 0 {
 		// Filter out useless linker warnings caused by bugs outside Go.
 		// See also cmd/link/internal/ld's hostlink method.
@@ -2641,7 +2641,8 @@ func (b *Builder) cgo(a *Action, cgoExe, objdir string, pcCFLAGS, pcLDFLAGS, cgo
 		cgoLDFLAGS = append([]string{"-fsanitize=memory"}, cgoLDFLAGS...)
 	}
 
-	// Allows including _cgo_export.h from .[ch] files in the package.
+	// Allows including _cgo_export.h, as well as the user's .h files,
+	// from .[ch] files in the package.
 	cgoCPPFLAGS = append(cgoCPPFLAGS, "-I", objdir)
 
 	// cgo
@@ -2654,6 +2655,8 @@ func (b *Builder) cgo(a *Action, cgoExe, objdir string, pcCFLAGS, pcLDFLAGS, cgo
 		cfiles = append(cfiles, f+".cgo2.c")
 	}
 
+	hfiles := append([]string{}, p.HFiles...)
+
 	// TODO: make cgo not depend on $GOARCH?
 
 	cgoflags := []string{}
@@ -2698,7 +2701,38 @@ func (b *Builder) cgo(a *Action, cgoExe, objdir string, pcCFLAGS, pcLDFLAGS, cgo
 		cgoflags = append(cgoflags, "-exportheader="+objdir+"_cgo_install.h")
 	}
 
-	if err := b.run(a, p.Dir, p.ImportPath, cgoenv, cfg.BuildToolexec, cgoExe, "-objdir", objdir, "-importpath", p.ImportPath, cgoflags, "--", cgoCPPFLAGS, cgoCFLAGS, cgofiles); err != nil {
+	execdir := p.Dir
+
+	// If any of the Cgo, C, or H files are overlaid, copy them all to
+	// objdir to ensure that they refer to the right header files.
+	// TODO(#39958): Ideally, we'd always do this, but this could
+	// subtly break some cgo files that include .h files across directory
+	// boundaries, even though they shouldn't.
+	hasOverlay := false
+	cgoFileLists := [][]string{cgofiles, gccfiles, gxxfiles, mfiles, ffiles, hfiles}
+OverlayLoop:
+	for _, fs := range cgoFileLists {
+		for _, f := range fs {
+			if _, ok := fsys.OverlayPath(mkAbs(p.Dir, f)); ok {
+				hasOverlay = true
+				break OverlayLoop
+			}
+		}
+	}
+	if hasOverlay {
+		execdir = objdir
+		for _, fs := range cgoFileLists {
+			for i := range fs {
+				opath, _ := fsys.OverlayPath(mkAbs(p.Dir, fs[i]))
+				fs[i] = objdir + filepath.Base(fs[i])
+				if err := b.copyFile(fs[i], opath, 0666, false); err != nil {
+					return nil, nil, err
+				}
+			}
+		}
+	}
+
+	if err := b.run(a, execdir, p.ImportPath, cgoenv, cfg.BuildToolexec, cgoExe, "-objdir", objdir, "-importpath", p.ImportPath, cgoflags, "--", cgoCPPFLAGS, cgoCFLAGS, cgofiles); err != nil {
 		return nil, nil, err
 	}
 	outGo = append(outGo, gofiles...)
@@ -2792,7 +2826,7 @@ func (b *Builder) dynimport(a *Action, p *load.Package, objdir, importGo, cgoExe
 		return err
 	}
 
-	linkobj := str.StringList(ofile, outObj, p.SysoFiles)
+	linkobj := str.StringList(ofile, outObj, mkAbsFiles(p.Dir, p.SysoFiles))
 	dynobj := objdir + "_cgo_.o"
 
 	// we need to use -pie for Linux/ARM to get accurate imported sym
@@ -2817,7 +2851,7 @@ func (b *Builder) dynimport(a *Action, p *load.Package, objdir, importGo, cgoExe
 	if p.Standard && p.ImportPath == "runtime/cgo" {
 		cgoflags = []string{"-dynlinker"} // record path to dynamic linker
 	}
-	return b.run(a, p.Dir, p.ImportPath, b.cCompilerEnv(), cfg.BuildToolexec, cgoExe, "-dynpackage", p.Name, "-dynimport", dynobj, "-dynout", importGo, cgoflags)
+	return b.run(a, base.Cwd, p.ImportPath, b.cCompilerEnv(), cfg.BuildToolexec, cgoExe, "-dynpackage", p.Name, "-dynimport", dynobj, "-dynout", importGo, cgoflags)
 }
 
 // Run SWIG on all SWIG input files.

src/cmd/go/internal/work/gc.go

@@ -262,7 +262,7 @@ func (a *Action) trimpath() string {
 	if len(objdir) > 1 && objdir[len(objdir)-1] == filepath.Separator {
 		objdir = objdir[:len(objdir)-1]
 	}
-	rewrite := objdir + "=>"
+	rewrite := ""
 
 	rewriteDir := a.Package.Dir
 	if cfg.BuildTrimpath {
@@ -271,7 +271,7 @@ func (a *Action) trimpath() string {
 		} else {
 			rewriteDir = a.Package.ImportPath
 		}
-		rewrite += ";" + a.Package.Dir + "=>" + rewriteDir
+		rewrite += a.Package.Dir + "=>" + rewriteDir + ";"
 	}
 
 	// Add rewrites for overlays. The 'from' and 'to' paths in overlays don't need to have
@@ -280,11 +280,14 @@ func (a *Action) trimpath() string {
 	if fsys.OverlayFile != "" {
 		for _, filename := range a.Package.AllFiles() {
 			overlayPath, ok := fsys.OverlayPath(filepath.Join(a.Package.Dir, filename))
+			rewrite += filepath.Join(objdir, filename) + "=>" + filepath.Join(rewriteDir, filename) + ";"
 			if !ok {
 				continue
 			}
-			rewrite += ";" + overlayPath + "=>" + filepath.Join(rewriteDir, filename)
+			rewrite += overlayPath + "=>" + filepath.Join(rewriteDir, filename) + ";"
 		}
+	} else {
+		rewrite += objdir + "=>"
 	}
 
 	return rewrite

src/cmd/go/testdata/script/build_overlay.txt

@@ -1,9 +1,11 @@
 [short] skip
 
 # Test building in overlays.
-# TODO(matloob): add a test case where the destination file in the replace map
+# TODO(#39958): add a test case where the destination file in the replace map
 #   isn't a go file. Either completely exclude that case in fs.IsDirWithGoFiles
 #   if the compiler doesn't allow it, or test that it works all the way.
+# TODO(#39958): add a test that both gc and gccgo assembly files can include .h
+#   files.
 
 # The main package (m) is contained in an overlay. It imports m/dir2 which has one
 # file in an overlay and one file outside the overlay, which in turn imports m/dir,
@@ -29,6 +31,18 @@ exec ./print_trimpath_two_files$GOEXE
 stdout $WORK[/\\]gopath[/\\]src[/\\]m[/\\]printpath[/\\]main.go
 stdout $WORK[/\\]gopath[/\\]src[/\\]m[/\\]printpath[/\\]other.go
 
+go build -overlay overlay.json -o main_cgo_replace$GOEXE ./cgo_hello_replace
+exec ./main_cgo_replace$GOEXE
+stdout '^hello cgo$'
+
+go build -overlay overlay.json -o main_cgo_quote$GOEXE ./cgo_hello_quote
+exec ./main_cgo_quote$GOEXE
+stdout '^hello cgo$'
+
+go build -overlay overlay.json -o main_cgo_angle$GOEXE ./cgo_hello_angle
+exec ./main_cgo_angle$GOEXE
+stdout '^hello cgo$'
+
 # Run same tests but with gccgo.
 env GO111MODULE=off
 [!exec:gccgo] stop
@@ -46,6 +60,19 @@ go build -compiler=gccgo -overlay overlay.json -o print_trimpath_gccgo$GOEXE -tr
 exec ./print_trimpath_gccgo$GOEXE
 stdout ^\.[/\\]printpath[/\\]main.go
 
+
+go build -compiler=gccgo  -overlay overlay.json -o main_cgo_replace_gccgo$GOEXE ./cgo_hello_replace
+exec ./main_cgo_replace_gccgo$GOEXE
+stdout '^hello cgo$'
+
+go build -compiler=gccgo  -overlay overlay.json -o main_cgo_quote_gccgo$GOEXE ./cgo_hello_quote
+exec ./main_cgo_quote_gccgo$GOEXE
+stdout '^hello cgo$'
+
+go build -compiler=gccgo  -overlay overlay.json -o main_cgo_angle_gccgo$GOEXE ./cgo_hello_angle
+exec ./main_cgo_angle_gccgo$GOEXE
+stdout '^hello cgo$'
+
 -- m/go.mod --
 // TODO(matloob): how do overlays work with go.mod (especially if mod=readonly)
 module m
@@ -71,9 +98,32 @@ the actual code is in the overlay
 		"dir/g.go": "overlay/dir_g.go",
 		"dir2/i.go": "overlay/dir2_i.go",
 		"printpath/main.go": "overlay/printpath.go",
-		"printpath/other.go": "overlay2/printpath2.go"
+		"printpath/other.go": "overlay2/printpath2.go",
+		"cgo_hello_replace/cgo_header.h": "overlay/cgo_head.h",
+		"cgo_hello_quote/cgo_hello.go": "overlay/cgo_hello_quote.go",
+		"cgo_hello_quote/cgo_header.h": "overlay/cgo_head.h",
+		"cgo_hello_angle/cgo_hello.go": "overlay/cgo_hello_angle.go",
+		"cgo_hello_angle/cgo_header.h": "overlay/cgo_head.h"
 	}
 }
+-- m/cgo_hello_replace/cgo_hello_replace.go --
+package main
+
+// #include "cgo_header.h"
+import "C"
+
+func main() {
+	C.say_hello()
+}
+-- m/cgo_hello_replace/cgo_header.h --
+ // Test that this header is replaced with one that has the proper declaration.
+void say_goodbye();
+
+-- m/cgo_hello_replace/goodbye.c --
+#include <stdio.h>
+
+void say_hello() { puts("hello cgo\n"); }
+
 -- m/overlay/f.go --
 package main
 
@@ -128,3 +178,32 @@ import "m/dir"
 func printMessage() {
 	dir.PrintMessage()
 }
+-- m/overlay/cgo_hello_quote.go --
+package main
+
+// #include "cgo_header.h"
+import "C"
+
+func main() {
+	C.say_hello()
+}
+-- m/overlay/cgo_hello_angle.go --
+package main
+
+// #include <cgo_header.h>
+import "C"
+
+func main() {
+	C.say_hello()
+}
+-- m/overlay/cgo_head.h --
+void say_hello();
+-- m/cgo_hello_quote/hello.c --
+#include <stdio.h>
+
+void say_hello() { puts("hello cgo\n"); }
+-- m/cgo_hello_angle/hello.c --
+#include <stdio.h>
+
+void say_hello() { puts("hello cgo\n"); }
+

src/cmd/go/testdata/script/build_trimpath_cgo.txt

@@ -20,10 +20,38 @@ go build -trimpath -o hello.exe .
 go run ./list-dwarf hello.exe
 ! stdout gopath/src
 
+
+# Do the above, with the cgo (but not .c) sources in an overlay
+# Check that the source path appears when -trimpath is not used.
+mkdir $WORK/overlay
+cp hello.go $WORK/overlay/hello.go
+mkdir hello_overlay
+cp hello.c hello_overlay/hello.c
+go build -overlay overlay.json -o hello_overlay.exe ./hello_overlay
+grep -q gopath[/\\]src hello_overlay.exe
+! grep -q $WORK[/\\]overlay hello_overlay.exe
+go run ./list-dwarf hello_overlay.exe
+stdout gopath[/\\]src
+! stdout $WORK[/\\]overlay
+
+# Check that the source path does not appear when -trimpath is used.
+go build -overlay overlay.json -trimpath -o hello_overlay.exe ./hello_overlay
+! grep -q gopath[/\\]src hello_overlay.exe
+! grep -q $WORK[/\\]overlay hello_overlay.exe
+go run ./list-dwarf hello_overlay.exe
+! stdout gopath/src
+! stdout $WORK[/\\]overlay
+
 -- go.mod --
 module m
 
 go 1.14
+-- overlay.json --
+{
+	"Replace": {
+		"hello_overlay/hello.go": "../../overlay/hello.go"
+	}
+}
 -- hello.c --
 #include <stdio.h>