Replies: 10 comments 2 replies
-
Can you post your configuration (with secrets removed)? The endpoint you gave is correct so it seems like there's something else going on here. |
Beta Was this translation helpful? Give feedback.
-
I found a problem, mimir image 2.6.0 has a big problem, I am using the
2.5.0 and is up right now.
:(
Em qui., 9 de fev. de 2023 às 12:42, Nick Pillitteri <
***@***.***> escreveu:
… Can you post your configuration (with secrets removed)? The endpoint you
gave is correct so it seems like there's something else going on here.
—
Reply to this email directly, view it on GitHub
<#4215 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AABEX6XI76PYCUNXW3S32TDWWUGADANCNFSM6AAAAAAUWWYFSI>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
--
Henrique Oliveira
DevOps Engineer/SRE.
Network Computer Graduated - FIC Estácio.
DevOps/SRE PosDegree - IGTI Education.
Site: elementar.me
Blog: ioricloud.gitlab.io/hugo-blog/
|
Beta Was this translation helpful? Give feedback.
-
What's going on with Mimir 2.6.0? Can you share more details, please? |
Beta Was this translation helpful? Give feedback.
-
I will get log errors and put here.
when I use previous version, ok, mimir is up, in 2.6.0 always stay down.
Em qui., 9 de fev. de 2023 às 14:47, Marco Pracucci <
***@***.***> escreveu:
… mimir image 2.6.0 has a big problem
What's going on with Mimir 2.6.0? Can you share more details, please?
—
Reply to this email directly, view it on GitHub
<#4215 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AABEX6TGWS4N5V5RUERT3W3WWUUUNANCNFSM6AAAAAAUWWYFSI>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
--
Henrique Oliveira
DevOps Engineer/SRE.
Network Computer Graduated - FIC Estácio.
DevOps/SRE PosDegree - IGTI Education.
Site: elementar.me
Blog: ioricloud.gitlab.io/hugo-blog/
|
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
-
Can you please share your |
Beta Was this translation helpful? Give feedback.
-
Could you check if you're hitting this issue, please? The discussion also shows how to fix it: |
Beta Was this translation helpful? Give feedback.
-
Hi Marco,
I didn't understand this thread, sorry.
Let me explain my strategy. I am using Mimir on Amazon ECS, about this, I
have a role with S3 admin via policy, I attached it via task definition
when I deploy my infrastructure. In this case, I don't need to create
credentials for S3.
What must I do?
Best Regards.
Em qua., 15 de fev. de 2023 às 05:37, Marco Pracucci <
***@***.***> escreveu:
… Could you check if you're hitting this issue, please? The discussion also
shows how to fix it:
#2613 (comment)
<#2613 (comment)>
—
Reply to this email directly, view it on GitHub
<#4215 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AABEX6R4C64BW5SUAHM23MDWXSIUNANCNFSM6AAAAAAUWWYFSI>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
--
Henrique Oliveira
DevOps Engineer/SRE.
Network Computer Graduated - FIC Estácio.
DevOps/SRE PosDegree - IGTI Education.
Site: elementar.me
Blog: ioricloud.gitlab.io/hugo-blog/
|
Beta Was this translation helpful? Give feedback.
-
I put in mimir.yaml region again but I got some warn.
level=warn ts=2023-03-01T22:06:39.676567576Z caller=sanity_check.go:115
msg="Unable to successfully connect to configured object storage (will
retry)" err="3 errors: blocks storage: unable to successfully send a
request to object storage: The authorization header is malformed; the
region 'us-east' is wrong; expecting 'us-east-1'; alertmanager storage:
unable to successfully send a request to object storage: The authorization
header is malformed; the region 'us-east' is wrong; expecting 'us-east-1';
ruler storage: unable to successfully send a request to object storage: The
authorization header is malformed; the region 'us-east' is wrong; expecting
'us-east-1'"
but is not my error
level=error ts=2023-03-01T22:08:01.499631575Z caller=mimir.go:791
msg="module failed" module=querier err="failed to start querier, because it
depends on module server, which has failed: invalid service state: Failed,
expected: Running, failure: failed to start server, because it depends on
module sanity-check, which has failed: invalid service state: Failed,
expected: Running, failure: invalid service state: Failed, expected:
Running, failure: 3 errors: blocks storage: unable to successfully send a
request to object storage: The authorization header is malformed; the
region 'us-east' is wrong; expecting 'us-east-1'; alertmanager storage:
unable to successfully send a request to object storage: The authorization
header is malformed; the region 'us-east' is wrong; expecting 'us-east-1';
ruler storage: unable to successfully send a request to object storage: The
authorization header is malformed; the region 'us-east' is wrong; expecting
'us-east-1'"
level=error ts=2023-03-01T22:08:01.499771587Z caller=mimir.go:791
msg="module failed" module=alertmanager err="failed to start alertmanager,
because it depends on module server, which has failed: invalid service
state: Failed, expected: Running, failure: failed to start server, because
it depends on module sanity-check, which has failed: invalid service state:
Failed, expected: Running, failure: invalid service state: Failed,
expected: Running, failure: 3 errors: blocks storage: unable to
successfully send a request to object storage: The authorization header is
malformed; the region 'us-east' is wrong; expecting 'us-east-1';
alertmanager storage: unable to successfully send a request to object
storage: The authorization header is malformed; the region 'us-east' is
wrong; expecting 'us-east-1'; ruler storage: unable to successfully send a
request to object storage: The authorization header is malformed; the
region 'us-east' is wrong; expecting 'us-east-1'"
level=error ts=2023-03-01T22:08:01.500094736Z caller=mimir.go:791
msg="module failed" module=store-queryable err="failed to start
store-queryable, because it depends on module sanity-check, which has
failed: invalid service state: Failed, expected: Running, failure: invalid
service state: Failed, expected: Running, failure: 3 errors: blocks
storage: unable to successfully send a request to object storage: The
authorization header is malformed; the region 'us-east' is wrong; expecting
'us-east-1'; alertmanager storage: unable to successfully send a request to
object storage: The authorization header is malformed; the region 'us-east'
is wrong; expecting 'us-east-1'; ruler storage: unable to successfully send
a request to object storage: The authorization header is malformed; the
region 'us-east' is wrong; expecting 'us-east-1'"
level=error ts=2023-03-01T22:08:01.50045999Z caller=mimir.go:791
msg="module failed" module=ruler err="failed to start ruler, because it
depends on module store-queryable, which has failed: invalid service state:
Failed, expected: Running, failure: failed to start store-queryable,
because it depends on module sanity-check, which has failed: invalid
service state: Failed, expected: Running, failure: invalid service state:
Failed, expected: Running, failure: 3 errors: blocks storage: unable to
successfully send a request to object storage: The authorization header is
malformed; the region 'us-east' is wrong; expecting 'us-east-1';
alertmanager storage: unable to successfully send a request to object
storage: The authorization header is malformed; the region 'us-east' is
wrong; expecting 'us-east-1'; ruler storage: unable to successfully send a
request to object storage: The authorization header is malformed; the
region 'us-east' is wrong; expecting 'us-east-1'"
Em sex., 24 de fev. de 2023 às 14:19, Marco Pracucci <
***@***.***> escreveu:
… As previously mentioned, I suggest to check if you're hit by this
<#2613 (comment)>.
The linked comment is almost self explanatory: there's a link to the AWS
doc explaining the issue and a command to change the behavior.
—
Reply to this email directly, view it on GitHub
<#4215 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AABEX6UWMZUCNE74MFBTHFDWZDUSTANCNFSM6AAAAAAUWWYFSI>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
--
Henrique Oliveira
DevOps Engineer/SRE.
Network Computer Graduated - FIC Estácio.
DevOps/SRE PosDegree - IGTI Education.
Site: elementar.me
Blog: ioricloud.gitlab.io/hugo-blog/
|
Beta Was this translation helpful? Give feedback.
-
Hi people.
I am trying to deploy mimir in my observability infrastructure and I have big problem here.
In config.yml I put endpoint s3.us-east-1.amazonaws.com
but always got s3 endpoint via ecs container.
ts=2023-02-09T15:30:50.964964464Z caller=log.go:65 level=error msg="error running application" err="no s3 endpoint in config file\ngithub.com/thanos-io/objstore/providers/s3.validate\n\t/__w/mimir/mimir/vendor/github.com/thanos-io/objstore/providers/s3/s3.go:347\ngithub.com/thanos-io/objstore/providers/s3.NewBucketWithConfig\n\t/__w/mimir/mimir/vendor/github.com/thanos-io/objstore/providers/s3/s3.go:218\ngithub.com/grafana/mimir/pkg/storage/bucket/s3.NewBucketClient\n\t/__w/mimir/mimir/pkg/storage/bucket/s3/bucket_client.go:22\ngithub.com/grafana/mimir/pkg/storage/bucket.NewClient\n\t/__w/mimir/mimir/pkg/storage/bucket/client.go:163\ngithub.com/grafana/mimir/pkg/ruler.NewRuleStore\n\t/__w/mimir/mimir/pkg/ruler/storage.go:32\ngithub.com/grafana/mimir/pkg/mimir.(*Mimir).initRulerStorage\n\t/__w/mimir/mimir/pkg/mimir/modules.go:597\ngithub.com/grafana/dskit/modules.(*Manager).initModule\n\t/__w/mimir/mimir/vendor/github.com/grafana/dskit/modules/modules.go:120\ngithub.com/grafana/dskit/modules.(*Manager).InitModuleServices\n\t/__w/mimir/mimir/vendor/github.com/grafana/dskit/modules/modules.go:92\ngithub.com/grafana/mimir/pkg/mimir.(*Mimir).Run\n\t/__w/mimir/mimir/pkg/mimir/mimir.go:752\nmain.main\n\t/__w/mimir/mimir/cmd/mimir/main.go:212\nruntime.main\n\t/usr/local/go/src/runtime/proc.go:250\nruntime.goexit\n\t/usr/local/go/src/runtime/asm_amd64.s:1594\nerror initialising module: ruler-storage\ngithub.com/grafana/dskit/modules.(*Manager).initModule\n\t/__w/mimir/mimir/vendor/github.com/grafana/dskit/modules/modules.go:122\ngithub.com/grafana/dskit/modules.(*Manager).InitModuleServices\n\t/__w/mimir/mimir/vendor/github.com/grafana/dskit/modules/modules.go:92\ngithub.com/grafana/mimir/pkg/mimir.(*Mimir).Run\n\t/__w/mimir/mimir/pkg/mimir/mimir.go:752\nmain.main\n\t/__w/mimir/mimir/cmd/mimir/main.go:212\nruntime.main\n\t/usr/local/go/src/runtime/proc.go:250\nruntime.goexit\n\t/usr/local/go/src/runtime/asm_amd64.s:1594"
What do I need to do right now?
Mimir image 2.6.0
Beta Was this translation helpful? Give feedback.
All reactions