Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

[LeetCode] 754. Reach a Number #754

Open
grandyang opened this issue May 30, 2019 · 0 comments
Open

[LeetCode] 754. Reach a Number #754

grandyang opened this issue May 30, 2019 · 0 comments

Comments

@grandyang
Copy link
Owner

grandyang commented May 30, 2019

 

You are standing at position 0 on an infinite number line. There is a goal at position target.

On each move, you can either go left or right. During the  n -th move (starting from 1), you take  n  steps.

Return the minimum number of steps required to reach the destination.

Example 1:

Input: target = 3
Output: 2
Explanation:
On the first move we step from 0 to 1.
On the second step we step from 1 to 3.

 

Example 2:

Input: target = 2
Output: 3
Explanation:
On the first move we step from 0 to 1.
On the second move we step  from 1 to -1.
On the third move we step from -1 to 2.

 

Note:

  • target will be a non-zero integer in the range [-10^9, 10^9].

 

这道题让我们从起点0开始,每次可以向数轴的左右两个方向中的任意一个走,第一步走距离1,第二步走距离2,以此类推,第n步走距离n,然后给了我们一个目标值 target,问最少用多少步可以到达这个值。博主分析了给的两个例子后,开始想的是用贪婪算法来做,就是如果加上距离大于目标值的话,就减去这个距离,到是当目标值是4的话,贪婪算法会fail。一般贪婪算法不行的话,很自然的博主就会想想能否用DP来做,但这道题感觉很难很难重现为子问题,因为每一步走的步数都不一样,这个步数又跟最小步数息息相关,所以很难写出状态转移方程啊,只得放弃。后来博主尝试用 BFS 来做,就是每次都把当前能到大的所有的点,都加上和减去当前距离,形成新的位置,加入数组中,当某个新的位置达到目标值时返回,但是这种解法会TLE,当目标值很大的话,相当的不高效。其实这道题的正确解法用到了些数学知识,还有一些小 trick,首先来说说小 trick,第一个 trick 是到达 target 和 -target 的步数相同,因为数轴是对称的,只要将到达 target 的每步的距离都取反,就能到达 -target。下面来说第二个 trick,这个是解题的关键,比如说目标值是4,那么如果一直累加步数,直到其正好大于等于target时,有:

0 + 1 = 1

1 + 2 = 3

3 + 3 = 6

第三步加上3,得到了6,超过了目标值4,超过了的距离为2,是偶数,那么实际上只要将加上距离为1的时候,不加1,而是加 -1,那么此时累加和就损失了2,那么正好能到目标值4,如下:

0 - 1 = -1

-1 + 2 = 1

1 + 3 = 4

这就是第二个 trick 啦,当超过目标值的差值d为偶数时,只要将第 d/2 步的距离取反,就能得到目标值,此时的步数即为到达目标值的步数。那么,如果d为奇数时,且当前为第n步,那么看下一步 n+1 的奇偶,如果 n+1 为奇数,则加上 n+1 再做差,得到的差值就为偶数了,问题解决,如果 n+1 为偶数,则还得加上 n+2 这个奇数,才能让差值为偶数,这样就多加了两步。分析到这里,解题思路也就明晰了吧:

先对 target 取绝对值,因为正负不影响最小步数。然后求出第n步,使得从1累加到n刚好大于等于 target,那么利用求和公式就有:

target = n * (n + 1) / 2

变成一元二次方程方程即为:

n^2 + n - 2*target = 0

用初中的一元二次方程的求和公式,就有:

n = (-1 + sqrt(1 + 8*target)) / 2

当然算出来可能不是整数,所以要取整,这里使用 ceil 来取整。如果此时 sum 和 target 正好相等,perfect!直接返回n,否则就是计算差值,如果差值时偶数,那么也直接返回n,如果是奇数,判断此时n的奇偶,如果n是奇数,则返回 n+2,若n是偶数,返回 n+1,参见代码如下:

 

解法一:

class Solution {
public:
    int reachNumber(int target) {
        target = abs(target);
        long n = ceil((-1.0 + sqrt(1 + 8.0 * target)) / 2);
        long sum = n * (n + 1) / 2;
        if (sum == target) return n;
        long res = sum - target;
        if ((res & 1) == 0) return n;
        return n + ((n & 1) ? 2 : 1);
    }
};

 

我们也可以不用求和公式来快速定位n,而是通过累加来做,res 为我们的当前步数,也是最终需要返回的结果,sum 是加上每步距离的累加值,如果 sum 小于 target,或者 sum 减去 target 的差值为奇数,我们进行循环,步数 res 自增1,然后 sum 加上步数 res,最后跳出循环的条件就是差值为偶数,也符合我们上的分析,参见代码如下:

 

解法二:

class Solution {
public:
    int reachNumber(int target) {
        target = abs(target);
        int res = 0, sum = 0;
        while (sum < target || (sum - target) % 2 == 1) {
            ++res;
            sum += res;
        }
        return res;
    }
};

 

下面这种解法是解法一的精简版,两行搞定碉堡了!

 

解法三:

class Solution {
public:
    int reachNumber(int target) {
        int n = ceil((sqrt(1 + 8.0 * abs(target)) - 1) / 2), d = n * (n + 1) / 2 - target;
        return n + (d % 2) * (n % 2 + 1);
    }
};

 

Github 同步地址:

#754

 

参考资料:

https://leetcode.com/problems/reach-a-number/

https://leetcode.com/problems/reach-a-number/discuss/112969/C++-O(1)-Solution-without-loop

https://leetcode.com/problems/reach-a-number/discuss/112992/Learn-from-other-with-my-explanations

https://leetcode.com/problems/reach-a-number/discuss/112982/2-liner-a-math-problem-with-explanation

 

LeetCode All in One 题目讲解汇总(持续更新中...)

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

1 participant