Interface between a Siglent oscilloscope and FY6800 AWG
The idea bases on solution proposed by 4x1md in https://github.com/4x1md/sds1004x_bode
Currently implemented features:
- ESP is able to connect to a selected WiFi network and listen to oscilloscope requests
- After ESP sends request to AWG it waits for confirmation
TODO:
- rewrite whole thing to C++, so adding new AWGs would be easier
- add possibility to configure SSID/PSK + IP without flashing the new SW
Currently supported AWG's:
- FY6800
- FY6900
You can view a video with the SDS-1204X-E and the FY6900 here https://www.youtube.com/watch?v=3_4DelT9P2A
!WARNING! FY6800 VCC level is 5V, so it has to be dropped somehow to 3.3V ESP may release the magic smoke otherwise.
In my configuration I've just used a yellow LED, that dropped the voltage by ~2V. ESP consumes about 70mA, that's probably too much for a LED, but maybe it'll survive.
