HEAD

Hanson Environment for Application Development

Prerequisites
TL;DR
Native install, build and run
Other options of hrtool
LXC Install, build and run directions
Troubleshooting

This repository contains the integrated code for controlling and interacting with various Hanson Robotics robot heads, including a pure-software implementation. It includes the full theatrical performance pipeline and infrastructure:

Vision and audio perception, via ROS webcam and microphone nodes.
Face detection, for seeing faces in the room.
Blender robot model, for animating movements and facial expressions.
Behavior tree, for scripting performaces.
Motor control ROS nodes, for controlling the physical robot.

Prerequisites

Hardware

Intel/AMD workstation or laptop w/4GB or more RAM, 20GB disk, and a fairly powerful graphics card.
If a dedicated workstation is not available, consider using LXC, so as to not mess up your base OS.

Software

Ubuntu 14.04 is installed. Only Ubuntu 14.04 is supported.
X Server is running.
Use root or create user with the ability to gain root privileges.

TL;DR

Install dependencies, get source code, build. This may take several hours.

sudo apt-get update && sudo apt-get install wget && wget https://raw.githubusercontent.com/hansonrobotics/HEAD/master/scripts/hrtool -O /tmp/hrtool && chmod +x /tmp/hrtool && /tmp/hrtool -iGBy

Then run

~/hansonrobotics/HEAD/scripts/dev.sh

Native install, build and run

Use these instructions, if you are willing to install the system "natively" on your machine (i.e. into the root file system). Otherwise, use the LXC instructions, further down below. Install may take several hours; a fast internet connection is strongly recommended.

Install wget

sudo apt-get install wget (Run apt-get update first if wget is not found)

Get hrtool

wget https://raw.githubusercontent.com/hansonrobotics/HEAD/master/scripts/hrtool -O /tmp/hrtool

Make it executable

chmod +x /tmp/hrtool

Optionally, set the workspace. The default workspace is ~/hansonrobotics

/tmp/hrtool -w <workspace>

Install dependencies

/tmp/hrtool -i

Get HEAD and OpenCog source code

/tmp/hrtool -G

Remove hrtool. After the source code is built, this script is not needed anymore. A copy of the script is in <workspace>/scripts/hrtool/hrtool

rm /tmp/hrtool

Build the HR workspace and OpenCog

~/hansonrobotics/HEAD/scripts/hrtool -B

Run

cd ~/hansonrobotics/HEAD/scripts && ./dev.sh

Open a web browser

HTTP: http://127.0.0.1:8000/ or HTTPS: https://127.0.0.1:4000/

Other options of hrtool

The hrtool script is located in ~/hansonrobotics/HEAD/scripts

-s Build a single ROS package and it's related dependecies.
-v Get the latest code for the cmt vision system.
-d Get the latest OpenCog source code (developer mode -- this is the unstable branch). Use this option only if you want to get the latest OpenCog stack. It will change the remote of git repositories for OpenCog to the OpenCog domain.
-U Update the code to the latest, including both HEAD and the OpenCog stack.
-c Clean up OpenCog installation and cache.
-h Show more options.

Other options for running HEAD.

cd ~/hansonrobotics/HEAD/scripts

Run with cmt as default camera tracker

./dev.sh --cmt

Run with OpenCog chatbot instead of AIML based chatbot.

./dev.sh --oc

Run vision tools

./vision.sh cmt #For running with cmt/pi_vision

LXC Install, build and run directions

LXC -- Linux Containers -- is a tool that allows you to run a virtualized operating system container on your machine. Because each container can have a different root file system, it is convenient for experiments, and for isolating your main system from robot-related configuration issues. One can run multiple containers, too -- even dozens or more.

Start by installing LXC: review LXC Getting Started

sudo apt-get install lxc
lxc-create -t download -n my-hr-HEAD -- -d ubuntu -r trusty -a amd64
lxc-start -n my-hr-HEAD -d
lxc-attach -n my-hr-HEAD --clear-env
(then, at the prompt of the attached container):
apt-get install openssh-server
cd /home/ubuntu
mkdir .ssh
cd .ssh
(add your public key, e.g. cat mykey.pub >> ~/.ssh/authorized_keys)
(or use an editor to edit authorized_keys)
chmod go-rwx . authorized_keys
chown ubuntu:ubuntu . authorized_keys
passwd ubuntu
(change passwd -- this is needed because hrtool needs it)

After the above, you should be able to ssh into your new container. After doing so, the instructions are essentially the same as the native install. These are repeated below.

lxc-ls -f
ssh -X ubuntu@10.0.3.239  (or whatever IP address lxc-ls shows)
sudo apt-get install wget
wget https://raw.githubusercontent.com/hansonrobotics/HEAD/master/scripts/hrtool -O /tmp/hrtool
chmod +x /tmp/hrtool
/tmp/hrtool -i
/tmp/hrtool -G
rm /tmp/hrtool
~/hansonrobotics/HEAD/scripts/hrtool -B

Enabling the webcam in LXC

To get video (the webcam, used for vision) working from an LXC container, you will need to do some config file tinkering. Edit the file ~/.local/share/lxc/my-hr-HEAD/config (on your local filesystem, NOT in the container!) and add the lines:

lxc.cgroup.devices.allow = c 81:0 rwm
lxc.mount.entry = /dev/video0 dev/video0 none bind,optional,create=file

The above assumes that your webcam appears at /dev/video0 and that the device major:minor is 81:0 and that its a character (c) device. You may need to adjust this for your specific webcam. Be sure to stop and restart the container, to pick up this change. Next (and this is very annoying) udev fails to create the webcam runtime configuration, and so you have to do the below, manually, every time you start the container. On the master system:

scp /run/udev/data/c81:0 ubuntu@10.0.3.239:/home/ubuntu

In the container:

sudo mkdir /run/udev/data
sudo cp /home/ubuntu/c81:0 /run/udev/data
sudo chown root:root /run/udev/data/c81:0

If you know of a better way, let us know!

To test the webcam, try running cheese -- it should work. You may need to apt-get install cheese first.

Troubleshooting

pip3 is not found

Install pip3 (again): apt-get install -y --reinstall python3-pip

Workspace warning

[WARN] The workspace configured /home/ubuntu/hansonrobotics doesn't match the your working path / Continue using /home/ubuntu/hansonrobotics? [y/N]

If you are using /tmp/hrtool, you can ignore this error. From this point forward, use <workspace>/scripts/hrtool instead.

hansonrobotics/HEAD

ErrorLooks like something went wrong!

About

Resources

Uh oh!

Stars

Watchers

Forks

Releases 6

Packages 0

Uh oh!

Contributors 16

Languages

Error
Looks like something went wrong!

Packages