backports: Fix out of tree build #108
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Dmole
pushed a commit
to Dmole/linux
that referenced
this pull request
Apr 19, 2018
commit 85ea29f upstream. At put_v4l2_window32(), it tries to access kp->clips. However, kp points to an userspace pointer. So, it should be obtained via get_user(), otherwise it can OOPS: vivid-000: ================== END STATUS ================== BUG: unable to handle kernel paging request at 00000000fffb18e0 IP: [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev] PGD 3f5776067 PUD 3f576f067 PMD 3f5769067 PTE 800000042548f067 Oops: 0001 [hardkernel#1] SMP Modules linked in: vivid videobuf2_vmalloc videobuf2_memops v4l2_dv_timings videobuf2_core v4l2_common videodev media xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill binfmt_misc snd_hda_codec_hdmi i915 snd_hda_intel snd_hda_controller snd_hda_codec intel_rapl x86_pkg_temp_thermal snd_hwdep intel_powerclamp snd_pcm coretemp snd_seq_midi kvm_intel kvm snd_seq_midi_event snd_rawmidi i2c_algo_bit drm_kms_helper snd_seq drm crct10dif_pclmul e1000e snd_seq_device crc32_pclmul snd_timer ghash_clmulni_intel snd mei_me mei ptp pps_core soundcore lpc_ich video crc32c_intel [last unloaded: media] CPU: 2 PID: 28332 Comm: v4l2-compliance Not tainted 3.18.102+ hardkernel#107 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 task: ffff8804293f8000 ti: ffff8803f5640000 task.ti: ffff8803f5640000 RIP: 0010:[<ffffffffc05468d9>] [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev] RSP: 0018:ffff8803f5643e28 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000fffb1ab4 RDX: 00000000fffb1a68 RSI: 00000000fffb18d8 RDI: 00000000fffb1aa8 RBP: ffff8803f5643e48 R08: 0000000000000001 R09: ffff8803f54b0378 R10: 0000000000000000 R11: 0000000000000168 R12: 00000000fffb18c0 R13: 00000000fffb1a94 R14: 00000000fffb18c8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880456d00000(0063) knlGS:00000000f7100980 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000fffb18e0 CR3: 00000003f552b000 CR4: 00000000003407e0 Stack: 00000000fffb1a94 00000000c0cc5640 0000000000000056 ffff8804274f3600 ffff8803f5643ed0 ffffffffc0547e16 0000000000000003 ffff8803f5643eb0 ffffffff81301460 ffff88009db44b01 ffff880441942520 ffff8800c0d05640 Call Trace: [<ffffffffc0547e16>] v4l2_compat_ioctl32+0x12d6/0x1b1d [videodev] [<ffffffff81301460>] ? file_has_perm+0x70/0xc0 [<ffffffff81252a2c>] compat_SyS_ioctl+0xec/0x1200 [<ffffffff8173241a>] sysenter_dispatch+0x7/0x21 Code: 00 00 48 8b 80 48 c0 ff ff 48 83 e8 38 49 39 c6 0f 87 2b ff ff ff 49 8d 45 1c e8 a3 ce e3 c0 85 c0 0f 85 1a ff ff ff 41 8d 40 ff <4d> 8b 64 24 20 41 89 d5 48 8d 44 40 03 4d 8d 34 c4 eb 15 0f 1f RIP [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev] RSP <ffff8803f5643e28> CR2: 00000000fffb18e0 Tested with vivid driver on Kernel v3.18.102. Same bug happens upstream too: BUG: KASAN: user-memory-access in __put_v4l2_format32+0x98/0x4d0 [videodev] Read of size 8 at addr 00000000ffe48400 by task v4l2-compliance/8713 CPU: 0 PID: 8713 Comm: v4l2-compliance Not tainted 4.16.0-rc4+ hardkernel#108 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 Call Trace: dump_stack+0x5c/0x7c kasan_report+0x164/0x380 ? __put_v4l2_format32+0x98/0x4d0 [videodev] __put_v4l2_format32+0x98/0x4d0 [videodev] v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev] ? __fsnotify_inode_delete+0x20/0x20 ? __put_v4l2_format32+0x4d0/0x4d0 [videodev] compat_SyS_ioctl+0x646/0x14d0 ? do_ioctl+0x30/0x30 do_fast_syscall_32+0x191/0x3f4 entry_SYSENTER_compat+0x6b/0x7a ================================================================== Disabling lock debugging due to kernel taint BUG: unable to handle kernel paging request at 00000000ffe48400 IP: __put_v4l2_format32+0x98/0x4d0 [videodev] PGD 3a22fb067 P4D 3a22fb067 PUD 39b6f0067 PMD 39b6f1067 PTE 80000003256af067 Oops: 0001 [hardkernel#1] SMP KASAN Modules linked in: vivid videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops v4l2_tpg v4l2_dv_timings videobuf2_v4l2 videobuf2_common v4l2_common videodev xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill ecdh_generic binfmt_misc snd_hda_codec_hdmi intel_rapl x86_pkg_temp_thermal intel_powerclamp i915 coretemp snd_hda_intel snd_hda_codec kvm_intel snd_hwdep snd_hda_core kvm snd_pcm irqbypass crct10dif_pclmul crc32_pclmul snd_seq_midi ghash_clmulni_intel snd_seq_midi_event i2c_algo_bit intel_cstate snd_rawmidi intel_uncore snd_seq drm_kms_helper e1000e snd_seq_device snd_timer intel_rapl_perf drm ptp snd mei_me mei lpc_ich pps_core soundcore video crc32c_intel CPU: 0 PID: 8713 Comm: v4l2-compliance Tainted: G B 4.16.0-rc4+ hardkernel#108 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 RIP: 0010:__put_v4l2_format32+0x98/0x4d0 [videodev] RSP: 0018:ffff8803b9be7d30 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8803ac983e80 RCX: ffffffff8cd929f2 RDX: 1ffffffff1d0a149 RSI: 0000000000000297 RDI: 0000000000000297 RBP: 00000000ffe485c0 R08: fffffbfff1cf5123 R09: ffffffff8e7a8948 R10: 0000000000000001 R11: fffffbfff1cf5122 R12: 00000000ffe483e0 R13: 00000000ffe485c4 R14: ffff8803ac985918 R15: 00000000ffe483e8 FS: 0000000000000000(0000) GS:ffff880407400000(0063) knlGS:00000000f7a46980 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000ffe48400 CR3: 00000003a83f2003 CR4: 00000000003606f0 Call Trace: v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev] ? __fsnotify_inode_delete+0x20/0x20 ? __put_v4l2_format32+0x4d0/0x4d0 [videodev] compat_SyS_ioctl+0x646/0x14d0 ? do_ioctl+0x30/0x30 do_fast_syscall_32+0x191/0x3f4 entry_SYSENTER_compat+0x6b/0x7a Code: 4c 89 f7 4d 8d 7c 24 08 e8 e6 a4 69 cb 48 8b 83 98 1a 00 00 48 83 e8 10 49 39 c7 0f 87 9d 01 00 00 49 8d 7c 24 20 e8 c8 a4 69 cb <4d> 8b 74 24 20 4c 89 ef 4c 89 fe ba 10 00 00 00 e8 23 d9 08 cc RIP: __put_v4l2_format32+0x98/0x4d0 [videodev] RSP: ffff8803b9be7d30 CR2: 00000000ffe48400 cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmole
pushed a commit
to Dmole/linux
that referenced
this pull request
May 18, 2018
commit 85ea29f upstream. At put_v4l2_window32(), it tries to access kp->clips. However, kp points to an userspace pointer. So, it should be obtained via get_user(), otherwise it can OOPS: vivid-000: ================== END STATUS ================== BUG: unable to handle kernel paging request at 00000000fffb18e0 IP: [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev] PGD 3f5776067 PUD 3f576f067 PMD 3f5769067 PTE 800000042548f067 Oops: 0001 [hardkernel#1] SMP Modules linked in: vivid videobuf2_vmalloc videobuf2_memops v4l2_dv_timings videobuf2_core v4l2_common videodev media xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill binfmt_misc snd_hda_codec_hdmi i915 snd_hda_intel snd_hda_controller snd_hda_codec intel_rapl x86_pkg_temp_thermal snd_hwdep intel_powerclamp snd_pcm coretemp snd_seq_midi kvm_intel kvm snd_seq_midi_event snd_rawmidi i2c_algo_bit drm_kms_helper snd_seq drm crct10dif_pclmul e1000e snd_seq_device crc32_pclmul snd_timer ghash_clmulni_intel snd mei_me mei ptp pps_core soundcore lpc_ich video crc32c_intel [last unloaded: media] CPU: 2 PID: 28332 Comm: v4l2-compliance Not tainted 3.18.102+ hardkernel#107 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 task: ffff8804293f8000 ti: ffff8803f5640000 task.ti: ffff8803f5640000 RIP: 0010:[<ffffffffc05468d9>] [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev] RSP: 0018:ffff8803f5643e28 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000fffb1ab4 RDX: 00000000fffb1a68 RSI: 00000000fffb18d8 RDI: 00000000fffb1aa8 RBP: ffff8803f5643e48 R08: 0000000000000001 R09: ffff8803f54b0378 R10: 0000000000000000 R11: 0000000000000168 R12: 00000000fffb18c0 R13: 00000000fffb1a94 R14: 00000000fffb18c8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880456d00000(0063) knlGS:00000000f7100980 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000fffb18e0 CR3: 00000003f552b000 CR4: 00000000003407e0 Stack: 00000000fffb1a94 00000000c0cc5640 0000000000000056 ffff8804274f3600 ffff8803f5643ed0 ffffffffc0547e16 0000000000000003 ffff8803f5643eb0 ffffffff81301460 ffff88009db44b01 ffff880441942520 ffff8800c0d05640 Call Trace: [<ffffffffc0547e16>] v4l2_compat_ioctl32+0x12d6/0x1b1d [videodev] [<ffffffff81301460>] ? file_has_perm+0x70/0xc0 [<ffffffff81252a2c>] compat_SyS_ioctl+0xec/0x1200 [<ffffffff8173241a>] sysenter_dispatch+0x7/0x21 Code: 00 00 48 8b 80 48 c0 ff ff 48 83 e8 38 49 39 c6 0f 87 2b ff ff ff 49 8d 45 1c e8 a3 ce e3 c0 85 c0 0f 85 1a ff ff ff 41 8d 40 ff <4d> 8b 64 24 20 41 89 d5 48 8d 44 40 03 4d 8d 34 c4 eb 15 0f 1f RIP [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev] RSP <ffff8803f5643e28> CR2: 00000000fffb18e0 Tested with vivid driver on Kernel v3.18.102. Same bug happens upstream too: BUG: KASAN: user-memory-access in __put_v4l2_format32+0x98/0x4d0 [videodev] Read of size 8 at addr 00000000ffe48400 by task v4l2-compliance/8713 CPU: 0 PID: 8713 Comm: v4l2-compliance Not tainted 4.16.0-rc4+ hardkernel#108 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 Call Trace: dump_stack+0x5c/0x7c kasan_report+0x164/0x380 ? __put_v4l2_format32+0x98/0x4d0 [videodev] __put_v4l2_format32+0x98/0x4d0 [videodev] v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev] ? __fsnotify_inode_delete+0x20/0x20 ? __put_v4l2_format32+0x4d0/0x4d0 [videodev] compat_SyS_ioctl+0x646/0x14d0 ? do_ioctl+0x30/0x30 do_fast_syscall_32+0x191/0x3f4 entry_SYSENTER_compat+0x6b/0x7a ================================================================== Disabling lock debugging due to kernel taint BUG: unable to handle kernel paging request at 00000000ffe48400 IP: __put_v4l2_format32+0x98/0x4d0 [videodev] PGD 3a22fb067 P4D 3a22fb067 PUD 39b6f0067 PMD 39b6f1067 PTE 80000003256af067 Oops: 0001 [hardkernel#1] SMP KASAN Modules linked in: vivid videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops v4l2_tpg v4l2_dv_timings videobuf2_v4l2 videobuf2_common v4l2_common videodev xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill ecdh_generic binfmt_misc snd_hda_codec_hdmi intel_rapl x86_pkg_temp_thermal intel_powerclamp i915 coretemp snd_hda_intel snd_hda_codec kvm_intel snd_hwdep snd_hda_core kvm snd_pcm irqbypass crct10dif_pclmul crc32_pclmul snd_seq_midi ghash_clmulni_intel snd_seq_midi_event i2c_algo_bit intel_cstate snd_rawmidi intel_uncore snd_seq drm_kms_helper e1000e snd_seq_device snd_timer intel_rapl_perf drm ptp snd mei_me mei lpc_ich pps_core soundcore video crc32c_intel CPU: 0 PID: 8713 Comm: v4l2-compliance Tainted: G B 4.16.0-rc4+ hardkernel#108 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 RIP: 0010:__put_v4l2_format32+0x98/0x4d0 [videodev] RSP: 0018:ffff8803b9be7d30 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8803ac983e80 RCX: ffffffff8cd929f2 RDX: 1ffffffff1d0a149 RSI: 0000000000000297 RDI: 0000000000000297 RBP: 00000000ffe485c0 R08: fffffbfff1cf5123 R09: ffffffff8e7a8948 R10: 0000000000000001 R11: fffffbfff1cf5122 R12: 00000000ffe483e0 R13: 00000000ffe485c4 R14: ffff8803ac985918 R15: 00000000ffe483e8 FS: 0000000000000000(0000) GS:ffff880407400000(0063) knlGS:00000000f7a46980 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000ffe48400 CR3: 00000003a83f2003 CR4: 00000000003606f0 Call Trace: v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev] ? __fsnotify_inode_delete+0x20/0x20 ? __put_v4l2_format32+0x4d0/0x4d0 [videodev] compat_SyS_ioctl+0x646/0x14d0 ? do_ioctl+0x30/0x30 do_fast_syscall_32+0x191/0x3f4 entry_SYSENTER_compat+0x6b/0x7a Code: 4c 89 f7 4d 8d 7c 24 08 e8 e6 a4 69 cb 48 8b 83 98 1a 00 00 48 83 e8 10 49 39 c7 0f 87 9d 01 00 00 49 8d 7c 24 20 e8 c8 a4 69 cb <4d> 8b 74 24 20 4c 89 ef 4c 89 fe ba 10 00 00 00 e8 23 d9 08 cc RIP: __put_v4l2_format32+0x98/0x4d0 [videodev] RSP: ffff8803b9be7d30 CR2: 00000000ffe48400 cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr
pushed a commit
that referenced
this pull request
Oct 23, 2018
commit 85ea29f upstream. At put_v4l2_window32(), it tries to access kp->clips. However, kp points to an userspace pointer. So, it should be obtained via get_user(), otherwise it can OOPS: vivid-000: ================== END STATUS ================== BUG: unable to handle kernel paging request at 00000000fffb18e0 IP: [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev] PGD 3f5776067 PUD 3f576f067 PMD 3f5769067 PTE 800000042548f067 Oops: 0001 [#1] SMP Modules linked in: vivid videobuf2_vmalloc videobuf2_memops v4l2_dv_timings videobuf2_core v4l2_common videodev media xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill binfmt_misc snd_hda_codec_hdmi i915 snd_hda_intel snd_hda_controller snd_hda_codec intel_rapl x86_pkg_temp_thermal snd_hwdep intel_powerclamp snd_pcm coretemp snd_seq_midi kvm_intel kvm snd_seq_midi_event snd_rawmidi i2c_algo_bit drm_kms_helper snd_seq drm crct10dif_pclmul e1000e snd_seq_device crc32_pclmul snd_timer ghash_clmulni_intel snd mei_me mei ptp pps_core soundcore lpc_ich video crc32c_intel [last unloaded: media] CPU: 2 PID: 28332 Comm: v4l2-compliance Not tainted 3.18.102+ #107 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 task: ffff8804293f8000 ti: ffff8803f5640000 task.ti: ffff8803f5640000 RIP: 0010:[<ffffffffc05468d9>] [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev] RSP: 0018:ffff8803f5643e28 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000fffb1ab4 RDX: 00000000fffb1a68 RSI: 00000000fffb18d8 RDI: 00000000fffb1aa8 RBP: ffff8803f5643e48 R08: 0000000000000001 R09: ffff8803f54b0378 R10: 0000000000000000 R11: 0000000000000168 R12: 00000000fffb18c0 R13: 00000000fffb1a94 R14: 00000000fffb18c8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880456d00000(0063) knlGS:00000000f7100980 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000fffb18e0 CR3: 00000003f552b000 CR4: 00000000003407e0 Stack: 00000000fffb1a94 00000000c0cc5640 0000000000000056 ffff8804274f3600 ffff8803f5643ed0 ffffffffc0547e16 0000000000000003 ffff8803f5643eb0 ffffffff81301460 ffff88009db44b01 ffff880441942520 ffff8800c0d05640 Call Trace: [<ffffffffc0547e16>] v4l2_compat_ioctl32+0x12d6/0x1b1d [videodev] [<ffffffff81301460>] ? file_has_perm+0x70/0xc0 [<ffffffff81252a2c>] compat_SyS_ioctl+0xec/0x1200 [<ffffffff8173241a>] sysenter_dispatch+0x7/0x21 Code: 00 00 48 8b 80 48 c0 ff ff 48 83 e8 38 49 39 c6 0f 87 2b ff ff ff 49 8d 45 1c e8 a3 ce e3 c0 85 c0 0f 85 1a ff ff ff 41 8d 40 ff <4d> 8b 64 24 20 41 89 d5 48 8d 44 40 03 4d 8d 34 c4 eb 15 0f 1f RIP [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev] RSP <ffff8803f5643e28> CR2: 00000000fffb18e0 Tested with vivid driver on Kernel v3.18.102. Same bug happens upstream too: BUG: KASAN: user-memory-access in __put_v4l2_format32+0x98/0x4d0 [videodev] Read of size 8 at addr 00000000ffe48400 by task v4l2-compliance/8713 CPU: 0 PID: 8713 Comm: v4l2-compliance Not tainted 4.16.0-rc4+ #108 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 Call Trace: dump_stack+0x5c/0x7c kasan_report+0x164/0x380 ? __put_v4l2_format32+0x98/0x4d0 [videodev] __put_v4l2_format32+0x98/0x4d0 [videodev] v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev] ? __fsnotify_inode_delete+0x20/0x20 ? __put_v4l2_format32+0x4d0/0x4d0 [videodev] compat_SyS_ioctl+0x646/0x14d0 ? do_ioctl+0x30/0x30 do_fast_syscall_32+0x191/0x3f4 entry_SYSENTER_compat+0x6b/0x7a ================================================================== Disabling lock debugging due to kernel taint BUG: unable to handle kernel paging request at 00000000ffe48400 IP: __put_v4l2_format32+0x98/0x4d0 [videodev] PGD 3a22fb067 P4D 3a22fb067 PUD 39b6f0067 PMD 39b6f1067 PTE 80000003256af067 Oops: 0001 [#1] SMP KASAN Modules linked in: vivid videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops v4l2_tpg v4l2_dv_timings videobuf2_v4l2 videobuf2_common v4l2_common videodev xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill ecdh_generic binfmt_misc snd_hda_codec_hdmi intel_rapl x86_pkg_temp_thermal intel_powerclamp i915 coretemp snd_hda_intel snd_hda_codec kvm_intel snd_hwdep snd_hda_core kvm snd_pcm irqbypass crct10dif_pclmul crc32_pclmul snd_seq_midi ghash_clmulni_intel snd_seq_midi_event i2c_algo_bit intel_cstate snd_rawmidi intel_uncore snd_seq drm_kms_helper e1000e snd_seq_device snd_timer intel_rapl_perf drm ptp snd mei_me mei lpc_ich pps_core soundcore video crc32c_intel CPU: 0 PID: 8713 Comm: v4l2-compliance Tainted: G B 4.16.0-rc4+ #108 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 RIP: 0010:__put_v4l2_format32+0x98/0x4d0 [videodev] RSP: 0018:ffff8803b9be7d30 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8803ac983e80 RCX: ffffffff8cd929f2 RDX: 1ffffffff1d0a149 RSI: 0000000000000297 RDI: 0000000000000297 RBP: 00000000ffe485c0 R08: fffffbfff1cf5123 R09: ffffffff8e7a8948 R10: 0000000000000001 R11: fffffbfff1cf5122 R12: 00000000ffe483e0 R13: 00000000ffe485c4 R14: ffff8803ac985918 R15: 00000000ffe483e8 FS: 0000000000000000(0000) GS:ffff880407400000(0063) knlGS:00000000f7a46980 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000ffe48400 CR3: 00000003a83f2003 CR4: 00000000003606f0 Call Trace: v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev] ? __fsnotify_inode_delete+0x20/0x20 ? __put_v4l2_format32+0x4d0/0x4d0 [videodev] compat_SyS_ioctl+0x646/0x14d0 ? do_ioctl+0x30/0x30 do_fast_syscall_32+0x191/0x3f4 entry_SYSENTER_compat+0x6b/0x7a Code: 4c 89 f7 4d 8d 7c 24 08 e8 e6 a4 69 cb 48 8b 83 98 1a 00 00 48 83 e8 10 49 39 c7 0f 87 9d 01 00 00 49 8d 7c 24 20 e8 c8 a4 69 cb <4d> 8b 74 24 20 4c 89 ef 4c 89 fe ba 10 00 00 00 e8 23 d9 08 cc RIP: __put_v4l2_format32+0x98/0x4d0 [videodev] RSP: ffff8803b9be7d30 CR2: 00000000ffe48400 Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Owersun
pushed a commit
to Owersun/linux-hardkernel
that referenced
this pull request
Dec 17, 2018
[ Upstream commit 9410d38 ] __qdisc_drop_all() accesses skb->prev to get to the tail of the segment-list. With commit 68d2f84 ("net: gro: properly remove skb from list") the skb-list handling has been changed to set skb->next to NULL and set the list-poison on skb->prev. With that change, __qdisc_drop_all() will panic when it tries to dereference skb->prev. Since commit 992cba7 ("net: Add and use skb_list_del_init().") __list_del_entry is used, leaving skb->prev unchanged (thus, pointing to the list-head if it's the first skb of the list). This will make __qdisc_drop_all modify the next-pointer of the list-head and result in a panic later on: [ 34.501053] general protection fault: 0000 [#1] SMP KASAN PTI [ 34.501968] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.20.0-rc2.mptcp hardkernel#108 [ 34.502887] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011 [ 34.504074] RIP: 0010:dev_gro_receive+0x343/0x1f90 [ 34.504751] Code: e0 48 c1 e8 03 42 80 3c 30 00 0f 85 4a 1c 00 00 4d 8b 24 24 4c 39 65 d0 0f 84 0a 04 00 00 49 8d 7c 24 38 48 89 f8 48 c1 e8 03 <42> 0f b6 04 30 84 c0 74 08 3c 04 [ 34.507060] RSP: 0018:ffff8883af507930 EFLAGS: 00010202 [ 34.507761] RAX: 0000000000000007 RBX: ffff8883970b2c80 RCX: 1ffff11072e165a6 [ 34.508640] RDX: 1ffff11075867008 RSI: ffff8883ac338040 RDI: 0000000000000038 [ 34.509493] RBP: ffff8883af5079d0 R08: ffff8883970b2d40 R09: 0000000000000062 [ 34.510346] R10: 0000000000000034 R11: 0000000000000000 R12: 0000000000000000 [ 34.511215] R13: 0000000000000000 R14: dffffc0000000000 R15: ffff8883ac338008 [ 34.512082] FS: 0000000000000000(0000) GS:ffff8883af500000(0000) knlGS:0000000000000000 [ 34.513036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 34.513741] CR2: 000055ccc3e9d020 CR3: 00000003abf32000 CR4: 00000000000006e0 [ 34.514593] Call Trace: [ 34.514893] <IRQ> [ 34.515157] napi_gro_receive+0x93/0x150 [ 34.515632] receive_buf+0x893/0x3700 [ 34.516094] ? __netif_receive_skb+0x1f/0x1a0 [ 34.516629] ? virtnet_probe+0x1b40/0x1b40 [ 34.517153] ? __stable_node_chain+0x4d0/0x850 [ 34.517684] ? kfree+0x9a/0x180 [ 34.518067] ? __kasan_slab_free+0x171/0x190 [ 34.518582] ? detach_buf+0x1df/0x650 [ 34.519061] ? lapic_next_event+0x5a/0x90 [ 34.519539] ? virtqueue_get_buf_ctx+0x280/0x7f0 [ 34.520093] virtnet_poll+0x2df/0xd60 [ 34.520533] ? receive_buf+0x3700/0x3700 [ 34.521027] ? qdisc_watchdog_schedule_ns+0xd5/0x140 [ 34.521631] ? htb_dequeue+0x1817/0x25f0 [ 34.522107] ? sch_direct_xmit+0x142/0xf30 [ 34.522595] ? virtqueue_napi_schedule+0x26/0x30 [ 34.523155] net_rx_action+0x2f6/0xc50 [ 34.523601] ? napi_complete_done+0x2f0/0x2f0 [ 34.524126] ? kasan_check_read+0x11/0x20 [ 34.524608] ? _raw_spin_lock+0x7d/0xd0 [ 34.525070] ? _raw_spin_lock_bh+0xd0/0xd0 [ 34.525563] ? kvm_guest_apic_eoi_write+0x6b/0x80 [ 34.526130] ? apic_ack_irq+0x9e/0xe0 [ 34.526567] __do_softirq+0x188/0x4b5 [ 34.527015] irq_exit+0x151/0x180 [ 34.527417] do_IRQ+0xdb/0x150 [ 34.527783] common_interrupt+0xf/0xf [ 34.528223] </IRQ> This patch makes sure that skb->prev is set to NULL when entering netem_enqueue. Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Fixes: 68d2f84 ("net: gro: properly remove skb from list") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emerald-Phoenix
pushed a commit
to Emerald-Phoenix/linux
that referenced
this pull request
Jan 1, 2019
[ Upstream commit 9410d38 ] __qdisc_drop_all() accesses skb->prev to get to the tail of the segment-list. With commit 68d2f84 ("net: gro: properly remove skb from list") the skb-list handling has been changed to set skb->next to NULL and set the list-poison on skb->prev. With that change, __qdisc_drop_all() will panic when it tries to dereference skb->prev. Since commit 992cba7 ("net: Add and use skb_list_del_init().") __list_del_entry is used, leaving skb->prev unchanged (thus, pointing to the list-head if it's the first skb of the list). This will make __qdisc_drop_all modify the next-pointer of the list-head and result in a panic later on: [ 34.501053] general protection fault: 0000 [hardkernel#1] SMP KASAN PTI [ 34.501968] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.20.0-rc2.mptcp hardkernel#108 [ 34.502887] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011 [ 34.504074] RIP: 0010:dev_gro_receive+0x343/0x1f90 [ 34.504751] Code: e0 48 c1 e8 03 42 80 3c 30 00 0f 85 4a 1c 00 00 4d 8b 24 24 4c 39 65 d0 0f 84 0a 04 00 00 49 8d 7c 24 38 48 89 f8 48 c1 e8 03 <42> 0f b6 04 30 84 c0 74 08 3c 04 [ 34.507060] RSP: 0018:ffff8883af507930 EFLAGS: 00010202 [ 34.507761] RAX: 0000000000000007 RBX: ffff8883970b2c80 RCX: 1ffff11072e165a6 [ 34.508640] RDX: 1ffff11075867008 RSI: ffff8883ac338040 RDI: 0000000000000038 [ 34.509493] RBP: ffff8883af5079d0 R08: ffff8883970b2d40 R09: 0000000000000062 [ 34.510346] R10: 0000000000000034 R11: 0000000000000000 R12: 0000000000000000 [ 34.511215] R13: 0000000000000000 R14: dffffc0000000000 R15: ffff8883ac338008 [ 34.512082] FS: 0000000000000000(0000) GS:ffff8883af500000(0000) knlGS:0000000000000000 [ 34.513036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 34.513741] CR2: 000055ccc3e9d020 CR3: 00000003abf32000 CR4: 00000000000006e0 [ 34.514593] Call Trace: [ 34.514893] <IRQ> [ 34.515157] napi_gro_receive+0x93/0x150 [ 34.515632] receive_buf+0x893/0x3700 [ 34.516094] ? __netif_receive_skb+0x1f/0x1a0 [ 34.516629] ? virtnet_probe+0x1b40/0x1b40 [ 34.517153] ? __stable_node_chain+0x4d0/0x850 [ 34.517684] ? kfree+0x9a/0x180 [ 34.518067] ? __kasan_slab_free+0x171/0x190 [ 34.518582] ? detach_buf+0x1df/0x650 [ 34.519061] ? lapic_next_event+0x5a/0x90 [ 34.519539] ? virtqueue_get_buf_ctx+0x280/0x7f0 [ 34.520093] virtnet_poll+0x2df/0xd60 [ 34.520533] ? receive_buf+0x3700/0x3700 [ 34.521027] ? qdisc_watchdog_schedule_ns+0xd5/0x140 [ 34.521631] ? htb_dequeue+0x1817/0x25f0 [ 34.522107] ? sch_direct_xmit+0x142/0xf30 [ 34.522595] ? virtqueue_napi_schedule+0x26/0x30 [ 34.523155] net_rx_action+0x2f6/0xc50 [ 34.523601] ? napi_complete_done+0x2f0/0x2f0 [ 34.524126] ? kasan_check_read+0x11/0x20 [ 34.524608] ? _raw_spin_lock+0x7d/0xd0 [ 34.525070] ? _raw_spin_lock_bh+0xd0/0xd0 [ 34.525563] ? kvm_guest_apic_eoi_write+0x6b/0x80 [ 34.526130] ? apic_ack_irq+0x9e/0xe0 [ 34.526567] __do_softirq+0x188/0x4b5 [ 34.527015] irq_exit+0x151/0x180 [ 34.527417] do_IRQ+0xdb/0x150 [ 34.527783] common_interrupt+0xf/0xf [ 34.528223] </IRQ> This patch makes sure that skb->prev is set to NULL when entering netem_enqueue. Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Fixes: 68d2f84 ("net: gro: properly remove skb from list") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr
pushed a commit
that referenced
this pull request
Jan 23, 2019
[ Upstream commit 9410d38 ] __qdisc_drop_all() accesses skb->prev to get to the tail of the segment-list. With commit 68d2f84 ("net: gro: properly remove skb from list") the skb-list handling has been changed to set skb->next to NULL and set the list-poison on skb->prev. With that change, __qdisc_drop_all() will panic when it tries to dereference skb->prev. Since commit 992cba7 ("net: Add and use skb_list_del_init().") __list_del_entry is used, leaving skb->prev unchanged (thus, pointing to the list-head if it's the first skb of the list). This will make __qdisc_drop_all modify the next-pointer of the list-head and result in a panic later on: [ 34.501053] general protection fault: 0000 [#1] SMP KASAN PTI [ 34.501968] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.20.0-rc2.mptcp #108 [ 34.502887] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011 [ 34.504074] RIP: 0010:dev_gro_receive+0x343/0x1f90 [ 34.504751] Code: e0 48 c1 e8 03 42 80 3c 30 00 0f 85 4a 1c 00 00 4d 8b 24 24 4c 39 65 d0 0f 84 0a 04 00 00 49 8d 7c 24 38 48 89 f8 48 c1 e8 03 <42> 0f b6 04 30 84 c0 74 08 3c 04 [ 34.507060] RSP: 0018:ffff8883af507930 EFLAGS: 00010202 [ 34.507761] RAX: 0000000000000007 RBX: ffff8883970b2c80 RCX: 1ffff11072e165a6 [ 34.508640] RDX: 1ffff11075867008 RSI: ffff8883ac338040 RDI: 0000000000000038 [ 34.509493] RBP: ffff8883af5079d0 R08: ffff8883970b2d40 R09: 0000000000000062 [ 34.510346] R10: 0000000000000034 R11: 0000000000000000 R12: 0000000000000000 [ 34.511215] R13: 0000000000000000 R14: dffffc0000000000 R15: ffff8883ac338008 [ 34.512082] FS: 0000000000000000(0000) GS:ffff8883af500000(0000) knlGS:0000000000000000 [ 34.513036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 34.513741] CR2: 000055ccc3e9d020 CR3: 00000003abf32000 CR4: 00000000000006e0 [ 34.514593] Call Trace: [ 34.514893] <IRQ> [ 34.515157] napi_gro_receive+0x93/0x150 [ 34.515632] receive_buf+0x893/0x3700 [ 34.516094] ? __netif_receive_skb+0x1f/0x1a0 [ 34.516629] ? virtnet_probe+0x1b40/0x1b40 [ 34.517153] ? __stable_node_chain+0x4d0/0x850 [ 34.517684] ? kfree+0x9a/0x180 [ 34.518067] ? __kasan_slab_free+0x171/0x190 [ 34.518582] ? detach_buf+0x1df/0x650 [ 34.519061] ? lapic_next_event+0x5a/0x90 [ 34.519539] ? virtqueue_get_buf_ctx+0x280/0x7f0 [ 34.520093] virtnet_poll+0x2df/0xd60 [ 34.520533] ? receive_buf+0x3700/0x3700 [ 34.521027] ? qdisc_watchdog_schedule_ns+0xd5/0x140 [ 34.521631] ? htb_dequeue+0x1817/0x25f0 [ 34.522107] ? sch_direct_xmit+0x142/0xf30 [ 34.522595] ? virtqueue_napi_schedule+0x26/0x30 [ 34.523155] net_rx_action+0x2f6/0xc50 [ 34.523601] ? napi_complete_done+0x2f0/0x2f0 [ 34.524126] ? kasan_check_read+0x11/0x20 [ 34.524608] ? _raw_spin_lock+0x7d/0xd0 [ 34.525070] ? _raw_spin_lock_bh+0xd0/0xd0 [ 34.525563] ? kvm_guest_apic_eoi_write+0x6b/0x80 [ 34.526130] ? apic_ack_irq+0x9e/0xe0 [ 34.526567] __do_softirq+0x188/0x4b5 [ 34.527015] irq_exit+0x151/0x180 [ 34.527417] do_IRQ+0xdb/0x150 [ 34.527783] common_interrupt+0xf/0xf [ 34.528223] </IRQ> This patch makes sure that skb->prev is set to NULL when entering netem_enqueue. Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Fixes: 68d2f84 ("net: gro: properly remove skb from list") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr
pushed a commit
that referenced
this pull request
Feb 13, 2019
[ Upstream commit 9410d38 ] __qdisc_drop_all() accesses skb->prev to get to the tail of the segment-list. With commit 68d2f84 ("net: gro: properly remove skb from list") the skb-list handling has been changed to set skb->next to NULL and set the list-poison on skb->prev. With that change, __qdisc_drop_all() will panic when it tries to dereference skb->prev. Since commit 992cba7 ("net: Add and use skb_list_del_init().") __list_del_entry is used, leaving skb->prev unchanged (thus, pointing to the list-head if it's the first skb of the list). This will make __qdisc_drop_all modify the next-pointer of the list-head and result in a panic later on: [ 34.501053] general protection fault: 0000 [#1] SMP KASAN PTI [ 34.501968] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.20.0-rc2.mptcp #108 [ 34.502887] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011 [ 34.504074] RIP: 0010:dev_gro_receive+0x343/0x1f90 [ 34.504751] Code: e0 48 c1 e8 03 42 80 3c 30 00 0f 85 4a 1c 00 00 4d 8b 24 24 4c 39 65 d0 0f 84 0a 04 00 00 49 8d 7c 24 38 48 89 f8 48 c1 e8 03 <42> 0f b6 04 30 84 c0 74 08 3c 04 [ 34.507060] RSP: 0018:ffff8883af507930 EFLAGS: 00010202 [ 34.507761] RAX: 0000000000000007 RBX: ffff8883970b2c80 RCX: 1ffff11072e165a6 [ 34.508640] RDX: 1ffff11075867008 RSI: ffff8883ac338040 RDI: 0000000000000038 [ 34.509493] RBP: ffff8883af5079d0 R08: ffff8883970b2d40 R09: 0000000000000062 [ 34.510346] R10: 0000000000000034 R11: 0000000000000000 R12: 0000000000000000 [ 34.511215] R13: 0000000000000000 R14: dffffc0000000000 R15: ffff8883ac338008 [ 34.512082] FS: 0000000000000000(0000) GS:ffff8883af500000(0000) knlGS:0000000000000000 [ 34.513036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 34.513741] CR2: 000055ccc3e9d020 CR3: 00000003abf32000 CR4: 00000000000006e0 [ 34.514593] Call Trace: [ 34.514893] <IRQ> [ 34.515157] napi_gro_receive+0x93/0x150 [ 34.515632] receive_buf+0x893/0x3700 [ 34.516094] ? __netif_receive_skb+0x1f/0x1a0 [ 34.516629] ? virtnet_probe+0x1b40/0x1b40 [ 34.517153] ? __stable_node_chain+0x4d0/0x850 [ 34.517684] ? kfree+0x9a/0x180 [ 34.518067] ? __kasan_slab_free+0x171/0x190 [ 34.518582] ? detach_buf+0x1df/0x650 [ 34.519061] ? lapic_next_event+0x5a/0x90 [ 34.519539] ? virtqueue_get_buf_ctx+0x280/0x7f0 [ 34.520093] virtnet_poll+0x2df/0xd60 [ 34.520533] ? receive_buf+0x3700/0x3700 [ 34.521027] ? qdisc_watchdog_schedule_ns+0xd5/0x140 [ 34.521631] ? htb_dequeue+0x1817/0x25f0 [ 34.522107] ? sch_direct_xmit+0x142/0xf30 [ 34.522595] ? virtqueue_napi_schedule+0x26/0x30 [ 34.523155] net_rx_action+0x2f6/0xc50 [ 34.523601] ? napi_complete_done+0x2f0/0x2f0 [ 34.524126] ? kasan_check_read+0x11/0x20 [ 34.524608] ? _raw_spin_lock+0x7d/0xd0 [ 34.525070] ? _raw_spin_lock_bh+0xd0/0xd0 [ 34.525563] ? kvm_guest_apic_eoi_write+0x6b/0x80 [ 34.526130] ? apic_ack_irq+0x9e/0xe0 [ 34.526567] __do_softirq+0x188/0x4b5 [ 34.527015] irq_exit+0x151/0x180 [ 34.527417] do_IRQ+0xdb/0x150 [ 34.527783] common_interrupt+0xf/0xf [ 34.528223] </IRQ> This patch makes sure that skb->prev is set to NULL when entering netem_enqueue. Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Fixes: 68d2f84 ("net: gro: properly remove skb from list") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mihailescu2m
pushed a commit
to mihailescu2m/linux
that referenced
this pull request
Dec 14, 2019
[ Upstream commit 7eb9d76 ] We need to calculate the skb size correctly otherwise we risk triggering skb_over_panic[1]. The issue is that data_len is added to the skb in a nl attribute, but we don't account for its header size (nlattr 4 bytes) and alignment. We account for it when calculating the total size in the > PSAMPLE_MAX_PACKET_SIZE comparison correctly, but not when allocating after that. The fix is simple - use nla_total_size() for data_len when allocating. To reproduce: $ tc qdisc add dev eth1 clsact $ tc filter add dev eth1 egress matchall action sample rate 1 group 1 trunc 129 $ mausezahn eth1 -b bcast -a rand -c 1 -p 129 < skb_over_panic BUG(), tail is 4 bytes past skb->end > [1] Trace: [ 50.459526][ T3480] skbuff: skb_over_panic: text:(____ptrval____) len:196 put:136 head:(____ptrval____) data:(____ptrval____) tail:0xc4 end:0xc0 dev:<NULL> [ 50.474339][ T3480] ------------[ cut here ]------------ [ 50.481132][ T3480] kernel BUG at net/core/skbuff.c:108! [ 50.486059][ T3480] invalid opcode: 0000 [#1] PREEMPT SMP [ 50.489463][ T3480] CPU: 3 PID: 3480 Comm: mausezahn Not tainted 5.4.0-rc7 hardkernel#108 [ 50.492844][ T3480] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 [ 50.496551][ T3480] RIP: 0010:skb_panic+0x79/0x7b [ 50.498261][ T3480] Code: bc 00 00 00 41 57 4c 89 e6 48 c7 c7 90 29 9a 83 4c 8b 8b c0 00 00 00 50 8b 83 b8 00 00 00 50 ff b3 c8 00 00 00 e8 ae ef c0 fe <0f> 0b e8 2f df c8 fe 48 8b 55 08 44 89 f6 4c 89 e7 48 c7 c1 a0 22 [ 50.504111][ T3480] RSP: 0018:ffffc90000447a10 EFLAGS: 00010282 [ 50.505835][ T3480] RAX: 0000000000000087 RBX: ffff888039317d00 RCX: 0000000000000000 [ 50.507900][ T3480] RDX: 0000000000000000 RSI: ffffffff812716e1 RDI: 00000000ffffffff [ 50.509820][ T3480] RBP: ffffc90000447a60 R08: 0000000000000001 R09: 0000000000000000 [ 50.511735][ T3480] R10: ffffffff81d4f940 R11: 0000000000000000 R12: ffffffff834a22b0 [ 50.513494][ T3480] R13: ffffffff82c10433 R14: 0000000000000088 R15: ffffffff838a8084 [ 50.515222][ T3480] FS: 00007f3536462700(0000) GS:ffff88803eac0000(0000) knlGS:0000000000000000 [ 50.517135][ T3480] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 50.518583][ T3480] CR2: 0000000000442008 CR3: 000000003b222000 CR4: 00000000000006e0 [ 50.520723][ T3480] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 50.522709][ T3480] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 50.524450][ T3480] Call Trace: [ 50.525214][ T3480] skb_put.cold+0x1b/0x1b [ 50.526171][ T3480] psample_sample_packet+0x1d3/0x340 [ 50.527307][ T3480] tcf_sample_act+0x178/0x250 [ 50.528339][ T3480] tcf_action_exec+0xb1/0x190 [ 50.529354][ T3480] mall_classify+0x67/0x90 [ 50.530332][ T3480] tcf_classify+0x72/0x160 [ 50.531286][ T3480] __dev_queue_xmit+0x3db/0xd50 [ 50.532327][ T3480] dev_queue_xmit+0x18/0x20 [ 50.533299][ T3480] packet_sendmsg+0xee7/0x2090 [ 50.534331][ T3480] sock_sendmsg+0x54/0x70 [ 50.535271][ T3480] __sys_sendto+0x148/0x1f0 [ 50.536252][ T3480] ? tomoyo_file_ioctl+0x23/0x30 [ 50.537334][ T3480] ? ksys_ioctl+0x5e/0xb0 [ 50.540068][ T3480] __x64_sys_sendto+0x2a/0x30 [ 50.542810][ T3480] do_syscall_64+0x73/0x1f0 [ 50.545383][ T3480] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 50.548477][ T3480] RIP: 0033:0x7f35357d6fb3 [ 50.551020][ T3480] Code: 48 8b 0d 18 90 20 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d f9 d3 20 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 eb f6 ff ff 48 89 04 24 [ 50.558547][ T3480] RSP: 002b:00007ffe0c7212c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 50.561870][ T3480] RAX: ffffffffffffffda RBX: 0000000001dac010 RCX: 00007f35357d6fb3 [ 50.565142][ T3480] RDX: 0000000000000082 RSI: 0000000001dac2a2 RDI: 0000000000000003 [ 50.568469][ T3480] RBP: 00007ffe0c7212f0 R08: 00007ffe0c7212d0 R09: 0000000000000014 [ 50.571731][ T3480] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000082 [ 50.574961][ T3480] R13: 0000000001dac2a2 R14: 0000000000000001 R15: 0000000000000003 [ 50.578170][ T3480] Modules linked in: sch_ingress virtio_net [ 50.580976][ T3480] ---[ end trace 61a515626a595af6 ]--- CC: Yotam Gigi <yotamg@mellanox.com> CC: Jiri Pirko <jiri@mellanox.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> CC: Simon Horman <simon.horman@netronome.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> Fixes: 6ae0a62 ("net: Introduce psample, a new genetlink channel for packet sampling") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr
pushed a commit
that referenced
this pull request
Jan 15, 2020
[ Upstream commit 7eb9d76 ] We need to calculate the skb size correctly otherwise we risk triggering skb_over_panic[1]. The issue is that data_len is added to the skb in a nl attribute, but we don't account for its header size (nlattr 4 bytes) and alignment. We account for it when calculating the total size in the > PSAMPLE_MAX_PACKET_SIZE comparison correctly, but not when allocating after that. The fix is simple - use nla_total_size() for data_len when allocating. To reproduce: $ tc qdisc add dev eth1 clsact $ tc filter add dev eth1 egress matchall action sample rate 1 group 1 trunc 129 $ mausezahn eth1 -b bcast -a rand -c 1 -p 129 < skb_over_panic BUG(), tail is 4 bytes past skb->end > [1] Trace: [ 50.459526][ T3480] skbuff: skb_over_panic: text:(____ptrval____) len:196 put:136 head:(____ptrval____) data:(____ptrval____) tail:0xc4 end:0xc0 dev:<NULL> [ 50.474339][ T3480] ------------[ cut here ]------------ [ 50.481132][ T3480] kernel BUG at net/core/skbuff.c:108! [ 50.486059][ T3480] invalid opcode: 0000 [#1] PREEMPT SMP [ 50.489463][ T3480] CPU: 3 PID: 3480 Comm: mausezahn Not tainted 5.4.0-rc7 #108 [ 50.492844][ T3480] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 [ 50.496551][ T3480] RIP: 0010:skb_panic+0x79/0x7b [ 50.498261][ T3480] Code: bc 00 00 00 41 57 4c 89 e6 48 c7 c7 90 29 9a 83 4c 8b 8b c0 00 00 00 50 8b 83 b8 00 00 00 50 ff b3 c8 00 00 00 e8 ae ef c0 fe <0f> 0b e8 2f df c8 fe 48 8b 55 08 44 89 f6 4c 89 e7 48 c7 c1 a0 22 [ 50.504111][ T3480] RSP: 0018:ffffc90000447a10 EFLAGS: 00010282 [ 50.505835][ T3480] RAX: 0000000000000087 RBX: ffff888039317d00 RCX: 0000000000000000 [ 50.507900][ T3480] RDX: 0000000000000000 RSI: ffffffff812716e1 RDI: 00000000ffffffff [ 50.509820][ T3480] RBP: ffffc90000447a60 R08: 0000000000000001 R09: 0000000000000000 [ 50.511735][ T3480] R10: ffffffff81d4f940 R11: 0000000000000000 R12: ffffffff834a22b0 [ 50.513494][ T3480] R13: ffffffff82c10433 R14: 0000000000000088 R15: ffffffff838a8084 [ 50.515222][ T3480] FS: 00007f3536462700(0000) GS:ffff88803eac0000(0000) knlGS:0000000000000000 [ 50.517135][ T3480] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 50.518583][ T3480] CR2: 0000000000442008 CR3: 000000003b222000 CR4: 00000000000006e0 [ 50.520723][ T3480] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 50.522709][ T3480] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 50.524450][ T3480] Call Trace: [ 50.525214][ T3480] skb_put.cold+0x1b/0x1b [ 50.526171][ T3480] psample_sample_packet+0x1d3/0x340 [ 50.527307][ T3480] tcf_sample_act+0x178/0x250 [ 50.528339][ T3480] tcf_action_exec+0xb1/0x190 [ 50.529354][ T3480] mall_classify+0x67/0x90 [ 50.530332][ T3480] tcf_classify+0x72/0x160 [ 50.531286][ T3480] __dev_queue_xmit+0x3db/0xd50 [ 50.532327][ T3480] dev_queue_xmit+0x18/0x20 [ 50.533299][ T3480] packet_sendmsg+0xee7/0x2090 [ 50.534331][ T3480] sock_sendmsg+0x54/0x70 [ 50.535271][ T3480] __sys_sendto+0x148/0x1f0 [ 50.536252][ T3480] ? tomoyo_file_ioctl+0x23/0x30 [ 50.537334][ T3480] ? ksys_ioctl+0x5e/0xb0 [ 50.540068][ T3480] __x64_sys_sendto+0x2a/0x30 [ 50.542810][ T3480] do_syscall_64+0x73/0x1f0 [ 50.545383][ T3480] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 50.548477][ T3480] RIP: 0033:0x7f35357d6fb3 [ 50.551020][ T3480] Code: 48 8b 0d 18 90 20 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d f9 d3 20 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 eb f6 ff ff 48 89 04 24 [ 50.558547][ T3480] RSP: 002b:00007ffe0c7212c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 50.561870][ T3480] RAX: ffffffffffffffda RBX: 0000000001dac010 RCX: 00007f35357d6fb3 [ 50.565142][ T3480] RDX: 0000000000000082 RSI: 0000000001dac2a2 RDI: 0000000000000003 [ 50.568469][ T3480] RBP: 00007ffe0c7212f0 R08: 00007ffe0c7212d0 R09: 0000000000000014 [ 50.571731][ T3480] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000082 [ 50.574961][ T3480] R13: 0000000001dac2a2 R14: 0000000000000001 R15: 0000000000000003 [ 50.578170][ T3480] Modules linked in: sch_ingress virtio_net [ 50.580976][ T3480] ---[ end trace 61a515626a595af6 ]--- CC: Yotam Gigi <yotamg@mellanox.com> CC: Jiri Pirko <jiri@mellanox.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> CC: Simon Horman <simon.horman@netronome.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> Fixes: 6ae0a62 ("net: Introduce psample, a new genetlink channel for packet sampling") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
paralin
pushed a commit
to paralin/linux
that referenced
this pull request
Mar 11, 2022
commit 8b59b0a upstream. arm32 uses software to simulate the instruction replaced by kprobe. some instructions may be simulated by constructing assembly functions. therefore, before executing instruction simulation, it is necessary to construct assembly function execution environment in C language through binding registers. after kasan is enabled, the register binding relationship will be destroyed, resulting in instruction simulation errors and causing kernel panic. the kprobe emulate instruction function is distributed in three files: actions-common.c actions-arm.c actions-thumb.c, so disable KASAN when compiling these files. for example, use kprobe insert on cap_capable+20 after kasan enabled, the cap_capable assembly code is as follows: <cap_capable>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e1a05000 mov r5, r0 e280006c add r0, r0, hardkernel#108 ; 0x6c e1a04001 mov r4, r1 e1a06002 mov r6, r2 e59fa090 ldr sl, [pc, hardkernel#144] ; ebfc7bf8 bl c03aa4b4 <__asan_load4> e595706c ldr r7, [r5, hardkernel#108] ; 0x6c e2859014 add r9, r5, hardkernel#20 ...... The emulate_ldr assembly code after enabling kasan is as follows: c06f1384 <emulate_ldr>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e282803c add r8, r2, hardkernel#60 ; 0x3c e1a05000 mov r5, r0 e7e37855 ubfx r7, r5, hardkernel#16, hardkernel#4 e1a00008 mov r0, r8 e1a09001 mov r9, r1 e1a04002 mov r4, r2 ebf35462 bl c03c6530 <__asan_load4> e357000f cmp r7, hardkernel#15 e7e36655 ubfx r6, r5, hardkernel#12, hardkernel#4 e205a00f and sl, r5, hardkernel#15 0a000001 beq c06f13bc <emulate_ldr+0x38> e0840107 add r0, r4, r7, lsl hardkernel#2 ebf3545c bl c03c6530 <__asan_load4> e084010a add r0, r4, sl, lsl hardkernel#2 ebf3545a bl c03c6530 <__asan_load4> e2890010 add r0, r9, hardkernel#16 ebf35458 bl c03c6530 <__asan_load4> e5990010 ldr r0, [r9, hardkernel#16] e12fff30 blx r0 e356000f cm r6, hardkernel#15 1a000014 bne c06f1430 <emulate_ldr+0xac> e1a06000 mov r6, r0 e2840040 add r0, r4, hardkernel#64 ; 0x40 ...... when running in emulate_ldr to simulate the ldr instruction, panic occurred, and the log is as follows: Unable to handle kernel NULL pointer dereference at virtual address 00000090 pgd = ecb46400 [00000090] *pgd=2e0fa003, *pmd=00000000 Internal error: Oops: 206 [hardkernel#1] SMP ARM PC is at cap_capable+0x14/0xb0 LR is at emulate_ldr+0x50/0xc0 psr: 600d0293 sp : ecd63af8 ip : 00000004 fp : c0a7c30c r10: 00000000 r9 : c30897f4 r8 : ecd63cd4 r7 : 0000000f r6 : 0000000a r5 : e59fa090 r4 : ecd63c98 r3 : c06ae294 r2 : 00000000 r1 : b7611300 r0 : bf4ec008 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 32c5387d Table: 2d546400 DAC: 55555555 Process bash (pid: 1643, stack limit = 0xecd60190) (cap_capable) from (kprobe_handler+0x218/0x340) (kprobe_handler) from (kprobe_trap_handler+0x24/0x48) (kprobe_trap_handler) from (do_undefinstr+0x13c/0x364) (do_undefinstr) from (__und_svc_finish+0x0/0x30) (__und_svc_finish) from (cap_capable+0x18/0xb0) (cap_capable) from (cap_vm_enough_memory+0x38/0x48) (cap_vm_enough_memory) from (security_vm_enough_memory_mm+0x48/0x6c) (security_vm_enough_memory_mm) from (copy_process.constprop.5+0x16b4/0x25c8) (copy_process.constprop.5) from (_do_fork+0xe8/0x55c) (_do_fork) from (SyS_clone+0x1c/0x24) (SyS_clone) from (__sys_trace_return+0x0/0x10) Code: 0050a0e1 6c0080e2 0140a0e1 0260a0e1 (f801f0e7) Fixes: 35aa1df ("ARM kprobes: instruction single-stepping support") Fixes: 4210157 ("ARM: 9017/2: Enable KASan for ARM") Signed-off-by: huangshaobo <huangshaobo6@huawei.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.