* tlsutil: Fix check TLS configuration
* Rewording docs.
* Update website/content/docs/services/configuration/checks-configuration-reference.mdx
Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com>
* Fix typos and add changelog entry.
---------

Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com>

… APIs (#17937)

* Update v1_16_x.mdx
* Update connect native golang page

---------

Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com>

This reverts commit 3368f14.

This fixes a bug that was identified which resulted in subsequent
ConnectCA configuration update not to persist in the cluster.

* Fix streaming backend link
* Update health.mdx

…enable_debug (#17565)

* # This is a combination of 9 commits.
# This is the 1st commit message:

init without tests

# This is the commit message #2:

change log

# This is the commit message #3:

fix tests

# This is the commit message #4:

fix tests

# This is the commit message #5:

added tests

# This is the commit message #6:

change log breaking change

# This is the commit message #7:

removed breaking change

# This is the commit message #8:

fix test

# This is the commit message #9:

keeping the test behaviour same

* # This is a combination of 12 commits.
# This is the 1st commit message:

init without tests

# This is the commit message #2:

change log

# This is the commit message #3:

fix tests

# This is the commit message #4:

fix tests

# This is the commit message #5:

added tests

# This is the commit message #6:

change log breaking change

# This is the commit message #7:

removed breaking change

# This is the commit message #8:

fix test

# This is the commit message #9:

keeping the test behaviour same

# This is the commit message #10:

made enable debug atomic bool

# This is the commit message #11:

fix lint

# This is the commit message #12:

fix test true enable debug

* parent 10f500e
author absolutelightning <ashesh.vidyut@hashicorp.com> 1687352587 +0530
committer absolutelightning <ashesh.vidyut@hashicorp.com> 1687352592 +0530

init without tests

change log

fix tests

fix tests

added tests

change log breaking change

removed breaking change

fix test

keeping the test behaviour same

made enable debug atomic bool

fix lint

fix test true enable debug

using enable debug in agent as atomic bool

test fixes

fix tests

fix tests

added update on correct locaiton

fix tests

fix reloadable config enable debug

fix tests

fix init and acl 403

* revert commit

* fix formatting codeblocks

* remove unnecessary indents

* update doc

* update link

* configuration entry syntax

* Example config

servcies => services

* Expose JWKS cluster config through JWTProviderConfigEntry

* fix typos, rename trustedCa to trustedCA

This PR fixes a bug that was introduced in:
#16021

A user setting a protocol in proxy-defaults would cause tproxy implicit
upstreams to not honor the upstream service's protocol set in its
`ServiceDefaults.Protocol` field, and would instead always use the
proxy-defaults value.

Due to the fact that upstreams configured with "tcp" can successfully contact
upstream "http" services, this issue was not recognized until recently (a
proxy-defaults with "tcp" and a listening service with "http" would make
successful requests, but not the opposite).

As a temporary work-around, users experiencing this issue can explicitly set
the protocol on the `ServiceDefaults.UpstreamConfig.Overrides`, which should
take precedence.

The fix in this PR removes the proxy-defaults protocol from the wildcard
upstream that tproxy uses to configure implicit upstreams. When the protocol
was included, it would always overwrite the value during discovery chain
compilation, which was not correct. The discovery chain compiler also consumes
proxy defaults to determine the protocol, so simply excluding it from the
wildcard upstream config map resolves the issue.

…17939)

* feat: update operator usage api endpoint to include nodes count

* feat: update operator usange cli command to includes nodes count

* fix(cli): remove failing check from 'connect envoy' registration for api gateway

* test(integration): add tests to check catalog statsus of gateways on startup

* remove extra sleep comment

* Update test/integration/consul-container/libs/assert/service.go

* changelog

* docs: fix removed service-to-service peering links

* docs: extend peering-via-mesh-gateways intro (thanks @trujillo-adam)

---------

Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com>

* Warning updates

* .x

* updated typo in tab heading

* updated tab group typo, too

Static DNS lookups, in addition to explicitly targeting a datacenter,
can target a cluster peer. This was added in 95dc0c7 but didn't make the documentation.

The driving function for the change is `parseLocality` here: https://github.com/hashicorp/consul/blob/0b1299c28d8127129d61310ee4280055298438e0/agent/dns_oss.go#L25

The biggest change in this is to adjust the standard lookup syntax to tie
`.<datacenter>` to `.dc` as required-together, and to append in the similar `.<cluster-peer>.peer` optional argument, both to A record and SRV record lookups.

Co-authored-by: David Yu <dyu@hashicorp.com>

…#18032)

* Docs for hashicorp/consul-k8s#2293
* remove versions for enterprise features since they are old

---------

Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com>

* docs - add jobs use case for service mesh k8s
* add code blocks

* fix(connect): set initial_fetch_time to wait indefinitely

* changelog

* PR feedback 1

* Fix metrics docs

* Add changelog

Signed-off-by: josh <josh.timmons@hashicorp.com>

---------

Signed-off-by: josh <josh.timmons@hashicorp.com>

* Update route-to-virtual-services.mdx
* Update establish-peering.mdx

grammar change

…18075)

* Update proxy lifecycle annotations and consul-dataplane flags

* Docs for dataplane upgrade on k8s

---------

Co-authored-by: David Yu <dyu@hashicorp.com>
Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com>

* update UINodes and UINodeInfo response with consul-version info added as NodeMeta, fetched from serf members

* update test cases TestUINodes, TestUINodeInfo

* added nil check for map

* add consul-version in local agent node metadata

* get consul version from serf member and add this as node meta in catalog register request

* updated ui mock response to include consul versions as node meta

* updated ui trans and added version as query param to node list route

* updates in ui templates to display consul version with filter and sorts

* updates in ui - model class, serializers,comparators,predicates for consul version feature

* added change log for Consul Version Feature

* updated to get version from consul service, if for some reason not available from serf

* updated changelog text

* updated dependent testcases

* multiselection version filter

* Update agent/consul/state/catalog.go

comments updated

Co-authored-by: Jared Kirschner <85913323+jkirschner-hashicorp@users.noreply.github.com>

---------

Co-authored-by: Jared Kirschner <85913323+jkirschner-hashicorp@users.noreply.github.com>

* api gw 1.16 updates

* Apply suggestions from code review

Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com>

* update CodeBlockConfig filename

* Apply suggestions from code review

Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com>
Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com>

* remove non-standard intentions page

* Update website/content/docs/api-gateway/configuration/index.mdx

Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com>

---------

Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com>
Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com>

* ci: build s390x

* ci: test s390x

* ci: dev build s390x

* no GOOS

* ent only

* build: publish s390x

* fix syntax error

* fix syntax error again

* fix syntax error again x2

* test branch

* Move s390x conditionals to step level

* remove test branch

---------

Co-authored-by: emilymianeil <eneil@hashicorp.com>

Just a typo in the docs.

…eams (#17991)

Configuration that previously was inlined into the Upstreams resource
applies to both explicit and implicit upstreams and so it makes sense to
split it out into its own resource.

It also has other minor changes:
- Renames `proxy.proto` proxy_configuration.proto`
- Changes the type of `Upstream.destination_ref` from `pbresource.ID` to
`pbresource.Reference`
- Adds comments to fields that didn't have them

… dependency bugs with go 1.20.6. Pin go to 1.20.5. (#18124)

### Description
The following jobs started failing when go 1.20.6 was released:
- `go-test-api-1-19`
- `go-test-api-1-20`
- `compatibility-integration-tests`
- `upgrade-integration-tests`

`compatibility-integration-tests` and `compatibility-integration-tests`
to this testcontainers issue:
testcontainers/testcontainers-go#1359. This
issue calls for testcontainers to release a new version when one of
their dependencies is fixed. When that is done, we will unpin the go
versions in `compatibility-integration-tests` and
`compatibility-integration-tests`.

### Testing & Reproduction steps

See these jobs broken in CI and then see them work with this PR.

---------

Co-authored-by: Chris Thain <32781396+cthain@users.noreply.github.com>

### Description

This adds notices, that ingress gateway is deprecated, to several places
in the product docs where ingress gateway is the topic.

### Testing & Reproduction steps

Tested with a local copy of the website.

### Links

Deprecation of ingress gateway was announced in the Release Notes for
Consul 1.16 and Consul-K8s 1.2. See:

[https://developer.hashicorp.com/consul/docs/release-notes/consul/v1_16_x#what-s-deprecated](https://developer.hashicorp.com/consul/docs/release-notes/consul/v1_16_x#what-s-deprecated
)

[https://developer.hashicorp.com/consul/docs/release-notes/consul-k8s/v1_2_x#what-s-deprecated](https://developer.hashicorp.com/consul/docs/release-notes/consul-k8s/v1_2_x#what-s-deprecated)

### PR Checklist

* [N/A] updated test coverage
* [X] external facing docs updated
* [X] appropriate backport labels added
* [X] not a security concern

---------

Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com>

### Description

<!-- Please describe why you're making this change, in plain English.
-->

- Add jwt-provider docs for jwks cluster configuration. The
configuration was added here:
#17978

### Description

<!-- Please describe why you're making this change, in plain English.
-->
Dan had already started on this
[task](#17849) which is needed
to start building the HTTP APIs. This just needed some cleanup to get it
ready for review.

Overview:

- Rename `internalResourceServiceClient` to
`insecureResourceServiceClient` for name consistency
- Configure a `secureResourceServiceClient` with auth enabled

### PR Checklist

* [ ] ~updated test coverage~
* [ ] ~external facing docs updated~
* [x] appropriate backport labels added
* [ ] ~not a security concern~

Updating RootPKIPath but not IntermediatePKIPath would not update 
leaf signing certs with the new root. Unsure if this happens in practice 
but manual testing showed it is a bug that would break mesh and agent 
connections once the old root is pruned.

… contains socked now error (#18129)

### Description

This is related to #18124 where
we pinned the go versions in CI to 1.20.5 and 1.19.10.

go 1.20.6 and 1.19.11 now validate request host headers for validity,
including the hostname cannot be prefixed with slashes.

For local communications (npipe://, unix://), the hostname is not used,
but we need valid and meaningful hostname. Prior versions go Go would
clean the host header, and strip slashes in the process, but go1.20.6
and go1.19.11 no longer do, and reject the host header. Around the
community we are seeing that others are intercepting the req.host and if
it starts with a slash or ends with .sock, they changing the host to
localhost or another dummy value.

[client: define a "dummy" hostname to use for local connections by
thaJeztah · Pull Request #45942 ·
moby/moby](moby/moby#45942)

### Testing & Reproduction steps

Check CI tests.

### Links
* [ ] updated test coverage
* [ ] external facing docs updated
* [ ] appropriate backport labels added
* [ ] not a security concern

…t is valid (#18139)

### Description

This is to correct a code problem because this assumes all segments, but
when you get to Enterprise, you can be in partition that is not the
default partition, in which case specifying all segments does not
validate and fails. This is to correct the setting of this filter with
`AllSegments` to `true` to only occur when in the the `default`
partition.

### Testing & Reproduction steps

<!--

* In the case of bugs, describe how to replicate
* If any manual tests were done, document the steps and the conditions
to replicate
* Call out any important/ relevant unit tests, e2e tests or integration
tests you have added or are adding

-->

### Links

<!--

Include any links here that might be helpful for people reviewing your
PR (Tickets, GH issues, API docs, external benchmarks, tools docs, etc).
If there are none, feel free to delete this section.

Please be mindful not to leak any customer or confidential information.
HashiCorp employees may want to use our internal URL shortener to
obfuscate links.

-->

### PR Checklist

* [ ] updated test coverage
* [ ] external facing docs updated
* [ ] appropriate backport labels added
* [ ] not a security concern

### Description

<!-- Please describe why you're making this change, in plain English.
-->
The mock is used in `http_ent_test` file which caused lint failures. For
OSS->ENT parity adding the same change here.

### Links

<!--

Include any links here that might be helpful for people reviewing your
PR (Tickets, GH issues, API docs, external benchmarks, tools docs, etc).
If there are none, feel free to delete this section.

Please be mindful not to leak any customer or confidential information.
HashiCorp employees may want to use our internal URL shortener to
obfuscate links.

-->

Identified in OSS->ENT [merge
PR](hashicorp/consul-enterprise#6328)

### PR Checklist

* [ ] ~updated test coverage~
* [ ] ~external facing docs updated~
* [x] appropriate backport labels added
* [ ] ~not a security concern~

…lter (#18062)

### Description

<!-- Please describe why you're making this change, in plain English.
-->

- Currently the jwt-auth filter doesn't take into account the service
identity when validating jwt-auth, it only takes into account the path
and jwt provider during validation. This causes issues when multiple
source intentions restrict access to an endpoint with different JWT
providers.
- To fix these issues, rather than use the JWT auth filter for
validation, we use it in metadata mode and allow it to forward the
successful validated JWT token payload to the RBAC filter which will
make the decisions.

This PR ensures requests with and without JWT tokens successfully go
through the jwt-authn filter. The filter however only forwards the data
for successful/valid tokens. On the RBAC filter level, we check the
payload for claims and token issuer + existing rbac rules.

### Testing & Reproduction steps

<!--

* In the case of bugs, describe how to replicate
* If any manual tests were done, document the steps and the conditions
to replicate
* Call out any important/ relevant unit tests, e2e tests or integration
tests you have added or are adding

-->

- This test covers a multi level jwt requirements (requirements at top
level and permissions level). It also assumes you have envoy running,
you have a redis and a sidecar proxy service registered, and have a way
to generate jwks with jwt. I mostly use:
https://www.scottbrady91.com/tools/jwt for this.

- first write your proxy defaults
```
Kind = "proxy-defaults"
name = "global"
config {
  protocol = "http"
}
```
- Create two providers 
```
Kind = "jwt-provider"
Name = "auth0"
Issuer = "https://ronald.local"

JSONWebKeySet = {
    Local = {
     JWKS = "eyJrZXlzIjog....."
    }
}
```

```
Kind = "jwt-provider"
Name = "okta"
Issuer = "https://ronald.local"

JSONWebKeySet = {
   Local = {
     JWKS = "eyJrZXlzIjogW3...."
    }
}
```

- add a service intention
```
Kind = "service-intentions"
Name = "redis"

JWT = {
  Providers = [
    {
      Name = "okta"
    },
  ]
}

Sources = [
  {
    Name = "*"
    Permissions = [{
      Action = "allow"
      HTTP = {
        PathPrefix = "/workspace"
      }
      JWT = {
        Providers = [
          {
            Name = "okta"
            VerifyClaims = [
              {
                  Path = ["aud"]
                  Value = "my_client_app"
              },
              {
                Path = ["sub"]
                Value = "5be86359073c434bad2da3932222dabe"
              }
            ]
          },
        ]
      }

    },
    {
      Action = "allow"
      HTTP = {
        PathPrefix = "/"
      }
      JWT = {
        Providers = [
          {
            Name = "auth0"
          },
        ]
      }

    }]
  }
]
```
- generate 3 jwt tokens: 1 from auth0 jwks, 1 from okta jwks with
different claims than `/workspace` expects and 1 with correct claims
- connect to your envoy (change service and address as needed) to view
logs and potential errors. You can add: `-- --log-level debug` to see
what data is being forwarded
```
consul connect envoy -sidecar-for redis1 -grpc-addr 127.0.0.1:8502
```
- Make the following requests: 
```
curl -s -H "Authorization: Bearer $Auth0_TOKEN" --insecure --cert leaf.cert --key leaf.key --cacert connect-ca.pem https://localhost:20000/workspace -v

RBAC filter denied

curl -s -H "Authorization: Bearer $Okta_TOKEN_with_wrong_claims" --insecure --cert leaf.cert --key leaf.key --cacert connect-ca.pem https://localhost:20000/workspace -v

RBAC filter denied

curl -s -H "Authorization: Bearer $Okta_TOKEN_with_correct_claims" --insecure --cert leaf.cert --key leaf.key --cacert connect-ca.pem https://localhost:20000/workspace -v

Successful request
```


### TODO

* [x] Update test coverage
* [ ] update integration tests (follow-up PR)
* [x] appropriate backport labels added

### Description

Add support for consul connect envoy command on windows. This PR fixes
the comments of PR - #15114

### Testing
* Built consul.exe from this branch on windows and hosted here - [AWS
S3](https://asheshvidyut-bucket.s3.ap-southeast-2.amazonaws.com/consul.zip)
* Updated the
[tutorial](https://developer.hashicorp.com/consul/tutorials/developer-mesh/consul-windows-workloads)
and changed the `consul_url.default` value to [AWS
S3](https://asheshvidyut-bucket.s3.ap-southeast-2.amazonaws.com/consul.zip)
* Followed the steps in the tutorial and verified that everything is
working as described.

### PR Checklist

* [x] updated test coverage
* [ ] external facing docs updated
* [x] appropriate backport labels added
* [x] not a security concern

---------

Co-authored-by: Franco Bruno Lavayen <cocolavayen@gmail.com>
Co-authored-by: Jose Ignacio Lorenzo <74208929+joselo85@users.noreply.github.com>
Co-authored-by: Jose Ignacio Lorenzo <joseignaciolorenzo85@gmail.com>
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>

### Description

Addresses
#17171 (comment)

test: improve xDS listener code coverage

… tests (#18157)

Re-order expected/actual, consul container tests

* group and document make file

Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
Co-authored-by: R.B. Boyer <rb@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>

* Add FIPS reference to consul enterprise docs

* Update website/content/docs/enterprise/index.mdx

Co-authored-by: David Yu <dyu@hashicorp.com>

* remove support for ecs client (fips)

---------

Co-authored-by: David Yu <dyu@hashicorp.com>

Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
Co-authored-by: R.B. Boyer <rb@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
Co-authored-by: NiniOak <anita.akaeze@hashicorp.com>

* Update index.mdx
* Update kv.mdx
* Update docs-nav-data.json
* delete sentinel.mdx
* Update redirects.js

---------

Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com>

Bump golang.org/x/net to 0.12.0

While not necessary to directly address CVE-2023-29406 (which should be
handled by using a patched version of Go when building), an
accompanying change to HTTP/2 error handling does impact agent code.

See https://go-review.googlesource.com/c/net/+/506995 for the HTTP/2
change.

Bump this dependency across our submodules as well for the sake of
potential indirect consumers of `x/net/http`.

Update Go version to 1.20.6

This resolves [CVE-2023-29406]
(https://nvd.nist.gov/vuln/detail/CVE-2023-29406) for uses of the
`net/http` standard library.

Note that until the follow-up to #18124 is done, the version of Go used
in those impacted tests will need to remain on 1.20.5.

* Improve XDS test coverage: JWT auth edition

more tests

* test: xds coverage for jwt listeners

---------

Co-authored-by: DanStough <dan.stough@hashicorp.com>

u[date readme.md

Align all our internal use of submodules on the latest versions.

Result of tsccr-helper -log-level=info -pin-all-workflows .

Co-authored-by: hashicorp-tsccr[bot] <hashicorp-tsccr[bot]@users.noreply.github.com>

* Fix Backport Assistant failure PR commenting

For general comments on a PR, it looks like you have to use the `/issue`
endpoint rather than `/pulls`, which requires commit/other
review-specific target details.

This matches the endpoint used in `backport-reminder.yml`.

* Remove Backport Reminder workflow

This is noisy (even when adding multiple labels, individual comments per
label are generated), and likely no longer needed: we haven't had this
work in a long time due to an expired GH token, and we now have better
automation for backport PR assignment.

… [NET-4908] (#18192)

This PR explicitly enables WebSocket upgrades in Envoy's UpgradeConfig for all
proxy types. (API Gateway, Ingress, and Sidecar.)

Fixes #8283

test: improve xDS cluster code coverage

Net 4222 take config file consul container

* [CONSUL-395] Update check_hostport and Usage (#40)

* [CONSUL-397] Copy envoy binary from Image (#41)

* [CONSUL-382] Support openssl in unique test dockerfile (#43)

* [CONSUL-405] Add bats to single container (#44)

* [CONSUL-414] Run Prometheus Test Cases and Validate Changes (#46)

* [CONSUL-410] Run Jaeger in Single container (#45)

* [CONSUL-412] Run test-sds-server in single container (#48)

* [CONSUL-408] Clean containers (#47)

* [CONSUL-384] Rebase and sync fork (#50)

* [CONSUL-415] Create Scenarios Troubleshooting Docs (#49)

* [CONSUL-417] Update Docs Single Container (#51)

* [CONSUL-428] Add Socat to single container (#54)

* [CONSUL-424] Replace pkill in kill_envoy function (#52)

* [CONSUL-434] Modify Docker run functions in Helper script (#53)

* [CONSUL-435] Replace docker run in set_ttl_check_state & wait_for_agent_service_register functions (#55)

* [CONSUL-438] Add netcat (nc) in the Single container Dockerfile (#56)

* [CONSUL-429] Replace Docker run with Docker exec (#57)

* [CONSUL-436] Curl timeout and run tests (#58)

* [CONSUL-443] Create dogstatsd Function (#59)

* [CONSUL-431] Update Docs Netcat (#60)

* [CONSUL-439] Parse nc Command in function (#61)

* [CONSUL-463] Review curl Exec and get_ca_root Func (#63)

* [CONSUL-453] Docker hostname in Helper functions (#64)

* [CONSUL-461] Test wipe volumes without extra cont (#66)

* [CONSUL-454] Check ports in the Server and Agent containers (#65)

* [CONSUL-441] Update windows dockerfile with version (#62)

* [CONSUL-466] Review case-grpc Failing Test (#67)

* [CONSUL-494] Review case-cfg-resolver-svc-failover (#68)

* [CONSUL-496] Replace docker_wget & docker_curl (#69)

* [CONSUL-499] Cleanup Scripts - Remove nanoserver (#70)

* [CONSUL-500] Update Troubleshooting Docs (#72)

* [CONSUL-502] Pull & Tag Envoy Windows Image (#73)

* [CONSUL-504] Replace docker run in docker_consul (#76)

* [CONSUL-505] Change admin_bind

* [CONSUL-399] Update envoy to 1.23.1 (#78)

* [CONSUL-510] Support case-wanfed-gw on Windows (#79)

* [CONSUL-506] Update troubleshooting Documentation (#80)

* [CONSUL-512] Review debug_dump_volumes Function (#81)

* [CONSUL-514] Add zipkin to Docker Image (#82)

* [CONSUL-515] Update Documentation (#83)

* [CONSUL-529] Support case-consul-exec (#86)

* [CONSUL-530] Update Documentation (#87)

* [CONSUL-530] Update default consul version 1.13.3

* [CONSUL-539] Cleanup (#91)

* [CONSUL-546] Scripts Clean-up (#92)

* [CONSUL-491] Support admin_access_log_path value for Windows (#71)

* [CONSUL-519] Implement mkfifo Alternative (#84)

* [CONSUL-542] Create OS Specific Files for Envoy Package (#88)

* [CONSUL-543] Create exec_supported.go (#89)

* [CONSUL-544] Test and Build Changes (#90)

* Implement os.DevNull

* using mmap instead of disk files

* fix import in exec-unix

* fix nmap open too many arguemtn

* go fmt on file

* changelog file

* fix go mod

* Update .changelog/17694.txt

Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>

* different mmap library

* fix bootstrap json

* some fixes

* chocolatey version fix and image fix

* using different library

* fix Map funciton call

* fix mmap call

* fix tcp dump

* fix tcp dump

* windows tcp dump

* Fix docker run

* fix tests

* fix go mod

* fix version 16.0

* fix version

* fix version dev

* sleep to debug

* fix sleep

* fix permission issue

* fix permission issue

* fix permission issue

* fix command

* fix command

* fix funciton

* fix assert config entry status command not found

* fix command not found assert_cert_has_cn

* fix command not found assert_upstream_missing

* fix command not found assert_upstream_missing_once

* fix command not found get_upstream_endpoint

* fix command not found get_envoy_public_listener_once

* fix command not found

* fix test cases

* windows integration test workflow github

* made code similar to unix using npipe

* fix go.mod

* fix dialing of npipe

* dont wait

* check size of written json

* fix undefined n

* running

* fix dep

* fix syntax error

* fix workflow file

* windows runner

* fix runner

* fix from json

* fix runs on

* merge connect envoy

* fix cin path

* build

* fix file name

* fix file name

* fix dev build

* remove unwanted code

* fix upload

* fix bin name

* fix path

* checkout current branch

* fix path

* fix tests

* fix shell bash for windows sh files

* fix permission of run-test.sh

* removed docker dev

* added shell bash for tests

* fix tag

* fix win=true

* fix cd

* added dev

* fix variable undefined

* removed failing tests

* fix tcp dump image

* fix curl

* fix curl

* tcp dump path

* fix tcpdump path

* fix curl

* fix curl install

* stop removing intermediate containers

* fix tcpdump docker image

* revert -rm

* --rm=false

* makeing docker image before

* fix tcpdump

* removed case consul exec

* removed terminating gateway simple

* comment case wasm

* removed data dog

* comment out upload coverage

* uncomment case-consul-exec

* comment case consul exec

* if always

* logs

* using consul 1.17.0

* fix quotes

* revert quotes

* redirect to dev null

* Revert version

* revert consul connect

* fix version

* removed envoy connect

* not using function

* change log

* docker logs

* fix logs

* restructure bad authz

* rmeoved dev null

* output

* fix file descriptor

* fix cacert

* fix cacert

* fix ca cert

* cacert does not work in windows curl

* fix func

* removed docker logs

* added sleep

* fix tls

* commented case-consul-exec

* removed echo

* retry docker consul

* fix upload bin

* uncomment consul exec

* copying consul.exe to docker image

* copy fix

* fix paths

* fix path

* github workspace path

* latest version

* Revert "latest version"

This reverts commit 5a7d7b8.

* commented consul exec

* added ssl revoke best effort

* revert best effort

* removed unused files

* rename var name and change dir

* windows runner

* permission

* needs setup fix

* swtich to github runner

* fix file path

* fix path

* fix path

* fix path

* fix path

* fix path

* fix build paths

* fix tag

* nightly runs

* added matrix in github workflow, renamed files

* fix job

* fix matrix

* removed brackes

* from json

* without using job matrix

* fix quotes

* revert job matrix

* fix workflow

* fix comment

* added comment

* nightly runs

* removed datadog ci as it is already measured in linux one

* running test

* Revert "running test"

This reverts commit 7013d15.

* pr comment fixes

* running test now

* running subset of test

* running subset of test

* job matrix

* shell bash

* removed bash shell

* linux machine for job matrix

* fix output

* added cat to debug

* using ubuntu latest

* fix job matrix

* fix win true

* fix go test

* revert job matrix

---------

Co-authored-by: Jose Ignacio Lorenzo <74208929+joselo85@users.noreply.github.com>
Co-authored-by: Franco Bruno Lavayen <cocolavayen@gmail.com>
Co-authored-by: Ivan K Berlot <ivanberlot@gmail.com>
Co-authored-by: Ezequiel Fernández Ponce <20102608+ezfepo@users.noreply.github.com>
Co-authored-by: joselo85 <joseignaciolorenzo85@gmail.com>
Co-authored-by: Ezequiel Fernández Ponce <ezequiel.fernandez@southworks.com>
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>

* fix typos and update ecs compat table

* real info for the ecs compat matrix table

* Update website/content/docs/ecs/compatibility.mdx

Co-authored-by: Chris Thain <32781396+cthain@users.noreply.github.com>

---------

Co-authored-by: Chris Thain <32781396+cthain@users.noreply.github.com>

* proxystate: add proxystate protos to pbmesh and resolve imports and conflicts between message names