raise an authentication error if its unable to get keys

Hologram/HologramCloud.py

@@ -14,7 +14,7 @@
 from Hologram.CustomCloud import CustomCloud
 from HologramAuth import TOTPAuthentication, SIMOTPAuthentication
 from Hologram.Authentication import CSRPSKAuthentication
-from Exceptions.HologramError import HologramError
+from Exceptions.HologramError import HologramError, AuthenticationError
 
 DEFAULT_SEND_MESSAGE_TIMEOUT = 5
 HOLOGRAM_HOST_SEND = 'cloudsocket.hologram.io'
@@ -125,6 +125,7 @@ def __populate_totp_credentials(self):
             self.authentication.credentials['private_key'] = self.network.imsi
         except Exception as e:
             self.logger.error('Unable to fetch device id or private key')
+            raise AuthenticationError('Unable to fetch device id or private key for TOTP authenication')
 
     def __populate_sim_otp_credentials(self):
         nonce = self.request_hex_nonce()

Hologram/Network/Modem/BG96.py

@@ -7,183 +7,17 @@
 #
 # LICENSE: Distributed under the terms of the MIT License
 #
-import binascii
-import time
 
-from serial.serialutil import Timeout
-
-from Hologram.Network.Modem import Modem
-from Hologram.Event import Event
+from Hologram.Network.Modem.Quectel import Quectel
 from UtilClasses import ModemResult
-from Exceptions.HologramError import SerialError, NetworkError
 
 DEFAULT_BG96_TIMEOUT = 200
 
-class BG96(Modem):
+class BG96(Quectel):
     usb_ids = [('2c7c', '0296')]
-
-    def __init__(self, device_name=None, baud_rate='9600',
-                 chatscript_file=None, event=Event()):
-
-        super().__init__(device_name=device_name, baud_rate=baud_rate,
-                                        chatscript_file=chatscript_file, event=event)
-        self._at_sockets_available = True
-        self.urc_response = ''
-
+
     def connect(self, timeout=DEFAULT_BG96_TIMEOUT):
-
-        success = super().connect(timeout)
-
-        # put serial mode on other port
-        # if success is True:
-        #     # detect another open serial port to use for PPP
-        #     devices = self.detect_usable_serial_port()
-        #     if not devices:
-        #         raise SerialError('Not enough serial ports detected for Nova')
-        #     self.logger.debug('Moving connection to port %s', devices[0])
-        #     self.device_name = devices[0]
-        #     super().initialize_serial_interface()
-
-        return success
-
-    def send_message(self, data, timeout=Modem.DEFAULT_SEND_TIMEOUT):
-        # Waiting for the open socket urc
-        while self.urc_state != Modem.SOCKET_WRITE_STATE:
-            self.checkURC()
-
-        self.write_socket(data)
-
-        loop_timeout = Timeout(timeout)
-        while self.urc_state != Modem.SOCKET_SEND_READ:
-            self.checkURC()
-            if self.urc_state != Modem.SOCKET_SEND_READ:
-                if loop_timeout.expired():
-                    raise SerialError('Timeout occurred waiting for message status')
-                time.sleep(self._RETRY_DELAY)
-            elif self.urc_state == Modem.SOCKET_CLOSED:
-                return '[1,0]' #this is connection closed for hologram cloud response
-
-        return self.urc_response
-
-    def create_socket(self):
-        self._set_up_pdp_context()
-
-    def connect_socket(self, host, port):
-        self.command('+QIOPEN', '1,0,\"TCP\",\"%s\",%d,0,1' % (host, port))
-        # According to the BG96 Docs
-        # Have to wait for URC response “+QIOPEN: <connectID>,<err>”
-
-    def close_socket(self, socket_identifier=None):
-        ok, _ = self.command('+QICLOSE', self.socket_identifier)
-        if ok != ModemResult.OK:
-            self.logger.error('Failed to close socket')
-        self.urc_state = Modem.SOCKET_CLOSED
-        self._tear_down_pdp_context()
-
-    def write_socket(self, data):
-        hexdata = binascii.hexlify(data)
-        # We have to do it in chunks of 510 since 512 is actually too long (CMEE error)
-        # and we need 2n chars for hexified data
-        for chunk in self._chunks(hexdata, 510):
-            value = '%d,\"%s\"' % (self.socket_identifier, chunk.decode())
-            ok, _ = self.set('+QISENDEX', value, timeout=10)
-            if ok != ModemResult.OK:
-                self.logger.error('Failed to write to socket')
-                raise NetworkError('Failed to write to socket')
-
-    def read_socket(self, socket_identifier=None, payload_length=None):
-
-        if socket_identifier is None:
-            socket_identifier = self.socket_identifier
-
-        if payload_length is None:
-            payload_length = self.last_read_payload_length
-
-        ok, resp = self.set('+QIRD', '%d,%d' % (socket_identifier, payload_length))
-        if ok == ModemResult.OK:
-            resp = resp.lstrip('+QIRD: ')
-            if resp is not None:
-                resp = resp.strip('"')
-            try:
-                resp = resp.decode()
-            except:
-                # This is some sort of binary data that can't be decoded so just
-                # return the bytes. We might want to make this happen via parameter
-                # in the future so it is more deterministic
-                self.logger.debug('Could not decode recieved data')
-
-            return resp
-
-    def is_registered(self):
-        return self.check_registered('+CREG') or self.check_registered('+CGREG')
-
-    # EFFECTS: Handles URC related AT command responses.
-    def handleURC(self, urc):
-        if urc.startswith('+QIOPEN: '):
-            response_list = urc.lstrip('+QIOPEN: ').split(',')
-            socket_identifier = int(response_list[0])
-            err = int(response_list[-1])
-            if err == 0:
-                self.urc_state = Modem.SOCKET_WRITE_STATE
-                self.socket_identifier = socket_identifier
-            else:
-                self.logger.error('Failed to open socket')
-                raise NetworkError('Failed to open socket')
-            return
-        if urc.startswith('+QIURC: '):
-            response_list = urc.lstrip('+QIURC: ').split(',')
-            urctype = response_list[0]
-            if urctype == '\"recv\"':
-                self.urc_state = Modem.SOCKET_SEND_READ
-                self.socket_identifier = int(response_list[1])
-                self.last_read_payload_length = int(response_list[2])
-                self.urc_response = self._readline_from_serial_port(5)
-            if urctype == '\"closed\"':
-                self.urc_state = Modem.SOCKET_CLOSED
-                self.socket_identifier = int(response_list[-1])
-            return
-        super().handleURC(urc)
-
-    def _is_pdp_context_active(self):
-        if not self.is_registered():
-            return False
-
-        ok, r = self.command('+QIACT?')
-        if ok == ModemResult.OK:
-            try:
-                pdpstatus = int(r.lstrip('+QIACT: ').split(',')[1])
-                # 1: PDP active
-                return pdpstatus == 1
-            except (IndexError, ValueError) as e:
-                self.logger.error(repr(e))
-            except AttributeError as e:
-                self.logger.error(repr(e))
-        return False
-
-    def init_serial_commands(self):
-        self.command("E0") #echo off
-        self.command("+CMEE", "2") #set verbose error codes
-        self.command("+CPIN?")
-        self.set_timezone_configs()
-        #self.command("+CPIN", "") #set SIM PIN
-        self.command("+CPMS", "\"ME\",\"ME\",\"ME\"")
-        self.set_sms_configs()
-        self.set_network_registration_status()
-
-    def set_network_registration_status(self):
-        self.command("+CREG", "2")
-        self.command("+CGREG", "2")
-
-    def _set_up_pdp_context(self):
-        if self._is_pdp_context_active(): return True
-        self.logger.info('Setting up PDP context')
-        self.set('+QICSGP', f'1,1,\"{self._apn}\",\"\",\"\",1')
-        ok, _ = self.set('+QIACT', '1', timeout=30)
-        if ok != ModemResult.OK:
-            self.logger.error('PDP Context setup failed')
-            raise NetworkError('Failed PDP context setup')
-        else:
-            self.logger.info('PDP context active')
+        return super().connect(timeout)
 
     def _tear_down_pdp_context(self):
         if not self._is_pdp_context_active(): return True

Hologram/Network/Modem/E303.py

@@ -25,15 +25,7 @@ def __init__(self, device_name=None, baud_rate='9600',
     def connect(self, timeout = DEFAULT_E303_TIMEOUT):
         return super().connect(timeout)
 
-    def init_serial_commands(self):
-        self.command("E0") #echo off
-        self.command("+CMEE", "2") #set verbose error codes
-        self.command("+CPIN?")
-        self.command("+CTZU", "1") #time/zone sync
-        self.command("+CTZR", "1") #time/zone URC
-        #self.command("+CPIN", "") #set SIM PIN
-        self.command("+CPMS", "\"ME\",\"ME\",\"ME\"")
-        self.set_sms_configs()
+    def set_network_registration_status(self):
         self.command("+CREG", "2")
         self.command("+CGREG", "2")
 

Hologram/Network/Modem/E372.py

@@ -25,15 +25,7 @@ def __init__(self, device_name=None, baud_rate='9600',
     def connect(self, timeout = DEFAULT_E372_TIMEOUT):
         return super().connect(timeout)
 
-    def init_serial_commands(self):
-        self.command("E0") #echo off
-        self.command("+CMEE", "2") #set verbose error codes
-        self.command("+CPIN?")
-        self.command("+CTZU", "1") #time/zone sync
-        self.command("+CTZR", "1") #time/zone URC
-        #self.command("+CPIN", "") #set SIM PIN
-        self.command("+CPMS", "\"ME\",\"ME\",\"ME\"")
-        self.set_sms_configs()
+    def set_network_registration_status(self):
         self.command("+CREG", "2")
         self.command("+CGREG", "2")