Add BG96 Support #37
Merged
Add BG96 Support #37
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
DomAmato
added a commit
that referenced
this pull request
Apr 30, 2021
* Add Github Actions * Update issue templates use comments to hide extra details when preparing a report * wait for the process to be terminated (#17) * Properly handle when parsing other types of SMS PDUs (#16) * Add chunking for messeages over 512 bytes (#15) * Update test_Modem.py * check python and pip versions (#19) * simplify version check * check python and pip version for update too * call super.disconnect instead of connect (ensures event network.disconnected broadcast) (#22) * remove extraneous parenthesis (#24) * include token * remove extraneous parenthesis (#26) * remove travis and rename actions * use pytest instead of coverage * only test on 3.7 for now * Allow sending raw AT commands to the modem (#28) * Fix PPP Errors with disconnect and routing (#32) Fix #30 and #31 * Concat to bytes not str (#33) * properly convert bytestring ascii value * convert from ascii int value to int * make it possible to renable at sockets (#36) * include support for Huawei Modem E372 (#21) * include support for Huawei Modem E372 and actually works with Ubuntu and Raspbian10 * add support in class for E372 modem Co-authored-by: Hector Mendez <hector.mendez@nimanic.com> * Add BG96 Support (#37) * add bg96 to modems * update description and enable at sockets * Update BG96.py * check if active * send the right permutation * decode and use command * wait for socket to open and handle other actions * better urc handling * more logging * handle attribute errors too * handle urc types better * better socket state handling * bg96 is send ok not ok * log more info * use set instead of command * add send ok as possible results * handle send ok in process response * close properly and update read_socket * handle recv response from urc * fix missing imports * clean up logging a bit * remove another logging instance * fix merge conflict * fix copy pasta * try adding config on develop * add some more github actions (#41) * add dependency label to config * Dont encode buffer (#39) * add more info to release * Bump actions/setup-python from v1 to v2.0.2 (#51) Bumps [actions/setup-python](https://github.com/actions/setup-python) from v1 to v2.0.2. - [Release notes](https://github.com/actions/setup-python/releases) - [Commits](actions/setup-python@v1...7a69c2b) Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Update psutil requirement from ~=5.6.3 to ~=5.7.2 (#50) Updates the requirements on [psutil](https://github.com/giampaolo/psutil) to permit the latest version. - [Release notes](https://github.com/giampaolo/psutil/releases) - [Changelog](https://github.com/giampaolo/psutil/blob/master/HISTORY.rst) - [Commits](giampaolo/psutil@release-5.6.3...release-5.7.2) Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Update hjson requirement from ~=3.0.0 to ~=3.0.1 (#48) Updates the requirements on [hjson](https://github.com/hjson/hjson-py) to permit the latest version. - [Release notes](https://github.com/hjson/hjson-py/releases) - [Changelog](https://github.com/hjson/hjson-py/blob/master/history.md) - [Commits](hjson/hjson-py@v3.0.0...v3.0.1) Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Update pyudev requirement from ~=0.21.0 to ~=0.22.0 (#45) Updates the requirements on [pyudev](https://github.com/pyudev/pyudev) to permit the latest version. - [Release notes](https://github.com/pyudev/pyudev/releases) - [Changelog](https://github.com/pyudev/pyudev/blob/develop-0.22/CHANGES.rst) - [Commits](pyudev/pyudev@v0.21.0...v0.22) Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Update requests requirement from ~=2.22.0 to ~=2.24.0 (#44) Updates the requirements on [requests](https://github.com/psf/requests) to permit the latest version. - [Release notes](https://github.com/psf/requests/releases) - [Changelog](https://github.com/psf/requests/blob/master/HISTORY.md) - [Commits](psf/requests@v2.22.0...v2.24.0) Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * add section for dependencies * fix broken python actions * Update psutil requirement from ~=5.7.2 to ~=5.8.0 (#70) Updates the requirements on [psutil](https://github.com/giampaolo/psutil) to permit the latest version. - [Release notes](https://github.com/giampaolo/psutil/releases) - [Changelog](https://github.com/giampaolo/psutil/blob/master/HISTORY.rst) - [Commits](giampaolo/psutil@release-5.7.2...release-5.8.0) Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Update pyusb requirement from ~=1.0.2 to ~=1.1.0 (#59) Updates the requirements on [pyusb](https://github.com/pyusb/pyusb) to permit the latest version. - [Release notes](https://github.com/pyusb/pyusb/releases) - [Commits](pyusb/pyusb@v1.0.2...v1.1.0) Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Update requests requirement from ~=2.24.0 to ~=2.25.1 (#67) Updates the requirements on [requests](https://github.com/psf/requests) to permit the latest version. - [Release notes](https://github.com/psf/requests/releases) - [Changelog](https://github.com/psf/requests/blob/master/HISTORY.md) - [Commits](psf/requests@v2.24.0...v2.25.1) Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Update pyserial requirement from ~=3.4.0 to ~=3.5 (#72) Updates the requirements on [pyserial](https://github.com/pyserial/pyserial) to permit the latest version. - [Release notes](https://github.com/pyserial/pyserial/releases) - [Changelog](https://github.com/pyserial/pyserial/blob/master/CHANGES.rst) - [Commits](pyserial/pyserial@v3.4...v3.5) Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Strip AT command result prefix when issued command ends with ? or % (#6) * Strip AT command result prefix when issued command ends with ? or % * Simplify strip of characters from AT command result * Fix type for BG96 (#77) * allow setting APN (#79) * properly handle bytes when reading from an open socket (#74) * Update pyusb requirement from ~=1.1.0 to ~=1.1.1 (#75) Updates the requirements on [pyusb](https://github.com/pyusb/pyusb) to permit the latest version. - [Release notes](https://github.com/pyusb/pyusb/releases) - [Commits](pyusb/pyusb@v1.1.0...v1.1.1) Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: akumlehn <andreas@kumlehn.de> Co-authored-by: Héctor <hector.a.mendez.l@gmail.com> Co-authored-by: Hector Mendez <hector.mendez@nimanic.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Tom Pethtel <TomPethtel@gmail.com> Co-authored-by: Reuben Balik <rbalik@users.noreply.github.com>
Open
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.