Setup pre-commit to GEF-Extras

.github/FUNDING.yml

@@ -1,4 +1,3 @@
 # These are supported funding model platforms
 
 github: [hugsy,]
-

.github/ISSUE_TEMPLATE/bug_report.md

@@ -6,20 +6,22 @@ labels: triage
 assignees: ''
 
 ---
+## Bug Report
+
 <!--Your issue will be closed unless you confirm the following (insert `x` in the
-brackets if done/agreed):-->
+brackets if done/agreed) -->
 
-* [ ] Is your bug specific to GEF (not GDB)? - Try to reproduce it running `gdb -nx`
-* [ ] Did you search through the [documentation](https://github.com/hugsy/gef/) first?
-* [ ] Did you check [issues](https://github.com/hugsy/gef/issues) (including
+*  [ ] Is your bug specific to GEF (not GDB)? - Try to reproduce it running `gdb -nx`
+*  [ ] Did you search through the [documentation](https://github.com/hugsy/gef/) first?
+*  [ ] Did you check [issues](https://github.com/hugsy/gef/issues) (including
  the closed ones) - and the [PR](https://github.com/hugsy/gef/pulls)?
 
 
 ### Step 1: Describe your environment
 
-* Operating System / Distribution:
-* Architecture:
-* GEF version (including the Python library version) run `version` in GEF.
+*  Operating System / Distribution:
+*  Architecture:
+*  GEF version (including the Python library version) run `version` in GEF.
 
 
 ### Step 2: Describe your problem
@@ -42,12 +44,12 @@ int main(){ return 0; }
 
 #### Observed Results
 
-* What happened? This could be a description, log output, etc.
+*  What happened? This could be a description, log output, etc.
 
 
 #### Expected results
 
-* What did you expect to happen?
+*  What did you expect to happen?
 
 #### Traces
 

.github/PULL_REQUEST_TEMPLATE.md

@@ -11,20 +11,22 @@
 
 "Tested" indicates that the PR works *and* the unit test (i.e. `make test`) run passes without issue.
 
- * [ ] x86-32
- * [ ] x86-64
- * [ ] ARM
- * [ ] AARCH64
- * [ ] MIPS
- * [ ] POWERPC
- * [ ] SPARC
- * [ ] RISC-V
+*  [ ] x86-32
+*  [ ] x86-64
+*  [ ] ARM
+*  [ ] AARCH64
+*  [ ] MIPS
+*  [ ] POWERPC
+*  [ ] SPARC
+*  [ ] RISC-V
 
 ## Checklist
 
 <!-- N.B.: Your patch won't be reviewed unless fulfilling the following base requirements: -->
 <!--- Put an `x` in all the boxes that are complete, or that don't apply -->
-- [ ] My code follows the code style of this project.
-- [ ] My change includes a change to the documentation, if required.
-- [ ] If my change adds new code, [adequate tests](https://hugsy.github.io/gef/testing) have been added.
-- [ ] I have read and agree to the [CONTRIBUTING](https://github.com/hugsy/gef/blob/main/.github/CONTRIBUTING.md) document.
+* [ ] My code follows the code style of this project.
+* [ ] My change includes a change to the documentation, if required.
+* [ ] If my change adds new code,
+ [adequate tests](https://hugsy.github.io/gef/testing) have been added.
+* [ ] I have read and agree to the
+ [CONTRIBUTING](https://github.com/hugsy/gef/blob/main/.github/CONTRIBUTING.md) document.

.github/stale.yml

@@ -20,6 +20,6 @@ closeComment: >
  complete description; or create a new issue.
  Thank you for your contributions.
 # Set to true to ignore issues in a milestone (defaults to false)
-exemptMilestones: true 
+exemptMilestones: true
 # Set to true to ignore issues with an assignee (defaults to false)
 exemptAssignees: true

.github/workflows/validate.yml

@@ -0,0 +1,30 @@
+name: Validation
+
+on:
+ pull_request:
+
+
+jobs:
+ pre_commit:
+ name: Check formatting
+ runs-on: ubuntu-latest
+ steps:
+ - uses: actions/checkout@v3
+ - uses: actions/setup-python@v3
+ - uses: pre-commit/action@v3.0.0
+
+ docs_link_check:
+ name: Check URLs in docs
+ runs-on: ubuntu-latest
+ permissions:
+ contents: read
+ steps:
+ - name: checkout
+ uses: actions/checkout@v2
+ - name: Check links
+ uses: lycheeverse/lychee-action@v1.4.1
+ env:
+ GITHUB_TOKEN: ${{secrets.GITHUB_TOKEN}}
+ with:
+ args: --exclude-mail --accept=401 --no-progress 'docs/**/*.md'
+ fail: false

.gitignore

@@ -91,4 +91,3 @@ ENV/
 .vscode
 .benchmarks
 .pytest_cache
-

.pre-commit-config.yaml

@@ -0,0 +1,22 @@
+fail_fast: false
+repos:
+ - repo: https://github.com/pre-commit/pre-commit-hooks
+ rev: v4.4.0
+ hooks:
+ - id: end-of-file-fixer
+ - id: trailing-whitespace
+
+ - repo: https://github.com/pycqa/pylint
+ rev: v3.0.0a6
+ hooks:
+ - id: pylint
+
+ - repo: https://github.com/igorshubovych/markdownlint-cli
+ rev: v0.35.0
+ hooks:
+ - id: markdownlint-docker
+ args:
+ - --config=docs/.markdownlint.yaml
+ - --ignore=README.md
+ - --ignore=docs/index.md
+ - "docs/**/*.md"

README.md

@@ -11,39 +11,48 @@
 ## Extra goodies for [`GEF`](https://github.com/hugsy/gef)
 
 
-This is an open repository of external scripts and structures to be used by [GDB Enhanced Features (GEF)](https://github.com/hugsy/gef). To use those scripts once `gef` is setup, simply clone this repository and update your GEF settings like this:
-
+This is an open repository of external scripts and structures to be used by
+[GDB Enhanced Features (GEF)](https://github.com/hugsy/gef). To use those scripts once `gef` is
+setup, simply clone this repository and update your GEF settings like this:
 
 
 ## Get Started
 
-Getting started with GEF-Extras couldn't be easier: make sure you have a working GDB and GEF already installed, then run the following command:
+Getting started with GEF-Extras couldn't be easier: make sure you have a working GDB and GEF
+already installed, then run the following command:
 
 ```bash
-$ wget -q -O- https://github.com/hugsy/gef/raw/main/scripts/gef-extras.sh | sh
+wget -q -O- https://github.com/hugsy/gef/raw/main/scripts/gef-extras.sh | sh
 ```
 
 
+## Documentation
 
-## Documentation ##
-
-Just like [GEF](https://hugsy.github.io/gef), GEF-Extras aims to have and keep to-date [a through documentation](https://hugsy.github.io/gef-extras/). Users are recommended to refer to it as it may help them in their attempts to use GEF. In particular, new users should navigate through it (see the [FAQ](https://hugsy.github.io/gef/faq/) for common installation problems), and the problem persists, try to reach out for help on the Discord channel or submit an issue.
+Just like [GEF](https://hugsy.github.io/gef), GEF-Extras aims to have and keep to-date
+[a through documentation](https://hugsy.github.io/gef-extras/). Users are recommended to refer to
+it as it may help them in their attempts to use GEF. In particular, new users should navigate
+through it (see the [FAQ](https://hugsy.github.io/gef/faq/) for common installation problems), and
+the problem persists, try to reach out for help on the Discord channel or submit an issue.
 
 
-## Current status ##
+## Current status
 
-| Documentation | License | Compatibility | CI Tests (`main`)  |
-| ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | ------------------------------------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| Documentation | License | Compatibility | CI Tests (`main`) |
+| ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | ------------------------------------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
 | [![Documentation](https://github.com/hugsy/gef-extras/actions/workflows/generate-docs.yml/badge.svg)](https://github.com/hugsy/gef-extras/actions/workflows/generate-docs.yml) | [![MIT](https://img.shields.io/packagist/l/doctrine/orm.svg?maxAge=2592000?style=plastic)](https://github.com/hugsy/gef-extras/blob/main/LICENSE) | [![Python 3](https://img.shields.io/badge/Python-3-green.svg)](https://github.com/hugsy/gef-extras/) | [![CI Test for GEF-Extras](https://github.com/hugsy/gef-extras/actions/workflows/tests.yml/badge.svg)](https://github.com/hugsy/gef-extras/actions/workflows/tests.yml) |
 
 
-## Contribute ##
+## Contribute
 
-To get involved, refer to the [Contribution documentation](https://hugsy.github.io/gef-extras/#contribution) and the [GEF guidelines](https://github.com/hugsy/gef/blob/main/.github/CONTRIBUTING.md) to start.
+To get involved, refer to the
+[Contribution documentation](https://hugsy.github.io/gef-extras/#contribution) and the
+[GEF guidelines](https://github.com/hugsy/gef/blob/main/.github/CONTRIBUTING.md) to start.
 
-## Sponsors ##
+## Sponsors
 
-Another way to contribute to keeping the project alive is by sponsoring it! Check out [the sponsoring documentation](https://hugsy.github.io/gef/#sponsors) for details so you can be part of the list of those [awesome sponsors](https://github.com/sponsors/hugsy).
+Another way to contribute to keeping the project alive is by sponsoring it! Check out
+[the sponsoring documentation](https://hugsy.github.io/gef/#sponsors) for details so you can be
+part of the list of those [awesome sponsors](https://github.com/sponsors/hugsy).
 
 
-## Happy Hacking 🍻 ##
+## Happy Hacking 🍻

archs/README.md

@@ -1 +1,3 @@
+## Additional architectures for GEF
+
 Experiements for adding new architectures support for GEF