Skip to content

Commit

Permalink
Fixed hydranfc_emul_mf_ultralight.c READ command (tested with success…
Browse files Browse the repository at this point in the history 
… with libnfc 1.7.1 nfc-mfultralight.exe r dump.mfd)
  • Loading branch information
@bvernoux
bvernoux committed May 16, 2016
1 parent d715e8f commit fbc20de
Showing 1 changed file with 150 additions and 76 deletions.
226 changes: 150 additions & 76 deletions hydranfc/hydranfc_emul_mf_ultralight.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -31,14 +31,23 @@ typedef enum {
EMUL_RX_MF_ULTRALIGHT_SEL1_UID, /* Wait RX SEL UID 0x93 0x70 0x88(CT) + UID 0, 1, 2 + BCC */
EMUL_RX_MF_ULTRALIGHT_ANTICOL_L2, /* Wait RX ANTICOL 0x95 0x20 */
EMUL_RX_MF_ULTRALIGHT_SEL2_UID, /* Wait RX SEL UID 0x95 0x70 + UID 3, 4, 5, 6 + BCC */
EMUL_RX_MF_ULTRALIGHT_END_ANTICOL, /* End of Anticol */

EMUL_RX_MF_ULTRALIGHT_CMD /* Wait command */
} emul_mf_ultralight_state;

#define TRF7970A_IRQ_STATUS_RX_TX 0xC0
#define TRF7970A_IRQ_STATUS_TX 0x80
#define TRF7970A_IRQ_STATUS_RX 0x40
#define TRF7970A_IRQ_STATUS_FIFO 0x20
/* IRQ Status flag for NFC and Card Emulation Operation */
typedef enum
{
IRQ_STATUS_COLLISION_ERROR = 0x01,
IRQ_STATUS_COLLISION_AVOID_FINISHED = 0x02,
IRQ_STATUS_RF_FIELD_CHANGE = 0x04,
IRQ_STATUS_SDD_COMPLETE = 0x08,
IRQ_STATUS_PROTOCOL_ERROR = 0x10,
IRQ_STATUS_FIFO_HIGH_OR_LOW = 0x20,
IRQ_STATUS_RX_COMPLETE = 0x40,
IRQ_STATUS_TX_COMPLETE = 0x80
} t_trf7970a_irq_flag;

/*
Mifare Ultralight/MF0ICU1 commands see http://cache.nxp.com/documents/data_sheet/MF0ICU1.pdf?pspll=1
Expand Down Expand Up @@ -106,69 +115,84 @@ void hydranfc_emul_mf_ultralight_init(void)
uint8_t data_buf[2];

/* Init TRF797x */
Trf797xInitialSettings();
Trf797xResetFIFO();

/* Clear ISO14443 TX */
data_buf[0] = ISO_14443B_OPTIONS;
data_buf[1] = 0x00;
Trf797xWriteSingle(data_buf, 2);
data_buf[0] = SOFT_INIT;
Trf797xDirectCommand(data_buf);
data_buf[0] = IDLE;
Trf797xDirectCommand(data_buf);

/* Configure modulator OOK 100% */
data_buf[0] = MODULATOR_CONTROL;
data_buf[1] = 0x01;
Trf797xWriteSingle(data_buf, 2);

/* Configure REGULATOR_CONTROL (Automatic setting, 5V voltage VDD_RF) */
data_buf[0] = REGULATOR_CONTROL;
data_buf[1] = 0x87;
/* Configure Chip Status Register (0x00) to 0x21 (RF output active and 5v operations) */
data_buf[0] = CHIP_STATE_CONTROL;
data_buf[1] = 0x21;
Trf797xWriteSingle(data_buf, 2);

/*
* Configure Mode ISO Control Register (0x01)
* Card Emulation Mode
*/
data_buf[0] = ISO_CONTROL;
data_buf[1] = 0x21; // 106 kbps
Trf797xWriteSingle(data_buf, 2);

/* Configure RX
(Bandpass 450 kHz to 1.5 MHZ & Bandpass 100 kHz to 1.5 MHz Gain reduced for 18 dB)
* AGC no limit B0=1 */
[AGC 8 subcarrier pulses]
[AGC activation level change:5x]
[Gain reduction 0 dB]
[Bandpass 100 kHz to 1.5 MHz (Gain reduced for 18 dB)]
[Bandpass 450 kHz to 1.5 MHz] [Bandpass 200 kHz to 900 kHz] [Bandpass 110 kHz to 570 kHz]
*/
data_buf[0] = RX_SPECIAL_SETTINGS;
data_buf[1] = 0x31;
data_buf[1] = 0xF0;
Trf797xWriteSingle(data_buf, 2);

/* Configure Test Settings 1 to BIT6/0x40 => MOD Pin becomes receiver subcarrier output (Digital Output for RX/TX) => Used for Sniffer */
data_buf[0] = TEST_SETTINGS_1;
data_buf[1] = BIT6;
/* Configure REGULATOR_CONTROL */
data_buf[0] = REGULATOR_CONTROL;
data_buf[1] = 0x01;
Trf797xWriteSingle(data_buf, 2);

/* Configure Adjustable FIFO IRQ Levels Register (96B RX & 32B TX) */
data_buf[0] = 0x14;
data_buf[0] = NFC_FIFO_IRQ_LEVELS;
data_buf[1] = 0x0F;
Trf797xWriteSingle(data_buf, 2);

/* Configure NFC Low Field Level Register */
/* NFC passive 106-kbps and ISO14443A card emulation */
/* RF field level for RF collision avoidance b011 250mV See Table 6-16 */
data_buf[0] = 0x16;
data_buf[1] = 0x83;
/* NFC Low Field Detection Level=0x03 See Table 6-16 */
data_buf[0] = NFC_LOW_DETECTION;
data_buf[1] = 0x03;
Trf797xWriteSingle(data_buf, 2);

/* Configure NFC Target Detection Level Register */
/* RF field level required for system wakeup to max */
data_buf[0] = 0x18;
data_buf[0] = NFC_TARGET_LEVEL;
data_buf[1] = 0x07;
Trf797xWriteSingle(data_buf, 2);

Trf797xResetFIFO();
Trf797xStopDecoders(); /* Disable Receiver */
/* Read IRQ Status */
Trf797xReadIrqStatus(data_buf);

/* Read NFC Target Protocol */
data_buf[0] = NFC_TARGET_PROTOCOL;
Trf797xReadSingle(data_buf, 1); // determine the number of bytes left in FIFO

Trf797xRunDecoders(); /* Enable Receiver */

/*
* Configure Mode ISO Control Register (0x01) to 0xA4
* NFC or Card Emulation Mode, no RX CRC (CRC is not present in the response)
* Card Emulation Mode
*/
data_buf[0] = ISO_CONTROL;
data_buf[1] = 0xA4;
#if 0
/* Configure Test Settings 1 to BIT6/0x40 => MOD Pin becomes receiver subcarrier output (Digital Output for RX/TX) => Used for Sniffer */
data_buf[0] = TEST_SETTINGS_1;
data_buf[1] = BIT6;
Trf797xWriteSingle(data_buf, 2);

Trf797xStopDecoders(); /* Disable Receiver */
Trf797xRunDecoders(); /* Enable Receiver */

/* Turn RF ON (Chip Status Control Register (0x00)) */
Trf797xTurnRfOn();
#endif
}

/* Return Nb data sent (0 if error) */
Expand Down Expand Up @@ -330,21 +354,12 @@ void hydranfc_emul_mf_ultralight_states(void)
data_buf[0] = ISO14443A_L2_SAK;
wait_nbcycles(324);
if(emul_mf_ultralight_tx_rawdata(data_buf, 1, 1) == 1) {
/*
BIT1 = Disable anticollision frames for 14443A
(this bit should be set to 1 after anticollision is finished)
BIT2 = 4-bit receive, Enable 4-bit replay for example, ACK, NACK used by MIFARE Ultralight
*/
data_buf[0] = SPECIAL_FUNCTION;
data_buf[1] = (BIT1 | BIT2);
Trf797xWriteSingle(data_buf, 2);
/*
Trf797xReadSingle(&data_buf[1], SPECIAL_FUNCTION);
// Disable Anti-collision Frames for 14443A.
Trf797xWriteSingle(BIT2 | ui8Temp, SPECIAL_FUNCTION);
*/

emul_mf_ultralight_14443a_state = EMUL_RX_MF_ULTRALIGHT_CMD;
emul_mf_ultralight_14443a_state = EMUL_RX_MF_ULTRALIGHT_END_ANTICOL;
} else
error=1;
} else
Expand All @@ -353,11 +368,13 @@ void hydranfc_emul_mf_ultralight_states(void)
error=1;
break;

case EMUL_RX_MF_ULTRALIGHT_END_ANTICOL:
emul_mf_ultralight_14443a_state = EMUL_RX_MF_ULTRALIGHT_CMD;
case EMUL_RX_MF_ULTRALIGHT_CMD:
data_buf[0] = FIFO;
Trf797xReadCont(data_buf, fifo_size);

if(fifo_size >= 4)
if(fifo_size >= 2)
{
switch(data_buf[0])
{
Expand All @@ -376,7 +393,7 @@ void hydranfc_emul_mf_ultralight_states(void)
if(page_num > 12)
page_num = 12; // Limit the page num to avoid buffer overflow

if(emul_mf_ultralight_tx_rawdata(&mf_ultralight_data[page_num][0], 16, 1) == 1) {
if(emul_mf_ultralight_tx_rawdata(&mf_ultralight_data[page_num][0], 16, 1) == 16) {
emul_mf_ultralight_14443a_state = EMUL_RX_MF_ULTRALIGHT_CMD;
} else
error=1;
Expand Down Expand Up @@ -408,55 +425,112 @@ void hydranfc_emul_mf_ultralight_states(void)
/* Error on Protocol */
if(error > 0) {
emul_mf_ultralight_14443a_state = EMUL_RX_MF_ULTRALIGHT_REQA_WUPA;

/* Re-Init TRF7970A on status error */
data_buf[0] = SOFT_INIT;
Trf797xDirectCommand(data_buf);
data_buf[0] = IDLE;
Trf797xDirectCommand(data_buf);
hydranfc_emul_mf_ultralight_init();
}
}

static t_trf7970a_irq_flag status;
static uint8_t nfc_target_protocol;
void hydranfc_emul_mf_ultralight_irq(void)
{
uint8_t data_buf[2];
int status;
//uint8_t nfc_target_protocol;
int error = 0;

/* Read NFC Target Protocol */
data_buf[0] = NFC_TARGET_PROTOCOL;
Trf797xReadSingle(data_buf, 1); // determine the number of bytes left in FIFO
nfc_target_protocol = data_buf[0];

/* Read IRQ Status */
Trf797xReadIrqStatus(data_buf);
status = data_buf[0];

/* Read NFC Target Protocol */
/*
data_buf[0] = NFC_TARGET_PROTOCOL;
Trf797xReadSingle (data_buf, 1);
nfc_target_protocol = data_buf[0];
*/
if(status & IRQ_STATUS_TX_COMPLETE)
{
if(status == IRQ_STATUS_TX_COMPLETE)
{
// Reset FIFO CMD
Trf797xResetFIFO();

switch(status) {
case TRF7970A_IRQ_STATUS_TX:
//data_buf[0] = RSSI_LEVELS;
//Trf797xReadSingle(data_buf, 1);
break;
switch(emul_mf_ultralight_14443a_state)
{
case EMUL_RX_MF_ULTRALIGHT_ANTICOL_L1:
/*
* Configure Mode ISO Control Register (0x01) to 0xA4 (no RX CRC)
*/
data_buf[0] = ISO_CONTROL;
data_buf[1] = 0xA4;
Trf797xWriteSingle(data_buf, 2);
break;

case EMUL_RX_MF_ULTRALIGHT_END_ANTICOL:
/*
* Configure Mode ISO Control Register (0x01) to 0x24 (RX CRC)
*/
data_buf[0] = ISO_CONTROL;
data_buf[1] = 0x24;
Trf797xWriteSingle(data_buf, 2);

/*
BIT1 = Disable anticollision frames for 14443A
(this bit should be set to 1 after anticollision is finished)
*/
data_buf[0] = SPECIAL_FUNCTION;
data_buf[1] = BIT1;
Trf797xWriteSingle(data_buf, 2);
break;

default:
break;
}
}else
{
/* Read FIFO Status(0x1C=>0x5C) */
data_buf[0] = FIFO_CONTROL;
Trf797xReadSingle(data_buf, 1); // determine the number of bytes left in FIFO
}
}

case TRF7970A_IRQ_STATUS_RX:
hydranfc_emul_mf_ultralight_states();
break;
if(status & IRQ_STATUS_RX_COMPLETE)
{
if(nfc_target_protocol == 0xC9) /* 106kbps RF Level OK */
{
hydranfc_emul_mf_ultralight_states();
}else
{
error = 1;
}
}

default:
/* Re-Init Internal Emul 14443A state */
emul_mf_ultralight_14443a_state = EMUL_RX_MF_ULTRALIGHT_REQA_WUPA;
if(status & IRQ_STATUS_RF_FIELD_CHANGE)
{
if(nfc_target_protocol != 0xC9) /* 106kbps RF Level OK */
{
error = 1;
}
}

/* Re-Init TRF7970A on status error */
data_buf[0] = SOFT_INIT;
Trf797xDirectCommand(data_buf);
data_buf[0] = IDLE;
Trf797xDirectCommand(data_buf);
if(status & IRQ_STATUS_PROTOCOL_ERROR)
{
error = 1;
}

if(status & IRQ_STATUS_COLLISION_ERROR)
{
error = 1;
}

if(status & IRQ_STATUS_COLLISION_AVOID_FINISHED)
{
error = 1;
}

if(error > 0)
{
/* Re-Init Internal Emul 14443A state */
emul_mf_ultralight_14443a_state = EMUL_RX_MF_ULTRALIGHT_REQA_WUPA;
hydranfc_emul_mf_ultralight_init();
break;
}
}

Expand Down

0 comments on commit fbc20de

Please sign in to comment.