Merge pull request #9955 from iNavFlight/mmosca-backport-new-targets

Cherry pick TAKERF722SE target from master

src/main/target/TAKERF722SE/CMakeLists.txt

@@ -0,0 +1 @@
+target_stm32f722xe(TAKERF722SE)

src/main/target/TAKERF722SE/target.c

@@ -0,0 +1,48 @@
+/*
+* This file is part of INAV Project.
+*
+* INAV is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation, either version 3 of the License, or
+* (at your option) any later version.
+*
+* INAV is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with INAV.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+
+#include "platform.h"
+#include "drivers/io.h"
+
+#include "drivers/dma.h"
+#include "drivers/timer.h"
+#include "drivers/timer_def.h"
+
+
+
+
+
+timerHardware_t timerHardware[] = {
+
+    DEF_TIM(TIM3, CH1, PB4,  TIM_USE_OUTPUT_AUTO, 0, 0),
+    DEF_TIM(TIM3, CH2, PB5,  TIM_USE_OUTPUT_AUTO, 0, 0),
+    DEF_TIM(TIM3, CH3, PB0,  TIM_USE_OUTPUT_AUTO, 0, 0),
+    DEF_TIM(TIM3, CH4, PB1,  TIM_USE_OUTPUT_AUTO, 0, 0),
+
+    DEF_TIM(TIM4, CH1, PB6,  TIM_USE_OUTPUT_AUTO, 0, 0),
+    DEF_TIM(TIM4, CH2, PB7,  TIM_USE_OUTPUT_AUTO, 0, 0),
+    DEF_TIM(TIM8, CH3, PC8,  TIM_USE_OUTPUT_AUTO, 0, 0),
+    DEF_TIM(TIM8, CH4, PC9,  TIM_USE_OUTPUT_AUTO, 0, 0),
+
+    DEF_TIM(TIM1, CH1, PA8, TIM_USE_LED,                         0, 0),
+};
+
+const int timerHardwareCount = sizeof(timerHardware) / sizeof(timerHardware[0]);
+
+

src/main/target/TAKERF722SE/target.h

@@ -0,0 +1,186 @@
+/*
+ * This file is part of INAV Project.
+ *
+ * Cleanflight is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * INAV is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with INAV.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define TARGET_BOARD_IDENTIFIER "GEPR"
+
+#define USBD_PRODUCT_STRING     "TAKERF722SE"
+
+#define LED0                    PC14
+
+
+// *************** BEEPER ************************
+
+#define BEEPER                  PC13
+#define BEEPER_INVERTED
+
+
+// *************** LEDSTRIP ************************
+#define USE_LED_STRIP
+#define WS2811_PIN                  PA8
+
+
+// *************** UART *****************************
+#define USE_VCP
+
+#define USE_UART1
+#define UART1_TX_PIN            PA9
+#define UART1_RX_PIN            PA10
+
+#define USE_UART2
+#define UART2_TX_PIN            PA2
+#define UART2_RX_PIN            PA3
+
+#define USE_UART3
+#define UART3_TX_PIN            PB10
+#define UART3_RX_PIN            PB11
+
+#define USE_UART4
+#define UART4_TX_PIN            PA0
+#define UART4_RX_PIN            PA1
+
+#define USE_UART5
+#define UART5_TX_PIN            PC12
+#define UART5_RX_PIN            PD2
+
+#define USE_UART6
+#define UART6_TX_PIN            PC6
+#define UART6_RX_PIN            PC7
+
+
+#define SERIAL_PORT_COUNT       7
+
+#define DEFAULT_RX_TYPE         RX_TYPE_SERIAL
+#define SERIALRX_PROVIDER       SERIALRX_SBUS
+#define SERIALRX_UART           SERIAL_PORT_USART2
+
+
+// *************** SPI Bus **********************
+
+#define USE_SPI
+
+#define USE_SPI_DEVICE_1
+#define SPI1_SCK_PIN            PA5
+#define SPI1_MISO_PIN           PA6
+#define SPI1_MOSI_PIN           PA7
+
+#define USE_SPI_DEVICE_2
+#define SPI2_SCK_PIN            PB13
+#define SPI2_MISO_PIN   	    PB14
+#define SPI2_MOSI_PIN   	    PB15
+
+#define USE_SPI_DEVICE_3
+#define SPI3_SCK_PIN            PC10
+#define SPI3_MISO_PIN           PC11
+#define SPI3_MOSI_PIN           PB2
+#define SPI3_SCK_AF             GPIO_AF6_SPI3
+#define SPI3_MISO_AF            GPIO_AF6_SPI3
+#define SPI3_MOSI_AF            GPIO_AF7_SPI3
+
+
+// *************** Gyro & ACC **********************
+
+#define USE_IMU_MPU6000
+#define IMU_MPU6000_ALIGN       CW0_DEG
+#define MPU6000_CS_PIN          PA4
+#define MPU6000_SPI_BUS         BUS_SPI1
+
+
+#define USE_IMU_ICM42605
+#define IMU_ICM42605_ALIGN      CW0_DEG
+#define ICM42605_CS_PIN         PA4
+#define ICM42605_SPI_BUS        BUS_SPI1
+
+// *************** I2C/Baro/Mag *********************
+#define USE_I2C
+#define USE_I2C_DEVICE_1
+#define I2C1_SCL                PB8
+#define I2C1_SDA                PB9
+
+
+//***************************************************
+#define USE_BARO
+#define BARO_I2C_BUS            BUS_I2C1
+#define USE_BARO_BMP280
+#define USE_BARO_DPS310
+#define USE_BARO_MS5611
+
+#define USE_MAG
+#define MAG_I2C_BUS             BUS_I2C1
+#define USE_MAG_HMC5883
+#define USE_MAG_QMC5883
+#define USE_MAG_IST8310
+#define USE_MAG_IST8308
+
+#define TEMPERATURE_I2C_BUS     BUS_I2C1
+
+#define PITOT_I2C_BUS           BUS_I2C1
+
+#define USE_RANGEFINDER
+#define RANGEFINDER_I2C_BUS     BUS_I2C1
+#define BNO055_I2C_BUS          BUS_I2C1
+
+// *************** FLASH **************************
+
+#define USE_FLASHFS
+
+#define USE_FLASH_M25P16
+#define M25P16_CS_PIN           PA15
+#define M25P16_SPI_BUS          BUS_SPI3
+
+#define ENABLE_BLACKBOX_LOGGING_ON_SPIFLASH_BY_DEFAULT
+
+// *************** OSD *****************************
+
+#define USE_MAX7456
+#define MAX7456_SPI_BUS         BUS_SPI2
+#define MAX7456_CS_PIN          PB12
+
+// *************** ADC *****************************
+
+#define USE_ADC
+#define ADC_INSTANCE                ADC1
+#define ADC1_DMA_STREAM             DMA2_Stream0
+#define ADC_CHANNEL_1_PIN           PC3
+#define ADC_CHANNEL_2_PIN           PC0
+#define ADC_CHANNEL_3_PIN           PC2
+
+#define VBAT_ADC_CHANNEL            ADC_CHN_1
+#define RSSI_ADC_CHANNEL            ADC_CHN_2
+#define CURRENT_METER_ADC_CHANNEL   ADC_CHN_3
+
+
+#define DEFAULT_FEATURES            (FEATURE_TX_PROF_SEL | FEATURE_CURRENT_METER | FEATURE_TELEMETRY | FEATURE_VBAT | FEATURE_OSD | FEATURE_BLACKBOX)
+
+
+
+
+//**************************************************
+
+#define USE_SERIAL_4WAY_BLHELI_INTERFACE
+
+#define TARGET_IO_PORTA         0xffff
+#define TARGET_IO_PORTB         0xffff
+#define TARGET_IO_PORTC         0xffff
+#define TARGET_IO_PORTD         (BIT(2))
+
+
+#define MAX_PWM_OUTPUT_PORTS        8
+
+#define USE_DSHOT
+#define USE_ESC_SENSOR