platform/x86: mlx-platform: Add physical bus number auto detection

mlx-platform does not provide a bus number to i2c-mlxcpld, assuming it
is always one. On some x86 systems, other i2c drivers may probe before
i2c-mlxcpld, causing bus one to be busy.

Make mlx-platform determine which adapter number is free prior to
activating i2c-mlxpld, adjusting the mux base numbers accordingly.
Update the mlxreg-hotplug pdata similarly.

This adds an explicit mlx-platform build dependency on I2C, update the
Kconfig accordingly. Add the missing REGMAP dependency while we're at
it.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
[dvhart: Rewrite commit message more concisely]
[dvhart: Add build dependencies]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

drivers/platform/mellanox/mlxreg-hotplug.c

@@ -96,26 +96,30 @@ struct mlxreg_hotplug_priv_data {
 static int mlxreg_hotplug_device_create(struct mlxreg_hotplug_priv_data *priv,
 					struct mlxreg_core_data *data)
 {
+	struct mlxreg_core_hotplug_platform_data *pdata;
+
 	/*
 	 * Return if adapter number is negative. It could be in case hotplug
 	 * event is not associated with hotplug device.
 	 */
 	if (data->hpdev.nr < 0)
 		return 0;
 
-	data->hpdev.adapter = i2c_get_adapter(data->hpdev.nr);
+	pdata = dev_get_platdata(&priv->pdev->dev);
+	data->hpdev.adapter = i2c_get_adapter(data->hpdev.nr +
+					      pdata->shift_nr);
 	if (!data->hpdev.adapter) {
 		dev_err(priv->dev, "Failed to get adapter for bus %d\n",
-			data->hpdev.nr);
+			data->hpdev.nr + pdata->shift_nr);
 		return -EFAULT;
 	}
 
 	data->hpdev.client = i2c_new_device(data->hpdev.adapter,
 					    data->hpdev.brdinfo);
 	if (!data->hpdev.client) {
 		dev_err(priv->dev, "Failed to create client %s at bus %d at addr 0x%02x\n",
-			data->hpdev.brdinfo->type, data->hpdev.nr,
-			data->hpdev.brdinfo->addr);
+			data->hpdev.brdinfo->type, data->hpdev.nr +
+			pdata->shift_nr, data->hpdev.brdinfo->addr);
 
 		i2c_put_adapter(data->hpdev.adapter);
 		data->hpdev.adapter = NULL;

drivers/platform/x86/Kconfig

@@ -1175,6 +1175,7 @@ config INTEL_TELEMETRY
 
 config MLX_PLATFORM
 	tristate "Mellanox Technologies platform support"
+	depends on I2C && REGMAP
 	---help---
 	  This option enables system support for the Mellanox Technologies
 	  platform. The Mellanox systems provide data center networking

drivers/platform/x86/mlx-platform.c

@@ -85,6 +85,12 @@
 #define MLXPLAT_CPLD_FAN_MASK		GENMASK(3, 0)
 #define MLXPLAT_CPLD_FAN_NG_MASK	GENMASK(5, 0)
 
+/* Default I2C parent bus number */
+#define MLXPLAT_CPLD_PHYS_ADAPTER_DEF_NR	1
+
+/* Maximum number of possible physical buses equipped on system */
+#define MLXPLAT_CPLD_MAX_PHYS_ADAPTER_NUM	16
+
 /* Number of channels in group */
 #define MLXPLAT_CPLD_GRP_CHNL_NUM		8
 
@@ -843,10 +849,48 @@ static const struct dmi_system_id mlxplat_dmi_table[] __initconst = {
 
 MODULE_DEVICE_TABLE(dmi, mlxplat_dmi_table);
 
+static int mlxplat_mlxcpld_verify_bus_topology(int *nr)
+{
+	struct i2c_adapter *search_adap;
+	int shift, i;
+
+	/* Scan adapters from expected id to verify it is free. */
+	*nr = MLXPLAT_CPLD_PHYS_ADAPTER_DEF_NR;
+	for (i = MLXPLAT_CPLD_PHYS_ADAPTER_DEF_NR; i <
+	     MLXPLAT_CPLD_MAX_PHYS_ADAPTER_NUM; i++) {
+		search_adap = i2c_get_adapter(i);
+		if (search_adap) {
+			i2c_put_adapter(search_adap);
+			continue;
+		}
+
+		/* Return if expected parent adapter is free. */
+		if (i == MLXPLAT_CPLD_PHYS_ADAPTER_DEF_NR)
+			return 0;
+		break;
+	}
+
+	/* Return with error if free id for adapter is not found. */
+	if (i == MLXPLAT_CPLD_MAX_PHYS_ADAPTER_NUM)
+		return -ENODEV;
+
+	/* Shift adapter ids, since expected parent adapter is not free. */
+	*nr = i;
+	for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) {
+		shift = *nr - mlxplat_mux_data[i].parent;
+		mlxplat_mux_data[i].parent = *nr;
+		mlxplat_mux_data[i].base_nr += shift;
+		if (shift > 0)
+			mlxplat_hotplug->shift_nr = shift;
+	}
+
+	return 0;
+}
+
 static int __init mlxplat_init(void)
 {
 	struct mlxplat_priv *priv;
-	int i, err;
+	int i, nr, err;
 
 	if (!dmi_check_system(mlxplat_dmi_table))
 		return -ENODEV;
@@ -866,7 +910,12 @@ static int __init mlxplat_init(void)
 	}
 	platform_set_drvdata(mlxplat_dev, priv);
 
-	priv->pdev_i2c = platform_device_register_simple("i2c_mlxcpld", -1,
+	err = mlxplat_mlxcpld_verify_bus_topology(&nr);
+	if (nr < 0)
+		goto fail_alloc;
+
+	nr = (nr == MLXPLAT_CPLD_MAX_PHYS_ADAPTER_NUM) ? -1 : nr;
+	priv->pdev_i2c = platform_device_register_simple("i2c_mlxcpld", nr,
 							 NULL, 0);
 	if (IS_ERR(priv->pdev_i2c)) {
 		err = PTR_ERR(priv->pdev_i2c);

include/linux/platform_data/mlxreg.h

@@ -130,6 +130,7 @@ struct mlxreg_core_platform_data {
  * @cell_low: location of low aggregation interrupt register;
  * @mask_low: low aggregation interrupt common mask;
  * @deferred_nr: I2C adapter number must be exist prior probing execution;
+ * @shift_nr: I2C adapter numbers must be incremented by this value;
  */
 struct mlxreg_core_hotplug_platform_data {
 	struct mlxreg_core_item *items;
@@ -141,6 +142,7 @@ struct mlxreg_core_hotplug_platform_data {
 	u32 cell_low;
 	u32 mask_low;
 	int deferred_nr;
+	int shift_nr;
 };
 
 #endif /* __LINUX_PLATFORM_DATA_MLXREG_H */