Bats-core: Bash Automated Testing System (2018)

Bats is a TAP-compliant testing framework for Bash. It provides a simple way to verify that the UNIX programs you write behave as expected.

A Bats test file is a Bash script with special syntax for defining test cases. Under the hood, each test case is just a function with a description.

#!/usr/bin/env bats

@test "addition using bc" {
  result="$(echo 2+2 | bc)"
  [ "$result" -eq 4 ]
}

@test "addition using dc" {
  result="$(echo 2 2+p | dc)"
  [ "$result" -eq 4 ]
}

Bats is most useful when testing software written in Bash, but you can use it to test any UNIX program.

Test cases consist of standard shell commands. Bats makes use of Bash's errexit (set -e) option when running test cases. If every command in the test case exits with a 0 status code (success), the test passes. In this way, each line is an assertion of truth.

Installation

Supported Bash versions

The following is a list of Bash versions that are currently supported by Bats. This list is composed of platforms that Bats has been tested on and is known to work on without issues.

Bash versions:
- Everything from 3.2.57(1) and higher (macOS's highest version)
Operating systems:
- Arch Linux
- Alpine Linux
- Ubuntu Linux
- FreeBSD 10.x and 11.x
- macOS
- Windows 10
Latest version for the following Windows platforms:
- Git for Windows Bash (MSYS2 based)
- Windows Subsystem for Linux
- MSYS2
- Cygwin

Homebrew

On macOS, you can install Homebrew if you haven't already, then run:

$ brew install bats-core

npm

You can install the Bats npm package via:

# To install globally:
$ npm install -g bats

# To install into your project and save it as one of the "devDependencies" in
# your package.json:
$ npm install --save-dev bats

Installing Bats from source

Check out a copy of the Bats repository. Then, either add the Bats bin directory to your $PATH, or run the provided install.sh command with the location to the prefix in which you want to install Bats. For example, to install Bats into /usr/local,

$ git clone https://github.com/bats-core/bats-core.git
$ cd bats-core
$ ./install.sh /usr/local

Note: You may need to run install.sh with sudo if you do not have permission to write to the installation prefix.

Installing Bats from source onto Windows Git Bash

Check out a copy of the Bats repository and install it to $HOME. This will place the bats executable in $HOME/bin, which should already be in $PATH.

$ git clone https://github.com/bats-core/bats-core.git
$ cd bats-core
$ ./install.sh $HOME

Running Bats in Docker

There is an official image on the Docker Hub:

$ docker run -it bats/bats:latest --version

Building a Docker image

Check out a copy of the Bats repository, then build a container image:

$ git clone https://github.com/bats-core/bats-core.git
$ cd bats-core
$ docker build --tag bats/bats:latest .

This creates a local Docker image called bats/bats:latest based on Alpine Linux (to push to private registries, tag it with another organisation, e.g. my-org/bats:latest).

To run Bats' internal test suite (which is in the container image at /opt/bats/test):

$ docker run -it bats/bats:latest /opt/bats/test

To run a test suite from your local machine, mount in a volume and direct Bats to its path inside the container:

$ docker run -it -v "$(pwd):/code" bats/bats:latest /code/test

This is a minimal Docker image. If more tools are required this can be used as a base image in a Dockerfile using FROM <Docker image>. In the future there may be images based on Debian, and/or with more tools installed (curl and openssl, for example). If you require a specific configuration please search and +1 an issue or raise a new issue.

Further usage examples are in the wiki.

Usage

Bats comes with two manual pages. After installation you can view them with man 1 bats (usage manual) and man 7 bats (writing test files manual). Also, you can view the available command line options that Bats supports by calling Bats with the -h or --help options. These are the options that Bats currently supports:

Bats x.y.z
Usage: bats [-cr] [-f <regex>] [-j <jobs>] [-p | -t] <test>...
       bats [-h | -v]

  <test> is the path to a Bats test file, or the path to a directory
  containing Bats test files (ending with ".bats").

  -c, --count      Count the number of test cases without running any tests
  -f, --filter     Filter test cases by names matching the regular expression
  -h, --help       Display this help message
  -j, --jobs       Number of parallel jobs to run (requires GNU parallel)
  -p, --pretty     Show results in pretty format (default for terminals)
  -r, --recursive  Include tests in subdirectories
  -t, --tap        Show results in TAP format
  -v, --version    Display the version number

  For more information, see https://github.com/bats-core/bats-core

Mac OSX/Darwin Warning: If you're executing bats directly (bin/bats) you need to brew install coreutils to obtain greadlink. Darwin's readlink does not include the -f option. This may be fixed by this PR, which needs reviewers.

To run your tests, invoke the bats interpreter with one or more paths to test files ending with the .bats extension, or paths to directories containing test files. (bats will only execute .bats files at the top level of each directory; it will not recurse unless you specify the -r flag.)

Test cases from each file are run sequentially and in isolation. If all the test cases pass, bats exits with a 0 status code. If there are any failures, bats exits with a 1 status code.

When you run Bats from a terminal, you'll see output as each test is performed, with a check-mark next to the test's name if it passes or an "X" if it fails.

$ bats addition.bats
 ✓ addition using bc
 ✓ addition using dc

2 tests, 0 failures

If Bats is not connected to a terminal—in other words, if you run it from a continuous integration system, or redirect its output to a file—the results are displayed in human-readable, machine-parsable TAP format.

You can force TAP output from a terminal by invoking Bats with the --tap option.

$ bats --tap addition.bats
1..2
ok 1 addition using bc
ok 2 addition using dc

Parallel Execution

By default, Bats will execute your tests serially. However, Bats supports parallel execution of tests (provided you have GNU parallel or a compatible replacement installed) using the --jobs parameter. This can result in your tests completing faster (depending on your tests and the testing hardware).

Ordering of parallised tests is not guaranteed, so this mode may break suites with dependencies between tests (or tests that write to shared locations). When enabling --jobs for the first time be sure to re-run bats multiple times to identify any inter-test dependencies or non-deterministic test behaviour.

Writing tests

Each Bats test file is evaluated n+1 times, where n is the number of test cases in the file. The first run counts the number of test cases, then iterates over the test cases and executes each one in its own process.

For more details about how Bats evaluates test files, see Bats Evaluation Process on the wiki.

`run`: Test other commands

Many Bats tests need to run a command and then make assertions about its exit status and output. Bats includes a run helper that invokes its arguments as a command, saves the exit status and output into special global variables, and then returns with a 0 status code so you can continue to make assertions in your test case.

For example, let's say you're testing that the foo command, when passed a nonexistent filename, exits with a 1 status code and prints an error message.

@test "invoking foo with a nonexistent file prints an error" {
  run foo nonexistent_filename
  [ "$status" -eq 1 ]
  [ "$output" = "foo: no such file 'nonexistent_filename'" ]
}

The $status variable contains the status code of the command, and the $output variable contains the combined contents of the command's standard output and standard error streams.

A third special variable, the $lines array, is available for easily accessing individual lines of output. For example, if you want to test that invoking foo without any arguments prints usage information on the first line:

@test "invoking foo without arguments prints usage" {
  run foo
  [ "$status" -eq 1 ]
  [ "${lines[0]}" = "usage: foo <filename>" ]
}

Note: The run helper executes its argument(s) in a subshell, so if writing tests against environmental side-effects like a variable's value being changed, these changes will not persist after run completes.

`load`: Share common code

You may want to share common code across multiple test files. Bats includes a convenient load command for sourcing a Bash source file relative to the location of the current test file. For example, if you have a Bats test in test/foo.bats, the command

load test_helper

will source the script test/test_helper.bash in your test file. This can be useful for sharing functions to set up your environment or load fixtures.

If you want to source a file using an absolute file path then the file extension must be included. For example

load /test_helpers/test_helper.bash

`skip`: Easily skip tests

Tests can be skipped by using the skip command at the point in a test you wish to skip.

@test "A test I don't want to execute for now" {
  skip
  run foo
  [ "$status" -eq 0 ]
}

Optionally, you may include a reason for skipping:

@test "A test I don't want to execute for now" {
  skip "This command will return zero soon, but not now"
  run foo
  [ "$status" -eq 0 ]
}

Or you can skip conditionally:

@test "A test which should run" {
  if [ foo != bar ]; then
    skip "foo isn't bar"
  fi

  run foo
  [ "$status" -eq 0 ]
}

Note: setup and teardown hooks still run for skipped tests.

`setup` and `teardown`: Pre- and post-test hooks

You can define special setup and teardown functions, which run before and after each test case, respectively. Use these to load fixtures, set up your environment, and clean up when you're done.

Code outside of test cases

You can include code in your test file outside of @test functions. For example, this may be useful if you want to check for dependencies and fail immediately if they're not present. However, any output that you print in code outside of @test, setup or teardown functions must be redirected to stderr (>&2). Otherwise, the output may cause Bats to fail by polluting the TAP stream on stdout.

File descriptor 3 (read this if Bats hangs)

Bats makes a separation between output from the code under test and output that forms the TAP stream (which is produced by Bats internals). This is done in order to produce TAP-compliant output. In the Printing to the terminal section, there are details on how to use file descriptor 3 to print custom text properly.

A side effect of using file descriptor 3 is that, under some circumstances, it can cause Bats to block and execution to seem dead without reason. This can happen if a child process is spawned in the background from a test. In this case, the child process will inherit file descriptor 3. Bats, as the parent process, will wait for the file descriptor to be closed by the child process before continuing execution. If the child process takes a lot of time to complete (eg if the child process is a sleep 100 command or a background service that will run indefinitely), Bats will be similarly blocked for the same amount of time.

To prevent this from happening, close FD 3 explicitly when running any command that may launch long-running child processes, e.g. command_name 3>&- .

Printing to the terminal

Bats produces output compliant with version 12 of the TAP protocol. The produced TAP stream is by default piped to a pretty formatter for human consumption, but if Bats is called with the -t flag, then the TAP stream is directly printed to the console.

This has implications if you try to print custom text to the terminal. As mentioned in File descriptor 3, bats provides a special file descriptor, &3, that you should use to print your custom text. Here are some detailed guidelines to refer to:

Printing from within a test function:
- To have text printed from within a test function you need to redirect the output to file descriptor 3, eg echo 'text' >&3. This output will become part of the TAP stream. You are encouraged to prepend text printed this way with a hash (eg echo '# text' >&3) in order to produce 100% TAP compliant output. Otherwise, depending on the 3rd-party tools you use to analyze the TAP stream, you can encounter unexpected behavior or errors.
- The pretty formatter that Bats uses by default to process the TAP stream will filter out and not print text output to file descriptor 3.
- Text that is output directly to stdout or stderr (file descriptor 1 or 2), ie echo 'text' is considered part of the test function output and is printed only on test failures for diagnostic purposes, regardless of the formatter used (TAP or pretty).
Printing from within the setup or teardown functions: The same hold true as for printing with test functions.
Printing outside test or setup/teardown functions:
- Regardless of where text is redirected to (stdout, stderr or file descriptor 3) text is immediately visible in the terminal.
- Text printed in such a way, will disable pretty formatting. Also, it will make output non-compliant with the TAP spec. The reason for this is that each test file is evaluated n+1 times (as metioned earlier). The first run will cause such output to be produced before the plan line is printed, contrary to the spec that requires the plan line to be either the first or the last line of the output.
- Due to internal pipes/redirects, output to stderr is always printed first.

Special variables

There are several global variables you can use to introspect on Bats tests:

$BATS_TEST_FILENAME is the fully expanded path to the Bats test file.
$BATS_TEST_DIRNAME is the directory in which the Bats test file is located.
$BATS_TEST_NAMES is an array of function names for each test case.
$BATS_TEST_NAME is the name of the function containing the current test case.
$BATS_TEST_DESCRIPTION is the description of the current test case.
$BATS_TEST_NUMBER is the (1-based) index of the current test case in the test file.
$BATS_TMPDIR is the location to a directory that may be used to store temporary files.

Testing

bin/bats --tap test

See also the CI settings for the current test environment and scripts.

Support

The Bats source code repository is hosted on GitHub. There you can file bugs on the issue tracker or submit tested pull requests for review.

For real-world examples from open-source projects using Bats, see Projects Using Bats on the wiki.

To learn how to set up your editor for Bats syntax highlighting, see Syntax Highlighting on the wiki.

Contributing

For now see the docs folder for project guides, work with us on the wiki or look at the other communication channels.

Contact

We are #bats on freenode;
Or leave a message on gitter.

Version history

See docs/CHANGELOG.md.

Background

What's the plan and why?

Tuesday, September 19, 2017: This was forked from Bats at commit 0360811. It was created via git clone --bare and git push --mirror. See the Background section above for more information.

This bats-core repo is the community-maintained Bats project.

Why was this fork created?

There was an initial call for maintainers for the original Bats repository, but write access to it could not be obtained. With development activity stalled, this fork allowed ongoing maintenance and forward progress for Bats.

Copyright

Bats is released under an MIT-style license; see LICENSE.md for details.

See the parent project at GitHub or the AUTHORS file for the current project maintainer team.

Name		Name	Last commit message	Last commit date
Latest commit History 458 Commits
bin		bin
contrib/rpm		contrib/rpm
docs		docs
libexec/bats-core		libexec/bats-core
man		man
test		test
.appveyor.yml		.appveyor.yml
.editorconfig		.editorconfig
.gitattributes		.gitattributes
.travis.yml		.travis.yml
AUTHORS		AUTHORS
Dockerfile		Dockerfile
LICENSE.md		LICENSE.md
README.md		README.md
install.sh		install.sh
package.json		package.json
shellcheck.sh		shellcheck.sh

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Bats-core: Bash Automated Testing System (2018)

Table of contents

Installation

Supported Bash versions

Homebrew

npm

Installing Bats from source

Installing Bats from source onto Windows Git Bash

Running Bats in Docker

Building a Docker image

Usage

Parallel Execution

Writing tests

`run`: Test other commands

`load`: Share common code

`skip`: Easily skip tests

`setup` and `teardown`: Pre- and post-test hooks

Code outside of test cases

File descriptor 3 (read this if Bats hangs)

Printing to the terminal

Special variables

Testing

Support

Contributing

Contact

Version history

Background

What's the plan and why?

Why was this fork created?

Copyright

About

Releases

Packages

Languages

License

infOpen-Forks/bats-core

Folders and files

Latest commit

History

Repository files navigation

Bats-core: Bash Automated Testing System (2018)

Table of contents

Installation

Supported Bash versions

Homebrew

npm

Installing Bats from source

Installing Bats from source onto Windows Git Bash

Running Bats in Docker

Building a Docker image

Usage

Parallel Execution

Writing tests

run: Test other commands

load: Share common code

skip: Easily skip tests

setup and teardown: Pre- and post-test hooks

Code outside of test cases

File descriptor 3 (read this if Bats hangs)

Printing to the terminal

Special variables

Testing

Support

Contributing

Contact

Version history

Background

What's the plan and why?

Why was this fork created?

Copyright

About

Resources

License

Code of conduct

Stars

Watchers

Forks

Releases

Packages 0

Languages

`run`: Test other commands

`load`: Share common code

`skip`: Easily skip tests

`setup` and `teardown`: Pre- and post-test hooks

Packages