Is there a branch that supports Coffee Lake? #75
Comments
|
The coffee lake patches have been checked in gvt-staging branch, the latest tag is "gvt-staging-2019y-02m-22d-16h-20m-42s". |
|
Can you share the result of 'lspci -nn' and the kernel log? |
lspci -nn ]# dmesg |
|
[ 2.741934] [drm] Replacing VGA console driver ll /sys/bus/pci/devices/0000:00:02.0/mdev_supported_types/ |
|
I don't see obvious errors from the log. Driver will continue to run if firmware loading is failed. Can you add "drm.debug=2" in kernel command line to help to get more log? |
Could you confirm the kernel boot configuration and the mkinitramfs rule? kvmgt xengt vfio-iommu-type1 vfio-mdev For Fedora or RHEL you should make the similar changes in "dracut". 3.2.2 Build Kernel Source cd gvt-linux git checkout gvt-stable-4.17 echo ""|make oldconfig Then make sure to enable CONFIG_DRM_I915_GVT, CONFIG_DRM_I915_GVT_KVMGT and CONFIG_DRM_I915_GVT_XENGT in ".config", which depends on CONFIG_VFIO_MDEV and CONFIG_VFIO_MDEV_DEVICE. make -j8 && make modules_install && make install |
|
config.txt |
|
Could you help to add these kernel boot options for further debug?
ignore_loglevel drm.debug=2 "dyndbg=file *gvt* +p"
…-Weinan
From: l-cd [mailto:notifications@github.com]
Sent: Thursday, February 28, 2019 11:14 PM
To: intel/gvt-linux <gvt-linux@noreply.github.com>
Cc: Li, Weinan Z <weinan.z.li@intel.com>; Mention <mention@noreply.github.com>
Subject: Re: [intel/gvt-linux] Is there a branch that supports Coffee Lake? (#75)
config.txt<https://github.com/intel/gvt-linux/files/2915583/config.txt>
dracut.txt<https://github.com/intel/gvt-linux/files/2915585/dracut.txt>
lsinitrd.txt<https://github.com/intel/gvt-linux/files/2915586/lsinitrd.txt>
@weinanl<https://github.com/weinanl>
Centos 7.6
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub<#75 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/Ac4kmHOcmbaFC9gKhSWkxiFmho6QNKrWks5vR_JFgaJpZM4bSJzZ>.
|
|
@weinanl |
|
@hyuan3
|
|
@l-cd , Can you add "kvmgt" to /etc/modules, then re-mkinitrafs and try again? |
|
I couldn't find the /etc/modules file. My operating system is CentOS 7.6. |
it should be "file *gvt* +p", but not "file gvt +p", after you do that, it can enable the dynamic debug of gvt. |
|
I have exactly the same issue. System: Arch Linux dmesg with i915.enable_gvt=1 kvm.ignore_msrs=1 intel_iommu=on ignore_loglevel drm.debug=2 "dyndbg=file gvt +p": |
|
@l-cd: Not sure why you have closed this issue. Could you (or somebody with the required permissions) reopen it please? Thanks! |
|
@l-cd , so GVT-g can work well in your Coffee Lake machine after you find the /sys/bus/pci/devices/0000:00:02.0/mdev_supported_types folder? |
I installed Windows 10 and intel graphics driver.it work well.
|
|
[ 211.269603] iommu: Adding device 8afd6be6-3e6a-11e9-ac86-571db62e56d6 to group 0 |
@l-cd: According to the 'No such file or directory' error message, the mdev_supported_types folder was missing on your system. /sys/bus/pci/devices/0000:00:02.0/mdev_supported_types still does not exist on my system. How did you make the the missing mdev_supported_types folder appear? |
reinstall os with ubuntu. |
|
@l-cd , looks it is gm size limitation, you can try to close host desktop and create VGPU by vgpu type8. |
@TerrenceXu: Previously the SSD of my current system was running in a Kaby-Lake notebook (albeit with 4.17 stable branch), where the mdev_supported_types folder appeared. So my issue doesn't seem to host OS misconfiguration issue. Being apparently a separate problem, I have created a separate ticket (#77). |
|
@l-cd : I can select 256 and 512MB GPU ram in the host bios. With the former selection (i.e. 256MB) I see in the virtual file system only type '4' and type '8' GPUs. With the latter (i.e. 512MB) I can also see type '2'. Have you selected the maximal video-ram size in your host bios? |
What model is your motherboard? |
|
@tituslabienus What model is your motherboard? Where can choose GPU ram? Can you send a screenshot to me for reference?thanks. |
|
Hi @l-cd did you get any news about this issue? I have the same problem and even changing the MB of ram shared with the GPU in the BIOS i can't change the behaviour of GVT (1 only VM with 1920x1080 with 128mb of ram). |
|
|
I run the same host configuration on a Intel Xeon e-2176M (Coffee Lake) and now i can have 3 VM with 1920x1080, so i confirm that it's a pure hardware/bios limit. |
I was facing the same problem i.e. 1 VM with type '4' and 2 VMs with type '8'. |
|
Yes, the limited resources are Aperture size(default is 256MB)/GTT space(default is 8MB max)/Fence. |
Driver copies FW commands to the HW queue as units of 16 bytes. Some of the command structures are not exact multiple of 16. So while copying the data from those structures, the stack out of bounds messages are reported by KASAN. The following error is reported. [ 1337.530155] ================================================================== [ 1337.530277] BUG: KASAN: stack-out-of-bounds in bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re] [ 1337.530413] Read of size 16 at addr ffff888725477a48 by task rmmod/2785 [ 1337.530540] CPU: 5 PID: 2785 Comm: rmmod Tainted: G OE 5.2.0-rc6+ #75 [ 1337.530541] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014 [ 1337.530542] Call Trace: [ 1337.530548] dump_stack+0x5b/0x90 [ 1337.530556] ? bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re] [ 1337.530560] print_address_description+0x65/0x22e [ 1337.530568] ? bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re] [ 1337.530575] ? bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re] [ 1337.530577] __kasan_report.cold.3+0x37/0x77 [ 1337.530581] ? _raw_write_trylock+0x10/0xe0 [ 1337.530588] ? bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re] [ 1337.530590] kasan_report+0xe/0x20 [ 1337.530592] memcpy+0x1f/0x50 [ 1337.530600] bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re] [ 1337.530608] ? bnxt_qplib_creq_irq+0xa0/0xa0 [bnxt_re] [ 1337.530611] ? xas_create+0x3aa/0x5f0 [ 1337.530613] ? xas_start+0x77/0x110 [ 1337.530615] ? xas_clear_mark+0x34/0xd0 [ 1337.530623] bnxt_qplib_free_mrw+0x104/0x1a0 [bnxt_re] [ 1337.530631] ? bnxt_qplib_destroy_ah+0x110/0x110 [bnxt_re] [ 1337.530633] ? bit_wait_io_timeout+0xc0/0xc0 [ 1337.530641] bnxt_re_dealloc_mw+0x2c/0x60 [bnxt_re] [ 1337.530648] bnxt_re_destroy_fence_mr+0x77/0x1d0 [bnxt_re] [ 1337.530655] bnxt_re_dealloc_pd+0x25/0x60 [bnxt_re] [ 1337.530677] ib_dealloc_pd_user+0xbe/0xe0 [ib_core] [ 1337.530683] srpt_remove_one+0x5de/0x690 [ib_srpt] [ 1337.530689] ? __srpt_close_all_ch+0xc0/0xc0 [ib_srpt] [ 1337.530692] ? xa_load+0x87/0xe0 ... [ 1337.530840] do_syscall_64+0x6d/0x1f0 [ 1337.530843] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1337.530845] RIP: 0033:0x7ff5b389035b [ 1337.530848] Code: 73 01 c3 48 8b 0d 2d 0b 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fd 0a 2c 00 f7 d8 64 89 01 48 [ 1337.530849] RSP: 002b:00007fff83425c28 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 1337.530852] RAX: ffffffffffffffda RBX: 00005596443e6750 RCX: 00007ff5b389035b [ 1337.530853] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005596443e67b8 [ 1337.530854] RBP: 0000000000000000 R08: 00007fff83424ba1 R09: 0000000000000000 [ 1337.530856] R10: 00007ff5b3902960 R11: 0000000000000206 R12: 00007fff83425e50 [ 1337.530857] R13: 00007fff8342673c R14: 00005596443e6260 R15: 00005596443e6750 [ 1337.530885] The buggy address belongs to the page: [ 1337.530962] page:ffffea001c951dc0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 1337.530964] flags: 0x57ffffc0000000() [ 1337.530967] raw: 0057ffffc0000000 0000000000000000 ffffffff1c950101 0000000000000000 [ 1337.530970] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 1337.530970] page dumped because: kasan: bad access detected [ 1337.530996] Memory state around the buggy address: [ 1337.531072] ffff888725477900: 00 00 00 00 f1 f1 f1 f1 00 00 00 00 00 f2 f2 f2 [ 1337.531180] ffff888725477980: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 [ 1337.531288] >ffff888725477a00: 00 f2 f2 f2 f2 f2 f2 00 00 00 f2 00 00 00 00 00 [ 1337.531393] ^ [ 1337.531478] ffff888725477a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1337.531585] ffff888725477b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1337.531691] ================================================================== Fix this by passing the exact size of each FW command to bnxt_qplib_rcfw_send_message as req->cmd_size. Before sending the command to HW, modify the req->cmd_size to number of 16 byte units. Fixes: 1ac5a40 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1566468170-489-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Doug Ledford <dledford@redhat.com>
…zones
In case we have to migrate a ballon page to a newpage of another zone, the
managed page count of both zones is wrong. Paired with memory offlining
(which will adjust the managed page count), we can trigger kernel crashes
and all kinds of different symptoms.
One way to reproduce:
1. Start a QEMU guest with 4GB, no NUMA
2. Hotplug a 1GB DIMM and online the memory to ZONE_NORMAL
3. Inflate the balloon to 1GB
4. Unplug the DIMM (be quick, otherwise unmovable data ends up on it)
5. Observe /proc/zoneinfo
Node 0, zone Normal
pages free 16810
min 24848885473806
low 18471592959183339
high 36918337032892872
spanned 262144
present 262144
managed 18446744073709533486
6. Do anything that requires some memory (e.g., inflate the balloon some
more). The OOM goes crazy and the system crashes
[ 238.324946] Out of memory: Killed process 537 (login) total-vm:27584kB, anon-rss:860kB, file-rss:0kB, shmem-rss:00
[ 238.338585] systemd invoked oom-killer: gfp_mask=0x100cca(GFP_HIGHUSER_MOVABLE), order=0, oom_score_adj=0
[ 238.339420] CPU: 0 PID: 1 Comm: systemd Tainted: G D W 5.4.0-next-20191204+ #75
[ 238.340139] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu4
[ 238.341121] Call Trace:
[ 238.341337] dump_stack+0x8f/0xd0
[ 238.341630] dump_header+0x61/0x5ea
[ 238.341942] oom_kill_process.cold+0xb/0x10
[ 238.342299] out_of_memory+0x24d/0x5a0
[ 238.342625] __alloc_pages_slowpath+0xd12/0x1020
[ 238.343024] __alloc_pages_nodemask+0x391/0x410
[ 238.343407] pagecache_get_page+0xc3/0x3a0
[ 238.343757] filemap_fault+0x804/0xc30
[ 238.344083] ? ext4_filemap_fault+0x28/0x42
[ 238.344444] ext4_filemap_fault+0x30/0x42
[ 238.344789] __do_fault+0x37/0x1a0
[ 238.345087] __handle_mm_fault+0x104d/0x1ab0
[ 238.345450] handle_mm_fault+0x169/0x360
[ 238.345790] do_user_addr_fault+0x20d/0x490
[ 238.346154] do_page_fault+0x31/0x210
[ 238.346468] async_page_fault+0x43/0x50
[ 238.346797] RIP: 0033:0x7f47eba4197e
[ 238.347110] Code: Bad RIP value.
[ 238.347387] RSP: 002b:00007ffd7c0c1890 EFLAGS: 00010293
[ 238.347834] RAX: 0000000000000002 RBX: 000055d196a20a20 RCX: 00007f47eba4197e
[ 238.348437] RDX: 0000000000000033 RSI: 00007ffd7c0c18c0 RDI: 0000000000000004
[ 238.349047] RBP: 00007ffd7c0c1c20 R08: 0000000000000000 R09: 0000000000000033
[ 238.349660] R10: 00000000ffffffff R11: 0000000000000293 R12: 0000000000000001
[ 238.350261] R13: ffffffffffffffff R14: 0000000000000000 R15: 00007ffd7c0c18c0
[ 238.350878] Mem-Info:
[ 238.351085] active_anon:3121 inactive_anon:51 isolated_anon:0
[ 238.351085] active_file:12 inactive_file:7 isolated_file:0
[ 238.351085] unevictable:0 dirty:0 writeback:0 unstable:0
[ 238.351085] slab_reclaimable:5565 slab_unreclaimable:10170
[ 238.351085] mapped:3 shmem:111 pagetables:155 bounce:0
[ 238.351085] free:720717 free_pcp:2 free_cma:0
[ 238.353757] Node 0 active_anon:12484kB inactive_anon:204kB active_file:48kB inactive_file:28kB unevictable:0kB iss
[ 238.355979] Node 0 DMA free:11556kB min:36kB low:48kB high:60kB reserved_highatomic:0KB active_anon:152kB inactivB
[ 238.358345] lowmem_reserve[]: 0 2955 2884 2884 2884
[ 238.358761] Node 0 DMA32 free:2677864kB min:7004kB low:10028kB high:13052kB reserved_highatomic:0KB active_anon:0B
[ 238.361202] lowmem_reserve[]: 0 0 72057594037927865 72057594037927865 72057594037927865
[ 238.361888] Node 0 Normal free:193448kB min:99395541895224kB low:73886371836733356kB high:147673348131571488kB reB
[ 238.364765] lowmem_reserve[]: 0 0 0 0 0
[ 238.365101] Node 0 DMA: 7*4kB (U) 5*8kB (UE) 6*16kB (UME) 2*32kB (UM) 1*64kB (U) 2*128kB (UE) 3*256kB (UME) 2*512B
[ 238.366379] Node 0 DMA32: 0*4kB 1*8kB (U) 2*16kB (UM) 2*32kB (UM) 2*64kB (UM) 1*128kB (U) 1*256kB (U) 1*512kB (U)B
[ 238.367654] Node 0 Normal: 1985*4kB (UME) 1321*8kB (UME) 844*16kB (UME) 524*32kB (UME) 300*64kB (UME) 138*128kB (B
[ 238.369184] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
[ 238.369915] 130 total pagecache pages
[ 238.370241] 0 pages in swap cache
[ 238.370533] Swap cache stats: add 0, delete 0, find 0/0
[ 238.370981] Free swap = 0kB
[ 238.371239] Total swap = 0kB
[ 238.371488] 1048445 pages RAM
[ 238.371756] 0 pages HighMem/MovableOnly
[ 238.372090] 306992 pages reserved
[ 238.372376] 0 pages cma reserved
[ 238.372661] 0 pages hwpoisoned
In another instance (older kernel), I was able to observe this
(negative page count :/):
[ 180.896971] Offlined Pages 32768
[ 182.667462] Offlined Pages 32768
[ 184.408117] Offlined Pages 32768
[ 186.026321] Offlined Pages 32768
[ 187.684861] Offlined Pages 32768
[ 189.227013] Offlined Pages 32768
[ 190.830303] Offlined Pages 32768
[ 190.833071] Built 1 zonelists, mobility grouping on. Total pages: -36920272750453009
In another instance (older kernel), I was no longer able to start any
process:
[root@vm ~]# [ 214.348068] Offlined Pages 32768
[ 215.973009] Offlined Pages 32768
cat /proc/meminfo
-bash: fork: Cannot allocate memory
[root@vm ~]# cat /proc/meminfo
-bash: fork: Cannot allocate memory
Fix it by properly adjusting the managed page count when migrating if
the zone changed. The managed page count of the zones now looks after
unplug of the DIMM (and after deflating the balloon) just like before
inflating the balloon (and plugging+onlining the DIMM).
We'll temporarily modify the totalram page count. If this ever becomes a
problem, we can fine tune by providing helpers that don't touch
the totalram pages (e.g., adjust_zone_managed_page_count()).
Please note that fixing up the managed page count is only necessary when
we adjusted the managed page count when inflating - only if we
don't have VIRTIO_BALLOON_F_DEFLATE_ON_OOM. With that feature, the
managed page count is not touched when inflating/deflating.
Reported-by: Yumei Huang <yuhuang@redhat.com>
Fixes: 3dcc057 ("mm: correctly update zone->managed_pages")
Cc: <stable@vger.kernel.org> # v3.11+
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
…abled When booting a kernel which has been built with CONFIG_AMD_MEM_ENCRYPT enabled as a Xen pv guest a warning is issued for each processor: [ 5.964347] ------------[ cut here ]------------ [ 5.968314] WARNING: CPU: 0 PID: 1 at /home/gross/linux/head/arch/x86/xen/enlighten_pv.c:660 get_trap_addr+0x59/0x90 [ 5.972321] Modules linked in: [ 5.976313] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.11.0-rc5-default #75 [ 5.980313] Hardware name: Dell Inc. OptiPlex 9020/0PC5F7, BIOS A05 12/05/2013 [ 5.984313] RIP: e030:get_trap_addr+0x59/0x90 [ 5.988313] Code: 42 10 83 f0 01 85 f6 74 04 84 c0 75 1d b8 01 00 00 00 c3 48 3d 00 80 83 82 72 08 48 3d 20 81 83 82 72 0c b8 01 00 00 00 eb db <0f> 0b 31 c0 c3 48 2d 00 80 83 82 48 ba 72 1c c7 71 1c c7 71 1c 48 [ 5.992313] RSP: e02b:ffffc90040033d38 EFLAGS: 00010202 [ 5.996313] RAX: 0000000000000001 RBX: ffffffff82a141d0 RCX: ffffffff8222ec38 [ 6.000312] RDX: ffffffff8222ec38 RSI: 0000000000000005 RDI: ffffc90040033d40 [ 6.004313] RBP: ffff8881003984a0 R08: 0000000000000007 R09: ffff888100398000 [ 6.008312] R10: 0000000000000007 R11: ffffc90040246000 R12: ffff8884082182a8 [ 6.012313] R13: 0000000000000100 R14: 000000000000001d R15: ffff8881003982d0 [ 6.016316] FS: 0000000000000000(0000) GS:ffff888408200000(0000) knlGS:0000000000000000 [ 6.020313] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.024313] CR2: ffffc900020ef000 CR3: 000000000220a000 CR4: 0000000000050660 [ 6.028314] Call Trace: [ 6.032313] cvt_gate_to_trap.part.7+0x3f/0x90 [ 6.036313] ? asm_exc_double_fault+0x30/0x30 [ 6.040313] xen_convert_trap_info+0x87/0xd0 [ 6.044313] xen_pv_cpu_up+0x17a/0x450 [ 6.048313] bringup_cpu+0x2b/0xc0 [ 6.052313] ? cpus_read_trylock+0x50/0x50 [ 6.056313] cpuhp_invoke_callback+0x80/0x4c0 [ 6.060313] _cpu_up+0xa7/0x140 [ 6.064313] cpu_up+0x98/0xd0 [ 6.068313] bringup_nonboot_cpus+0x4f/0x60 [ 6.072313] smp_init+0x26/0x79 [ 6.076313] kernel_init_freeable+0x103/0x258 [ 6.080313] ? rest_init+0xd0/0xd0 [ 6.084313] kernel_init+0xa/0x110 [ 6.088313] ret_from_fork+0x1f/0x30 [ 6.092313] ---[ end trace be9ecf17dceeb4f3 ]--- Reason is that there is no Xen pv trap entry for X86_TRAP_VC. Fix that by adding a generic trap handler for unknown traps and wire all unknown bare metal handlers to this generic handler, which will just crash the system in case such a trap will ever happen. Fixes: 0786138 ("x86/sev-es: Add a Runtime #VC Exception Handler") Cc: <stable@vger.kernel.org> # v5.10 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
|
I wish this weren't closed because it's still broken. I am having the same issue. I have my GPU aperture set to 1024MB, max allowed and I am getting the same error. Available types shows 4 and 8, but I can't create any. Like others, I am getting same firmware error and same memory error. I am using an i7-9900k on an Asus motherboard. I used to have this working on a mainline 5.15 kernel ages ago. |
I have an i5 8400, but I compiled the latest version(gvt-staging), and I don't see any supporting features.
The text was updated successfully, but these errors were encountered: