Skip to content

S3 Mode GPU Hang: 4.14.170-intel-lts-base #13

@ionutnechita

Description

@ionutnechita

Hi Intel Kernel Team,

Using S3, observe issue with i915 drm.

My environment:
Ubuntu 20.04 LTS
Intel NUC NUC7i7BNH Gen7 I7
Linux os1 4.14.170-intel-lts-base #1 SMP PREEMPT Thu Jun 25 15:08:54 EEST 2020 x86_64 x86_64 x86_64 GNU/Linux
xserver-xorg-video-intel 2:2.99.917+git20200226-1
xorg-server 2:1.20.8-2ubuntu2.1

X.Org X Server 1.20.8
X Protocol Version 11, Revision 0

Issue:

dmesg
<cut output/snip>
[ 221.094727] PM: suspend entry (deep)
[ 221.094729] PM: Syncing filesystems ... done.
[ 221.103645] Freezing user space processes ... (elapsed 0.024 seconds) done.
[ 221.128088] OOM killer disabled.
[ 221.128089] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 221.129225] Suspending console(s) (use no_console_suspend to debug)
[ 221.129823] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 221.130172] sd 0:0:0:0: [sda] Stopping disk
[ 221.130796] e1000e: EEE TX LPI TIMER: 00000011
[ 221.347571] ACPI: EC: interrupt blocked
[ 221.380822] ACPI: Preparing to enter system sleep state S3
[ 221.382084] ACPI: EC: event blocked
[ 221.382085] ACPI: EC: EC stopped
[ 221.382086] PM: Saving platform NVS memory
[ 221.382137] Disabling non-boot CPUs ...
[ 221.388487] IRQ fixup: irq 122 move in progress, old vector 145
[ 221.388503] IRQ 128: no longer affine to CPU1
[ 221.389564] smpboot: CPU 1 is now offline
[ 221.404791] IRQ 127: no longer affine to CPU2
[ 221.406563] smpboot: CPU 2 is now offline
[ 221.420462] IRQ 123: no longer affine to CPU3
[ 221.421494] smpboot: CPU 3 is now offline
[ 221.426917] ACPI: Low-level resume complete
[ 221.427027] ACPI: EC: EC started
[ 221.427028] PM: Restoring platform NVS memory
[ 221.429421] Enabling non-boot CPUs ...
[ 221.429470] x86: Booting SMP configuration:
[ 221.429471] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 221.431332] microcode: sig=0x806e9, pf=0x40, revision=0x9a
[ 221.432902] microcode: updated to revision 0xd6, date = 2020-04-27
[ 221.433039] cache: parent cpu1 should not be sleeping
[ 221.433211] CPU1 is up
[ 221.433235] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 221.433659] microcode: sig=0x806e9, pf=0x40, revision=0xd6
[ 221.433799] cache: parent cpu2 should not be sleeping
[ 221.434254] CPU2 is up
[ 221.434280] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 221.434780] cache: parent cpu3 should not be sleeping
[ 221.434977] CPU3 is up
[ 221.438763] ACPI: Waking up from system sleep state S3
[ 221.444431] ACPI: EC: interrupt unblocked
[ 221.444457] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[ 221.456093] pcieport 0000:00:1c.5: Intel SPT PCH root port ACS workaround enabled
[ 221.456402] pcieport 0000:00:1c.7: Intel SPT PCH root port ACS workaround enabled
[ 221.469562] ACPI: EC: event unblocked
[ 221.471678] sd 0:0:0:0: [sda] Starting disk
[ 221.693839] iwlwifi 0000:3a:00.0: BIOS contains WGDS but no WRDS
[ 221.778446] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 221.780061] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 221.780064] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 221.780066] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 221.780212] ata1.00: supports DRM functions and may not be fully accessible
[ 221.782070] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 221.782073] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 221.782075] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 221.782142] ata1.00: supports DRM functions and may not be fully accessible
[ 221.782614] ata1.00: configured for UDMA/133
[ 221.916461] [drm] GuC submission enabled (firmware i915/kbl_guc_ver9_14.bin [version 9.14])
[ 221.931036] acpi LNXPOWER:00: Turning OFF
[ 221.931112] OOM killer enabled.
[ 221.931113] Restarting tasks ... done.
[ 221.941322] video LNXVIDEO:00: Restoring backlight state
[ 221.941325] PM: suspend exit
[ 222.123203] e1000e: eno1 NIC Link is Down
[ 222.146704] [drm] RC6 on
[ 222.179433] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 222.386979] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 222.389509] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 222.614717] iwlwifi 0000:3a:00.0: BIOS contains WGDS but no WRDS
[ 222.616216] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 222.669194] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 227.223260] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 227.223315] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 229.739070] [drm] GPU HANG: ecode 9:0:0xfffffffe, in gnome-shell [1464], reason: hang on rcs0, action: reset
[ 229.739104] i915 0000:00:02.0: Resetting chip for hang on rcs0
[ 229.739186] [drm] RC6 on
[ 229.741227] [drm] GuC submission enabled (firmware i915/kbl_guc_ver9_14.bin [version 9.14])
[ 237.730948] i915 0000:00:02.0: Resetting chip for hang on rcs0
[ 237.731081] [drm] RC6 on
[ 237.733778] [drm] GuC submission enabled (firmware i915/kbl_guc_ver9_14.bin [version 9.14])
[ 245.730958] i915 0000:00:02.0: Resetting chip for hang on rcs0
[ 245.731119] [drm] RC6 on
[ 245.737366] [drm] GuC submission enabled (firmware i915/kbl_guc_ver9_14.bin [version 9.14])
[ 253.730915] i915 0000:00:02.0: Resetting chip for hang on rcs0
[ 253.731057] [drm] RC6 on
[ 253.733252] [drm] GuC submission enabled (firmware i915/kbl_guc_ver9_14.bin [version 9.14])
[ 261.730938] i915 0000:00:02.0: Resetting chip for hang on rcs0
[ 261.731082] [drm] RC6 on
[ 261.733476] [drm] GuC submission enabled (firmware i915/kbl_guc_ver9_14.bin [version 9.14])

kernel config file
config-4.14.170-intel-lts-base.txt

journalctl x11 suspend
x11suspend.txt

Metadata

Metadata

Assignees

No one assigned

    Labels

    No labels
    No labels

    Type

    No type

    Projects

    No projects

    Milestone

    No milestone

    Relationships

    None yet

    Development

    No branches or pull requests

    Issue actions