Welcome to the WunderBar Hardware Schematics and Layout repository. This repository contains the latest version of the WunderBar hardware design. The WunderBar is manufactured by MikroElektronika. Manufacturing was sponsored by Conrad Electronics.
Here you will find everything you need to build your own version of the WunderBar. We encourage you to share, modify, extend and improve the existing design. Please reach out to us if you have any questions or need any help. We are eager to hear your feedback about the design, and suggestions as to how we might improve it.
In the /Datasheets folder you will find the relevant data sheets for the micro controller units (MCUs), the sensors and the additional circuitry, separated by module type.
The complete project for Altium Designer TM is located in the AltiumDesignerProject folder.
For a quick overview of the schematics for the Master Module and the 6 BLE modules, see the WunderBar Schematics v1_3.pdf file.
A PDF output of the PCB Layout can be found under Wunderbar Layout.pdf. For a detailed view of the different layers and connections see the Altium project.
The Bill of Materials v1_3 sheet details the components' names, quantities, the suppliers' names and part numbers. See also the two files under /Manufacturing/BillOfMaterials for a list view of the information in the Schematics file.
The Gerber files output and the 'Pick and Place' configuration files are located inside the /Manufacturing folder.
- To get the entire repository, download it as a .zip file from here.
or
-
If you have git installed simply access the folder where you want to download it and enter the following command:
git clone https://github.com/relayr/wunderbar-hardware.git
We hope that you'd utilize the Wunderbar in your future projects. The realm of possibilities is as vast as your imagination!!!
Copyright (c) 2014, Press Any Key UG and iThings4U GmbH
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGE.