RSSI-DEVICE > 127 Warnung #402

dotcom84 · 2021-10-22T11:37:36Z

Für einige meiner Geräte (u.a. eine Außensirene) bekomme ich periodisch folgende Zeilen ins Log-File geschrieben:

State value to set for "hm-rpc.0.00209AXXXXXXXX.0.RSSI_DEVICE" has value "128" greater than max "127"

The text was updated successfully, but these errors were encountered:

whitecapx · 2021-11-23T20:40:07Z

Same here - ich habe es zum ersten Mal festgestellt, nachdem ich einen alten HMIP-HAP als zusätzliches LAN Gateway an meiner CCU3 angelernt habe. Vorher habe ich den Fehler im ioBroker nie gesehen.

Negalein · 2021-11-25T07:38:07Z

dito

State value to set for "hm-rpc.0.00019BE98BA026.0.RSSI_DEVICE" has value "128" greater than max "127"
State value to set for "hm-rpc.0.00115A49A5B2BE.0.RSSI_DEVICE" has value "128" greater than max "127"

Namborner · 2021-11-25T18:24:44Z

Das gleiche Problem haben ich auch. Was kann ich dagegen tun?

h.

JackDaniel007 · 2021-11-29T11:28:01Z

das selbe auch beim diesem datenpunkt
hm-rpc.1
29941 2021-11-29 12:19:56.765 warn State value to set for "hm-rpc.1.CUX3500001.0.RSSI_PEER" has value "86" greater than max "0"

Christoph-sans-e · 2021-12-14T07:55:26Z

Ich habe da Wandthermostate als auch Rollladenaktoren, die das verursachen. Gibt es hierfür schon eine Lösung?

afuerhoff · 2021-12-18T13:33:09Z

Das selbe bei mir. Wenn ich dann nach dem Objekt sehe ist aber alles ok. Scheint nur sehr kurz aufzutreten.

State value to set for "hm-rpc.3.00109D898C36F4.0.RSSI_DEVICE" has value "128" greater than max "127"

State value to set for "hm-rpc.3.0014DA499ED74A.0.RSSI_DEVICE" has value "128" greater than max "127"

State value to set for "hm-rpc.3.000BD569A36B4E.0.RSSI_DEVICE" has value "128" greater than max "127"

foxriver76 · 2021-12-18T14:19:32Z

Kann mal jemand so ein Objekt zeigen mit native etc und dazu die hm-rpc Version

afuerhoff · 2021-12-18T15:58:35Z

hm-rpc Version 1.14.50

{
"_id": "hm-rpc.3.00109D898C36F4",
"type": "device",
"common": {
"name": "EG.WoZi.FS2",
"icon": "/icons/152_hmip-swdo-i_thumb.png"
},
"native": {
"TYPE": "HmIP-SWDO-I",
"SUBTYPE": "SWDO-I",
"ADDRESS": "00109D898C36F4",
"RF_ADDRESS": 4205136,
"CHILDREN": [
"00109D898C36F4:0",
"00109D898C36F4:1",
"00109D898C36F4:2"
],
"PARENT": "",
"PARENT_TYPE": "",
"INDEX": 0,
"AES_ACTIVE": 1,
"PARAMSETS": [
"MASTER",
"SERVICE"
],
"FIRMWARE": "1.16.10",
"AVAILABLE_FIRMWARE": "0.0.0",
"UPDATABLE": true,
"FIRMWARE_UPDATE_STATE": "UP_TO_DATE",
"VERSION": 2,
"FLAGS": 1,
"LINK_SOURCE_ROLES": "",
"LINK_TARGET_ROLES": "",
"DIRECTION": 0,
"GROUP": "",
"TEAM": "",
"TEAM_TAG": "",
"TEAM_CHANNELS": [],
"INTERFACE": "",
"ROAMING": 0,
"RX_MODE": 4
},
"from": "system.adapter.hm-rega.0",
"user": "system.user.admin",
"ts": 1637318871734,
"acl": {
"object": 1636,
"owner": "system.user.admin",
"ownerGroup": "system.group.administrator"
}
}

foxriver76 · 2021-12-18T18:15:58Z

Danke, der Dp ist allerdings leider vom Device und nicht der rssi State. Bitte den posten.

afuerhoff · 2021-12-18T18:33:58Z

Sorry. Ich hoffe jetzt ist es richtig.

{
"type": "state",
"common": {
"name": "EG.WoZi.FS2:0.RSSI_DEVICE",
"def": 0,
"type": "number",
"read": true,
"write": false,
"min": -128,
"max": 127,
"unit": "dBm",
"role": "value.rssi"
},
"native": {
"MIN": -128,
"OPERATIONS": 5,
"MAX": 127,
"FLAGS": 1,
"ID": "RSSI_DEVICE",
"TYPE": "INTEGER",
"DEFAULT": 0
},
"from": "system.adapter.hm-rega.0",
"user": "system.user.admin",
"ts": 1637318871779,
"_id": "hm-rpc.3.00109D898C36F4.0.RSSI_DEVICE",
"acl": {
"object": 1636,
"state": 1636,
"owner": "system.user.admin",
"ownerGroup": "system.group.administrator"
}
}

Christoph-sans-e · 2021-12-20T13:00:48Z

{
"type": "state",
"common": {
"def": 0,
"type": "number",
"read": true,
"write": false,
"min": -128,
"max": 127,
"unit": "dBm",
"role": "value.rssi",
"name": "Rollladen Fitness:0.RSSI_DEVICE"
},
"native": {
"MIN": -128,
"OPERATIONS": 5,
"MAX": 127,
"FLAGS": 1,
"ID": "RSSI_DEVICE",
"TYPE": "INTEGER",
"DEFAULT": 0,
"UNIT": "dBm"
},
"from": "system.adapter.hm-rega.0",
"user": "system.user.admin",
"ts": 1604853537248,
"_id": "hm-rpc.1.001118A9AC0AB3.0.RSSI_DEVICE"
}

JayVee2 · 2021-12-27T08:45:48Z

Dito, Problem: Werte werden nicht in die Datenbank geschrieben.

Baenker · 2021-12-27T17:04:43Z

#346

ChristianWieck1977 · 2022-01-28T09:11:16Z

Hallo zusammen,
ich habe auch seit Monaten regelmäßig vergleichbare Meldungen - egal ob Homematic oder HUE Geräte - z.B.

hm-rpc.2	2022-01-28 09:47:33.012	warn	State value to set for "hm-rpc.2.HU-Hue_play_2.1.WHITE" has value "530000" greater than max "100"
hm-rpc.2	2022-01-28 09:47:32.980	warn	State value to set for "hm-rpc.2.HU-Hue_play_1.1.WHITE" has value "530000" greater than max "100"
hm-rpc.2	2022-01-28 09:47:22.930	warn	State value to set for "hm-rpc.2.HU-Hue_Play_3.1.WHITE" has value "200000" greater than max "100"
hm-rpc.2	2022-01-28 09:47:22.890	warn	State value to set for "hm-rpc.2.HU-Hue_play_2.1.WHITE" has value "340000" greater than max "100"
hm-rpc.2	2022-01-28 09:47:22.864	warn	State value to set for "hm-rpc.2.HU-Hue_play_1.1.WHITE" has value "530000" greater than max "100"

FreunderNacht · 2022-01-29T15:05:13Z

Hi,
bei mir auch das selbe Problem:

hm-rpc.0	2022-01-29 15:28:17.933	warn	State value to set for "hm-rpc.0.00185BE9922B49.0.RSSI_DEVICE" has value "128" greater than max "127"
hm-rpc.0	2022-01-29 15:26:15.700	warn	State value to set for "hm-rpc.0.00185BE9922B49.0.RSSI_DEVICE" has value "128" greater than max "127"
hm-rpc.0	2022-01-29 15:23:59.202	warn	State value to set for "hm-rpc.0.00185BE9922B49.0.RSSI_DEVICE" has value "128" greater than max "127"
hm-rpc.0	2022-01-29 15:19:28.652	warn	State value to set for "hm-rpc.0.00185BE9922B49.0.RSSI_DEVICE" has value "128" greater than max "127"
hm-rpc.0	2022-01-29 15:08:28.913	warn	State value to set for "hm-rpc.0.00185BE9922B49.0.RSSI_DEVICE" has value "128" greater than max "127"
hm-rpc.0	2022-01-29 15:05:35.445	warn	State value to set for "hm-rpc.0.00185BE9922B49.0.RSSI_DEVICE" has value "128" greater than max "127"
hm-rpc.0	2022-01-29 15:00:06.648	warn	State value to set for "hm-rpc.0.000A9709AABD30.0.RSSI_DEVICE" has value "128" greater than max "127"

{ "type": "state", "common": { "name": "Wetterstation:0.RSSI_DEVICE", "def": 0, "type": "number", "read": true, "write": false, "min": -128, "max": 127, "unit": "dBm", "role": "value.rssi" }, "native": { "MIN": -128, "OPERATIONS": 5, "MAX": 127, "FLAGS": 1, "ID": "RSSI_DEVICE", "TYPE": "INTEGER", "DEFAULT": 0 }, "from": "system.adapter.hm-rega.0", "user": "system.user.admin", "ts": 1608563413062, "_id": "hm-rpc.0.00185BE9922B49.0.RSSI_DEVICE", "acl": { "object": 1636, "state": 1636, "owner": "system.user.admin", "ownerGroup": "system.group.administrator" } }

"type": "state", "common": { "name": "Wandthermostat Küche:0.RSSI_DEVICE", "def": 0, "type": "number", "read": true, "write": false, "min": -128, "max": 127, "unit": "dBm", "role": "value.rssi" }, "native": { "MIN": -128, "OPERATIONS": 5, "MAX": 127, "FLAGS": 1, "ID": "RSSI_DEVICE", "TYPE": "INTEGER", "DEFAULT": 0 }, "from": "system.adapter.hm-rega.0", "user": "system.user.admin", "ts": 1608563413873, "_id": "hm-rpc.0.000A9709AABD30.0.RSSI_DEVICE", "acl": { "object": 1636, "state": 1636, "owner": "system.user.admin", "ownerGroup": "system.group.administrator" } }

* (foxriver76) implemented workaround for the RSSI_DEVICE 128 bug if devices connect to HMIP-HAP (fixes #346, #469, #402)

JayVee2 · 2022-03-14T10:34:36Z

Hinweis: Ich habe heute auf die V1.15.8 aktualisiert und der Warning kommt noch.

foxriver76 · 2022-03-14T10:42:31Z

Objekte müssen neu angelegt werden, z. B. durch einen neu einlesen run

JayVee2 · 2022-03-14T11:33:05Z

OK, danke.

Negalein · 2022-03-25T20:12:24Z

hab heute mit 1.15.12 wieder den Fehler bekommen.

hm-rpc.0 | 2022-03-25 21:03:24.075 | warn | State value to set for "hm-rpc.0.000E5BE9A05450.0.RSSI_DEVICE" has value "128" greater than max "127"

Neu einlesen brachte nichts

gogo-111 · 2022-05-08T17:14:42Z

Ich habe auch noch immer das Problem bei mir taucht es auch der erste mal auf nachdem ich einen alten HMIP-HAP als zusätzliches LAN Gateway an meiner CCU3 angelernt habe. Vorher habe ich den Fehler im ioBroker nie gesehen.

ChristianWieck1977 · 2022-12-08T15:31:20Z

Gibt es Neuigkeiten zu der Fehlermeldung ?
Mein Iobroker Log ist weiter voll mit solchen Meldungen:
`

hm-rpc.2	2022-12-08 15:43:28.049	warn	State value to set for "hm-rpc.2.HU-Hue_lightst.1.WHITE" has value "405000" greater than max "100"
hm-rpc.2	2022-12-08 15:43:28.033	warn	State value to set for "hm-rpc.2.HU-Hue_light02.1.WHITE" has value "405000" greater than max "100"
hm-rpc.2	2022-12-08 15:43:28.019	warn	State value to set for "hm-rpc.2.HU-Hue_light01.1.WHITE" has value "405000" greater than max "100"
hm-rpc.2	2022-12-08 15:29:08.999	warn	State value to set for "hm-rpc.2.HU-Hue_light01.1.WHITE" has value "405000" greater than max "100"
hm-rpc.2	2022-12-08 15:28:58.891	warn	State value to set for "hm-rpc.2.HU-Hue_light02.1.WHITE" has value "405000" greater than max "100"
hm-rpc.2	2022-12-08 15:28:48.784	warn	State value to set for "hm-rpc.2.HU-Hue_lightst.1.WHITE" has value "405000" greater than max "100"
hm-rpc.2	2022-12-08 15:28:38.690	warn	State value to set for "hm-rpc.2.HU-Hue_lightst.1.WHITE" has value "400000" greater than max "100"
hm-rpc.2	2022-12-08 15:28:38.672	warn	State value to set for "hm-rpc.2.HU-Hue_light02.1.WHITE" has value "400000" greater than max "100"
hm-rpc.2	2022-12-08 15:28:38.656	warn	State value to set for "hm-rpc.2.HU-Hue_light01.1.WHITE" has value "400000" greater than max "100"
hm-rpc.2	2022-12-08 15:28:28.560	warn	State value to set for "hm-rpc.2.HU-Hue_light02.1.WHITE" has value "645000" greater than max "100"
hm-rpc.2	2022-12-08 15:28:28.545	warn	State value to set for "hm-rpc.2.HU-Hue_light01.1.WHITE" has value "645000" greater than max "100"
hm-rpc.2	2022-12-08 15:28:18.466	warn	State value to set for "hm-rpc.2.HU-Hue_lightst.1.WHITE" has value "645000" greater than max "100"
hm-rpc.2	2022-12-08 15:28:18.450	warn	State value to set for "hm-rpc.2.HU-Hue_light02.1.WHITE" has value "645000" greater than max "100"
hm-rpc.2	2022-12-08 15:28:18.434	warn	State value to set for "hm-rpc.2.HU-Hue_light01.1.WHITE" has value "645000" greater than max "100"
hm-rpc.2	2022-12-08 15:23:45.642	warn	State value to set for "hm-rpc.2.HU-Hue_lightst.1.WHITE" has value "200000" greater than max "100"
hm-rpc.2	2022-12-08 15:23:45.618	warn	State value to set for "hm-rpc.2.HU-Hue_light02.1.WHITE" has value "200000" greater than max "100"
hm-rpc.2	2022-12-08 15:23:45.603	warn	State value to set for "hm-rpc.2.HU-Hue_light01.1.WHITE" has value "200000" greater than max "100"

`

ChristianWieck1977 · 2022-12-08T15:34:02Z

Beim Neueinlesen erfolgt mittlerweile folgende Ergänzung im LOG:

warn	This object will not be created in future versions. Please report this to the developer.

warn	Object HU-Hue_light02.1.WHITE is invalid: obj.common.min (2000) needs to be less than or equal to obj.common.max (100)

foxriver76 added a commit that referenced this issue Feb 16, 2022

chore: release v1.15.6

3e6cb15

* (foxriver76) implemented workaround for the RSSI_DEVICE 128 bug if devices connect to HMIP-HAP (fixes #346, #469, #402)

foxriver76 closed this as completed Feb 16, 2022

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

RSSI-DEVICE > 127 Warnung #402

RSSI-DEVICE > 127 Warnung #402

dotcom84 commented Oct 22, 2021

whitecapx commented Nov 23, 2021

Negalein commented Nov 25, 2021

Namborner commented Nov 25, 2021 •

edited

Loading

JackDaniel007 commented Nov 29, 2021

Christoph-sans-e commented Dec 14, 2021

afuerhoff commented Dec 18, 2021

foxriver76 commented Dec 18, 2021

afuerhoff commented Dec 18, 2021

foxriver76 commented Dec 18, 2021

afuerhoff commented Dec 18, 2021

Christoph-sans-e commented Dec 20, 2021

JayVee2 commented Dec 27, 2021

Baenker commented Dec 27, 2021

ChristianWieck1977 commented Jan 28, 2022

FreunderNacht commented Jan 29, 2022

JayVee2 commented Mar 14, 2022 •

edited

Loading

foxriver76 commented Mar 14, 2022

JayVee2 commented Mar 14, 2022

Negalein commented Mar 25, 2022 •

edited

Loading

gogo-111 commented May 8, 2022

ChristianWieck1977 commented Dec 8, 2022

ChristianWieck1977 commented Dec 8, 2022 •

edited

Loading

RSSI-DEVICE > 127 Warnung #402

RSSI-DEVICE > 127 Warnung #402

Comments

dotcom84 commented Oct 22, 2021

whitecapx commented Nov 23, 2021

Negalein commented Nov 25, 2021

Namborner commented Nov 25, 2021 • edited Loading

JackDaniel007 commented Nov 29, 2021

Christoph-sans-e commented Dec 14, 2021

afuerhoff commented Dec 18, 2021

State value to set for "hm-rpc.3.00109D898C36F4.0.RSSI_DEVICE" has value "128" greater than max "127"

foxriver76 commented Dec 18, 2021

afuerhoff commented Dec 18, 2021

foxriver76 commented Dec 18, 2021

afuerhoff commented Dec 18, 2021

Christoph-sans-e commented Dec 20, 2021

JayVee2 commented Dec 27, 2021

Baenker commented Dec 27, 2021

ChristianWieck1977 commented Jan 28, 2022

FreunderNacht commented Jan 29, 2022

JayVee2 commented Mar 14, 2022 • edited Loading

foxriver76 commented Mar 14, 2022

JayVee2 commented Mar 14, 2022

Negalein commented Mar 25, 2022 • edited Loading

gogo-111 commented May 8, 2022

ChristianWieck1977 commented Dec 8, 2022

ChristianWieck1977 commented Dec 8, 2022 • edited Loading

Namborner commented Nov 25, 2021 •

edited

Loading

JayVee2 commented Mar 14, 2022 •

edited

Loading

Negalein commented Mar 25, 2022 •

edited

Loading

ChristianWieck1977 commented Dec 8, 2022 •

edited

Loading